Chunks of graphics missing

G'day folks,
I have written a program which uses a gui, which is a number of JTabbedPanes with JPanels etc, I have the repaint() in there and the program works beautifully on the 8 different computers that I have tested it on which runs from a P150 on Win98SE to a P1.7 on XP, all have jre1.4.1_01, I am having trouble with one particular computer which is a dell P!!!833 with 256 MBRAM running on WinMe. When you click on any tab, the titles of the other tabs dissappear and chunks of graphics go missing (sometimes textfields, labels, whole/parts of panels), I have run it from the command line and there is no exceptions thrown when this is happening so I don't think it is a problem with the program(plus the fact that it works perfectly on 8 other computers). I dug through the archives and found a reference to problems with sony viao products whcih people reported as having problems with getting the blue death screen and they decided that this was due to some of the ATI chips and the 3d graphics in java not working coherently, however the symptoms are different, there is no blue death screen only chunks of graphics missing.
The said computer runs all windows based programs flawlessly, it is only with java (but there are no exceptions thrown, which is wierd cause I've written stuff where there are graphics errors e.g. making a tabbedpane as the contentpane and then when you switch between tabs you get a whole buch of paintcomponent errors etc - there is none of this).
I've basically narrowed it down to being a problem with this one computer and was wondering if anyone could maybe shed some light on the more technical systems networking or any other suggestions!
the said computer has an ATI mobility Rage 128 graphics chip.
Thanks alot for your help,
Oz!!!!!!

If it runs fine on 8 other computers, that should pretty much tell ya there's some problem with the video of the problem machine.
A simple test is to right-click on screen and bring up screen Properties, go into Settings, then Advanced, then Troubleshooting panel and turn "Hardware Accelaration" all the way down.
Usually that will fix such problems, and if it does, points to a problem in the video drivers having bugs in that machine. If that does fix it, you can try updating the Video drivers and see if that works.

Similar Messages

  • CP6 Powerpoint Hi Fidelity Some Graphics Missing!

    Hi,
    I am so frustrated.....Have been using CP a lot since cp4 and am very experienced. I have a PPTX with animations. I imported into CP6 not usin HiF and everything worked fine but the HTML5 output was missing the graphics altogether. So I switched and re imported as Hi Fi and now the graphics are there, but not animated (see other discussion post).
    The issue I am having now is that in my SWF version, yes, even in just preview mode, SOME of the images from my PPT are missing. Any idea what is going on or how to fix it? I have tried changing the slide resolution to high, jpeg and optimized. Nothing helps.  Oh please send advice!!!
    Thanks,
      Lori

    Hi Rafiq,
    Thank you for help me!
    You're right. I published my movie for flash player 8, and
    some objects just disappear when they ran on flash player 7.
    The problem was the version of the plugin.
    Thank you again!
    Paulo Gouveia.

  • Graphics missing from wp

    Hello there,
    I trying to view the following ducument:
    http://otn.oracle.com/products/oracle8/htdocs/xsdotwp3.htm
    However all the graphics are missing. Any thoughts on where they might be?
    neil

    Could my problem be in same area?
    When I try to forward some e-Mails the URL disappears between when I click on forward and when it reopens in my forward window. Sometimes only the bottom tool bar appears, you can play Audio but no Video. Any help will be appreciated.
    Sparks894

  • Graphics missing from numerous sites. text boxes only

    On many sites. eg ebay. Nottingham tram times. Rail journey planner. All graphics are missing. Leaving basic text against large white blank areas.

    Make sure that you allow pages to choose their colors and that you haven't enabled High Contrast in the Windows Accessibility settings.
    *http://kb.mozillazine.org/Website_colors_are_wrong
    *http://kb.mozillazine.org/Websites_look_wrong
    If images are missing then check that you aren't blocking images from some domains.
    *Check the permissions for the domain in the current tab in "Tools > Page Info > Permissions"
    *Check that images are enabled: Tools > Options > Content: [X] Load images automatically
    *Check the exceptions in "Tools > Options > Content: Load Images > Exceptions"
    *Check the "Tools > Page Info > Media" tab for blocked images (scroll through all the images with the cursor Down key).
    If an image in the list is grayed and there is a check-mark in the box "<i>Block Images from...</i>" then remove that mark to unblock the images from that domain.
    There are also extensions (Tools > Add-ons > Extensions) and security software (firewall, anti-virus) that can block images.
    *http://kb.mozillazine.org/Images_or_animations_do_not_load

  • Chunks of song missing!

    I put some songs on my player. I was listening to it the other day and there are chunks of the songs missing, on some songs. Like it plays, then stops and then when I press fwd, it continues, but I need to know if this is the player or the song. Im pretty sure the file is ok, Im thinking its the player, but any help would be great.

    Hi There
    I had the same problem with my 1GB Shuffle on one song... but when i went on ITunes i found out the song was damaged and thats why it kept skipping and missing bits out...I think its best if you try out the song first before putting it through to your IPod. Good luck xxx

  • Tape graphic missing from picture frame

    In iWeb 9, when using a picture frame with the Scotch tape graphic at the top, the tape graphic is missing. The push pin works fine and the graphic is there, but the tape is missing. Where can I check for this graphic and restore it from where?

    It is kind of weird.
    I added an image with that tape frame and exported to a folder.
    When I opened the site - no tape.
    Cleared the browser cache, reloaded and there is was!

  • ReCAPTCHA works in IE8 but not in Firefox - Graphics missing

    reCAPTCHA works in IE8 but not in Firefox
    All graphics, the challenge, option boxes, and logo do not appear.

    Make sure that you do not block JavaScript.
    Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
    * Don't make any changes on the Safe mode start window.
    See:
    * [[Troubleshooting extensions and themes]]
    See also:
    * http://kb.mozillazine.org/Images_or_animations_do_not_load

  • Another pdf export problem with graphics missing

    well, it seems that there have been quite a few export probs w/pdf.
    i created some somewhat complex graphic files (wine labels) using keynote. then transfered them over to pages so that i would be able to print them
    more easily. when transfering them to pdf files i lose some graphics.
    the graphics that i lose are chinese characters...but only SOME of them.
    i've tried pdf/x, still the same problem, but then i have that funny shaded
    box around my letters.
    i've tried exporting directly from keynote, but the pdf image is markedly
    smaller than the oringinal document (with the comments hidden).
    any ideas...even the genius bar is stumped.
    macbook   Mac OS X (10.4.8)  

    In general, if some Chinese characters behave in one way and some other ones in another, it is often because one uses the wrong kind of font. If you for example have the (simplified) character 话 and use a font for traditional Chinese it may sometimes fail - especially in MS Word.
    That said, I cannot reproduce your particular problem here. Both Keynote and Pages seem to handle this as well as they possibly can for me.
    Two things you can try:
    1. Change font, to make sure that it matches the character.
    2. Create another account on your Mac and see if you still have the same problem.
    What did the characters look like? Any fancy formatting with shadows or colours?

  • Huge chunk of music missing overnight!

    I'm running iTunes 10 on a Windows 7 operating system.
    Last night we had friends over and played music through our library all afternoon and evening. This morning when I went to turn some music on again, over 2 and half thousand songs are missing from the library! Out library has been built up over 2 decades and I am totally unimpressed!! I've located some of the music manually, and sometimes the library search will pick up an album if I link one file but on other ocassions,I'm having to manually link ever song. Yet others files and whole albums seem to have completely vanished off our system altogether!!! I'm also having trouble copying cover artwork (it used to be a case of finding the image online and copying it over to iTunes.
    I'm at a total loss! I don't even know how this happened let alone why. Can anyone help me? I'm guessing either my husband or one of our kids authorised the update some time last night but I'm now TOTALLY frustrated as we're meant to be going away and leaving our house to house sitters for 2 weeks tomorrow morning. I'd like them to be able to access our itunes library to listen to music while we're away!

    Either way, a huge amount of work.
    Yes.
    I would have to go in and identify the 20,000-or-so songs that I don't care to have synced onto the iPod right
    or put them onto a playlist of their own which can be non-synced (yours)
    Actually, you do it the other way around. You identify the songs you do want on the iPod and add them to a playlist.
    Songs you don't want on the iPod aren't put onto the iPod playlist. Don't put them on any playlist if you don't want.
    Then create a smart playlist with...
    Match Rule;
    Playlist is not {Music for iPod}
    This will help to keep your music organized.
    and either remove them from the Library (my method)
    If they are already in your library, I wouldn't delete them unless you are never going to use them for anything.
    Also, you would need to add them back later if you want them on the iPod.
    That's kinda like taking CDs you don't listen to right now and boxing them up and putting them into storage.

  • HP 15 -R033TX dedicated NVDIA Graphics missing

    Hi,
    I have recently purchased a HP 15-R033TX notebook and as per the specifications the notebook should have NVidia Ge Force 820 M 2GB graphics card , I have installed both the Intel HD Graphics & NVIDIA Drivers.
    PFA the sceenshot of the device manager
    But it is showing only dedicated memory of  64MB only in system .
    Can someone please help me out.
    This question was solved.
    View Solution.

    It is switchable graphics and works on an ad hoc basis. This may help:
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03519217&cc=us&dlc=en&lc=en

  • Help! One chunk of audio missing

    I'm putting together a highlight reel of my son's football footage, using a sequence for each game, and adding music to some parts of the movie. Then I put all the sequences together to make my movie. I've done this sort of thing a number of times before with no problems. Everything seems fine in FCE and I export my movie.
    When I go to iDVD, for some reason, right when one of the songs is supposed to come in, all audio disappears for the rest of that sequence. The next chapter then starts and everything is fine. I tried changing songs thinking that was the problem, but it wasn't. I've gone back and re-exported a number of times, but for some reason this 3 minute block of my 30 minute movie has no sound. Any ideas? Thanks!

    The mixdown audio should have gotten it.
    Try trashing the prefs and doing it again. use FCP Rescue:
    http://www.pistolerapost2.com/fcprescue
    Shane

  • Some graphics missing in Firefox - help!

    I have a web site here - www.yourearthminutes.com
    I have made my own page navigation links and have made them into objects by adding a virtually invisible shadow. I did this as I wanted to use an unusual font.
    I actually wanted the text to have a visual shadow too, but it does not look good in Firefox and doesn't show in Internet Explorer. To get around this, I put a dark copy of each word underneath a bright copy, to give the impression of a shadow.
    When the page is viewed in Safari, Chrome, even IE, my text buttons work fine. In Firefox, some of the top layers of the buttons disappear... leaving just my 'shadows' behind... Oddly, this doesn't happen for all of them, just a slight majority.
    Anyone got any ideas about how to get around this?
    cheers
    Steve

    Try combining the two layers into one image file as described in Old Toad's Tutorial #7 - Converting Photos w/Frames, Drop Shadows and/or Reflections into a Single JPG Image. That should get rid of the Firefox problem and reduce the number of individual files needed to load for the page.
    OT

  • Credit Card Graphic (Logo) not displaying in ESS Travel Expense

    We installed enhancement package 3 and activated/switched on the business function FIN_TRAVEL_1 to move to the new Webdynpro for Abap portal screens.
    Under the Create Expense option, you can view imported credit card transactions.   Within the table, there is a column for "Credit Card Company".   It currently has the credit card name but a graphic missing icon.   I found the icons under the Webdynpro component FITV_MIME in SE80.  All of the FI-TV configuration seems to be in place so my assumption it is something on the technical (like service activation via SICF) or Webdynpro side that is causing the issue.
    Travel is the first application that we are bringing live on the SAP Portal so it very well could be something basic relative to our portal installation.
    Does anyone have any suggestions for how to resolve this?
    Thanks in advance for all responses.
    Technical Information for UI Element:
    General Information About the Application and Component
    Application: FITE_EXPENSES
    Web Dynpro Component: FITE_VC_CREDIT_CARD_ITEMS
    Window Information: VC_WINDOW
    View Information: CC_ITEMS_VIEW
    Configuration ID: 1F14A06959CFC3EAA86FDDB34B2EBF21
    Information on Field
    Field ID: CC_ITEMS_ICONSOURCE_EDITOR
    Type of UI Element: IMAGE
    UI Element Library: STANDARD
    Attributes of UI Element
    List of Attributes
    Attribute Name Value Context Path Type
    ADJUST_IMAGE_SIZE      
    BORDER 0     
    HEIGHT      
    IS_DECORATIVE      
    SOURCE   CCC_BUFFER.ICONSOURCE STRING
    WIDTH      
    ENABLED X    
    TOOLTIP   CCC_BUFFER.CCOMP_NAME TEXT_CCARD
    VISIBLE visible (02)    
    VALUE_HELP_KIND      
    VALUE_HELP

    This one is a duplicated thread. Please take a look at the second one:
    Define Credit Card Provider Logo Reference in ESS
    Anja

  • PDF splitting problem

    Not sure if this is an Illustrator or Acrobat issue. Using Illustrator CS2, Acrobat Pro 9 and Quark Xpress 4 on Mac OSX 10.4.11.
    Have a 2 color graphic created in illustrator, includes a blend and drop shadow, but a pretty basic design. Imported into Quark 4.0 and printed to PDF. The graphic seems to be split. There are a few rectangular shapes bounded by hairlines, only barely noticeable. When file was sent to client the problem was more noticeable from their end, with chunks of the graphic missing - these missing parts seem to correspond with where the hairlines are appearing on my pdf missing.
    Fairly new to Acrobat 9 and CS2, so it could be something basic
    Any suggestions greatly appreciated.

    What if you open the PDF directly from Illustrator into Acrobat?
    Jon

  • Brush Cursor Problem

    Hello, I've been experiencing a weird brush cursor issue and I haven't been able to find anything online to fix it. 
    This cursor problem is different from the "chunk of cursor missing upon resizing" issue that so many people have had.
    In Photoshop, when I resize my brush using the "[" and "]" keys, I will  often see my cursor get distorted. It will very briefly appear to the  right of where the cursor should be and it will look kind of oblong.  Another distortion that occurs is the cursor very briefly becomes a half  circle that is a bit larger than the cursor should be. This usually  happens between 150px and 250px size and occurs with all brushes.
    I'm also experiencing a distortion when I move the brush cursor over to  the panels section. This distortion appears (again, very briefly) as a  broken up horizontal line just above the brush cursor. Also, within this  line, I can see the regular pointer arrow cursor. Sometimes I see two  arrow cursors within the line and other times just one. This happens  with all brushes of size 500px or less.
    I have updated my video card drivers to the latest version and I have updated my Photoshop with the latest patch. 
    I use Photoshop CS5 64-bit, Windows 7 Home Premium 64-bit, and a Toshiba  Satellite L655-S5157 with an Intel(r) HD Graphics video card. 
    I heard about someone with a problem somewhat similar to mine and he  said he fixed it by manually deleting his preference files. He had tried  doing the shift+alt+ctrl on startup to delete his preference files, but  it didn't fix the bug (I tried it too and it didn't work for me  either). 
    I would like to try manually deleting my preference files, but I just don't know where they are. 
    Thanks for any help.

    For you (or anyone reading this thread), try to get a machine with an embedded ATI or nVidia display interface.
    Intel seems to be coming out pretty strong in the laptop market because they offer embedded GPUs in their chipsets, but Intel has a LONG way to go to get their OpenGL implementations up to par.  What I don't understand is that they've been known for having relatively poor OpenGL implementations for years now.  It's not like they're a small company who can't afford to fund a good development staff.
    To this day I'm still fighting Intel-specific problems seen by people running my own OpenGL software, where ATI and nVidia implementations are rock solid.  Stuff that's documented - such as handing off an OpenGL context between threads - just fails utterly with an Intel driver/GPU.
    -Noel

Maybe you are looking for