Chase Marriott letter* Update

Ii apped for a Chase Marriott card a few weeks ago and got the 7-10 day message and assumed I was denied.  I received a letter today from the Chase fraud department asking me to call and verify some information.  I called and they wanted to verify my SSN and Chase checking account balance.  I was put on hold and then was advised they will need more info from me and I will get another letter on how to proceed in 5-7 days.  They said I might have to send in a copy of my DL or a utility bill.  I verified that the letter was from Chase but it just sounds odd to me.  Has anyone had this happen on this CC?  My score aren't that fantastic since I am rebuilding- 680.s across the board but I bank with Chase and have 2000.00 in checking and 6000.00 in savings.  I also have a Chase Freedom for 1200.00 and Slate for 1200.00 plus a few other bank cards  not with Chase.  My utilization is at 5% and I pay in full on all cards each month but one.  I make 80000 per year and run all my expenses through my Chase cards.  Does this sound like I will be approved?.  I am glad I wasn't denied outright and I'm hoping that the need to verify info is a good thing and not a big let down.   UPDATE.  I called Chase back today asking what they needed me to fax in rather than wait for the letter.  They wanted a copy of my DL which I faxed right away.  How long shoul I wait to call back?. The rep said 14 days but I'm no sure that is accurate.  

Lilas wrote:
Ii apped for a Chase Marriott card a few weeks ago and got the 7-10 day message and assumed I was denied.  I received a letter today from the Chase fraud department asking me to call and verify some information.  I called and they wanted to verify my SSN and Chase checking account balance.  I was put on hold and then was advised they will need more info from me and I will get another letter on how to proceed in 5-7 days.  They said I might have to send in a copy of my DL or a utility bill.  I verified that the letter was from Chase but it just sounds odd to me.  Has anyone had this happen on this CC?  My score aren't that fantastic since I am rebuilding- 680.s across the board but I bank with Chase and have 2000.00 in checking and 6000.00 in savings.  I also have a Chase Freedom for 1200.00 and Slate for 1200.00 plus a few other bank cards  not with Chase.  My utilization is at 5% and I pay in full on all cards each month but one.  I make 80000 per year and run all my expenses through my Chase cards.  Does this sound like I will be approved?.  I am glad I wasn't denied outright and I'm hoping that the need to verify info is a good thing and not a big let down.  Definitely approved.  The exact same thing happened with me when I applied for the Marriott card.  I faxed a copy of my DL, called back in a week or so.  Unfortunately the first fax of my DL I didn't convert to B&W first and they said they couldn't read anything on my license.  I scanned my DL again, converted it to B&W, and faxed it off again.  Waited another week called, spoke with someone from verification who double checked all my info, put me on hold for what seemed liked an eternity and then told me I was approved for $5000. My scores were WAY lower than yours, I'm thinking in the 620 range.  I was approved for a Freedom for $3000 a month or two earlier.  If I had to guess your limit should be pretty decent with scores in the 680s. Congrats in advance (that's what everyone told me when I posted my thread, so I figure it's appropriate)  Oz

Similar Messages

  • App Store has not up date for over 24 hours now, it was updating as usual early AM Nov. 6th, I have changed nothing, App Store will not let update or purchase happen now. Anyone know why? Thank you.

    App Store has not updated for over 24 hours now, it was updating as usual early AM Nov. 6th, I have changed nothing, App Store will not let update or purchase happen now. Anyone know why? Thank you.

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Select
    /var/log ▹ install.log
    from the hierarchical list on the left. If you don't see that list, select
    View ▹ Show Log List
    from the menu bar. Then select the messages from the last installation or update attempt, starting from the time when you initiated it. If you're not sure when that was, start over and note the time. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
    If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
    When posting a log extract, be selective. Don't post more than is requested.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting.

  • I used my boyfriends Apple ID cause mine wasn't letting update anything now my Apple ID is now saying there's a billing problem i put all my stairs in but still won't let me update anything an it's making my phone really slow what so I do?

    I used my boyfriends Apple ID cause mine wasn't letting update anything now my Apple ID is now saying there's a billing problem i put all my stairs in but still won't let me update anything an it's making my phone really slow what so I do?

    Hmm, im pretty sure your not alowed to use a debit card as a method of payment , your options are credit card ( visa, mastercard etc ) but to clarify is it letting you download free stuff ?

  • Chase GW letter? tips or suggestions?

    Hey everyone. I just love this forum -- so happy with the help I've gotten here. I've got several irons in the credit repair fire and one of them is a series of late payments on two closed Chase CC accounts. I was in a repayment plan, had set up automatic payments and had no idea that I was 60-90 days late all along. The agents I worked with to set up the automatic payments never told me I was late. The result is two accounts with 60-90 days late going back nearly 2 years! Bad! I sent a GW letter to the executive office and they replied that they investigated and discovered that they were reporting accurately, except that there was one month they forgot to report, so they fixed that. Thanks a lot, guys.  Now the accounts are completely paid and I'm sending another letter. Does anyone have suggestions on what approach I should take? My first letter was VERY nice and full of gratitude to Chase for helping me learn good credit habits . . . yadda yadda yadda. That didn't get me anywhere. Should I push the fact that they didn't notify me? Throw myself at their feet and beg? Does Chase have a reputation for being hard-nosed about this stuff?

    Could you update us on how it goes with Macy's?? I currently have a 30 day late payment from 2013 that they refuse to removed, stating that if it wasn't their fault they won't remove it. I have called and sent emails out like crazy....getting kind of frustrated

  • Missing chasis in bios update

                       Trying to update two chasis's firmware to 2.0 3c. When I filter on bios the first chasis display's all b200 m3 servers. But the 2nd chasis with two b440 m2's is not visible at all to update.
    But when I filter on cimc/io modules etc... the 2nd chasis and its servers are visible for me to update/activate...I have tried to "acknowledge" the 2nd chasis with no positive change..
    Thanks

    The B440 doesn't have a two stage BIOS (Running/Backup) like the B200 M3s and other newer blades.  The only method to update the BIOS on B440 is via a Host Firmware Policy with the appropriate BIOS included. 
    Regards,
    Robert

  • ITunes wont let update song info AND creates duplicates of song files

    When I click "Get Info" some of my song information is grey and won't let me update or change song names, artist names or add artwork. It says the encoding is unknown, but some of it's come straight off a cd!
    Also, does anyones iTunes, duplicate songs? I keep getting two files of each song, and I have no idea why.

    This can also happen if they are WAV files, as WAV files don't support ID3 tags (i.e. song information tags).
    EDIT: On second thought, I think WAV files can have ID3 information, but they don't support artwork. Nevermind.
    Message was edited by: BehnRocker

  • CHASE MARRIOTT APPROVED AFTER VERIFICATION

    Intially applied for the chase sapphier card but was declined for too many new accounts opened and I heard that we have to wait for 2 years if we got this reply from chase. So since I like travelling a lot I thought it made sense to only apply for the marriott card and I did just that. Did not get instantly approved, called the backdoor number and a young lady spoke and for a second put me on hold. Though a another decline, but was told to fax in my address proof since there has been a change in my address. Faxed the documents and got in touch with the verification department who said they did not receive my documents and the person said he would verify me on phone itself. Instantly approved for $5k. 

    I too was approved after address verification. I was told I would need to verify my PO BOX address.. but then I pointed out that my existing Freedom card had already been sending statements to the PO BOX address for a couple months. I was put back on hold and then a couple minutes later told I had been approved for $5k and can expect the card in 7-10 days. Seems Chase does a very thorough job on anti fraud.  Congrats on your approval!

  • "People Picker" field not letting update SP linked table in Access

    Hello all,
    I have linked a SharePoint list to an Access database in order to manipulate some data. This list contains several fields, including a people picker in which its data come from SharePoint. 
    Once in my Access DB, I need to update some fields of this list, however when I try to change some values from a record that has the people picker populated I get the following error message: "you cannot reference rows created
    when you are disconnected from the server because this violates the lookup settings defined for this table". I only get this when I have values on people picker, I can proceed without any problem when I have it set as blank.
    So, do you have any idea on how to accomplish an update operation while having a people picker field populated?
    Thank you in advance.

    Hi Pedro,
    I recommend to check if the user populated in the RequestBy exits in User Information List in SharePoint site and the choices listed in Access for status field are existed in SharePoint Status column.
    Please refer to this thread for more details:
    https://social.technet.microsoft.com/Forums/office/en-US/8a7baf3b-5a3a-4631-82f9-b43d992155d1/updating-sharepoint-2010-list-from-access-2007?forum=sharepointgenerallegacy
    More reference:
    http://blog.incworx.com/blog/elizabeth-pecoras-sharepoint-blog/you-cannot-update-this-field-because-the-value-youre-trying-to-apply-is-not-valid-or-would-break-a-data-integrity-rule-error
    Best regards.
    Thanks
    TechNet Community Support
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
    [email protected]

  • PSE7 Restore to different PC fails to update drive letter in catalog

    I'm trying to simply copy my catalog and photos from my desktop to my laptop to have with me when I'm away. From all the discussions it seemed like backup/restore was the best method in order to preserve all the tags and other data associated with the images.
    Source Drive:
    Volume in drive H: is Data
    Volume Serial Number is 30AF-58D3
    Catalog: RH Main
    Picture Folder: h:\My Documents\My Pictures
    Catalog Folder: h:\My Documents\Adobe\Photoshop Elements\RH Main
    Backup Destination:
    Volume in drive M is OneTouch4 1-TB Serial number is e79a:bf54
    Now on the laptop I run the restore and choose 'Hard drive/Other Volume' and locate the Tally file on drive X: which is mapped to drive M on my desktop. It was simpler to restore across the network rather than moving drive M to the laptop.
    Under 'Restore Files and Catalogs to' I choose 'New Location', specify D:\, and check 'Restore Original Folder Structure'.
    On the laptop:
    Volume in drive D: is Apps_Data
    Volume Serial Number is 3069-7A44
    After the restore is complete, all of my photos are exactly where I expect them, D:\My Documents\My Pictures. The catalog is in D:\Catalog.
    The problem is that there are no thumbnails displayed for any of the photos. Examining the properties of each reveals that they are presumed to be on drive H: - their original location on my desktop.
    I could have easily copied the files myself, but I was counting on restore to do what I could not easily do - which was to update the database to reflect the correct location of the restored files. After all, restore PUT them there. Something must have convinced it that the drive letter containing the restored photos was still H:, but I'm at a loss as to how it could have come to that conclusion.
    Am I missing a step or am I expecting too much from backup/restore?

    The only drive visible to the laptop is X: which is mapped to M: on the desktop - the destination for the backup. The drive containing the original images on the desktop is H:.
    Automatically search and reconnect is checked.
    Update thumbnail doesn't work. Here's what's funny. Take a single example, a file named DSC_0005.JPG. I choose update and it starts scanning on D: and I can see it run through My Documents, My Pictures, and all of its subfolders. It turns out there are no less than 10 occurrences of that file name under My Pictures - each of them in a different sub-folder of course. So I let Update Thumbnail run and ended up at the reconnect screen where I can go find it manually. Why it didn't find any of those 10 files is a mystery. So I reconnected manually by browsing to the correct DSC_0005.JPG file - formerly at H:\My Documents\My Pictures\2009 01 01 but now on D: at the same path.
    Next I choose the thumbnail adjacent to it on the screen, DSC_0006.JPG. I check the rmf.3.cache file and the only entry in it is the folder that I just matched DSC_0005.JPG from - which is the same folder that contains DSC_0006.JPG. The process again runs for quite some time searching C: & D: for DSC_0006.JPG. Once again I'm presented with the Reconnect Missing Files dialog with no file suggested on the right side. So even with an entry in the cache pointing to D:\My Documents\My Pictures\2009 01 01, a folder containing a file named DSC_0006.JPG, it could not find a match!
    Back in PSE5 I had performed this reconnect on one file and then again on the rest as described on your web page and it worked as you described. So I'm familiar with that process but have not needed it lately, until now.
    The backup/restore functionality is so basic that I'm sure they tested it to some degree and it must work for some, otherwise many others would likely be griping. So there must be something unique to my setup that it's unable to come to grips with. Surely their internal testing of the restore feature included a test to restore to a different drive.
    Maybe they made the restore too smart. It certainly restores the file to the correct location based on the options I selected and the file retains its original name - but the database thinks it hasn't moved from the original location.

  • Has anyone experienced a problem with the adjustment brush since last update (for Mac) last week?

    Following an update to Lightroom on my Mac Pro work station last Friday: when I apply my adjustment brush to an area in an image, a faint box encompassing a much larger area than the size of my brush appears (extends well beyond the area I've identified with my brush and is clearly a large square shape). When I release my mouse, the adjustment I've made affects my entire image. I had no issues with adjustment brush prior to the update. I've been on the phone with Adobe support (no help). Have uninstalled/reinstalled Lightroom several times (no help). Adobe directed me to Apple (recommend use of Time Machine to date before Lightroom update came through). To ensure it's an isolated bug, I checked my MacBook Pro. Worked fine without update; I let update come through and find the adjustment brush "bug" is intermittent. When it occurs, however, I always see the larger "box" area, and the adjustment brush ultimately affects my entire image.
    Anyone else experiencing this? Adobe support insists it's a Mac issue. Thanks!

    Hi,
    Following an update to Lightroom on my Mac Pro work station last Friday: when I apply my adjustment brush to an area in an image, a faint box encompassing a much larger area than the size of my brush appears (extends well beyond the area I've identified with my brush and is clearly a large square shape).
    Same problem (rectangular areas) + others under Windows. The adjustment brush and the clone / heal tool have been totally broken in LR 3.2. You're not alone. See this thread. I have filed a bug report. No answer until now.

  • CC app manager update  failed with error code 50 after reaching about 35%

    Trying to update the CC app manager. The update is always very slow  (I have ATT DSL, lowest level) and I usually terminate it after an hour or so. Today I let it run and it failed with error code 50 after reaching about 35%. Any ideas?

    Update to my original post. I read through some of the suggestions that I found in other threads for fixing this problem, and it appears that this has been an ongoing issue. Numerous fixes have been suggested, some very convoluted, difficult, and involved, including those that came from the customer support folks.  I passed on those as this should be something simple. How Adobe manages to let updating of their own software turn into an ongoing problem is beyond me and sort of defeats the purpose of subscribing. I then noticed that a simple fix had been suggested a few times, so I tried that.
    The user suggested fix that worked for me was:
    1) Restarted computer (Asus Windows 7 i3 machine for me) in Safe Mode with Networking. Logged into my separate Admin account just in case.
    2) Started the creative cloud desktop app.
    3) The app said it needed to be updated. I hit the update button.
    4) Update started and proceeded slowly as it had in many previous failed attempts (I have ATT DSL at the slowest level, but it is not dial-up). Within about 30 min, the update succeeded.
    5) Restarted computer in normal mode.
    6) The creative cloud desktop app now did not say it needs to be updated, and I can update my other apps normally. Have not updated LR or PS yet, but plan to try. If that fails, I may try doing it in the Safe Mode with Networking.
    So, that was relatively painless and much much simpler than many of the other suggestions I saw. Do not know if it will work for everyone, but I wanted to post the fix that worked for me. Thank you very much to the 2 or 3 users who had suggested this fix earlier (sorry, I did not write down your IDs, but the threads can be found by searching for creative cloud desktop update fail error code 50). Hope this saves some people a lot of time.

  • When A536 will get the lollipop update..?

    Please let update of lollipop to A536 in the ending of this month..

    Plzz let update for lollipop to a536 ..
    We need this version.
    So plzz give update on this month

  • Will I really need a new Mac or will all iphone, iPad updates be cloud based?

    Our iMac is almost 6 years old and cannot be upgraded to Lion. I will need to somehow update our iPads and iPhones with a new Mac...or will I? I figure I have 4-8 months with w Leopard before my update days are over with my iMac....then what? We almost never use our computer anymore...Just about every thing  we need to do we can do on our iPad/iPhone. I am under the impression that "Soon....?" all update will be cloud based. Since everything will be stored in the cloud, why will I need a huge hard drive or an external HD other than to keep an emergency backup in the event of a catastrophic cloud failure. I guess my main concern is future updates with our iPhone/iPads.   Thanks, Bill

    Late 2006 - Early 2007 all Macs became Lion compatible (Core2Duo and Xeon processors with 2 GB of RAM is what is needed).    As for Cloud based updates, it is anyone's guess. Apple hasn't yet announced one way or another if your fear is going to happen.  Instead of worrying about that, try to make do with what you have, until you must upgrade to Lion because of some application compatibility, and then make sure all of your applications are Lion compatible before upgrading:
    http://roaringapps.com/apps:table
    So while you may not a new Mac, it will need to be newer than the Mac you originally got if it comes to be.  Don't let updates be the driving force of whether you get Lion.  Unlike Windows many people can stick with older copies of Mac OS X, and even Mac OS without worrying too much about security as long as they don't use Peer2Peer software, and only get attachments from people they trust.

  • Update Retriever - how to hide specific updates?

    Hi,
    while reading the System Update Deployment Guide, I stumbled upon the possibility of hiding updates from automatic downloading into the repository. As there are certain software products distributed via lenovos Servers, which I do not want to install onto our companies' computers, I would like to let Update Retriever skip these updates.
    I wasn't able to find the described funcionality in the program yet. Does someone of you know how to hide those updates?
    Thanks in advance,
    mat_ban

    Allan, as far as I can see it only allows me to include or not include Metadata by checkin the box in the Image Export window. I want to include most Metadata, particularly my name and copyright. There is one field where I keep my notes that I do not want to send with the photo.This is where my dilemma lies.
    thanks

  • JavaScript to call update button

    I have a button called update. This button is used to update table based on the changes on the screen.
    I have a javascript and I want to invoke this update button by doing
    doSubmit('UPDATE');
    doSubmit(anyinput);
    I want to do update first, then leave update screen.
    The problem for me is that sometimes it works ok. Sometimes it just didn't do the update.
    If I only do
    doSubmit('UPDATE');
    it looks like work ok.
    If I do
    doSubmit('UPDATE');
    doSubmit('GOHOME');
    This causes problems
    Is there a way let update finish, then go home?
    Thank you.
    Edited by: user628655 on Nov 11, 2009 3:14 PM

    Hello:
    Create a branch with a branch point of 'On Submit After Processing...' . Set the Target for the branch to be URL and for the URL specify your 'Home URL'. Set the branch to execute for the 'Update' button.
    varad

Maybe you are looking for