Choosing the project after Authorisation of Change req.

Dedar SolMan Gurus.
We have this issue to be solved. When I authorize the change request and I have more than one project for one system landscape (component), than for creating a normal correction the system sometimes offeres me one or more projects. On what metters it depends? On the phase of maintenace cycle. If yes than this should be wrong. No matter what phase is, I want to at least develop changes. I do not have to release them. If there is another reason please let me know.
When I am using u-gent correction the system let me choose even form the maitenace cycles in phas go-live (at least I think ).
Thank you very much for you answers.
Best regards,
Petr Syka

Hi,
The selection of project and maintenance cycle depends on the ibase you are selecting. You should always select the target system's ibase and based on the transport route created to the target system, the project gets selected.
In normal correction, your maintenance cycle should be in the phase 'Devlopement with Release ' or Developement w/o Release'. This is because you are using the task list of maintenance cycle. Normal correction does not have its own task list.
You can create u'gent correction till your maintencnce cycle phase is 'Emergency Correction'. U'gent correction has its own task list,so its not depending on the maintenance cycle task list.
Please revert in case of any doubt.
Rajeev

Similar Messages

Getting error when trying to deploy the SQL project after making some changes

I’m getting the below error message, when I’m trying to deploy the project by making some changes.
In detail, The project was deployed successfully at first time. Later I did some changes(Added 1 more table) and I tried to deploy, but it was not sucess. I'm getting the below error message
Error message:Cannot upgrade the DAC for database CTR_FIN_FINNOTE_DB because the compatibility level is 70 or lower. Alter the database to support a compatibility level of 80 or higher
I checked in SQL, the compatibility level is 110 which is higher than 70.
Can any one help me out to overcome with this.
Regards
Sk.

Try to uninstall you application and then deploy again with the new changes.
jdweng

Hello, I have been exporting my photos with a watermark. Without changing any settings, half way through my day things changed, and now about 1 out of 7 photos have the watermark after export. Change you helpe me change this back please?

Hello, I have been exporting my photos with a watermark. Without changing any settings, half way through my day things changed, and now about 1 out of 7 photos have the watermark after export. Change you help me change this back please? Has anyone had this issue before?

I'm sorry to learn that you have endured the audio issues outlined in your post for almost 2 years SusanLM1! This is certainly not normal! Let's get to the bottom of this issue, first please confirm your phone model; your mention that you have the iPhone 5 but your post is on the iPhone 5S forum. Also, share the iOS version currently installed on your phone. What is your ZIP code? Does this happen mainly while you make/receive calls from a particular location (home, office, etc)?
AntonioC_VZW Follow us on Twitter at www.twitter.com/VZWSupport

RH9-change the name of the project after it's been generated & released as help site.

I'm a novice non-programmer working in RH9 - client wants to change the name of the project that appears at the top of Internet Explorer. The project has been generated & released to their internal website. I've changes every file name I could find as well as the name in the title bar when you first generate it within RH. Any words of wisdom &/or advice are welcome.

It's not clear whether you are trying to do this the correct way which will require generating the help again or whether you are trying to change it just in the output on the server.
The latter is not good practice as it will get forgotten next time you generate and you will be back to square one. If you must do that, then it should be as simple as changing the start page title. You will need a copy of the file from the server. Open it locally and change the <title>, then upload it again.
The correct way is to go to Project Settings and change the name there, then regenerate.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

Aggregator suddenly doesn't play all of the projects after updates

I finished an aggregator project, checked it, etc. It was working fine. Then I downloaded some Adobe updates (Flash, Shockwave, Flash Player and Captivate 5), next thing I know, people are telling me that the project no longer works. I open it up, test it, and the files from the 3rd on won't start. They can be accessed from the Table of Contents, but they don't play. The playbar either doesn't move, or jumps back after a second. Nothing was changed in the files, I checked for pauses, Preferences options, nothing is set to pause/restrict playback. Also, the 3rd file's skin shows options that were unchecked. You can't move the playbar or skip ahead, but you can go back or forward to the other "frozen" files using the TOC.
Another wierd thing is that sometimes when I reopen the browser, it starts from the 1st frozen file and the TOC doesn't work at all. The swfs play fine when tested individually. I ended up having to make separate .exe files and linking them. Problem with this is that we need the htmls and when they are programed to open another project at the end, the original project doesn't close. Because of the nature of our work, we need one file to move on to the other without creating clutter of multiple browser windows open.
If anyone has encountered this, I would really appreciate some help. I have checked/changed internet settings, trusted site settings, system restored to before the updates, but nothing. I even had a co-worker republish the files from his non-updated computer and it still doesn't work.

You said you updated Flash player. What major and minor version number did you update to?
Were these projects originally created in Captivate 5 or an earlier version (e.g. Cp4)?
When the files don't play at all, what do you see? Is it a black screen?

Imovie won't choose the project themes

what can i do?

Hi b.ceci12,
Welcome to the Support Communities!
The information below from the iMovie Help Menu explains the behaviour you should be experiencing when adding themes to your iMovie '11 project:
Add a theme to your project
Add a theme
http://help.apple.com/imovie/movies/en/apple-ilife-imovie-tutorials_add_a_theme- us-20101020_640x360.mov
If your project isn’t already open (showing in the Project browser), double-click it in the Project Library to open it.
Choose File > Project Theme.The File menu appears in a light gray bar across the top of your computer screen.
Select a theme by clicking its thumbnail once; the theme previews automatically in the viewer on the right. You can click other thumbnails to preview those themes.
If this behavior isn't what you are experiencing, try adding a theme to a new project.
If the issue persists, try these troubleshooting resources:
iLife: Troubleshooting Basics
http://support.apple.com/kb/ts3249
Apple - Support - Mac Apps - iMovie
http://www.apple.com/support/mac-apps/imovie/
Cheers,
Judy

Newbie, what to with the project after it's finished?

total newbie here... I just finished my first DVD using FCE. Once you're done, what do you do with the project file and all the associated files?
Is there a way to have everything archived into one folder (i.e., like InDesign's "Pre Flight" and "Package" features)?
What happens if my source files are in different places on my computer, and after I archive it, I open it? Won't the mapping to the files be off, FCE can't locate them?
PowerMac G5 Dual 2GHz Mac OS X (10.3.9)

My back-up methods for FCE projects:
1) I blow up all my Capture Scratch clips. I save the original DV footage, and since I am careful about my reel numbers, I can re-capture it later
2) I copy all my other media: music, Photoshop files, LT projs, etc onto a DVD.
3) On the DVD I also store my FCE project file and my iDVD project file if I have one. Also include any drop zone movies I may have made .. sometimes this eats up a couple DVDs
Once I have all this, I can easily re-create the projects through Capture Project in FCE or by loading up the iDVD project
I also record the Timeline of the FCE project to DV tape, to make copies, etc
Also nice to save a Disk Image of your iDVD project, for later copies

I've lost my audio in the project, after exporting

I exported my project, and then wanted to modify the project still further- which I did. Only to find that all of my own audio has disappeared- that is, the green tabs are still there in the timelines, but they don't play anymore. Only the Apple jingles and sound effects are still audible. Did exporting it close it down somehow definitively?
Any help gratefully appreciated.

This other thread contains the answer:
http://discussions.apple.com/thread.jspa?threadID=1682087&tstart=0

Billing for the projects after cutover

Dear All,
I have uploaded initial stock and Goods issue for the projects that are open in the legacy system.
I want to know how to do billing through FI as i have done PGI for the open projects in the legacy system,i upload the materials through MB1A .
Please advice.
Muzamil

try revenue reposting KBxxxx transactions

Is there a way I can automatically reinsert my original HD clips back into the project after optimizing them?

Hi, I'm working on an important video project, which I filmed with my Canon 550D in HD. Initially, I wanted to maintain the HD quality but (as I am using a Macbook Pro 2.4 GHz Intel Core 2 Duo) it proved to be impossible to edit. I then subsequently optimised the footage to Large 960x540 and easily continued my work. And so now I am quite close to the hand-in date and while the video is fine as is, I was wondering if there was a way to reinsert the original HD footage now that I've finished editing (I still have them in the 'iMovie Original Movies' folder) so it automatically 'swaps' itself with the edited footage?
Thanks in advance!

This error sounds to me like you have/had BootCamp Windows installed and then removed, posible ?
If so (and even if not so), try restating your MBA while holding down the alt/option-key until you get to the Boot Selection Screen.
Choose to boot OSX.
Once in OSX go to System Preferences then Startup Volume and set your OSX to be the default.
Hope it helps
Stefan

Workflow status is missing from the List after make some change in workflow

Hi,
We have this strange situation where the workflow status is missing from List views. Here is the situation:
Now if I check the All List view of this list, I can see these workflows that shows the status of the workflow - say "In progress", "Completed" etc.
When i make some workflow modification and after i save and publish. The workflow status in List will missing.
This issue happening is intermittent.
Why does this happen?
Any workaround/findings for the above scenario are much appreciated.
Thanks
JWei

Hi JWei,
The workflow status column gets created when you first create the workflow and its first instance runs. The columns gets removed (and disappears from the view) if you delete the workflow or remove all instances of the wf on the list.
Please check whether you created some lookup columns in this list. If yes, please increase the lookup threshold for that web application in Central Administration.
Please create a new view which only contains the Title column and Workflow Status column, modify the workflow, check the workflow status column in the new view, compare the result.
Please create a new list, create a workflow, and test again, compare the result.
Please check if the link below is useful for you:
http://naimmurati.wordpress.com/2013/11/11/workflow-progress-column-missing-in-a-document-library/
Best Regards,
Wendy
Wendy Li
TechNet Community Support

How to change the project's language?

Hello,
When creating a new DynPro Project you need to choose the Project language when you set the Project name. The default there is: "American English".
Let's say I've created a project based on a certain language. Is it possible to change this language later on in the project? If yes, then where?

hi Roy,
Do u want to change the language in which the application is displayed. In that case u can creat .xlf files for the same and add it in the project.
The language can be changed in the web browser.The appropriate xlf file data will be picked then.
For creating .xlf files u can chk this link
http://help.sap.com/saphelp_nw04/helpdata/en/04/ee8b8b0d23b746854897adc5611c1d/frameset.htm
and this
http://help.sap.com/saphelp_nw04/helpdata/en/2d/e7381138a8d2458f1f4fac32614f71/content.htm
I would be least surprised if this doesn't fit ur requirements. coz am not sure if this what u want.
Regards
Bharathwaj

Project creation when the project number is changed

Hi,
The project number has been changed by the user, for the same project(eg.AC-200) project version is also created and commitment items are also there.
Could some one tell me how to solve this problem, since it is not allowing to change the number of the project again. It throws out a message saying that, project version is created.
Thanks
Arun.An

Hi,
On creation of Project, there will be project version created in back ground.It will be difficult to change the project numbers after completion of the complete projects. However project number hierachy can be changed.
Hope this will help you.
Regards,
Rakesh Pradhan

Where we can check the changes that we have done in the Projects

Dear Friends,
I have done few changes in the project WBS element after saving the Project, Now I want to check what all the changes that I have done in the WBS.
In which transaction I can check these changes apart from u201CCN60u201D, and please explain step by step what all the customizing setting are required to check these changes.
In Projects is it possible to check the way we are checking the changes in PO and Sales Orders.
Regards,
Sai

Nitin Patoliya,
Thanks for the inputs, I have tried as you suggested there it is showing system status Created and released, but Iu2019m not getting the information as I required. Here exactly what Iu2019m looking is If I have done any changes in the Project, Eg: after saving the Project if I have changed the Business area, profit center u2026.etc, I need the information when I have changed this data and at what level (WBS, Network or Activity).
Regards,
Sai

Cannot save the configuration after zone changing.

The customer is trying to save the configuration after a Zone changing. The error message is the following:
# copy running-config startup-config
2008 Oct 10 13:22:45 SW1SU %ZONE-2-ZS_INIT_FAILED: Failed to save persistent configuration
2008 Oct 10 13:22:45 SW1SU %ZONE-2-ZS_INIT_FAILED: pss_create failure, code = 0x8048001e, URL = sync:/mnt/pss/zone_zs_active_zset_cfg
2008 Oct 10 13:22:45 SW1SU %SYSMGR-2-CFGWRITE_ABORTED: Configuration copy aborted.
Configuration update aborted: request was abort
or
#copy running-config startup-config
2008 Oct 10 13:22:45 SW1SU %ZONE-2-ZS_INIT_FAILED: Failed to save persistent configuration
2008 Oct 10 13:22:45 SW1SU %ZONE-2-ZS_INIT_FAILED: pss_create failure, code = 0x8048001e, URL = sync:/mnt/pss/zone_zs_active_zset_cfg
Does someone has any idea how to solve this problem?

The root cause is the compact flash card. There was a software fix attempted in 3.0.2 but is not 100%. If the problem shows up again, the reload will clear it, but the ultimate fix is to replace the compact flash card with a new one. In some instances, based on your service provider, this may be a complete chassis replacement. This requires license re-homing as licenses are tied to the chassis serial number. I believe it has to do with the number of writes to the CF card. At some point, the card goes into a read only state and reload is the only option to clear it.

Choosing the project after Authorisation of Change req.

Similar Messages

Maybe you are looking for