Check stock suggestions

Experts,
I was just posting this to see if anyone knows of any check stock that you can buy that matches up with original PD formats in the B system. If anyone has any suggestions that would be great. Thanks!
Kind regards,
Jeff Alderman
Support One

There are a lot of providers who can supply pre-printed checks in Check-Check-Stub or any other format but nothing might exactly fit SBO PLD.  Some customization might be needed as per Client requirements.
Costco Business has a good variety but you would probably need to select any other application like Dynamics as a Customized version for SBO is not available
Suda

Similar Messages

  • Check stock availability in non-PROD loc

    Hello,
    I have set my production st/location(PROD) in material master, When I creates the prod order it always check the stock availability in PROD location and pops up missing parts as stock is in raw materials loc.
    Can we set something, so that while prod order creation, it should check stock availability in all raw material locations (but not in PROD).
    added laterly----
    I think it can be done via OPJJ, no sto loc inspection, but what could be the pro/cons for setting this indicator.
    Please suggest.
    Regards,
    JPS
    Edited by: Bhatti JPS on Apr 7, 2010 5:35 PM

    JPS,
    If you make the OPJJ setting, it will check all storage locations in that plant, including PROD.  Depending on what this StLocn is used for, this is probably OK.
    Some companies 'stage' their materials, which means they move stock from RM stockroom to a production floor staging area location.  Then, they run their ATP.  'Missing parts' means they have to go to the RM Stockroom, get the missing stuff, and move it into the production staging area.  For these companies, they want PROD checked exclusively.
    Other companies (sounds like your company) don't stage their components.  They run their prod order ATP checks, and any missing parts list they hand to the expeditors, who may go to the department that makes the subassembly (manufactured component), or may go to Purchasing department to expedite the RM (Purchased component).  
    It really depends on the business requirements.
    Rgds,
    DB49

  • User Exit in ME51N & ME21N for checking stock at location

    Dear All,
    Requirement is to give error message while creatin a PR / PO for a material for whcih there is stock at XXXX storage location.
    Is there user exit for checking stock whiel creating PR and PO waih will check stock at a particular storage location ?
    OR any other way ..
    Regards,
    Rakesh

    User Exit
    PR -
    MEREQ001
    PO -
    MM06E004  Control import data screens in purchase order
    MM06E005  Customer fields in purchasing document
    ME_PROCESS_PO_CUST (BADi)
    Hope the above helps.
    Regards,
    Vivek

  • Check stock consistence

    Hi,
    I have used the transaction MB5K to check stock consistence: about several materials codes there is a red message that is : ' 506  miss an enter in the historical table'..What means?Where is the historical table and how can I correct this inconsistence?( In fact for these material there is a value stock =0 and instead it wouldn't be zero..).
    Please help me,10 points for a right answer.
    Thanks in advance,best regards.
    Maximilian

    you can use any material for consignment and if u wan tto consider certain factors for MRP then u may assign the specila procurement type in mrp views

  • HT1386 when i click on check for update, the iTunes wants me to provide me a file or something from my computer, instead, it should check and suggest for an update

    when i click on check for update, the iTunes wants me to provide me a file or something from my computer, instead, it should check and suggest for an update

    Demo,
    I'm not sure how I'm supposed to do that the instruction says since i am not familiar with Apple at all what are quick links even? Am i supposed to do this on Itunes on my Ipad or on the computer?
    this was that reply you mentioned.
    I spoke with Apple Tech Support and they guided me through this.  I was trying to get the App Store working on a new iPad mini using a new, but existing Apple ID.  To get it to work, I had to go onto iTunes on my main computer (not on the iPad).  I had been trying to use the Sign In button, and I was having the issue of being "forced" to enter a credit card, which I did not want to do.  Here was the solution I was given, which worked for me.
    Log out of iTunes, if you are not already.  (Or hit Cancel if you're on the Review Payment screen.)
    Instead of going into Sign In, go to Redeem under the Quick Links, on the right-hand side, down a bit.
    Go through the screens, accepting the EULA, etc.  You will get to a Review Payment screen, similar to the one you saw before, but it will have a None button.
    You can enter an iTunes card here if you want, but I was able to leave that field blank and still successfully get the account set up, ready to use on the iPad.

  • Fail to print check stock properly

    We have an HP 3210 all in one.  It's printing fine when I use regular multi use paper.  However, my checks are on a slightly heavier paper stock.  It is not printing these properly.  It does not seem to feed the paper through properly and I wind up with the payee, amount and other information printed much farther down than it should be.  Any suggestions? Thanks.

    I am answering my own post... perhaps will help someone else.
    The problem arises when the you attempt to set different clip rectangles as you render various page elements. Avoiding setting clip rectangles will help in avoiding the problem.

  • T.code for checking stock at WM level

    Hi Gurus,
                   I want to check the warehouse stock at Storage type level in previous week,Can any one give me T.Code where we can satisfy this requirement
    Regards
    Narayana

    Narayana,
    There is no std SAP WM report which will show you this. I will take some calculating to get a total for all movements for a material/ST/Bin/etc. I did it in excel and it took some time, but I'm sure you could write a basic query / ABAP report to get this.
    Good luck.
    Hein

  • MRP issue.  Extra stock suggested

    Hi there ,
                 I have one material say ABC which is to be procured from outside. Now I have maintained the schedule line aggreement & source list for the same . The safety stock is maintained as zero &  the lot sizing is weekly lot size.. I have generated some requirements of the same material say 100 - Week -1 , 50- Week-2 etc. Intial stock in SAP is zero for the material. The Max & min lot qty is kept empty in material master.
    When I am running the MRP then the SAP is creating a schedule line of 396 against the requirement of 100 .
    Please suggest me what can be the probable reason for the same .....??
    Thanks & Regards
    Kaushik Choudhury

    Dear,
    As I understood you have maintained Lot size- weekly.
    As per this system will take the requirement of that week and gives a planned order/schedule line at the last of the week or begining of the week depending on the lot isze key setting
    Now System is taking the requirement of future requirement as per yoyr communication right?
    But please let me know, what is the schedule line delivery date?
    Example 7th week PIR 100
                 8th week PIR 100
    Now in normal SAP when run MRP
    7th week PIR 100
    Schedule line 100 - del date 7th week end
    8th week PIR 100
    Schedule line 100- del date 8th week end.
    But in your system is the following is happening?
    7th week PIR 100
    8th week PIR 100
    Schedule line 200- del date 8th week end.
    Please come back

  • Availability check-----stock confm qty--Urgent reply.....

    Hi
    We have a below requirement..
    While creating sales order if the available stock is zero after doing ATP check,then we should not be able to save the sales order...(if confimed qty is zero,then saving of that particular item should not be done.It should throw out error message saying stock not available for that particular item).We should be able to delete that item and save remaining items in sales order.....
    Is there any standard config available for the same....

    hi
    http://help.sap.com/saphelp_crm40/helpdata/en/b6/de3efc6bbcdc4b948d466857a10323/content.htm
    reward if useful
    thanx & regards.. Naren

  • Health check script suggestions...

    I used the health check script from metalink and it gave me few suggestion regarding my replication environment. One of them is ...
    + SUGGESTION: One or more propagation processes contain rule sets.
    + If a Propagation process will unconditionally forward all incoming
    + messages to its destination queue, and no rule-based transformations are
    + performed by the Propagation process, you should consider removing
    + the rule set for the Propagation process via dbms_propagation_adm.alter_propagation.
    + This will improve Propagation performance.
    What is get from this is since i have same rule defined in propagation also as the one in capture, So suggestion from orcale is remove the propagation rule and let everything propagted through...anyhow since i want everything a capture process captures to be replicated on destenation.. so i removed the propagation rule. ..
    But now the replication has stoped performing after that.....
    can any one suggest me if my undersanding for above healthcheck suggestion is wrong then wht does it mean?
    Kapil

    Did you remove both the rule AND the rule set, or did you remove only the rule?
    If it was a positive rule set and you removed only the rule, you left an empty rule set as a positive rule set for the propagation. This will cause it to discard all messages.
    An empty positive rule set is not the same as no (null) positive rule set. A null rule set means "forward all messages, since there is not filter rule", but an empty rule set means "there is a rule: that no message will be forwarded".
    Ilidio.

  • Sales order checks stock and auto planned ord created for shortage quantity

    Hi,
    I have a requirement like, when I create a Sales order, it should check for the available stock. If stock exists, the delivery could be done using the stock. But if stock is less or partially available then, a planned order should be created automatically of the shortage quantity. Please guide

    Yes strategy 40 will work for the first part, but if stock are not there, then how to get Planned orders with reference to Sales order? Infact as i wrote before, we can get that as well using MD50 MRP run, but the process order has non valuated GR, the price for FG is zero. Can you help me with that, to get a valuated Goods receipt for the Finished product?
    You can check your self, in the Documented Goods list of Process order, the non valuated material marked "X"

  • How can I check stock value per valuation class at a certain period

    Hi,
    I have done this several times but with material ledger, but if I don't have material ledger available, how can I check the total stock value per valuation class for example at a certain period, lets say december 2012?
    I have check menu reports, and also the historical tables, but is there any standard to use?
    Thank you,

    HI,
    Please check transaction
    S_P00_07000140
    S_P00_07000139

  • Collective availability check stock transfer PO

    Hi,
    I'm looking for a transaction in order to do a collective availability check to stock transfer PO.
    Is it possible? Can i have a missing parts reports with all the stock transfer PO??????
    Thanks

    Rakesh,
    Here is how the system will behave.
    Product A requires X and Y. For making A = 1000 EA, we need X = 1000 EA and Y = 1000 EA.
    Stock of X = 1000 EA in unrestricted use. Stock of Y = 500 EA in unrestricted use.
    Assumption:Scope of check will consider only the available on hand inventory
    If we run MDVP, the committed qty for A will be 500 EA because it will consider the maximum possible qty that can be made with available stock.
    In MF60, for both X and Y the reserved qty will be 500 EA. The balance 500 EA of X will not be reserved for this planned order because, it will not be of any use until you receive 500 EA additional of Y. System will have it open for other planned orders if any.
    Hope this helps.
    Saravana

  • Checking stock in the inventory

    Hi experts,
       Can anyone explain where to check the material availability.I mean I need the tables
    which contains the quantity of a particular material is available in the stock or not.
    thanks in advance,

    Hi
    Try MCHB, MKOL tables
    Regards
    MD

  • Sales order ATP check - stock transport order

    Hi,
    When the sales orders is created it performs availability check on stock transport order as per the settings and confirms quantity. However, when the stock transport order carries a batch which has a restricted status, the sales order still confirms the quantity based on the stock transport order delivery date. I have applied OSS notes 350864 and 154682, but still the system confirms quantity, which has restricted status at batch level in stock transport order.
    Can any one help with a solution for this scenario?
    Thanks,
    Shiva

    Hi
      Try the following exits.
      EXIT_SAPLATPC_001
      EXIT_SAPLATPC_002.
      Reward points if this helps.
    Regards
    Karan

Maybe you are looking for