Cisco 857W that freeze when a lot of traffic travel over a VPN tunnel...

Hi to all...
i've a serious trouble with 2 cisco 857w...
They will freeze!
Between them there is a ipsec tunnel, over the vpn tunnel there are 2/3 termianl services connections, and some outlook/exchange clients.
While all work great when only 2 terminals are working, the branch office router(sometimes also the main office router...) stop responding when someone other onen outlook or open a new ts connection. Both lines are 4mb download and 512 upload, that must be emough...
The attached config is the sh run of the router that freeze only sometimes (the other that freezes frequently is 90% identical).
I avent's still updated the adsl FW...
[code]
Init FW: embedded
Operation FW: embedded
FW Version: 2.5.42
[/code]
Until not too much traffic is sent trougth the vpn tunnel, all ok, work really well.
Someone can help me how to find where is the problem?? It's a config problem??
Thanks to all!

I meant to say I have a MBPro and an IPAD 3...

Similar Messages

I have a 5th gen ipod nano that freezes when playing songs. i can't turn off, change songs, turn volume down. song stays stuck and nothing works at all. any ideas??

i have a 5th gen ipod nano that freezes when playing songs. i can't skip, turn down volume, turn ipod off. it simply screeches as the song is stuck at a specific point. any suggestions?

You have 2 options: #1 - iPod Repair Tutorials
#2 - take the iPod Nano to an Apple store or an AASP. Whichever is more convenient for you.

How can I see shared review comments in a PDF when connected to a SharePoint server over a VPN?

I am using Acrobat Pro XI on Windows 7.
When I issue a shared review, hosted on our work SharePoint server, I always encounter problems when accessing my work network from home, over a VPN. My comments do not get published, and I cannot see comments that reviewers have published.
I issue the review PDF as an attachment when I open the review, and all reviewers save a local copy of this file. When I open the PDF, the "Welcome back to shared review..." screen is never updated with the number of comments. The server status always seems to show green, but the comment reporting mechanisms do not behave as they do at work. When I click Publish comments, I am usually asked if I wish to take ownership of unpublished comments by other reviewers (to which I click No). When I return to the office, everything seems to "just work" again. But this is hugely inconvenient if I am out of office for days on end.
I had this problem with my previous version of Acrobat, and no satisfactory solution was ever reached. I am most dismayed to find it is still present in version XI.
Please can anyone advise?

I don't know if you solved this issue yet. But we have the same issue in the pass, and clean the log files under "\Synchronizer\resources\" folder seems to be a solution. Here is the thread talking about it.
https://forums.adobe.com/thread/1426298?start=0&tstart=0

Computer freezes when I'm moving the mouse over flash videos

Hello,
Sometimes when I move the mouse over a flash video to pause it or to even start it, my computer completely freezes. I'm using a laptop and the LED that lights up whenever the HD is being used completely stops lighting, indicating that the hard drive is no longer being used.
All buttons stop working, including combinations like CTRL + ALT + Delete. The Caps Lock LED does not light up when pressing Caps Lock, and my mouse completely stops moving. All I'm left up is with a frozen image, and the only way to stop the computer is by pressing and holding the stop button on the laptop.
When I restart the computer, the websites and tabs restore on the next Firefox start-up.
I thought this only happened to YouTube videos, but now I've experienced it with another type of video.
This only happens in Firefox and with flash videos. Does anybody know how I can fix this?
Thanks!

Hello, thank you for the response.
I could try that, but the thing is, this only happens rarely. I don't know if there is any way to deliberately cause this, but freezing the computer is not the most pleasant thing, because it requires closing it by using the physical button on the computer, rather than the Windows Shutdown command.

CS4 freezes when editing audio.

Hello All,
I have a client that has a workstation that freezes when she edits audio in CS4. I have seen it happen and what it does is it keeps playing the audio but Adobe CS4 freezes until the audio is done playing or when she kills CS4. I have reinstalled Adobe CS4, talked to Adobe technical support, reloaded her workstation with Vista 64 bit, put in another hard drive for the page file, and ran through every troubleshooting document I could find on the forums and Adobes website. Her workstation is a Core2Quad 2.4GHz and 4GB of ram with Vista 64 bit.
This is an on-going issue that needs to be solved ASAP and any help would be appreciated from other users. I do not want to resort to calling Adobe technical support as I was not satisfied with their knowledge of their product.
Thank you,
Brian
Edit: Harm Millaard chime in if you have any suggestions. You seem to be very helpful on these forums. Also, you have a very impressive computer setup and props to you for putting it together.

While I feel that the Assets, or the Project, are probably the culprits here, you might want to look over this ARTICLE on "tuning up" one's NLE computer. Might be something useful in it - if not now, then for later.
Good luck,
Hunt

Cisco ASA 5505 Site to Site VPN tunnel up, but not passing traffic

Thanks to a previous thread, I do have a 5505 up and running, and passing data....
https://supportforums.cisco.com/message/3900751
Now I am trying to get a IPSEC VPN tunnel working.
I actually have it up (IKE phase 1 & 2 both passed), but it is not sending/receiving data through the tunnel.
The networks concerned:
name 10.0.0.0 Eventual (HQ Site behind Firewall)
name 1.1.1.0 CFS (Public Network Gateway for Palo Alto Firewall - Firewall IP: 1.1.1.1)
name 2.2.2.0 T1 (Remote site - Outside interface of 5505: 2.2.2.2)
name 10.209.0.0 Local (Remote Network - internal interface of 5505: 10.209.0.3)
On a ping to the HQ network from behind the ASA, I get....
portmap translation creation failed for icmp src inside:10.209.0.9 dst inside:10.0.0.33 (type 8, code 0)
I am suspecting that there is a NAT error and/or a lack of a static route for the rest of the 10.0.0.0 traffic, and that I may have to exempt/route the traffic for the HQ network (10.0.0.0), but I haven't been able to get the correct entries to make it work.
Below is the config.
Can anyone see if there is something sticking out?
: Saved
ASA Version 8.2(5)
hostname ciscoasa
enable password 8Ry2YjIyt7RRXU24 encrypted
passwd 2KFQnbNIdI.2KYOU encrypted
names
name 10.0.0.0 Eventual
name 10.209.0.0 Local
name 2.2.2.0 T1
name 1.1.1.0 CFS
interface Ethernet0/0
switchport access vlan 2
interface Ethernet0/1
interface Ethernet0/2
interface Ethernet0/3
interface Ethernet0/4
interface Ethernet0/5
interface Ethernet0/6
interface Ethernet0/7
interface Vlan1
nameif inside
security-level 0
ip address 10.209.0.3 255.0.0.0
interface Vlan2
nameif outside
security-level 0
ip address 2.2.2.2 255.255.255.248
time-range Indefinite
ftp mode passive
same-security-traffic permit inter-interface
same-security-traffic permit intra-interface
object-group protocol DM_INLINE_PROTOCOL_1
protocol-object ip
protocol-object icmp
protocol-object udp
protocol-object tcp
object-group network DM_INLINE_NETWORK_1
network-object Eventual 255.0.0.0
network-object T1 255.255.255.248
network-object CFS 255.255.255.240
access-list outside_1_cryptomap extended permit ip Local 255.255.255.0 object-group DM_INLINE_NETWORK_1
pager lines 24
logging enable
logging asdm informational
mtu outside 1500
mtu inside 1500
icmp unreachable rate-limit 1 burst-size 1
icmp permit any outside
icmp permit any inside
asdm history enable
arp timeout 14400
global (outside) 1 interface
nat (inside) 1 0.0.0.0 0.0.0.0
route outside 0.0.0.0 0.0.0.0 67.139.113.217 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
http server enable
http Eventual 255.0.0.0 inside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
crypto ipsec transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac
crypto ipsec transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac
crypto ipsec transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac
crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
crypto ipsec transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
crypto ipsec transform-set ESP-DES-SHA esp-des esp-sha-hmac
crypto ipsec transform-set ESP-DES-MD5 esp-des esp-md5-hmac
crypto ipsec security-association lifetime seconds 28800
crypto ipsec security-association lifetime kilobytes 4608000
crypto map outside_map 1 match address outside_1_cryptomap
crypto map outside_map 1 set pfs
crypto map outside_map 1 set peer 1.1.1.1
crypto map outside_map 1 set transform-set ESP-3DES-MD5
crypto map outside_map 1 set phase1-mode aggressive
crypto map outside_map interface outside
crypto ca trustpoint _SmartCallHome_ServerCA
crl configure
crypto isakmp enable outside
crypto isakmp policy 10
authentication pre-share
encryption 3des
hash md5
group 2
lifetime 28800
telnet timeout 5
ssh timeout 5
console timeout 0
dhcpd auto_config outside
dhcpd address 10.209.0.201-10.209.0.232 inside
dhcpd dns 8.8.8.8 8.8.4.4 interface inside
dhcpd auto_config outside interface inside
dhcpd enable inside
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
webvpn
group-policy DfltGrpPolicy attributes
vpn-tunnel-protocol IPSec l2tp-ipsec svc webvpn
group-policy FTMGP internal
group-policy FTMGP attributes
vpn-idle-timeout none
vpn-filter none
vpn-tunnel-protocol IPSec l2tp-ipsec svc webvpn
tunnel-group 1.1.1.1 type ipsec-l2l
tunnel-group 1.1.1.1 general-attributes
default-group-policy FTMGP
tunnel-group 1.1.1.1 ipsec-attributes
pre-shared-key *****
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum client auto
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
inspect ip-options
inspect icmp
service-policy global_policy global
prompt hostname context
call-home reporting anonymous
Cryptochecksum:701d8da28ee256692a1e49d904e9cb04
: end
asdm location Eventual 255.0.0.0 inside
asdm location Local 255.255.255.0 inside
asdm location T1 255.255.255.248 inside
asdm location CFS 255.255.255.240 inside
asdm history enable
Thank You.

I'm just re-engaging on the firewall this afternoon, but right now I'm getting request timed out on the pings....
Here's the output requested:
Result of the command: "show crypto isakmp sa"
Active SA: 1
Rekey SA: 0 (A tunnel will report 1 Active and 1 Rekey SA during rekey)
Total IKE SA: 1
1 IKE Peer: 1.1.1.1
Type : L2L Role : initiator
Rekey : no State : AM_ACTIVE
Result of the command: "show crypto ipsec sa"
interface: outside
Crypto map tag: outside_map, seq num: 1, local addr: 2.2.2.2
access-list outside_1_cryptomap extended permit ip 10.209.0.0 255.255.255.0 10.0.0.0 255.0.0.0
local ident (addr/mask/prot/port): (Local/255.255.255.0/0/0)
remote ident (addr/mask/prot/port): (Eventual/255.0.0.0/0/0)
current_peer: 1.1.1.1
#pkts encaps: 84, #pkts encrypt: 84, #pkts digest: 84
#pkts decaps: 0, #pkts decrypt: 0, #pkts verify: 0
#pkts compressed: 0, #pkts decompressed: 0
#pkts not compressed: 84, #pkts comp failed: 0, #pkts decomp failed: 0
#pre-frag successes: 0, #pre-frag failures: 0, #fragments created: 0
#PMTUs sent: 0, #PMTUs rcvd: 0, #decapsulated frgs needing reassembly: 0
#send errors: 0, #recv errors: 0
local crypto endpt.: 2.2.2.2, remote crypto endpt.: 1.1.1.1
path mtu 1500, ipsec overhead 58, media mtu 1500
current outbound spi: 8FC06BD1
current inbound spi : 42EC16F4
inbound esp sas:
spi: 0x42EC16F4 (1122768628)
transform: esp-3des esp-md5-hmac no compression
in use settings ={L2L, Tunnel, PFS Group 2, }
slot: 0, conn_id: 4096, crypto-map: outside_map
sa timing: remaining key lifetime (kB/sec): (62207/28464)
IV size: 8 bytes
replay detection support: Y
Anti replay bitmap:
0x00000000 0x00000001
outbound esp sas:
spi: 0x8FC06BD1 (2411752401)
transform: esp-3des esp-md5-hmac no compression
in use settings ={L2L, Tunnel, PFS Group 2, }
slot: 0, conn_id: 4096, crypto-map: outside_map
sa timing: remaining key lifetime (kB/sec): (62201/28464)
IV size: 8 bytes
replay detection support: Y
Anti replay bitmap:
0x00000000 0x00000001
Here's the current config:
: Saved
ASA Version 8.2(5)
hostname ciscoasa
enable password 8Ry2YjIyt7RRXU24 encrypted
passwd 2KFQnbNIdI.2KYOU encrypted
names
name 10.0.0.0 Eventual
name 10.209.0.0 Local
name 67.139.113.216 T1
name 1.1.1.0 IntegraCFS
interface Ethernet0/0
switchport access vlan 2
interface Ethernet0/1
interface Ethernet0/2
interface Ethernet0/3
interface Ethernet0/4
interface Ethernet0/5
interface Ethernet0/6
interface Ethernet0/7
interface Vlan1
nameif inside
security-level 0
ip address 10.209.0.3 255.0.0.0
interface Vlan2
nameif outside
security-level 0
ip address 2.2.2.2 255.255.255.248
time-range Indefinite
ftp mode passive
same-security-traffic permit inter-interface
same-security-traffic permit intra-interface
object-group protocol DM_INLINE_PROTOCOL_1
protocol-object ip
protocol-object icmp
protocol-object udp
protocol-object tcp
object-group network DM_INLINE_NETWORK_1
network-object Eventual 255.0.0.0
network-object T1 255.255.255.248
network-object IntegraCFS 255.255.255.240
access-list outside_1_cryptomap extended permit ip Local 255.255.255.0 object-group DM_INLINE_NETWORK_1
access-list No_NAT extended permit ip Local 255.255.255.0 Eventual 255.255.255.0
pager lines 24
logging enable
logging asdm informational
mtu inside 1500
mtu outside 1500
icmp unreachable rate-limit 1 burst-size 1
icmp permit any inside
icmp permit any outside
asdm history enable
arp timeout 14400
global (outside) 1 interface
nat (inside) 0 access-list No_NAT
nat (inside) 1 0.0.0.0 0.0.0.0
route outside 0.0.0.0 0.0.0.0 2.2.2.0 1
route outside Eventual 255.255.255.0 1.1.1.1 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
http server enable
http Eventual 255.0.0.0 inside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
crypto ipsec transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac
crypto ipsec transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac
crypto ipsec transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac
crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
crypto ipsec transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
crypto ipsec transform-set ESP-DES-SHA esp-des esp-sha-hmac
crypto ipsec transform-set ESP-DES-MD5 esp-des esp-md5-hmac
crypto ipsec security-association lifetime seconds 28800
crypto ipsec security-association lifetime kilobytes 4608000
crypto map outside_map 1 match address outside_1_cryptomap
crypto map outside_map 1 set pfs
crypto map outside_map 1 set peer 1.1.1.1
crypto map outside_map 1 set transform-set ESP-3DES-MD5
crypto map outside_map 1 set security-association lifetime kilobytes 65535
crypto map outside_map 1 set phase1-mode aggressive
crypto map outside_map interface outside
crypto ca trustpoint _SmartCallHome_ServerCA
crl configure
crypto isakmp enable outside
crypto isakmp policy 10
authentication pre-share
encryption 3des
hash md5
group 2
lifetime 28800
telnet timeout 5
ssh timeout 5
console timeout 0
dhcpd auto_config outside
dhcpd address 10.209.0.201-10.209.0.232 inside
dhcpd dns 8.8.8.8 8.8.4.4 interface inside
dhcpd auto_config outside interface inside
dhcpd enable inside
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
webvpn
group-policy DfltGrpPolicy attributes
vpn-tunnel-protocol IPSec l2tp-ipsec svc webvpn
group-policy FTMGP internal
group-policy FTMGP attributes
vpn-idle-timeout none
vpn-filter none
vpn-tunnel-protocol IPSec l2tp-ipsec svc webvpn
tunnel-group 1.1.1.1 type ipsec-l2l
tunnel-group 1.1.1.1 general-attributes
default-group-policy FTMGP
tunnel-group 1.1.1.1 ipsec-attributes
pre-shared-key *****
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum client auto
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
inspect ip-options
inspect icmp
service-policy global_policy global
prompt hostname context
call-home reporting anonymous
Cryptochecksum:301e573544ce0f89b3c597bdfe2c414a
: end
asdm location Eventual 255.0.0.0 inside
asdm location Local 255.255.255.0 inside
asdm location T1 255.255.255.248 inside
asdm location IntegraCFS 255.255.255.240 inside
asdm history enable

My blackberry bold 9900 makes a lot of freezes when i receive and sent on whatsapp

Device info
hey
i get my blackberry bold 9900 OS 7.0.0
it freezes a lot when whatsapp get in use, receive or sent, but when i close the application and restart the device, everything get back in exellent condition
the whatsapp application, is stuck in 2.9.571 version, it shows that i have to update it and when i do the update nothing happened still on the old version with a lot of freezes when i use it.
NB: this application effect the device with freezes since ever, before it get stuck in that version.
Hope you can help me, THANKS

@ericmor82
First thing? Check the File Free at Options > Status, what is the number at File Free?
Now, leaving the device powered ON, remove the battery of your device, hold a minute, replace and reboot.
What is the File Free now?
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

I've uploaded Acrobat XI Pro and it freezes when I'm using it. I uninstalled and re-installed. When I login, it says that it is unable to validate the account and has an option to use the trial. How do I fix this?

I've uploaded Acrobat XI Pro and it freezes when I'm using it. I uninstalled and re-installed. When I login, it says that it is unable to validate the account and has an option to use the trial. How do I fix this?

This is an open forum, not Adobe support... you need Adobe staff support to help
Adobe contact information - http://helpx.adobe.com/contact.html
-Select your product and what you need help with
-Click on the blue box "Still need help? Contact us"

Purchased used 4th g it has a lot of glitches sound is not working at all, shutting it off it automaticlly turns back on in 1 min, camera works but camcorder doesn't, all game apps work fine, did freeze when on app store but reset and it seemed to work.

my ipod touch 4th g is running ios 6.0.1 but is very glitchy. there is no sound and if I plug in earphones it freezes up. camera does work but freezes when i try to use Camcorder. App store was acting up but after reseting it multiple times it is working again. When I turn it off with the slidder it reboots after one minute. It is also hard to put into dfu mode and take back out holding consecutive buttons doesn't work....Was stuck in recovery mode for quite awhile till I used a program to kick it out. I did find youtube vidio that showed how to restore audio by deleating a file but of course this takes a little work and don't know if it would work with this ios. Was just wondering what I can try now. Would realy like sound. not so worried about camcorder. Did check settings and no apps are blocked.

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
iOS: How to back up your data and set up as a new device
- Make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

Every time I make a call or I'm receiving a call my phone is extremely static i can't hear the person on the other line and the person on the other line cannot hear anything They say that they hear a lot of static now my videos when I play a video on YouT

Every time I make a call or I'm receiving a call my phone is extremely static i can't hear the person on the other line and the person on the other line cannot hear anything They say that they hear a lot of static now my videos when I play a video on YouTube for instance works just fine Siri works just fine. I can't make a call or receive a call whatsoever because all I hear is static and I haven't dropped the phone in water nothing has really happened this literally happened overnight

This is a wireless carrier issue. The fact that the speaker & microphone work properly for other apps is a great indicator that your device is fine.
Contact your wireless carrier about your call quality issue.

Firefox freezes when using "Save link as" or doing anything that needs to browse local file directory?

System: Windows XP, Firefox 17.0.1.
Firefox freezes when doing anything that needs to browse local directory such as saving file, uploading, etc....For example, can't save any image using "save link as". When attaching a file in email, whenever the browsing to other location on the hard drive will freeze firfox, which turns to "not responding"....

We're sorry to hear that your Firefox seems to be crashing. Please perform the following steps to give us a crash report ID that helps us find out more about the cause of the crash.
#Enter about:crashes in the Firefox location bar (that's where you enter your website names) and press Enter. You should now see a list of submitted crash reports.
#Copy the most recent 5 report IDs that you see in the crash report window and paste them into your forum response.
Thanks in advance for your help!
More information and further troubleshooting steps can be found in the [[Firefox crashes]] article.

It seems that my firefox hangs/freeze when I'm playing youtube vids, unable to surf at all. When i check task manager it seems to be a plugin container.exe problem? Can someone help me pls..

My firefox sometimes totally hangs/freezes when i try to replay a youtube video. I click the play button but the whole firefox juz hangs. When i try to end task it, i noticed a firefox "plugin container.exe" process.. So i figure it might be a plugin problem? I hope someone can help me with this..
Its getting very irritating and i love using firefox for web surfing.
Thanks in advance for ur help

YouTube videos use the Flash plugin. You can test your Flash plugin and see what version is installed by going to [http://www.adobe.com/software/flash/about/ Adobe's Flash Player test page]. To update Flash to the latest version, see [[Managing the Flash plugin]].
Starting in Firefox 3.6.4, Flash is loaded in a separate plugin-container process. For the background, see the articles [[What is plugin-container]] and [http://kb.mozillazine.org/Plugin-container_and_out-of-process_plugins Plugin-container and out-of-process plugins (MozillaZine KB)].
If Firefox hangs when playing Flash videos at YouTube, it could be a video driver issue, Try turning off hardware acceleration in your [http://www.macromedia.com/support/documentation/en/flashplayer/help/help01.html Flash Player display settings] (visit any page that uses Flash, such as [http://www.adobe.com/software/flash/about/ Adobe's test page], then right-click the Flash animation, select Settings, and uncheck "Enable hardware acceleration" on the Display panel). ...More information here:
*[[Cannot view full screen Flash videos]]
*[http://kb.mozillazine.org/Flash#Performance_or_display_issues_with_certain_Flash_videos Performance or display issues with certain Flash videos (MozillaZine KB)]

Firefox freezes when going to a site or page that requires Flash Player, such as YouTube. I have the most updated version of Flash. Is there a solution to this problem?

I'm having trouble visiting sites or pages that require Flash Player, Firefox will just freeze when they're partially loaded and it will stay frozen until I close Firefox. This will happen with any page that uses flash player. I can disable it, but then I can't access the content which requires Flash Player, have to use a different browser and I'd rather just use Firefox.

Hello,
The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information.
Note: ''This will cause you to lose any Extensions, Open websites, and some Preferences.''
To Reset Firefox do the following:
#Go to Firefox > Help > Troubleshooting Information.
#Click the "Reset Firefox" button.
#Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
#Firefox will open with all factory defaults applied.
Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
Did this fix your problems? Please report back to us!
Thank you.

MacPro 2.5 GHx, Intel Core 2 Duo, running snow leopard 10.6.7 --Firefox asked me to upgrade, that's when troubles began -- when I open FX, get my default page, then it freezes, disallows any page changes, links die, no page scrolling.

Please, I need help! Working on a MacPro 2.5 GHx, Intel Core 2 Duo, running snow leopard 10.6.7 --
Last week, Firefox asked me to upgrade, that’s when my troubles began -- Now when open Firefox, I get my default page, and then it freezes, disallows any page changes, the links die, no page scrolling --
The only unusual aspect to my previous Firefox configuration, was that I installed a NO SCRIPT thing to get past the New York Times paywall — and I don’t understand how to un-install that, assuming that’s the issue --
Have downloaded and re-installed Firefox, don’t think this has helped in any way, HELP please?!? Thanks, george.

That would at least partially explain it.
These MacBook Pros drew more power than the power brick could readily supply, and so would only run at top speed when the power brick was supplemented by the battery.
Though the applicable tech note has been removed, it stated:
"If the battery is removed from a MacBook or MacBook Pro, the computer will automatically reduce the processor speed. This prevents the computer from shutting down if it demands more power than the A/C adapter alone can provide."

I've just upgraded my software to 10.8.5 and have discovered this morning that the autofill feature freezes when I try to use it.

I've just upgraded my software to 10.8.5 and have discovered this morning that the autofill feature freezes when I try to use it. I have worked through all of the suggestions in HELP. The autofill prompt appears when I start to fill in a form but doesn't then provide the option box to select autofill from my contact card, the autofill prompt remains on the screen and can only be cleared by closing Safari and then reopening it. This never happened before and in fact autofill has been working perfectly up until now.

You can create another iCloud account easily enough, but you will only be able to create a new @icloud.com address to go with it, not @me.com - and you can't transfer your @me.com address from the other account.Creating a new account will have no effect on the existing one.
However you don't need to create a new iCloud account to create an additional ermail address. You can add up to three 'email aliases' - these are additional addresses (not accounts) which deliver into the same inbox as the main account. (New aliases can only be @icloud.com ones; @me.com addresses cannot now be created.)
You should be aware before you start that once you've created an alias you cannot turn that address into a full iCloud account, move it to another account, or reactivate it if you delete it.
More information on aliases here:
http://help.apple.com/icloud/#mm6b1a490a
While you can delete aliases, you cannot delete the address you created when you opened the account.

Cisco 857W that freeze when a lot of traffic travel over a VPN tunnel...

Similar Messages

Maybe you are looking for