Charge Expenses to Asset

Dear group Members,
How can i charge Expenses amount to asset
Pleas help me with the transaction code, Document type & posting key
Issue is as
vendor invoice is posted as asset, how can i transfer to asset ( new asset)
Regards
Shamulheq
Edited by: shamulheq on Jul 14, 2009 8:54 PM

Hi,
Can you try using transaction ABZON for your requirement?  In place of offsetting account specify your expense GL.
Before posting this check the document in simulation and then post the document.
Hope this helps you.
Regards
Kiran Yelamarthy

Similar Messages

  • Order Import failing with error "The specified subinventory is invalid to use, the profile option INV: Allow Expense to Asset Transfer is set to No. Change the profile option to Yes or choose a valid subinventory."

    Hi All,
    I am getting this error while importing an internal sales order.
    “The specified subinventory is invalid to use, the profile option INV: Allow Expense to Asset Transfer is set to No. Change the profile option to Yes or choose a valid subinventory.”
    I have tried to set mentioned profile as ‘Yes’. But still getting same error.
    Also, provided subinventory is present and active in given inventory organization.
    Please share if anybody encountered this before and have a solution.

    Hi 2878342
    Please refer the following metalink note, it should resolve your problem.
    Order Import Interface.Error Message Specified Subinventory Is Invalid To Use (Doc ID 406411.1)

  • Direct Expensing out Asset with out capitalizing

    Hello Asset Gurus,
    Is there any way to directly expense out asset as it is received through Purchase order? 
    The requirement is to immediately expense out some low value components.
    I know its possible to receive it as a LVA and depreciate it in the same month fully, but is there any other way of expensing out with out receiving to balance sheet?
    If Yes, how should be the settings for GL accounts in account determination?
    thanks
    sap freak

    Hi,
    the issue you describe rather intents that you have no asset as accounting object. So why do you account on assets if you want to expense it directly without any impact on AA subledger?
    You mentioned the immediate depreciation already, that would be one way. By the way, talking about accounts: if you do not use the LVA functionality, how should the system determine an expense account to be posted?
    Another option would be to use limited transaction types, which would expense it directly with the "capitalization differences functionality" to one (expense) account maintained in the IMG for the depreciation areas which do not get APC amounts.
    Regards,
    Markus

  • AP Track Expense as Asset

    I cannot track expense that is received from Oracle Purchasing as assets. Does anybody know about this?

    when an expense is being tracked as an Asset, there should be a little box that has a heading called "Track As Asset". You will find it in the Distribution screen of the invoice . When this box is checked you will be able to track as an Asset and be able to be inventoried

  • Reg. Expenses against Asset

    Dear Experts
    We are purchasing spare parts to asset and do other expenses against that. but those and all (Asset) purchased before SAP implementation. whereas how to bring into sap system. Pls help me.
    Thanks
    Rajakumar.K
    Edited by: Raja Kumar on Aug 18, 2009 7:15 AM

    Hi,
    While implementing SAP, the Asset Master Records have been updated and the GL accounts for Fixed Assets would
    have been updated with the value on a cut of date taking into consideration the value of each asset including the
    spare parts added to it.
    There two things here :
    Whether Spare parts are purchased and consumed as expenses
    Whether Spare parts are adding value to the Asset.
    If they are only treated as expenses the relative expense account in P & L would have been updated while uploading GLs
    during implementation.
    If they are adding value and the asset is still incomplete and not put to use, it would have been taken as Asset under
    construction and once asset is ready for use it will be capitalized.
    If the Asset is complete and in use and still some spare parts are added, it can be done through creating an asset master
    sub record for the relative Asset class let us say Plant & Machinery and Asset Main say  Equipment andAsset Sub record as
    springs or bushes. 
    Please revert back if you need further clarification.
    Sadashivan

  • Charge expenses to employees

    SAP GURUS, here is the scenario...The company charged a certain employee deductible to his/her salary. Example. Broken piece of equipment, the company paid the supplier on behalf of his employee to accommmodate the purchase for replacement of the broken piece of equipment. We are NOT currently using the HR module. I know we need to have a GL account which will turn as reconciliation account as AR-Charge to Employees, in which I need to define the list of employees that will be linked to the reconciliation account. Please help how to enter this into SAP and also what are the necessary configurations applicable to set up the said scenario. Any inputs will be highly appreciated. Hope you will help us....THanks

    Hi
    When we do not have HR module, tracking employee details in FI is slightly odd.
    If we create employees as vendors, we would debit salaries and credit vendor.
    All payments & charges can also be debited.
    But the problem is at the year end. The balance in the recon account would be shown as either as asset or a liability.
    So to avoid all these, I normally recommend to have employees as Internal orders.
    All transactions can be posted to these IOs
    Reg
    Suresh

  • Distributing Expenses on Assets

    Hi Gurus,
    I have a questions. I need to distribute expenses to all assets  on FA book equally. Normally, ı enter an expense  invoice from AP then enter lines(I can use distribution set for this,but ıf ı do that way,ı must update the distribution set when ı add a new asset) for each asset on FA then transfer it to AP then add them to assets manually on Mass Addition window. But it is taking so much time, I am trying to find an easier way to do this.
    Our team can develop a program for this.But ı want to solve it with EBS functionality.
    Our EBS version is 11.5.9
    Any ideas?
    Thank you for your help
    Serkan Erginbilgiç

    Hi Serkan,
    Which process is time consuming or difficult for you ...?
    If it is due to Mass addition process in Asset Module,
    you can make use of the Web ADI functionality for creating assets directly in Oracle Assets Module, instead of going through Oracle payables ...All required details are entered in an ADI template (Excel Sheet) and uploaded to Oracle Assets...
    If it is due to Data entry at Oracle Payables Module,
    you should see whether invoices can be created by matching it to PO/Receipt for Assets and Expenses ...that way data entry at the Invoice creation screen is avoided, the accounts are auto populated from Purchase Order ...
    Regards,
    Ivruksha

  • Iphone 6 wont turn on or charge (expensive paperweight mode)

    My Iphone 6 t-mobile will not turn on i was in a face time audio call then the call dropped when i went to look it was turned off so i figured it was dead but then i put it on the charger and nothing appeared, plugged it into itunes wasnt recognized now im here

    As Lyssa mentioned it could very well be a hardware issue. Maybe there's something in here that will help:
    iOS: Not responding or does not turn on - Apple Support

  • Expensed Asset in Oracle Assets.

    Hi,
    We wanted to get more clarification around Expensed assets. If we have some assets,which are of non depreciable nature,say for example Land, then such assets should be treated as expensed assets by attaching them to the expense asset category? or for each of these assets the depreciation check box should be unchecked at the asset level? What should be the ideal approach in such a case?
    Kindly provide inputs regarding the same.
    Thanks

    Hi,
    expensed assets are to be used only for assets which are of insignificant value as decided by management. If a normal asset is treated as expensed asset, it would not be charged to an asset account it would be charged to an expense account directly, and there would be no depreciation computed in the asset module, no jounal entry would be created in asset module, the expensed asset would appear in Asset module for tracking purposes alone ...
    For example, say your company has been providing Blackberry device to all its employees, ideally this can be treated as an asset, however when compared to the total value of your assets, you may feel it is less significant to be treated as assets, this could very well be treated as an expenditure... hence this would be taken care in the oracle payables stage itself ... however for the sake of tracking alone you want this to appear in asset module...
    for which case you would have a dedicated asset category defined without depreciation checkbox enabled and using mass addition process create expensed assets .... Expensed assets has zero financials impact ...
    It is not right to treat LAND or other non depreciaable assets as expensed assets reason being, oracle assets would not generate any accounting entries for expensed assets, which means cost related entries for LAND would not be created by system .... Hence you can either create a zero rate depreciation method and map it against the LAND asset category which is a simple step, hence all assets under LAND category would inherit that depreciation method
    .... else you can uncheck depreciation checkbox at asset level i.e. for each and every asset under the LAND category.
    Regards,
    Ivruksha

  • Vat charge when we sale asset through asset accounting f-92

    what configuration settings we need to be done to charge vat on asset sale through asset accounting f-92.

    Hi Abhi
    What I have seen clients doing is this:
    They post F-92 to remove the assets from the assets register...Either with or without tax
    Then they post VF01 with 100 discount so that VF01 posts only the Tax amount incase its not posted in F-92
    Later on you can print the invoice from SD and pass it on to the customer
    br, Ajay M

  • Does anyone use Framwork POs for WBS and Asset management.

    We have had issues before with trying to use Framework POs for Assets.  I wanted to know, does anyone out there use the Framework PO for the creation of Assets with charges going to WBS elements?  Do you track service charges as well as material charges that are purchsed for Assets?

    For PO, WBS, Asset frame work below is the sample
    Create WBS which manage AUC
    Example you will create a clinic,
    Create Project - [Project Clinic]
    Create WBS under the Project Clinic - [Clinic Expense]
    Create AUC under WBS Clinic Expense - [Clinic under Construction]
    Let say you purchase Paint for the clinic - create a PO and use account assignment WBS [Clinic Expense] (e.g. 1000 USD)
    Let say you purchase Wood for the clinic - create a PO and use account assignment WBS [Clinic Expense] (e.g. 2000 USD)
    During month end you can settle the amount to AUC (tcocde CJ88 - Settlement type - Automatic)
    All charges to WBS will go to AUC
    Once construction of clinic is finished and is ready to use, you need to settle all the amount from WBS to AUC (through settlement)
    Then create Fixed Asset [Clinic Building]
    Then settele the AUC [Clinic under Construction] charges to Fixed Asset [Clinic Building] through CJ88 settlement type - Final settlement
    Thanks!
    Jhero

  • Asset MIRO Freight changes changes - Acquitision value negarive in area 01

    Dear Experts,
    Please guide me,  I have one CWIP asset for this i have done PO and GR and freight chages  4500,  for the asset MRO also done except freight charges.  We had capitalised for this CWIP asset (from CWIP to Original asset transfer).   this transcaction was in laster fiscal year (in DEC 2009) Asset current balance is "0".  now we are doing freight miro  that time we are getting error message i.e.,  "Acquisition value negative in area 01".
    While doig PO i had entered freight charges 4500,  GR also  happen with Rs 4500.   My actual freight is 4250/- only.
    In miro i have changed freight  charges to 4250 from 4500/- .  I have to post freight changes with 4250/- only.
    if i change 4500/- to 4250 system throughing error messag.  Please suggest me any possiblities.
    Regards
    Chandu

    Hi Chandu,
    During frieght exp MIRO entry, do not change the GRN values manually.
    Means, when you enter the PO number in MIRO, then the system automatically picks 4500. Becoz GRN was done for that much amount. So do not change the value to 4250 from 4500 in the item level.
    Change the vendor invoice value as 4250 in the header level. So you will have 750 balance on top right corner as RED.
    So charge this 750 to the frieght charges GL account manually in GL account tab.
    Enter the frieght charges GL and choose CREDIT and enter amount as 750 and enter the CO account assignments as per your requirement.
    Then you will be able to post the MIRO entry. By doing this, your frieght charges expense GL account balance will be reduced by an amount of 750 by this MIRO entry.
    This will resolve your issue.
    Thanks,
    Srinu

  • Treatment to reverse asset that already run depreciation

    Hai everyone,
    Our user has found that, one asset is suppose not charge / classified to asset but created as asset. the asset already run depreciation. what the best treatment to tacle this problem, can we use transaction code: ab08 or the user must doing the entry thru jurnal.. Perhaps someone outside there have the same experiences like me and what the best solution to give the user

    Hi,
    Post a transaction thru ABSO, with transaction type 105 using asset vlaue date as same as your asset acq date.
    Then total 100% will be reversed from the asset acq APc account and the posted depreciation will be adjusted in the next dep posting run. (posted dep will be credited to expense account for that asset in next run)
    Thanks,
    Srinu

  • Error in Asset Value carry forward to next year

    As a regular periodic process of Month/Year closing activities in SAP, Asset Year 2015 was opened and then closes the year 2014 and carried forward the Asset values to the year 2015. But unfortunately some of the Asset value had not been transferred to the year 2015. As a result, Depreciation had not been charged for those Asset for the year 2015. Need to transfer the Asset value to the current year immediately. Can any one help me regarding the problem ? The APC Start value is showing in the year 2014 but its not showing in 2015.
    The Closing value of Current APC of year 2014 does not match with the Opening value of the APC Start, so what should be the possible reasons for that ?

    Hi Erika,
    I did that on last January 2015. First i use the T-code: AJRW for the Fiscal Year Change and then T-code: AJAB - for Year end-closing Asset Accounting as i did that for last 4 years. Though there was as error message indicating error in depreciation calculation, our consultant assured me that that will not create any problem. The Error was like below:
    600981       0    Secretariat Table                              2014 Error in dep. calculation

  • Bank Charge for Outgoing payment. Any workaround

    Hi,
    Has anyone develop solution for the Bank Charges in Outgoing payment ?
    Under Incoming Payment, there is a bank charge field which is will post together with the amount received from customer.
    We would like to have the same function in Outgoing Payment and automatically post in Journals. How can SDK help ?

    Hi ,
    Try this work around for bank charges involved while making payments.
    Example
    Amount due to supplier-10000
    Bank charges - 100
    Total payment - 10100
    1)Go to outgoing payment screen/type the vendor and select the invoice of 10000.
    2)Go to payment means and against bank column enter 10100
    3)In payment means in row two type bank charges for 100
    The system will throw an error saying bank charges is not cash account.still u can post the entry.
    The accounting entry will be
    Supplier a/c Debit - 10000
    To bank a/c Credit -10100
    To Bank charges a/c credit - (100)
    (instead of debiting bank charge expenses it is crediting the charges in negative figure / impact is same)

Maybe you are looking for