Character data type not accepting name

Hi all! i have declared a characteristic object as "CHAR". But when i have given input as "ram" it is throwing the error "special characters not allowed". I have not given any special character. Can somebody help me out in this issue?

In BI system use t-code RSKC then you get screen with Permitted extra characters then enter ALL_CAPITAL then click on execute button. You can allowed characters in the table RSALLOWEDCHAR.
It seems your problem is you are loading small case letters into your infoobject. By default characteristic does not allow lower case letters, to allow lowercase letters--- open the characteristic --- In general tab -
check the ckeckbox for Lowercase letters.

Similar Messages

  • ERROR OGG-01148 programming error, data type not supported for column

    I am getting following error when I put null in insert statement
    2011-03-31 18:30:45 ERROR OGG-01148 programming error, data type not supported for column TXID in table advoss.tblaudittrail.
    I am replicating MySQL 5.5.9 to Oracle 11g rel2 via goldengate 11

    I am able to diagnose what is cuasing the problem
    unsigned flag was the culprit of this error
    I am able to insert null after removing unsigned flag.
    thank you very much for your kind support

  • HT1918 I updated my payment method because I changed my Internet MasterCard of the same number but  new expiry date but not accepted , can you help me

    Please I need help regarding this problem I faced today.
    I updated my payment method because I changed my Internet MasterCard of the same number but  new expiry date but not accepted , can you help me?

    Is the iPhone jailbroken or was jailbroken?. In the article " http://support.apple.com/kb/TS3694 " it says:
    Errors related to downgrading iOS
    The required resource can't be found: This alert message occurs when your device has a newer version of iOS than what is available in iTunes. When troubleshooting a device that presents this alert message, go toSettings > General > About and check the version of iOS on the device. If it's newer than the latest released iOS version, the device may have a prerelease developer version of iOS installed. Installing an older version of iOS over a newer version isn't supported.
    Error 1015: This error is typically caused by attempts to downgrade the software for an iPhone, iPad, or iPod touch. This can occur when you attempt to restore using an older .ipsw file. Downgrading to a previous version isn't supported. To resolve this issue, attempt to restore with the latest iPhone, iPad, or iPod touch software available from Apple. This error can also occur when an unauthorized modification of the iOS has occurred and you're now trying to restore to an authorized, default state.

  • How  create data type for coulmn name having special characters in IR

    hi ,
    any idea how to create how to do create data type for coulmn name having special characters

    Hi Amit,
    Can you ellaborate ?
    Actually if you are reading a file(or anything else) which contains special characters, the data type can be created as done for other interfaces. But it is in the adapters that we actually take care of handling these special characters.
    ShabZ

  • After power on will not accept name and password

    Having trouble with MacBook Mac OS X 10.6.8
    At start up will not accept name and or password. Gives IP address info then network accounts unavailable.

    Hi Beebop1991,
    I'm sorry to hear you are having issues with your Administrator User account and password.
    It sounds like your computer is booting up to a network drive instead of your Macintosh HD.
    If this is the case, follow these steps:
    Startup Manager: How to select a startup volume
    Follow these steps:
    Turn on, or restart, your Mac.
    Immediately press and hold the Option key. After a few seconds, the Startup Manager should appear. The Startup Manager scans for available available volumes.
    Use the left and right arrow keys on the keyboard to select the volume you would like to use.
    Press the Return key on your keyboard to start up the computer from the volume you selected.
    If this does not resolve your issue, and you need to change your Administrator password, follow the steps below for Snow Leopard:
    OS X: Changing or resetting an account password
    In Mac OS X v10.6.8 or earlier, follow these steps to reset a password when there is only one administrator account on the computer, or if the original administrator account needs a password reset. "Original" administrator account refers to the one that was created immediately after installing Mac OS X. If the original administrator password is known, that administrator account may be used to reset the passwords of other administrator accounts using the steps described above. These steps require an optical drive; if your Mac does not have an optical drive and you have a Mac OS X v10.6 Install disc, see below.
    Start up from a Mac OS X Install disc (one whose version is closest to the version of Mac OS X installed).  Usually, you can start from the disc by putting it in your computer, restarting, and holding the C key. Or, put it in the computer and click the Install or Restore icon you see in the disc's main window (after which the computer will start from the disc without you needing to hold C). Or, you can use Startup Manager or the Startup Disk preference pane to select the Install disc.
    Choose a language, click the arrow button to continue,
    Mac OS X v10.6 or later: Choose Password Reset from the Utilities menu.
    Mac OS X v10.5 or v10.4: Choose Reset Password from the Utilities menu.
    Mac OS X v10.3: Choose Reset Password from the Installer menu.
    Tip: If you don't see this menu or menu choice, you're probably not started from the disc yet.
    Note: The default keyboard layout is U.S. English while started from the installation disc. If you use a keyboard layout other than U.S English, use the Input menu (the flag icon on the right side of the menu bar) to select the desired layout before typing a new password.
    Select your Mac OS X hard disk volume.
    Select the user name of your original administrator account.
    Important: Do not select "System Administrator (root)". This is actually the root user. You should not confuse it with a normal administrator account.
    Enter a new password.
    Click Save.
    Click the red button in the upper left corner to quit the application.
    Choose Quit Mac OS X Installer... from the Mac OS X Installer menu.
    Click Restart.
    After following these steps, you'll want to also follow the steps in this article.
    Mac OS X v10.6: Resetting the original administrator account password on a Mac that has no optical drive
    These steps require a second computer that has an optical drive.Note: If the second computer is a Mac, make sure Mac OS X v10.5.3 or later is installed. If the second computer is a PC, make sure the DVD or CD Sharing Update 1.0 for Windows is installed.
    Open "Remote Install Mac OS X" from the Utilities folder.
    Follow the onscreen instructions.
    For more information, see Sharing DVDs or CDs with Remote Disc.
    Additional Information
    You can press the Eject key on the keyboard to eject DVD media.  Inserting a startup DVD will add that DVD to the list of startup volumes (as in the image above).  You can also attach FireWire or USB external hard drives to add to the list of startup volumes.
    This startup volume selection is temporary.  To set the default startup volume for your Mac after your computer is running, open System Preferences and choose Startup Disk from the View menu (in Mac OS X) or open the Boot Camp control panel (in Windows).
    I hope you are back on track soon!
    - Judy

  • I contacted the itunes store support and asked for  an explanation of a refund and then my first name (for the account data) was not accepted - though correct - only when cancelling the second name it went through. How can that be???

    Hello - I wonder what can have happened. I got a mail from the itunes store with the info of a refund for an App that I cannot have purchased. Then I asked for help via the support and had to fill out a form with data. My account name (first name and last name) was already there and when I finally wanted to submit my request for support it said that my first name ( there are 2 for that) was not correct. I had the idea of cancelling the 2nd 'first name = only M. and then the request was accepted.
    What might be the reason for all that turmoil? I mean the refund for s.th. that I did not buy and then the non acceptance of my first name's data?
    I appreciate a comment, aimeeh

    Make an appointment at the genius bar.
    If you went without an appointment, then it would make sense that you could be turned away.

  • How to do create data type for coulmn name as QS$FGD .

    hi ,
    In my database i have a column as QS$FGD.
    How do i map it in XI , since $ is not accepted when u create a data type.
    One way is to give alias at the databse level for the column . is there any other way to slove it .
    Thanks
    amit

    Hi Amit,
            Were you able to solve your issue? I'm facing the similar issue now. My DB table contains field names with '.' i.e. say xyz.abc. How to solve this??
    I feel SP could be an alternative??
    Thanks,
    Hussain.

  • Report - Want to know the maximum length of a character Data Type.

    Hello,
           I have to print some details which is having more than 500 characters. Is it possible to create a variable or workarea with more than 256 characters? Please help me. Its very urgent.
    My actual requirement is to pass this workarea to smartform and print. So the data should be in one work area.
    Regards,
    LIJO

    Hi,
    U can declare the variable of required length for eg.1000 characters like this
    DATA: w_data(1000) TYPE c.
    If u r not sure of how much length u will be getting then better declare the variable with data type string .
    DATA: w_data TYPE string.
    Hope this clarified ur doubt.
    thanks,
    Vinod.

  • Space removed from character data type when move to internal table issue...

    Hi Friends,
                        I converted material code and other details into internal table which have corresponding data types.But in internal table,I can see material code as left justified ,but after that space was removed.For example if material code is 'ABC' then rest of the space(material char(18)) are removed.But I need remaining spaces.I tried to concatenate material  code with spaces (caoncatenate matnr `        ` int etc .. )at right side and moved to another internal table.Its working.But the problem is material codes have different values like one material 'ABC' and another like '123893-h' etc.So I need to calculate the space(out of char 18) dynamiclly and need to put space based on material code value.
    << Moderator message - Everyone's problem is important >>
    .Thank you all..
    Regards,
    Kumaran..
    Edited by: Rob Burbank on Oct 26, 2010 11:18 AM

    Hi Ramkumaran,
    You have not told the purpose of having these spaces.
    is it for transfering to a file?
    If that is the case, use a table with fixed lenght lines instead of many fields.
    i.e. try something like this
    DATA : i_tab type standard table of BUSDATA,
    wa_tab type BUSDATA.
    wa_tab+0(10) = material number.
    wa_tab+10(10) = material code.
    wa_tab+20(4) = company code...
    append wa_tab to i_tab.
    Thanks
    Vimal

  • Convert from String data type to Character data type

    Hi...,
    I'm a beginner. I try to make a program. But I don't know how to convert from string to data type. I try to make a calculator with GUI window. And when somebody put "+" to one of the window, I just want to convert it to Character instead of String.
    Sorry of my bad english..
    Please help me....
    Thanks

    String s = "a+b";
    char theplus = s.charAt(1);

  • Date Types not visible in CRM Service Request

    Dear Friends,
    I am implementing Service Requests in CRM 7.0 in our project
    I have configured the Date Types and assigned them to the Date profile
    The Date profile i have assigned it to the Transaction Type
    But when creating the new Service Request Transaction Type the dates are not appearing
    Can you help me by directing me to any missing config
    Regards,
    Raj

    Hi,
    check if you have set the screen assignments in the date profile. When you assign the date type, in the left navigation area, one level below, you have to set the visibility of the date type.
    Regards, Toine

  • Enhanced Data Type not visible in SPROXY

    Hello experts,
    I've enhanced my personal data type with some extra fields...
    I activated this and the change can be seen in the Message Type and the Service Interface.
    Next, I go to my ECC6.0 backend system and take transaction SPROXY. There I need to regenerate my proxy.
    After I did that, I expected to see my added fields in my input structure as an append structure, but that's not the case.
    What's wrong? Please advice.
    Thanks a lot!
    Dimitri

    Hi Dimitri,
       There should not any problem while generating proxyies again please chek two things in your case
    1.Wether the Activation is done prperly or not.
    2. Conncetions from ESR to PI are proper ot not ( rfc connection LCRSAPRFC between PI and R/3).
      Please chek the fillowing link which has the information about the issue in visibiility of content in ESR and the necessary configuration steps to be followed to enable the updated PI content in ESR as response to Question 2. in the responses.
    Thread:
    Re: Simple questions about proxy
    Configutaion guide for checking Proxy connections
    /people/vijaya.kumari2/blog/2006/01/26/how-do-you-activate-abap-proxies
    Thanks,
    Ram.

  • VISA data types not compatible with ODBC SQL_C_ datatypes

    This is strange: I have a CVI app which reads data from Access 2.0 into VISA
    datatype structures throught ODBC 3.51 and so far it worked properly but
    when I upgrated the ODBC drivers to 4.0 (the application remins the same
    exe) then all cases where I use ViInt16 recieves zeros instead the correct
    data.

    Hi vaibhav
    Thanks for help. Actually my requirement is that I have one database on sql server 2005 version. I am planning to migrate it to sql server 2012 version. I want to publish a list of all objects across all databases which cannot be replicated to sql server
    2012.How can I do this. Are there any data types which were in sql 2005 version but are depreciated in sql server 2012
    Regards
    Rahul
    yes there are
    but why not look at here for breaking changes
    http://msdn.microsoft.com/en-us/library/ms143179(v=sql.110).aspx
    The deprecated features would still work though new development using them is discouraged
    Please Mark This As Answer if it solved your issue
    Please Vote This As Helpful if it helps to solve your issue
    Visakh
    My Wiki User Page
    My MSDN Page
    My Personal Blog
    My Facebook Page

  • HT5858 will not accept name email or passwordl

    Trying to set up an email account with google and it will not accept my name email or password

    Check that in Settings > Safari > Block Cookies you do not have this set to Always.

  • Data types not compatible with Sql Server 2012

    HI All,
    I need to know what are data types which were present in sql server 2005 but are not in sql server 2012.
    Regards
    Rahul

    Hi vaibhav
    Thanks for help. Actually my requirement is that I have one database on sql server 2005 version. I am planning to migrate it to sql server 2012 version. I want to publish a list of all objects across all databases which cannot be replicated to sql server
    2012.How can I do this. Are there any data types which were in sql 2005 version but are depreciated in sql server 2012
    Regards
    Rahul
    yes there are
    but why not look at here for breaking changes
    http://msdn.microsoft.com/en-us/library/ms143179(v=sql.110).aspx
    The deprecated features would still work though new development using them is discouraged
    Please Mark This As Answer if it solved your issue
    Please Vote This As Helpful if it helps to solve your issue
    Visakh
    My Wiki User Page
    My MSDN Page
    My Personal Blog
    My Facebook Page

Maybe you are looking for