Choosing which question slide to provide points for the results slide

Hi all
I am having some issues with a new project I am working on. I would like, throughout the course, to give the user some questions to gauge their understanding of the subject. However these questions are not to be included in the overall quiz results slide at the end.
I am asking a question, then explaining where they went right or wrong. Then carrying on with the course. At the end I would like a new set of questions that concentrate on what they have learned throughout the course. However when I do that, the results page also adds the quiz results from the review questions earlier in the course.
is there anyway I can have this seperate so I can choose which questions will be counted in the results slide?
thanks
Julie

Hi there
Sorry it has taken so long to reply to you I got caught up in another project. I've now come back to the original project and I looked at the Advanced Interaction panel. Can you please tell me how to change the settings, for instance, change so that the question is not part of the overall total? I have changed the question slide to a survey slide but I'm not getting the option to direct users to a different page for correct or incorrect. Even when I do have survey questions they still come up in the overall quiz total. I have upgraded to Captivate 6 now and I was hoping that this would have been rectified.
I've contemplated creating my own custom question slides but the questions I need is a matching questions, so don't think I can recreate myself, or can I?
Any help you can give me would be really helpful.
thanks
Julie

Similar Messages

How to find table name which provide data for the DataSource

Hi friends,
How to find the Table name which providing data for the Business content DataSources (Master Data). Is there any table or Transation which give datasource and Table name at once.
Thanks&Regards
Revathi

Hi Revathi...........
1)If the datasource is extracting data from any table.................open the datasource using RSO2..........there u will get the table name......
2) If the datasource is extracting data from any view.............go to RSA2..........copy the view name..........go to SE11 >> give the view name >> and check..........
3) If Datasource is Function module based............then u hav to check in RSA2 >> give the datasource name >> execute >> there u will find the Extract structure name......Copy the Extract Structure name >> Go to SE11 >> in the Data Element field give the Extract structure name >> Display >> From the Entry Help/Check tab u can get the Table name............
If u double click on the Extractor..............u will get the Function Module..............from there also u can check that the FM extracting data from which tables............
For Other datasources also...........u can get the structure name from here........
4) If the Datasources r LO datasources............then u can get the table name in LBWE.............LO extractor - goto transaction LBWE.................... Select the maintenance link for your datasource............
here in the right hand pane.........in the drop down box, you can see the structures associated with this extractor ........ just remove the MC for the structure names to get the base table names. e.g. EKKO for MCEKKO.
5) There is a pattern for the Extract structure name for LO datasources.............for an example..........
DataSource 2LIS_11_VAITM ......Extract structure name is MC11VA0ITM
2LIS_11_VAHDR >> MC11VA0HDR
Hope this helps.........
Regards,
Debjani.......

Points for the blog created in September 2013

Hello there
I posted a blog in September 2013. I do not see the points awarded for it. I did check the profile settings to earn the badge and one of them does state that you need to post a blog, which I already did.
Kindly do the needful!
The link to the blog is as follows:
How to Ensure that BPC Displays Only Uploaded Records for Planning
Regards
Gajendra

Hi Gajendra,
You posted your blog as personal blog. So no points assigned.
If you post technical docs/blogs at related forums then only you will get points.
No points for personal blogs/docs.
If you posted at BPC 10 NW forum. you may get points for the same. at below forum you need to choose create blog or doc.
SAP Planning and Consolidation, version for SAP NetWeaver
Thanks

SSRS 2008 Column Chart with Calculated Series (moving average) "formula error - there are not enough data points for the period" error

I have a simple column chart grouping on 1 value on the category axis. For simplicity's sake, we are plotting $ amounts grouping by Month on the category axis. I right click on the data series and choose "Add calculated series...". I choose moving average. I want to move the average over at least 2 periods.
When I run the report, I get the error "Formula error - there are not enough data points for the period". The way the report is, I never have a guaranteed number of categories (there could be one or there could be 5). When there is 2 or more, the chart renders fine, however, when there is only 1 value, instead of suppressing the moving average line, I get that error and the chart shows nothing.
I don't think this is entirely acceptable for our end users. At a minimum, I would think the moving average line would be suppressed instead of hiding the entire chart. Does anyone know of any workarounds or do I have to enter another ms. connect bug/design consideration.
Thank you,
Dan

I was having the same error while trying to plot a moving average across 7 days. The work around I found was rather simple.
If you right click your report in the solution explorer and select "View Code" it will give you the underlying XML of the report. Find the entry for the value of your calculated series and enter a formula to dynamically create your periods.
<ChartFormulaParameter Name="Period">
<Value>=IIf(Count(Fields!Calls.Value) >= 7 ,7, (Count(Fields!Calls.Value)))</Value>
</ChartFormulaParameter>
What I'm doing here is getting the row count of records returned in the chart. If the returned rows are greater than or equal to 7 (The amount of days I want the average) it will set the points to 7. If not, it will set the number to the amount of returned rows. So far this has worked great. I'm probably going to add more code to handle no records returned although in my case that shouldn't happen but, you never know.
A side note:
If you open the calculated series properties in the designer, you will notice the number of periods is set to "0". If you change this it will overwrite your custom formula in the XML.

My Time Capsule has stopped backing up. I have an Apple Time Capsule which backs up by wireless. For the last 3 days it has not backed up. I get this message: "The backup was not performed because an error occurred while copying files to the backup disk.

My Time Capsule has stopped backing up.
I have an Apple Time Capsule which backs up by wireless. For the last 3 days it has not backed up. I get this message:
"The backup was not performed because an error occurred while copying files to the backup disk."
I have gone into Mac Help and followed this down to stage 4:
under shared it lists my time capsule and my husband's iMac - both use the time machine but we have switched his off temporarily. Clicking on my Time capsule I get "Connected" and "Sharepoint" - I didn't have to enter connect or password
I don't understand stage 5: how and where do I select the disk or volume that contains Time Machine backups ? How do I know which it is? My disk utility lists 160.04 TOSHIBA MK... with sub-heading Macintosh HD. It also lists (with a "CD" icon) HL-DT-ST DVDRW GS22N
Under stage 6, how and where do I Locate your backup ? I try dragging my Time capsule from Finder to the Disk Utility side panel but it won't go. What is my computer's name?
Please someone help! I'm completely stumped.
Thanks,
Maggie
Mac Help says:
If you back up to a Time Capsule or network disk:
Open the Time Machine pane of System Preferences, and slide the switch to Off.
Open Time Machine preferences
Open Disk Utility, which is in the Utilities folder in the Applications folder.
Open Disk Utility
Make sure the Time Capsule or network disk is turned on and available.
Open a Finder window, select your Time Capsule or network disk in the Shared section of the sidebar, and click Connect. If necessary, enter your user name and password.
On the Time Capsule or network disk, select the disk or volume that contains Time Machine backups. Depending on how your Time Capsule is set up, there may be one or more disks or volumes.
Locate your backup, and drag it to the Disk Utility sidebar.You can identify your backup by looking for your computer’s name in the backup’s filename.

Hello,
Thanks to the great Pondini...
http://pondini.org/TM/C3.html

How to provide formulae for the columns in report based on date column

Hi,
How can we provide formulae for the columns in report, where each column is based on another Date Column.
Can anyone suggest on this.
Thanks

Hi Manu,
I think you a logical column X on which you created another Logical Column Y.
Now you want 'Y' to be filtered based on Date Column.
1. If, my assumption is right - You can do your requirement i.e. Filtering the logical col. 'Y' on Reports.
Else,
2. See - Your Logical column 'Y' While creating log. column 'Y' make sure you use any expression builder to filter across Date column. (i.e. using any case statements or where clause).
Else,
3. Make sure your First Logical column comes from Table by default (i.e. Create the same col. in d/b so it would be your Physic col. )
Thank you.
Edited by: GRK on Jan 28, 2013 7:48 AM

Can I use the Ethernet Port for a computer when it is also used as a wireless network with an Airport Extreme as the access point for the wireless network

Can I use the Ethernet Port of the A1264 Airport Express to connect to the Ethernet port of a computer that does not have wireless capability when the Airport Express is also used on a wireless network with an Airport Extreme 5th generation as the access point for the network?
I have AE 5th gen
looking to buy (from ebay) the AEX A1264
Various computers, printers and hubs for the network
Is this possible to do?

Bob, Thanks for the info. I have read different articles that said yes, but I wanted to make sure before I commit to buy. I have an older A1084 which I could not use the Ethernet port. I know at one point I was able to when I was on 10.4. Now that I am on an Intel processor and 10.8 I am going to have to upgrade some of my Apple wireless hardware.
Thanks Again.

How to increase Decimal Points for the BOM Component Quantity

Hi All,
While creating BOM:
Can anyone help me to know how i can increase the Decimal points for the BOM components quantity.
I can able to give only upto 3 decimal points, but the requirement is more than that.
I have increased the Decimal point value to 5 in transaction Code CUNI. but still it is allowing me to enter only upto three decimal places.
Thanks and Regards
Khadeer

Khadeer,
You would be better off changing the base quantity of the parent part. Instead of "1 EA parent contains .00003MG of component" you could say "100 EA parents contain .003MG of component".
Alternately, you could use different units of measure for your parent or component parts, which would be more suitable for the 3 place decimal limitation.
I agree with Anil in that if you elect to change the decimals from standard, you could end up with huge changes that will propagate through every module in the ERP. In my view, there is no need of this kind of headache.
Best Regards,
DB49

Looking for a good starting point for the HR module

Hello,
Can someone please send links to help/blogs which will be a good starting point for the HR module?
Thanks,
Roy

Regarding Payroll configuration
https://forums.sdn.sap.com/click.jspa?searchID=8283334&messageID=4763364
follow wht our gurus has said

I have two partitions and want to choose which to login to. Cannot remember the key combination to hold on power up

I have two partitions and want to choose which to login to. Cannot remember the key combination to hold on power up

Hold down the Option key on the keyboard.

Easy Points for the Quickest Poster

Worlds dumbest question, I'm sure, but for the life of me I can't figure this out:
Video_TS folder .... does DVDSP automatically create one for every project or do I have to export one? I can't find a button to create one and all I see on my hard drive is the project file and MPEG folder.
PowerMAC G4 Mac OS X (10.4.2)

Just 1... I'm feeling stingy today
Ahhhh... My toolbar was shortened and I never clicked the arrow to reveal the rest! I knew it was a silly thing like that.
Thanks

Break point for the particular user

Anybody knows how to set up a break point for the particular user on a particular statement. So I can see this breakpoint on my screen when it happened?

Hi,
If the user ID is USERA then set a breakpoint for USERA as :
BREAK USERA.
Cheers,
Aditya

Which mac mini should i go for: the one with AMD graphic card or Intel. I meanly going to use it for hometheater and HD movies.

which mac mini should i go for: the one with AMD graphic card or Intel. I meanly going to use this for hometheater and HD movies.

Intel HD 3000 graphics card can easily handle HD movies up to 1080p. But if you are looking at higher resolutions possibly 4k or 8k that are being released this summer in new TV's, I would go with the AMD card. The AMD card would be good for video and picture applications and also games. But if this is strictly to power your 1080p home theater setup then the choice is obviously the Intel HD 3000.

Error Logging In with live Connect Oauth2: invalid_grant The provided value for the 'redirect_uri' is not valid

Hello,
I've been working with oauthwebsecurity to add a few identity providers to work with for authorization. But for some reason i can't get the Oauth2 protocol to work with windows live. I constantly get this error:
{"error":"invalid_grant","error_description":"The provided value for the 'redirect_uri' is not valid. The value must exactly match the redirect URI used to obtain the authorization code."}
I've checked the redirect_uri i send to the initial login request, and i get an access code back. but when i attempt to request the access token in the callback I get the error above even though the redirect_uri i send in the callback request is the same
as the initial log in request. any help or ideas would be appreciated.
Thx,
Ruud

Hello Ruud,
How are you? I just posted a similar problem, however, I vividly understand the process flow. I believe this is a bad design and your can review my post entitled "Azure
Graph API oAuth 2.0 - redirect_uri required - bad design." People are already starting to experience the problem and this wasn't required in the previous version.
I'd like to know Microsoft's feedback on this, particularly someone who has experience / insight into development.

I am missing "other" as a target for the result state

Hi,
I am trying to implement a quite complex scenario using guided procedure design time.
I am not able to find other as a target for the result state of a callable object (the system proposes me just the sequential action or termination, nothing more, so I am not able to change my flow as I would like).
My portal is NW04s SP10.
I fount that target (other) using a portal sp11, so I suppose that it could be a problem concerning sp10 release, but I was not able to find a confirmation for that
Regards
Giuseppe

Hi Giuseppe,
If I have well understood youre trying to call in result state an action that is not in your current block.
To do this you have to install SP11 and the other will appear as possible choice in the result state target.
Regards
alessio

Choosing which question slide to provide points for the results slide

Similar Messages

Maybe you are looking for