Cisco Outdoor Controller Based Access Point

Hi,
I am looking for Cisco Outdoor Controller Based access point model. The WLC is Cisco 2500 Series.
I have checked couple of outdoor models but all are mesh access point. I am looking for normal controller based outdoor access point ( just like controller based indoor access point models )
Thanks.

adding to Leo...
Cisco Aironet 1300 Series
http://www.cisco.com/en/US/products/ps5861/index.html
Cisco Aironet 1550 Series
http://www.cisco.com/en/US/products/ps11451/index.html
Cisco Aironet 1520 Series
http://www.cisco.com/en/US/products/ps8368/index.html
these all are Cisco OUTdoor APs.
Now u can choose as per ur req.
Regards
Dont forget to rate helpful posts

Similar Messages

Controller-based access points conversion

/* Style Definitions */
table.MsoNormalTable
{mso-style-name:"Table Normal";
mso-tstyle-rowband-size:0;
mso-tstyle-colband-size:0;
mso-style-noshow:yes;
mso-style-priority:99;
mso-style-qformat:yes;
mso-style-parent:"";
mso-padding-alt:0in 5.4pt 0in 5.4pt;
mso-para-margin-top:0in;
mso-para-margin-right:0in;
mso-para-margin-bottom:10.0pt;
mso-para-margin-left:0in;
line-height:115%;
mso-pagination:widow-orphan;
font-size:11.0pt;
font-family:"Calibri","sans-serif";
mso-ascii-font-family:Calibri;
mso-ascii-theme-font:minor-latin;
mso-fareast-font-family:"Times New Roman";
mso-fareast-theme-font:minor-fareast;
mso-hansi-font-family:Calibri;
mso-hansi-theme-font:minor-latin;
mso-bidi-font-family:"Times New Roman";
mso-bidi-theme-font:minor-bidi;}
Q:
I’ve the 1140 AP (LAP) flavor; can I convert it to Standalone access points?
If yes can you please explain how and if you have documentation that will be great.
Thank you all for reading and helping.

You can convert the AP from autonomous AP (aAP) to light-weight AP (LWAP) and vice versa. It all boils down to the IOS you run.
If you have a WLC, ollow the proceedure below:
Using a Wireless LAN Controller to Return to a Previous Release
http://www.cisco.com/en/US/docs/wireless/access_point/conversion/lwapp/upgrade/guide/lwapnote.html#wp157689
If you don't have a WLC, follow the proceedure below:
Using a Wireless LAN Controller to Return to a Previous Release
http://www.cisco.com/en/US/docs/wireless/access_point/conversion/lwapp/upgrade/guide/lwapnote.html#wp157689
If you find my post helpful, please do not hesistate to rate. Thank you very much.

Cisco module controller & 1131 access-point

I'm using a blade as a controller in a cisco router. trouble is it does not see
the 1131 access-points. does see 1020 access points. Any thoughts

If you are using OP 43 to tell the access points where to find the controllers you will need a new entry for the 1130 series of access points.

How to configure IP Address filter in Controller based Access Points ?

Dear Team,
Configuration:
i have 5508 series controller and joined the two Thin APs to the controller. WLAN controller is connected to PC where Multicast receiver is running for two Multicast IP addresses (IP1: 230.1.1.1, IP2: 230.1.1.2). Multicast sender is running for two IP addresses on Station.
Requirement:
When Station is associated to AP1, AP1 should block the multicast packets going to AP2 and vice versa . That is AP1 should be configured to block multicast packets going to 230.1.1.2 and AP2 should be configured to block multicast packets going to 230.1.1.1.
Thanks,
Harsha

I believe you could apply ACLs and check if that helps.
For more details about configuring ACLs, please refer to the following link:
http://www.cisco.com/c/en/us/td/docs/wireless/controller/8-0/configuration-guide/b_cg80/b_cg80_chapter_0110101.html#task_AA3AFA57D51647478E0C3511137C165E
Hope that helps.

Cisco 1524 Aironet Outdoor Wi Fi Access Points

I am using Cisco 1524 Aironet Outdoor Wi Fi Access Points for outdoor Wi-Fi Coverage with WiSM Controller. I want to cascade Bridge them with UTP/STP Cables instead of using MESH using the Ethernet Bridging Function inside the controller. But I cannot have a cascaded Bridge chain of more than 2 AP's. Can
anybody advice & help me in this scenario?

Hello Mohammed,
As per your query please refer to the link-
http://www.cisco.com/en/US/docs/wireless/access_point/1524/installation/guide/1524SB_addendum.html and it supports
Fiber (SFP) and Gigabit Ethernet interfaces
Hope this will help you.

PoE for Cisco 1242AG and 1310G Access Points

Dear All,
we purchased a Cisco 1242AG and a 1310G Access Point and in the DataSheet it was specified that these APs support Power-over-Ethernet. The problem is we don't see any RJ-45 port in either AP which could be used for connecting the AP to an PoE Switch. Can you please tell us how we can connect these APs to an 802.11af compatible PowerBridge (by Intermec) ? Thanks.

Hi Thorsten,
The 1242 should be good to go but the 1310 is powered quite differently. Have a look;
AP 1240 Series - Hardware (see diagram)
http://www.cisco.com/en/US/products/ps6521/products_installation_guide_chapter09186a008079b7f4.html#wp1071972
Connecting the Ethernet and Power Cables
http://www.cisco.com/en/US/products/ps6521/products_installation_guide_chapter09186a008079b7f4.html#wp1052781
1300 Series Power
Power
The access point/bridge receives inline power from the Cisco Aironet Power Injector (hereafter called the power injector). Dual-coax cables are used to provide Ethernet data and power from the power injector to the access point/bridge. The power injector is an external unit designed for operation in a sheltered environment, such as inside a building or vehicle. The power injector also functions as an Ethernet repeater by connecting to a Category 5 LAN backbone and using the dual-coax cable interface to the access point/bridge.
The power injector is available in two models:
Cisco Aironet Power Injector LR2 standard version (included with the access point/bridge)
48-VDC input power
Uses the 48-VDC power module (included with the access point/bridge)
Cisco Aironet Power Injector LR2T optional transportation version
12- to 40-VDC input power
Note The power injector and the power module must not be placed in an outdoor unprotected environment. The power module must not be placed in a building's environmental air space, such as above a suspended ceiling.
http://www.cisco.com/en/US/products/ps5861/products_installation_guide_chapter09186a008079b93b.html#wp1051840
Dual coaxial cable to run from the power injector to the 1300. See attached notes:
Cisco Aironet 1300 Series
Cisco Aironet 1300 Series Access Point/Bridge Power Injector
The Cisco Aironet 1300 Series Outdoor Access Point/Bridge Power Injector,converts the standard 10/100 BaseT Ethernet interface that is suitable for weather protected areas to a dual F-Type connector interface for coax cables that are more suitable for harsh outdoor environments. The Power Injector also provides power to the outdoor unit over the same cables with a power discover feature and surge protection. To support longer cable runs from your wireless network switch or router, the Power Injector LR is designed to accommodate up to a 100 meter coaxial cable run plus 100 meters of indoor cat5 cable?enabling total cable runs up to 200 meters. The Cisco Aironet 1300 Series Outdoor Access Point/Bridge ships with the Power Injector LR2 and an AC power supply.
From this link:
http://www.cisco.com/en/US/products/ps5861/products_data_sheet09186a008022551d.html
Cisco Aironet 1300 Series Outdoor Access Point/Bridge Hardware Installation Guide
Ethernet Ports
The access point/bridge dual-coax Ethernet ports consists of a pair of 75-ohm F-type connectors, linking the unit to your 100BASE-T Ethernet LAN through the power injector. The dual-coax cables are used to send and receive Ethernet data and to supply inline 48-VDC power from the power injector to the access point/bridge.
From this link:
http://www.cisco.com/en/US/products/ps5861/products_installation_guide_book09186a00804d3095.html
AIR-PWRINJ-BLR2
F-Type Connectors
Dual coaxial cable carries full-duplex Ethernet, DC power, and full-duplex console port (RS-232 connection)
From this link:
http://www.cisco.com/en/US/products/ps5861/products_data_sheet09186a00802252e1.html
Hope this helps!
Rob

Configuration of cisco aironet 1260 series access point..??

i hv a cisco aironet 1262n access point and a normal router(without wlan) with a broadband connection
now i want to use my access point as a wifi hotspot
but i am not able to access it, through web browser
i dont know how i connect wires so that i am able to access " AP access page" and also i forgot its IP address too so can u pls tell me how do i reset it to default

Your AP is most likely loaded with a controller-based IOS. You can easily convert this to autonomous IOS.
Read this: Using a TFTP Server to Return to a Previous Release

Typical propagation distance of outdoor(1552E series) access point

Hello All,
I need to propose an design for outdoor WAP deployment for an huge resort. As it is a complete open space area without any obstruction, I believe the signal can be propagated easily in over 35 meters radius across the access point. However I don't get any documentation to know exact propagation distance.
Could someone please share their experiences as to what is the ideal distance of signal coverage that could be covered by a typical Cisco outdoor access point? I do not want to go for over quoting as that might result from the client opting for other vendor's product. I would thus want to go with most appropriate plan.
Also apart from 11ac capability and multiple spatial streams, does 1570 AP have any other major improvement as well our its predecessor 1552E series AP.
Please share your expereinces.
Best Regards,
Muhammed Adnan

Factors Affecting Wireless Networking Performance
There are many factors that affect your Wireless Networking Performance that are dependent on various areas within the network itself from the technology of the devices used, the local environment the signals will travel through, the fundamental physics behind wireless transmission and more. Some of these cannot be avoided and measures must be taken to try to minimise the negative affect that these factors will have on the network performance but others can be resolved completely either though equipment upgrading or good network planning.
There are some well known factors that affect Wireless Networking performance that most people will identify easily but that does not lessen their importance when considering network planning, these are:
Obvious Factors Affecting Wireless Networking Performance
    Physical Obstructions
    Network Range & Distance between Devices
    Wireless Network Interference
    Signal Sharing
Quite Well Known Factors Affecting Wireless Networking Performance
    Network Usage & Load
    Poorly Deployed Antennas
    Local Environment Characteristics
    Spectrum Channel Limitations
    Signal Reflection
    Wireless Signal Restriction
Lesser Known Factors Affecting Wireless Networking Performance
    Transmitter Power Limitations
    Backwards Compatibility with Older Standards
    Polarisation of Signal
    Speed Loss Due to Wireless Overheads
    Lowering Performance to Stay Connected

Cisco Aironet 1240 AG Access Point - configure Mac Address using Telnet

Hi there,
IÂve got a problem hopefully someone can help me with. I have the above mentioned AP and it is configured, working well and providing wireless access to several laptops on our domain.
The thing is I canÂt get access to the web-based interface to add new laptops Mac addresses to the AP as I currently have them secured with local list Mac address authentication but my user name and password when entered in the web browser login dialog box wonÂt allow me in although strangely it does allow me to login using the same credentials when I telnet into the AP.
Does anyone know why I canÂt get logged in using the web interface even though the user name and password does appear to be correct as I can telnet in? Also if you have any suggestions how I could sort this without having to perform the password recovery procedure, as I donÂt want all the config on the AP wiped and want to avoid having the set the whole thing up again.
As I workaround if anyone knows what the commands are to allow me to add the Mac addresses of the new laptops so they are added to the local list Mac address authentication list so the new laptops are secured that would be great.
Thanks in anticipation,
Tony

Your AP is probably configured to use the enable secret as the password. Try entering nothing for the username, and enter your enable secret for the password ('Cisco' by default).
If that doesn't work, post your running-config and we'll be able to see why it's doing that. It's a standard configuration, and no worries because wiping the AP won't be necessary since you can successfully Telnet in.
Jeff

Cisco aironet 1200 Series access point dropping clients

We are having an issue where our Cisco Aironet 1220 Series AP is constantly dropping clients. We have 3 APs mounted on a single tower, all out of each others range and freq. There are approximatly 30 clients on each AP. We are noticing an increase in dropped customers (up to 20 at a time). ANy suggestions? This only became an issue in the last few weeks, and nothing major has changed.

Hi
Even I was facing almost the same kind of problem. But in my case it was wired clients to the workgroup bridge 350.
I had done lot of testings and reading at that time to resolve this problem.
However in your case I feel your problem can be resolved by keeping the option "Reliable multicast for Workgroup bridges" disabled in the APs under dot11radio interface settings. This is possibly because the radios cannot associate to more than 20 clients at a time if the option is in the enable mode.
You need to keep this option enabled in a root bridge when you have problems of dropping the wired clients to the workgroup bridge.
By keeping this option enabled, you are actually asking the Root bridges to consider the Workgroup bridges as Infrastructure devices and not as clients thereby making the roots to send all the multicasts to the WGBs. However in that case it losses the efficiency of associating more than 20 clients.
Let me know if this resolves your problem.
Regards

AIR-CAP1602E-N-K9 access point

hi,
can any one help me to configure AIR-CAP1602E-N-K9 as standalone acess point.
its a new one with default setting as per my knowledege its a controller based access point so pls help how to convert into standalone access point and which image is compatible with that.

Converting a Lightweight Access Point Back to Autonomous Mode
You can convert an access point from lightweight mode back to autonomous mode by loading a Cisco IOS Release that supports autonomous mode (Cisco IOS release 12.3(7)JA or earlier). If the access point is associated to a controller, you can use the controller to load the Cisco IOS release. If the access point is not associated to a controller, you can load the Cisco IOS release using TFTP.
Note In some LWAPP deployments, the LWAPP controller resides between the access points and the rest of the network. In this topology, all traffic must cross over the controller before communication with network resources, such as a TFTP server, can occur. When converting back to non-LWAPP IOS with an access point that is no longer using the LWAPP protocol, traffic does not cross over the controller to reach the TFTP server.
Note The lightweight 1300 series access points can only be converted back to autonomous mode using a wireless LAN controller.
Using a Wireless LAN Controller to Return to a Previous Release
Follow these steps to revert from LWAPP mode to autonomous mode using a wireless LAN controller:
Step 1 Log into the CLI on the controller to which the access point is associated.
Step 2 Enter this command:
config ap tftp-downgrade tftp-server-ip-address filename access-point-name
Using a TFTP Server to Return to a Previous Release
Note This section does not apply to Cisco C3201WMIC and Cisco C3201LAP.
Follow these steps to revert from LWAPP mode to autonomous mode by loading a Cisco IOS release using a TFTP server:
Step 1 The static IP address of the PC on which your TFTP server software runs should be between 10.0.0.2 and 10.0.0.30.
Step 2 Make sure that the PC contains the access point image file (such as c1200-k9w7-tar.122-15.JA.tar for a 1200 series access point) in the TFTP server folder and that the TFTP server is activated.
Step 3 Set the timeout value on the TFTP server to 30 seconds.
Step 4 On the PC where the TFTP server is located, perform these steps:
a. Disable any software firewall products, such as Windows firewall, ZoneAlarm firewall, McAffee firewall, or others.
b. Ensure all Windows files are visible. From Windows Explorer, click Tools > Folder Options > View; then uncheck the Hide extensions for known file types check box.
Step 5 Rename the access point image file in the TFTP server folder to c1200-k9w7-tar.default for a 1200 series access point, c1130-k9w7-tar.default for an 1130 series access point, c1240-k9w7-tar.default for a 1240 series access point, and c1250-k9w7-tar.default for a 1250 series access point.
Step 6 Connect the PC to the access point using a Category 5 (CAT5) Ethernet cable.
Step 7 Disconnect power from the access point.
Step 8 Press and hold MODE while you reconnect power to the access point.
Step 9 Hold the MODE button until the status LED turns red (approximately 20 to 30 seconds) and then release.
Step 10 Wait until the access point reboots, as indicated by all LEDs turning green followed by the Status LED blinking green.
Step 11 After the access point reboots, reconfigure it using the GUI or the CLI.

Cisco 802.11n Outdoor Access Point

I have to propose to a client a 802.11n outdoor Acess point with external antenna, tha gain must be >8 dbi.
Which cisco model should i use ?

I have to propose to a client a 802.11n outdoor Acess point with external antenna, tha gain must be >8 dbi.
DO NOT, under any circumstances, use 1260 or 3500e if you plan to use antennas > 6 dBi. These two models DO NOT SUPPORT antenna gain higher than 6 dBi. The only two 802.11n-capable WAP that can support high-gain antenna of > 6 dBi are the 1250 and the 3500p.
Antenna Product Portfolio for Cisco Aironet 802.11n Access Points
The 1250 is End-of-Sale (End-of-Sale Date: 12 January 2012) and requires 20.0w of PoE. The 1250 can support antenna gain > 6 dBi.
The 3500p was released around mid-2011 because people were howling/screaming about the lack of high-gain antenna support, thus the 3500p was developed alongside the AIR-ANT25137NP-R.
Cisco recommends that the installation of the AIR-ANT25137NP-R should be done with proper sight-survey.
[Sorry Scott. Didn't want to be rude. ]

Is Cisco air-ap1230a a lightweight access point?

Is Cisco air-ap1230a a lightweight access point? Can it be use for the new CCNP training?
Thanks

Hi Bao,
The 1230 is not a Lightweight AP, but can be upgraded to LWAPP with the A Radio model listed below (Note that this model is EOS/EOL) this is probably not the best choice for your studies;
Solution Requirements
Migration from autonomous access point mode to lightweight mode is possible on these Cisco Aironet access point platforms:
All 1130AG access points
All 1240 AG access points
For all IOS-based 1200 series modular access point (1200/1220 Cisco IOS Software Upgrade, 1210 and **1230 AP**) platforms, it depends on the radio:
if 802.11G, MP21G and MP31G are supported
if 802.11A, RM21A and RM22A are supported
The 1200 series access points can be upgraded with any combination of supported radios: G only, A only, or both G and A.
All 1310 AG access points
From this good doc;
http://www.cisco.com/en/US/products/hw/wireless/ps430/prod_technical_reference09186a00804fc3dc.html
Cisco Aironet 1200 Series Access Point Ordering Guide
http://www.cisco.com/en/US/products/hw/wireless/ps430/prod_technical_reference09186a00800c9435.html
EOS & EOL for the Cisco Aironet 1200 Series 802.11a Access Points
http://www.cisco.com/en/US/products/hw/wireless/ps430/prod_eol_notice0900aecd801e5303.html
Understanding the Lightweight Access Point Protocol (LWAPP)
http://www.cisco.com/en/US/netsol/ns340/ns394/ns348/ns337/networking_solutions_white_paper0900aecd802c18ee.shtml
Lightweight Access Point FAQ
http://www.cisco.com/en/US/products/ps6306/products_qanda_item09186a00806a4da3.shtml
Lightweight AP (LAP) Registration to a Wireless LAN Controller (WLC)
http://www.cisco.com/en/US/tech/tk722/tk809/technologies_tech_note09186a00806c9e51.shtml
**You are probably better off with something like the LAP 1131. Have a look here;
http://www.cisco.com/en/US/products/hw/wireless/products_category_buyers_guide.html#access_points
Hope this helps! I noticed your other post regarding the WLC suggestions and have responded there as well :)
Rob

Wireless bridging is not working in 1552 outdoor access point and 2602e indoor access point.

Hi,
I am have been tested wireless bridging with 2 indoor Cisco 2602 access point by following the attached document and its working fine without any issue.
After then I made one Cisco 1552 EU-M-K9 outdoor access point as RAP, then connect to this RAP with one 2602 mesh access point. But its not working, mesh access point is just start scan the signal to get associate with RAP, but not getting established. Is there any specific configuration required to connect between outdoor and indoor access point. Kindly find the attachment and advise.
regards,
Jubair.S

Hi Team,
Any suggestion??
Regards,
Jubair.S

Cisco's Options For A Ruggedized Access Point

I'm looking for a wireless solution for an open plant environment. I know Cisco sold ruggedized 350 access points. I also see they are discontinuing the 350. What is Cisco's ruggedized solution currently for 802.11b/g?

I beleive the 1200 were for outdoor but you may want to use a NEMA enclosure for the 1200. check out fabcorp and ydi for info and prices.

Cisco Outdoor Controller Based Access Point

Similar Messages

Maybe you are looking for