Cisco WS-C4948 missing qos commands
Hi all,
I've hunted high and low and cannot seem to be able to enable shaping, bandwidth or priority under a class in a policy-map on a Cisco WS-C4948.
All documentation I have read on this switch on the Cisco website says that all these commands are possible.
Example : http://www.cisco.com/en/US/docs/switches/lan/catalyst4500/12.2/50sg/configuration/guide/qos.html#wp1436874
Switch# configure terminal
Switch(config)# policy-map policy1
Switch(config-pmap)# class class1
Switch(config-pmap-c)# shape average 256000
When I try to replicate I get:
Switch# configure terminal
Switch(config)# policy-map policy1
Switch(config-pmap)# class class1
Switch(config-pmap)# ?
Policy-map class configuration commands:
dbl Dynamic buffer limiting
exit Exit from QoS class action configuration mode
netflow-sampler NetFlow action
no Negate or set default values of a command
police Police traffic matching current class
service-policy Configure QoS Service Policy
set Set QoS values
trust Set trust value for the class
<cr>
Am I missing a global command to enable shaping?
Thanks guys.
Hi Leo,
Cisco IOS Software, Catalyst 4500 L3 Switch Software (cat4500-ENTSERVICESK9-M), Version 12.2(54)SG1, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2011 by Cisco Systems, Inc.
Compiled Thu 27-Jan-11 11:39 by prod_rel_team
Image text-base: 0x10000000, data-base: 0x123FB194
ROM: 12.2(31r)SGA7
Dagobah Revision 226, Swamp Revision 5
Switch uptime is 3 days, 19 hours, 59 minutes
System returned to ROM by power-on
System restarted at 19:06:24 AEST Thu Nov 28 2013
System image file is "bootflash:cat4500-entservicesk9-mz.122-54.SG1.bin"
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
[email protected]
cisco WS-C4948 (MPC8245) processor (revision 0) with 262144K bytes of memory.
Processor board ID FOX1205G7TQ
MPC8245 CPU at 266Mhz, Fixed Module
Last reset from PowerUp
3 Virtual Ethernet interfaces
48 Gigabit Ethernet interfaces
511K bytes of non-volatile configuration memory.
Configuration register is 0x2102
Thanks
Similar Messages
-
Convert Qos commands from CATOS to IOS
Hello,
i've some problems converting some Qos commands from CATos to IOS can anybody help me?
set qos drop-threshold 1q4t rx queue 1 50 60 80 100
set qos map 2q2t tx 1 1 cos 0
set qos map 1p1q4t rx 1 3 cos 4
set qos wrr 1p2q2t 50 255
set qos txq-ratio 1p2q2t 70 15 15
set qos wred 1p2q2t tx queue 1 70:100 70:100
set qos bridged-microflow-policing disable 1,50-54,100-121,500,700-702,1006-1011,1016
set qos policed-dscp-map 1:1
set qos policed-dscp-map excess-rate 0:0
set qos acl default-action ip dscp 0
set qos acl default-action ipx
set qos acl default-action mac
set qos policy-source local
set qos rsvp disable
set qos rsvp policy-timeout 30
set qos rsvp local-policy forward
!Module with GE interfaces
set port qos 3/1-16 cos 0
set port qos 3/1-16 trust trust-cos
set port qos 3/1-16 port-based
set port qos 3/1-16 policy-source local
set qos statistics export port 3/1 disable
set qos statistics export port 3/2 disable
set qos statistics export port 3/3 disable
set qos statistics export port 3/4 disable
set qos statistics export port 3/5 disable
set qos statistics export port 3/6 disable
set qos statistics export port 3/7 disable
set qos statistics export port 3/8 disable
set qos statistics export port 3/9 disable
set qos statistics export port 3/10 disable
set qos statistics export port 3/11 disable
set qos statistics export port 3/12 disable
set qos statistics export port 3/13 disable
set qos statistics export port 3/14 disable
set qos statistics export port 3/15 disable
set qos statistics export port 3/16 disableThis URL should help you:
http://www.cisco.com/warp/public/473/73.html -
MLS QOS commands not accepted on 3800...what's the alternative?
ging from 3750 to 3800, MLS QOS commands not accepted on 3800...I'd heard that this command was deprecated, how do we translate our QoS statements onto the new platform?
To clarify, our 3750 mls qos statements are as follows:
mls qos map cos-dscp 0 8 16 26 32 46 48 56
mls qos srr-queue input bandwidth 90 10
mls qos srr-queue input threshold 1 8 16
mls qos srr-queue input threshold 2 34 66
mls qos srr-queue input buffers 67 33
mls qos srr-queue input cos-map queue 1 threshold 2 1
mls qos srr-queue input cos-map queue 1 threshold 3 0
mls qos srr-queue input cos-map queue 2 threshold 1 2
mls qos srr-queue input cos-map queue 2 threshold 2 4 6 7
mls qos srr-queue input cos-map queue 2 threshold 3 3 5
mls qos srr-queue input dscp-map queue 1 threshold 2 9 10 11 12 13 14 15
mls qos srr-queue input dscp-map queue 1 threshold 3 0 1 2 3 4 5 6 7
mls qos srr-queue input dscp-map queue 1 threshold 3 32
mls qos srr-queue input dscp-map queue 2 threshold 1 16 17 18 19 20 21 22 23
mls qos srr-queue input dscp-map queue 2 threshold 2 33 34 35 36 37 38 39 48
mls qos srr-queue input dscp-map queue 2 threshold 2 49 50 51 52 53 54 55 56
mls qos srr-queue input dscp-map queue 2 threshold 2 57 58 59 60 61 62 63
mls qos srr-queue input dscp-map queue 2 threshold 3 24 25 26 27 28 29 30 31
mls qos srr-queue input dscp-map queue 2 threshold 3 40 41 42 43 44 45 46 47
mls qos srr-queue output cos-map queue 1 threshold 3 5
mls qos srr-queue output cos-map queue 2 threshold 3 3 6 7
mls qos srr-queue output cos-map queue 3 threshold 3 2 4
mls qos srr-queue output cos-map queue 4 threshold 2 1
mls qos srr-queue output cos-map queue 4 threshold 3 0
mls qos srr-queue output dscp-map queue 1 threshold 3 40 41 42 43 44 45 46 47
mls qos srr-queue output dscp-map queue 2 threshold 3 24 25 26 27 28 29 30 31
mls qos srr-queue output dscp-map queue 2 threshold 3 48 49 50 51 52 53 54 55
mls qos srr-queue output dscp-map queue 2 threshold 3 56 57 58 59 60 61 62 63
mls qos srr-queue output dscp-map queue 3 threshold 3 16 17 18 19 20 21 22 23
mls qos srr-queue output dscp-map queue 3 threshold 3 32 33 34 35 36 37 38 39
mls qos srr-queue output dscp-map queue 4 threshold 1 8
mls qos srr-queue output dscp-map queue 4 threshold 2 9 10 11 12 13 14 15
mls qos srr-queue output dscp-map queue 4 threshold 3 0 1 2 3 4 5 6 7
mls qos queue-set output 1 threshold 1 138 138 92 138
mls qos queue-set output 1 threshold 2 138 138 92 400
mls qos queue-set output 1 threshold 3 36 77 100 318
mls qos queue-set output 1 threshold 4 20 50 67 400
mls qos queue-set output 2 threshold 1 149 149 100 149
mls qos queue-set output 2 threshold 2 118 118 100 235
mls qos queue-set output 2 threshold 3 41 68 100 272
mls qos queue-set output 2 threshold 4 42 72 100 242
mls qos queue-set output 1 buffers 10 10 26 54
mls qos queue-set output 2 buffers 16 6 17 61
mls qos
What would all this translate to on the 3800 platform? -
Which version of IOS is required on Cisco 3640 to have Xconnect command?
Hi,
I want to to configure layer2 circuits on Cisco 3640 , If anybody can let me knowWhich version of IOS is required on Cisco 3640 to have Xconnect command?Hi Harold,
I have a home lab having Cisco 3640, Cisco 2610 and Juniper J2320. I want to configure Layer-2 VPN/EoMPLS between Juniper J2320 and Cisco device.
Could you please guide me on these 2 below mentioned questions.
1) Does Cisco 2610 supports Layer-2/EoMPLS with any IOS. If so what IOS should I have to support Layer-2/EoMPLS on 2610.
2)Can you please confirm me that Cisco 2801 with IOS c2801-spservicesk9-mz.124-15.T9 will support Layer2/EoMPLS ?
While researching on this I cam to know that only 2801 with IOS c2801-spservicesk9-mz.124-15.T9 can support this , but not sure , need your guidance.
Based on your answer I will buy Cisco router 2801 for my Layer-2/EoMPLS setup.
Regards
Ranjeet -
Missing "config" command in CLI (Cisco 1140 AP)
Hi All
I am trying to chang IP configuraton for my Cisco 1140 AP, but in CLI I dont have a "config" command (i used en before to enable administrative mode)
Bellow are the commands I can see:
AP7081.0506.d54a#?
Exec commands:
cd Change current directory
clear Reset functions
clock Manage the system clock
crypto Encryption related commands.
debug Debugging functions (see also 'undebug')
delete Delete a file
dir List files on a filesystem
disable Turn off privileged commands
enable Turn on privileged commands
exit Exit from the EXEC
fsck Fsck a filesystem
help Description of the interactive help system
led LED functions
lock Lock the terminal
login Log in as a particular user
logout Exit from the EXEC
lwapp lwapp exec commands
mkdir Create new directory
monitor Monitoring different system events
more Display the contents of a file
name-connection Name an existing network connection
no Disable debugging functions
ping Send echo messages
pwd Display current working directory
release Release a resource
reload Halt and perform a cold restart
rename Rename a file
renew Renew a resource
rmdir Remove existing directory
send Send a message to other tty lines
set Set system parameter (not config)
show Show running system information
systat Display information about terminal lines
terminal Set terminal line parameters
test Test subsystems, memory, and interfaces
traceroute Trace route to destination
undebug Disable debugging functions (see also 'debug')
upgrade Upgrade software
verify Verify a file
where List active connections
In addition, I am keep getting the following messages:
*Mar 1 00:38:13.933: %CAPWAP-3-ERRORLOG: Not sending discovery request AP does not have an Ip !!
*Mar 1 00:38:23.883: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0, changed state to up
I am not sure what I am doing wrong. I try to do a hard reset but it didnt work.
Any ideas?Thanks
Another queastion:
I verified that my AP is Lightweight by the part id (AIR-LAP1141N)
Now, when I browse to Cisco download page, I have 3 options for OS:
- Autonomous AP IOS Software
- IOS Boot Images
- IOS Software
- Lightweight AP IOS Software
Which of the above should I use in order to switch the AP to regular mode?
Does anyone knows what is the difference between IOS software and the Autonomous IOS software? -
Hi,
I am unable to add the "service-policy output QOS" on a vlan interface on cisco 3925 router.
(Version 15.0(1r)M13, RELEASE SOFTWARE (fc1))
Was able to add the command on the vlan interface for our other cisco 3925 router with a different version.
(Version 15.0(1r)M16, RELEASE SOFTWARE (fc1))
Though the version is slightly different I don't think that is the reason.
Any thoughts?Rajeevsh,
Please look below. When I apply the policy on the interface it gives a 'Configuration failed!' message.
class-map match-any CAsip
match protocol sip
match protocol rtcp
match protocol rtp
match protocol rtsp
policy-map QOS
class CAsip
priority percent 65
set dscp ef -
Sup2T ##show platform qos ## command
Hi everyone,
The white paper about sup2t System Architecture
http://www.cisco.com/en/US/prod/collateral/switches/ps5718/ps708/white_paper_c11-652042.html#wp9000594
says:
By default, packets are passed through without a change in DSCP, EXP, or CoS for L2 packets or L2-classified L3 packets
However, when I see the output of the command "show platform qos" there are " CoS Changes"
----- Switch [1], Module [1] -----
Counter IFE Pkts IFE Bytes OFE Pkts OFE Bytes
Policing Drops 0 0 0 0
Policing Forwards 1136306595 26171591950357 1150627829 26173991946454
Police-hi Actions (Lvl3) 0 0 0 0
Police-lo Actions (Lvl2) 0 0 0 0
Aggregate Drops 0 0 0 0
Aggregate Forwards 1136306593 26171591950221 1150627827 26173991946318
Aggregate Exceeds-Hi 0 0 0 0
Aggregate Exceeds-Lo 0 0 0 0
NF Drops 0 0 0 0
NF Forwards 2 136 2 136
NF Exceeds 0 0 0 0
TOS Changes 1
TC Changes 0
EXP Changes 0
COS Changes 949932
Tunnel Decaps 1
Tunnel Encaps 1
1. ¿Why there are cos changes?
2. ¿What are Policing Forwards and Aggregate Forwards?
I have two C6500E (Sup2T Supervisor) in VSS mode and my config is quite similar to defaults.
auto qos default
table-map cos-discard-class-map
map from 5 to 46
interface Port-channel10
switchport
platform qos trust cos
interface GigabitEthernet1/1/6
switchport
platform qos trust cos
channel-group 10 mode active
3. ¿Could it be related to CoPP?
Thank you in advance.The outputs of sh platform commands are not intuitive and one will need a detailed architecture knowledge including code names to decipher them. No current plans on documenting all the commands. Most needed commands are sort of documented in troubleshooting documents. Example, is the following high cpu document
http://www.cisco.com/warp/public/473/cat4500_high_cpu.html -
CATOS QOS commands - what are they in IOS?
I have the following commands in CATOS on a 6500 but I need to know what they should be in IOS 12.2(17d)SXB10?
set qos enable
set qos cos-dscp-map 0 8 16 24 32 46 50 56
set qos map 2q2t tx 2 2 cos 5
set qos acl ip TRUST-DSCP trust-dscp any
commit qos acl TRUST-DSCP
set qos acl map TRUST-DSCP 8/1-48
Please can someone help???!!set qos enable
Router(config)# mls qos
!!set qos cos-dscp-map 0 8 16 24 32 46 50 56
Router(config)# mls qos map cos-dscp
!!set qos map 2q2t tx 2 2 cos 5
Router(config)# interface gigabitethernet 1/1
Router(config-if)# rcv-queue cos-map queue_# threshold_# cos1 [cos2 [cos3 [cos4 [cos5 [cos6 [cos7 [cos8]]]]]]]
Router(config)# interface gigabitethernet 1/1
Router(config-if)# wrr-queue cos-map 1 1 0 1
!!set qos acl ip TRUST-DSCP trust-dscp any
!!commit qos acl TRUST-DSCP
!!set qos acl map TRUST-DSCP 8/1-48
Router(config)# class-map class_name
Router(config-cmap)# match access-group name acl_index_or_name
Router(config)# policy-map policy_name
Router(config-pmap)# class class_name
Router(config-pmap-c)# trust dscp
Router(config)# interface fastethernet 1/1
Router(config-if)# service-policy [input | output] policy_map_name
I believe this is right. If you need further clarification please ask or refer to
http://www.cisco.com/en/US/products/hw/switches/ps708/products_configuration_guide_chapter09186a00801679f8.html -
Missing setipmm command under listenerconfig
Team,
I have been trying to test the mail merge feature on test environment and somehow I can not find a way to execute setipmm command on CLI. As per the user guide 8-5-6, Use the setipmm subcommand of listerconfig to enable the IPMM on the listener.
When I execute listerconfig command I see 4 options 1) NEW 2) EDIT 3) SETUP 4) DELETE and cli won't allow to execute setipmm command under any sub options. Any clue as to what am I missing?
Thanks,
SJ10.6.8
CS6
Essential or Advanced
I ended up uninstalling, restarting, reinstalling from the cloud.
I was missing the plugins.
I think I've resolved the issue. -
Hello Experts,
I am configuring IM&P 10.5 and I need to enable essential services in IM&P Serviceability --> Tools --> Control Center - Feature Services but Cisco Sync Agent is missing. Is there something I need to do to get this activated? I don't see it in Service Activation either. I have attached the snips of the GUI.
What am I missing?
Thanks,
Randy C.Nevermind, I found it under Control Center - Network Services. Not sure why documentation states that it's in Feature Services.
-
Cisco ACE module missing licence file - no connectivity
Hi,
We have 2 ACE modules that were delivered without any licenses.
There is no IP connectivity whatsoever to these modules and I'm guessing this is due to the fact there are no licenses installed.
Have tried asking Cisco to no avail - and am not sure if there is an actual problem with them or not.
The VLANs are assigned correctly and I can see inbound ICMP echo from the 6509 that its hosted in, but no outbound packets ever leave the ACE. I've applied a mgmt policy to enable ping/telnet/ssh etc.
switch/Admin# sh vlans
Vlans configured on SUP for this module
vlan4 vlan30-31 vlan160 vlan180-195 vlan360 vlan380-395 vlan560 vlan580-
595 vlan760 vlan780-795
switch/Admin# sh ip int bri
Interface IP-Address Status Protocol
vlan4 10.119.127.196 up up
vlan30 10.119.127.241 up up
vlan31 10.119.127.245 up up
interface vlan 4
description ACE Mgmt interface for Admin Context
ip address 10.119.127.196 255.255.255.224
service-policy input REMOTE_MGMT
no shutdown
vlan4 is up
Hardware type is VLAN
MAC address is 00:1f:ca:7b:6f:33
Mode : routed
IP address is 10.119.127.196 netmask is 255.255.255.224
FT status is non-redundant
Description:ACE Mgmt interface for Admin Context
MTU: 1500 bytes
Last cleared: never
Alias IP address not set
Peer IP address not set
Assigned from the Supervisor, up on Supervisor
Config download failures : 1
2980 unicast packets input, 16363862 bytes
240857 multicast, 3026 broadcast
0 input errors, 0 unknown, 0 ignored, 0 unicast RPF drops
0 unicast packets output, 187712 bytes
0 multicast, 2933 broadcast
0 output errors, 0 ignored
switch/Admin# sh arp
Context Admin
================================================================================
IP ADDRESS MAC-ADDRESS Interface Type Encap NextArp(s) Status
================================================================================
10.119.127.193 00.00.00.00.00.00 vlan4 GATEWAY - * 3 req dn
10.119.127.196 00.1f.ca.7b.6f.33 vlan4 INTERFACE LOCAL _ up
10.119.127.245 00.1f.ca.7b.6f.33 vlan31 INTERFACE LOCAL _ up
10.119.127.241 00.1f.ca.7b.6f.33 vlan30 INTERFACE LOCAL _ up
================================================================================
Total arp entries 4
The ARP table for the adjacent switch SVI has a valid MAC upon reboot, but soon after resets to 00.00.00.00.00.00
Problem is that once Cisco eventually send me the license file I have no way of TFTP'ing it to the ACE module.
Any suggestions/advice?Thanks for the info - so I should at least be able to connect to a license-less ACE at least, but these modules seem to have a problem.
If the modules are reloaded (from the ACE) or reset (from the Supervisor) they initially have the ARP entry (however still cannot communicate to the attached Supervisor via SVI) which eventually resets.
Info as requested:
switch/Admin# sh resource usage
Allocation
Resource Current Peak Min Max Denied
Context: Admin
conc-connections 9 9 0 0 0
mgmt-connections 0 0 0 0 0
proxy-connections 0 0 0 0 0
xlates 0 0 0 0 0
bandwidth 0 76 0 125000000 296849008
throughput 0 76 0 0 296849008
mgmt-traffic rate 0 0 0 125000000 0
connection rate 0 2 0 0 15
ssl-connections rate 0 0 0 0 0
mac-miss rate 0 0 0 0 0
inspect-conn rate 0 0 0 0 0
acl-memory 0 6336 0 0 11
sticky 0 0 0 0 0
regexp 0 0 0 0 0
syslog buffer 0 0 0 0 0
syslog rate 0 0 0 0 24
Context: APPLICATION
conc-connections 0 0 2000000 0 0
mgmt-connections 0 0 25000 0 0
proxy-connections 0 0 262144 0 0
xlates 0 0 262144 0 0
bandwidth 0 0 125000000 125000000 0
throughput 0 0 125000000 0 0
mgmt-traffic rate 0 0 0 125000000 0
connection rate 0 0 250000 0 0
ssl-connections rate 0 0 250 0 0
mac-miss rate 0 0 500 0 0
inspect-conn rate 0 0 1500 0 0
acl-memory 0 0 19650480 0 0
sticky 0 0 419430 0 0
regexp 0 0 262144 0 0
syslog buffer 0 0 1048576 0 0
syslog rate 0 0 25000 0 0
Context: BACK_END
conc-connections 0 0 2000000 0 0
mgmt-connections 0 0 25000 0 0
proxy-connections 0 0 262144 0 0
xlates 0 0 262144 0 0
bandwidth 0 0 125000000 125000000 0
throughput 0 0 125000000 0 0
mgmt-traffic rate 0 0 0 125000000 0
connection rate 0 0 250000 0 0
ssl-connections rate 0 0 250 0 0
mac-miss rate 0 0 500 0 0
inspect-conn rate 0 0 1500 0 0
acl-memory 0 0 19650480 0 0
sticky 0 0 419430 0 0
regexp 0 0 262144 0 0
syslog buffer 0 0 1048576 0 0
syslog rate 0 0 25000 0 0
Context: FRONT_END
conc-connections 0 0 2000000 0 0
mgmt-connections 0 0 25000 0 0
proxy-connections 0 0 262144 0 0
xlates 0 0 262144 0 0
bandwidth 0 0 125000000 125000000 0
throughput 0 0 125000000 0 0
mgmt-traffic rate 0 0 0 125000000 0
connection rate 0 0 250000 0 0
ssl-connections rate 0 0 250 0 0
mac-miss rate 0 0 500 0 0
inspect-conn rate 0 0 1500 0 0
acl-memory 0 0 19650480 0 0
sticky 0 0 419430 0 0
regexp 0 0 262144 0 0
syslog buffer 0 0 1048576 0 0
syslog rate 0 0 25000 0 0
Context: TEST_DEV
conc-connections 0 0 2000000 0 0
mgmt-connections 0 0 25000 0 0
proxy-connections 0 0 262144 0 0
xlates 0 0 262144 0 0
bandwidth 0 0 125000000 125000000 0
throughput 0 0 125000000 0 0
mgmt-traffic rate 0 0 0 125000000 0
connection rate 0 0 250000 0 0
ssl-connections rate 0 0 250 0 0
mac-miss rate 0 0 500 0 0
inspect-conn rate 0 0 1500 0 0
acl-memory 0 0 19650480 0 0
sticky 0 0 419430 0 0
regexp 0 0 262144 0 0
syslog buffer 0 0 1048576 0 0
syslog rate 0 0 25000 0 0
switch/Admin# sh cde health
CDE BRCM INTERFACE
======================
Packets received 3357
Packets transmitted 12
Broadcom interface CRC error count 0
BRCM VOQ status [empty] [not full]
BRCM pull status [pulling]
CDE HYPERION INTERFACE
======================
Packets received 7668407
Packets transmitted 967915
Short packets drop count 0
Fifo Full drop count 0
Protocol error drop count 0
FCS error drop count 0
CRC error drop count 0
Num times flow control triggered on hyp interface 0
Num self generated multicast packets filtered 967915
HYP IXP0 VOQ status [empty] [not full]
HYP IXP1 VOQ status [empty] [not full]
HYP SLOW VOQ status [empty] [not full]
HYP tx pull status [pulling]
CDE IXP0 INTERFACE
======================
Packets received 964680
Packets transmitted 6581196
Num bad pkts recvd on fast spi channel0 0
Num bad pkts recvd on slow spi channel8 0
Num bad pkts recvd on fast spi channel2 0
Num bad pkts recvd on slow spi channel4 0
IXP0 Fast VOQ status [empty] [not full]
IXP0 BRCM VOQ status [empty] [not full]
IXP0 pull status [pulling]
IXP0 spi src status [healthy]
IXP0 spi snk status [healthy]
CDE1 SWITCH1 INTERFACE
======================
Packets received (hyp, ixp0) 3241
Packets received (bcm) 6
Packets received (daughter card 0) 0
Packets received (daughter card 1) 0
Packets Errors received (hyp, ixp0) 0
Packets Errors received (bcm) 0
Packets Errors received (daughter card 0) 0
Packets Errors received (daughter card 1) 0
Packets transmitted (ixp1) 122653
Packets transmitted (nitrox) 0
Packets Errors transmitted (ixp1) 0
Packets Errors transmitted (nitrox) 0
CDE2 SWITCH2 INTERFACE
======================
Packets received (ixp1) 122653
Packets received (nitrox) 0
Packets Errors received (ixp1) 0
Packets Errors received (nitrox) 0
Packets transmitted (hyp, ixp0) 3241
Packets transmitted (broadcom) 6
Packets transmitted (daughter card 0) 0
Packets transmitted (daughter card 1) 0
Packets Errors transmitted (ixp1) 0
Packets Errors transmitted (nitrox) 0
Packets Errors transmitted (daughter card 0) 0
Packets Errors transmitted (daughter card 1) 0
CDE IXP1 INTERFACE
======================
Packets received 3247
Packets transmitted 122653
Num bad pkts recvd on fast spi channel0 0
Num bad pkts recvd on slow spi channel8 0
Num bad pkts recvd on fast spi channel2 0
Num bad pkts recvd on slow spi channel4 0
IXP1 Fast VOQ status [empty] [not full]
IXP1 BRCM VOQ status [empty] [not full]
IXP1 pull status [pulling]
IXP1 spi src status [healthy]
IXP1 spi snk status [healthy]
CDE NITROX INTERFACE
======================
Packets received 0
Packets transmitted 0
Num bad pkts recvd on fast spi channel0 0
Num bad pkts recvd on slow spi channel8 0
Num bad pkts recvd on fast spi channel2 0
Num bad pkts recvd on slow spi channel4 0
NTX Fast VOQ status [empty] [not full]
NTX BRCM VOQ status [empty] [not full]
NTX pull status [pulling]
NTX spi src status [healthy]
NTX spi snk status [healthy]
== Backplane ==
ITASCA_SYS_CNTL1 0x300 data 0x61f0000
ITASCA_SYS_CNTL2 0x304 data 0x80630000 -
Cisco ASA sla and track commands
Cisco ASA 5520's running 8.2.5 and using sla and track commands
Am I right in thinking that sla and track can be used for any pair of routes using diverse routes between 2 locations, these commands are NOT just restricted to being sued for a default route?
Example: I have 2 MPLS carriers between the 2 sites, the networks advertised by the MPLS carriers would be idnetical
e.g.Site A has
route outside 172.16.0.0 255.255.0.0 2.2.2.2 1 track 1
route outside 172.16.0.0 255.255.0.0 3.3.3.3 128
There would of course be the track 1 rtr...command and some corresponding sla commandsMatthew
Am I right in thinking that sla and track can be used for any pair of routes
As far as I know, yes, they don't need to be default routes, it's just that they usually are.
I would have thought if both routes are pointing via the outside interface though the next hop IPs would be in the same subnet ?
Jon -
Cisco UCS PSU issues - CLI commands?
I have a few C200s that are showing one power supoply as "dead" put they are present in the inventory. Currently my power policies are still the default and I am wondering how to tell or see a log or graph of power coming into the PSU.
Also is there a way to modify the power state via CLI?Hello Eddie,
What is the version of CIMC ? Do you notice any fault logged for it ? What is the LED status of those PSUs ?
The stats can be viewed via CLI / GUI but it does not provide output over the time in a graph format.
In GUI, PSU information and stats are availabe under
Server > Inventory > Power Supplies
Server > Power Policies
Please refer following doc for related CLI commands
http://www.cisco.com/en/US/docs/unified_computing/ucs/c/sw/cli/config/guide/1.4.1/Cisco_UCS_C-Series_CLI_Configuration_Guide_141_chapter3.html
Padma -
Missing menu commands in Itunes 6
Ever since I downloaded Itunes 6, I am missing certain menu commands like "File," the ability to create playlists or enter/change track information.
Anybody else have similar problems? I am at a loss as far as what to do...
Thanks!
LyndaSomehow the titlebar became skinned. I just left-clicked the titlebar area, selected options, and unchecked skin the titlebar... Can't believe I spent hours trying to figure that out.
-
Missing image command line utility help
Hi all,
I can't seem to find the name of the utility (command line) that is very similar to ImageMagick. I know it's there because I used it before. It lets you manipulate images in various ways including resizing, changing the format, the colorspace tetc. I'm prety sure it'll even let you insert text on top of the image and save as xxx. I'm not a total geek ( I wish I was sometimes) so I'm not sure if it's a Darwin or BSD thing.
Please help.
Thank You,
RichIs this it? I typed "man -k image" into a terminal window and found (among lots of other things):
NAME
sips -- scriptable image processing system.
SYNOPSIS
sips [image-query-functions] imagefile ...
sips [profile-query-functions] profile ...
sips [image-modification-functions] imagefile ...
[--out result-file-or-dir]
sips [profile-modification-functions] profile(s) ...
[--out result-file-or-dir]
DESCRIPTION
This tool is used to query or modify raster image files and ColorSync ICC
profiles. Its functionality can also be used through the "Image Events"
AppleScript suite.
...
Maybe you are looking for
-
s there a way to change the pin color in iPhoto so I can pin my photos and places from those from others. i think it would be cool to see where my friends have also been but not mix it with mine. Thanks
-
N97 system error message when starting Maps
Hi all, I do get a system error message when starting the maps app. I know that this is not a new topic but I did not find after intensive search a solution. - Firmware is updated - soft reset done - it seems that the app is not installed - have dele
-
Oracle VM as virtual machine - Networking
hi I have seen some docs about networking, and thus how to install oracle vm 3.2.x as virtual guest on top of the cloud stack (HA enabled). Is there any best practices document for networking in this fashion? We like to have 3 networks. Network manag
-
Advantage of iBooks Author over Pages?
I was very excited when iBooks Author was released and spent the afternoon producing my first book. Then I learned that iBA doesn't make a conventional (paged) portrait version, that it wipes out the pictures (or some of them), that there are limita
-
Can I play iWeb photo albums on Apple TV?