Charm - customizing landscape in SolMan
Hello,
I want to start working with ChaRM at at customer. I would like to setup a "satellite system" that simulates a real DEV, QA, PRD. We don't want to touch the current productive route, nor moving things into production while we test Solman.
I suggesting a new logical system (ERP) pointed to three different clients. However we are running out of server boxex. One of the possibility is to have any ERP Sandbox available and then create these three additional clients (500, 600, 700). Then create a transport route for these three clients.
In this way we are going to have teh possibility of testing charm tickets for client-dependent customizing before moving to the real productive route.
Do you see any other alternative for this type of simulation and training? Do you have any example of a landscape for Solution Manager configuration and testing??.
I appreciate your help
Esteban Hartzstein
Hello Esteban,
I have been testing ChaRM this way for many customer for 2 years and it works perfectly... If you have only one system available I don't see any other way to do it.
Regards,
Stéphane.
Similar Messages
-
Is it Possible to Create Custom Report in SOLMAN
Hi Experts,
I am new to SOLMAN. I have one question. Is it Possible to create our own custom Reports in SOLMAN. If possible
tell me the variuos types of reports and how we can create.Hi
SAP Solution Manager can be used for entire ALM so you need to clearly specify which area and what report you are talking about
http://www.sdn.sap.com/irj/sdn/alm-getting-started
General transaction code for reporting is
SOLAR_EVAL
it helps you to build the entire project report phase wise or for service desk or for charms or test management etc
check if that you are looking for.
regards
Prakhar -
Hello experts,
I want to create custom extractors for solman service desk, but i dont khown where the information is stored.
¿someone have the ERD of solman or the tables list where de information is save?.
RegardsHi,
someone havetheERDofsolmanor the tableslist where de information is save?.
check the table E2E_ACTIVE_WLI
Thanks
Jansi -
SolMan ChaRM - System landscape not ready yet
Hi all,
We are configuring ChaRM for an implementation use, therefore all the systems are not set up yet.
Is it possible in SolMan to define logical component without "real" systems ?
We saw that in STMS it was possible to create virtual systems, but how do we link these virtual systems to SolMan ChaRM ?
Is it possible to define a virtual system landscape and to build and configure ChaRM scenario with this ?
Thanks a lot for all your help,
Regards.Yes, it is possible to define a development system and virtual systems (Q- and P-System).
Via transaction SMSY you can describe the planned Q- and P-System at first as 'virtual'.
Create transport routes with transport buffers as you would do for existing systems.
Define the buffers as they should be named in future.
For experimental purposes we connected our IDES-System to our development SolMan system.
In this environment we could map such a ChaRM-configuration.
In the meantime we practiced it in our production SolMan system, too.
Best regards
Horst -
CHARM -User Ids in Solman & It Satellite System ECC R/3-Same or different
Hi,
I have configured CHARM with ECC R/3 3 system landscape.
Is it necessary to have same user id in Solman as well as in in ECC R/3 all 3 systems( Dev, QAS & Prod).
Regards
PKhi
you shoudl have the below roles for the developer in the active client solman to set the status as in development.
Developer
SAP_CM_DEVELOPER_COMP(composite role)
SAP_CM_SMAN_DEVELOPER
SAP_SOCM_DEVELOPER
SAP_SOCM_REQUESTER
more reference kindly go thorugh the security guide
Please take a look:
Security Guide SAP Solution Manager 7.0 EHP 1
6.4.17 End-User Roles for Change Request Management . . . . . . . . . . 101
https://websmp106.sap-ag.de/sapidb/011000358700000370562009E/SM_SECURITY_SPS23.pdf|https://websmp106.sap-ag.de/sapidb/011000358700000370562009E/SM_SECURITY_SPS23.pdf]
and the SAP note
Note 881553 - Roles for Change Request Management (SAP Solution Man 7.0)
jansi -
(CHaRM) multiple landscapes in one maintenance project
Dear solman experts,
I know that it is possible to have one global maintenance project supporting multiple landscapes with the scenario CHaRM, instead of one maintenance project for one landscape. My question is what are the specific configurations to keep in mind when performing the configuration? And what are the consequences e.g. Can I still use the Change Document types urgent and normal correction or is it limited to only the normal correction due to complexity?
I hope someone can help me this.
Thanks in advance.
Regards,
RickyHi
Yes it is possible................ with maintenance project you get normal, admin and urgent correction types
only with implementation projects you get normal & admin only and no urgent corrections
Secondly you have to create logical component for each system landscape and add all of them to your single project
e.g
SAP ECC landscape LC1 Dev 100 QA 200 PRD 300
SAP BI landscape Lc2 dev 100 qa 200 prd 300
etc
Note one logical component can store only one system landscape information not all systems
so add all of them in one project and activate charm.
now whenever the ticket is created ....developer can choose the system in which they want to create a TR ......and based upon LC it knows which is right Quality and prd.
Morver never forget .....Solman domain controller is master and it uses the same TMS setup which you for satellite system without charm.
hope its clear now
regards
prakhar -
CHARM: Customizing in Prod
hey,
we have to customize some things in our PROD-Sys.
But how can i get him (SolMan) to create a transport order just there in our PROD?
And not in our DEV???
Hope someone can help...
Kind Regards
DirkHello Esteban,
I have been testing ChaRM this way for many customer for 2 years and it works perfectly... If you have only one system available I don't see any other way to do it.
Regards,
Stéphane. -
ChaRM migration to New Solman System
Hi,
We are planning to Migrate old Solman system ChaRM to new Solman ChaRM.
Now how can I migrate RFCs & CDs to new Solman system ChaRM.
Regards
P KHi PK
There is no tool for moving the SLFN documents from one solman to the other. The only option to keep the already created tickets is to upgrade the the existing solman system to release 7.1.
In SOlman 7.1 SM* transaction types are comming so during the upgrade we don´t make any changes to the old transaction types like SLFN, so the upgrade should not change your current configuration in solman 7.0 for incident management.
You will not have any impact on Service Desk when using the old transaction type SLFN.
So there can be only one recommendation for your situation:
Perform an UPGRADE and please don't go for a fresh installation with data migration afterwards.
There is no easy transfer of CRM document (as incidents, change requests, issues, top issues, ...) available.
Advantages of the upgrade:
- standard procedure
- configuration and data is available after the upgrade
The solman 7.1 is coming with new transaction types that you need to customizing and it is not touching the old transaction types existing in solman 7.0.
Please, take a look at this:
http://scn.sap.com/docs/DOC-30133
Also check below note which answers few FAQ's:
1567003: FAQ: ST710 Incident Management Frequently Asked
Check below Wiki as well:
http://wiki.sdn.sap.com/wiki/display/SAPITSM/Configuration+and+Administration+of+ITSM
(all in one line)
And select Configuration Guide - Application Incident Management
Also check the External Service Desk Functionality.
Please follow the path to the nodes listed below.
SAP Solution Manager Implementation Guide
SAP Solution Manager
Capabilities (Optional)
IT Service Management
External Integration
Service Desk
External Service Desk
Thanks
Vikram -
Custom landscape page size - - content squashed portrait
I'm trying to create a PDF for an MS PowerPoint file with a very large page size, 46" x 36" (landscape). I'm using Acrobat 7.0 on Windows XP.
In keeping with guidelines at www.adobeforums.com/webx/.3bbad46c/0 I selected the printer properties and created a new form with the desired values, entering the dimensions as if it were portrait, 46" height and 36" width. I also created a custom Adobe page size using the same dimensions. Under "Layout" I chose "landscape."
The output file has the correct dimensions with a landscape orientation. However, the content is squashed onto the left side of the page with a very wide left margin, as if Acrobat were trying to fit the content into portrait-oriented dimensions. Words are overwritten on top of one another and it looks horrible.
Just to check, I went back into the form preferences and the page size and individually changed first one and then the other to have the correct landscape height and width. Neither approach worked.
Any thoughts?Oops, sorry, looks like I'm in the wrong forum.
-
PDF custom landscape page size - - content squashed portrait
I'm trying to create a PDF for an MS PowerPoint file with a very large page size, 46" x 36" (landscape). I'm using Acrobat 7.0 on Windows XP.
In keeping with guidelines at www.adobeforums.com/webx/.3bbad46c/0 I selected the printer properties and created a new form with the desired values, entering the dimensions as if it were portrait, 46" height and 36" width. I also created a custom Adobe page size using the same dimensions. Under "Layout" I chose "landscape."
The output file has the correct dimensions with a landscape orientation. However, the content is squashed onto the left side of the page with a very wide left margin, as if Acrobat were trying to fit the content into portrait-oriented dimensions. Words are overwritten on top of one another and it looks horrible.
Just to check, I went back into the form preferences and the page size and individually changed first one and then the other to have the correct landscape height and width. Neither approach worked.
Any thoughts?Oops, sorry, looks like I'm in the wrong forum.
-
ChaRM customizing - status hangs
Hi,
in customizing Service Desk/ChaRM we are using Incident Tickets (type ZLPI) which are linked with Change Requests (type ZDCI). The status profile used for the Incident Tickets is the following:
10 OPEN Open 10 25 1 1 ZLPI_10
20 DESC Problem Described 20 30 1 1 ZLPI_20 INPR
25 REJE Rejected 25 25 1 1 ZLPI_25 FINI
30 PACC Problem Accepted 20 40 1 1 ZLPI_30 INPR
40 PESS In Process by ECS 20 50 1 1 ZLPI_40 INPR
50 SPRO Solution Proposed 50 71 1 1 ZLPI_50 INPR
60 ONHO On Hold 50 71 1 1 ZLPI_60 INPR
66 SAPP Solution Approved 66 80 1 1 ZLPI_65 INPR
71 SREJ Solution Rejected 25 71 1 1 ZLPI_70 INPR
80 SIMP Solution Implemented 80 90 1 1 ZLPI_80 INPR
90 CLOS Closed 90 90 1 1 ZLPI_90 FINI
99 STS Sent to SAP 99 99 1 1 ZLPI_99 INPR
A Change Request can be withdrawn which causes the status of the linked Incident to be set to "Problem Accepted" (via the SET_PREDOC action which works fine). The only problem we encounter now is, once the status is set to "Problem Accepted", no further statuses can be set.
Additional information:
- the system status remains "In Process" when the Incident is set to "Problem Accepted"
- the status still can be changed with the CRM_SOCM_SERVICE_REPORT (sequence of status profile is maintained)
- Linked Change Requests can only be created when the incident is in status "Solution Approved" meaning every incident with a withdrawn change request already reached status Solution Approved (stat.nbr 66) before
Has anyone encountered a similar problem with status profiles which 'hang' at a certain status ?
Thanks in advance,
TomCorrect,
the following statuses - which should be shown - are not shown:
- Problem Described
- Rejected
- In Process by ECS
Regards,
Tom -
Charm customizing listing tool
Hello,
In service desk there is a program AI_SDK_CUSTOMIZING_LISTING that one can use to list all the customizing in service desk. Is there any such tool for listing all the customizing in Charm?nothing found
-
ChaRM: Customizing of Change Request (IBase/Component)
Hi!
By creation of Change Request the value "IBase / Component" should be filled.
The default values here are: "0" and "0".
Has some one already customizng experience here?
I would like to change the value to e.g. "1" and "314" (my productive IBase).
Thank you very much!
regards
H. ThomassonHi Holger,
I am not sure about CHARM.
But since CHARM is also based on Service Desk functionality, may be the transaction IB52 can help you.
Executing IB52 transaction, will take u to a screen from where u can select your Installed Base using value help. In most of the cases, there will be only one option.
Just select that iBase, in the following screen, you will be able to see all the attributes of your installed base in the Text tab of the lower right part of the screen which is editable. Here you can make the required changes as you wish.
Reward for helpful answers.
best regds,
Alagammai.
Edited by: Alagammai Arunachalam on Sep 25, 2008 12:28 PM -
ChaRM: Customizing of SAP smart formular CRM_REMINDER_MAIL_01
Hi!
I would like to customize the smart formular CRM_REMINDER_MAIL_01 in order to notify change request manager that the urgent correction status has been changed from "Created" to "In Development".
The formular has originally the following view and will be generated as PDF:
Title: Reminder Mail
Text:
One of your activities is overdue.
Number: &orderadm_h-object_id&
Description: &orderadm_h-description&
Please do not respond to this mail, as it was automatically generated.
Best Wishes - System Administration
How can I customize the formular as follows?
Title: Urgent correction &orderadm_h-object_id&
Text:
The urgent correction numer &orderadm_h-object_id&
has changed their status from &???status_A& to
status &???status_B&.
Other question:
What are the settings in tcode SCON to send the mails with formular name CRM_REMINDER_MAIL_01 as txt not as PDF?
Thank you very much!
regardsHello,
please look here:
Subject of the Email (CHARM/ServiceDesk)
It should helps.
Kind regards
Marc -
ChaRM: Customer fields Tab & Documentation
Hi
In the Change request screen there is a tab for customer fields under transaction data. In this Tab there is a "Documents" button that allows me to attach project documentation to the CR.
However if I try to do that when the CR has been approved it just says "Function cannot be performed".
How can I change this behaviour to allow me to attach documentation after the CR is approved?Thank you
This table is configured in the IMG area
SAP Solution Manager
Scenario Specific settings
Change request management
extended configuration
assignment of documents
configure action menu
In this area I took the 2 entries for SDCR user status E0004 and copied them
Set the activities to Change Document & saved these
Then copied the original 2 entries again
Set the activies to Assign document
That gave me the activitie I require.
Many thanks for your help
Maybe you are looking for
-
No component usage created in enhanced web dynpro component
Hi experts, I am facing the following problem: I'd like to enhance a web dynpro component in order to add a popup window. The popup is triggered by the process_event method. So far everything works just fine. But the popup needs to know some context
-
What kind of cd/dvd cleaner can I use for my Macbook Pro optical drive
Can I buy any kind of cd/dvd cleaner at like best buy, or is there a specialized cleaner made only for Mac drives? I (like most people) have been having problems with my drive and thought cleaning it might solve the issue. Thanks.
-
Post journal entry automatically when a certain account is posted
Dear all, Thanks for your attention. I would like to post an Journal entry automatically at the same time (or just after) a certain account is posted. Certain account means an account ID for Payment Difference of Payment for Invoice. I would like to
-
Hi gurus, I need some help: Is it possible, via user exit or something similar, to add the field EKKO-EBELN into table EQUP? It should be useful just right to LIFNR column. THe idea is to have the doc. number into quota arrangement. Thanks, G
-
Dblink poor performance with varchar(4000) after upgrade 11g
Hi Since a long time we connected from a 10g database via dblink to another 10g database to copy a simple table with four columns. Tablesize at about 500MB column1 (varchar(100)) column2/3/4 (varchar(4000)). After the upgrade of the source database t