CJ88: Amount already settled in full

Hello,
I have a problem with the upgrading from 46c to 6.0.
I try to settle a wbs against an asset . This wbs is new as  weel as the asset . Never settled
When i insert an amount  in the settlement rule , there is no problem , the system do it correctly.
But when i introdue a percentage in the settlement rule appeared a green mesage that doesnt allow me to execute it.
Appeared this message ( in green ) :
Amount already settled in full
Message no. KD227
Diagnosis
For one/a sender, there are only distribution rules with one amount. You may use this amount up to an upper level.
The system has already completed settlement of this amount.
I saw the wbs settlement profile , and allows you to insert % and amounts .
Do u know why i have this problem , or if i need to upload a oss note? ( i didnt find anything yet)
Thanks

Hi,
There is an amount but positive , expenses.
The funny thing is that if i insert the amount by hand , settle , but if i insert a percentage not.
And the settlement profile allow to use it.
thanks

Similar Messages

  • The amount of settlement is not correct.

    I have problem about the settlement of Process order that made the moving cost of our product is wrong. 
    Step of Process Order show as below :
    1. date 14.03.2011 17:21:39 => GR Finish Good => Totalamount of GR is -54,232.20
    2. date 16.03.2011 09:17:34 => GI Raw Mat , Package => Total amount of GI is 56,069.55
    3. date 16.03.2011 13:30:46 Settlement #1 => Total amount of settlement is 54,232.20
    4. date 26.03.2011 13:35:27 Settlement #2 => Total amount of settlement is -56,069.55
    I want to know why the Settlement #1 is amount same as only the GR amount? If I tracking the time stamp of GI , the time is before Settlement #1 so the Settlement #1 should be -1,837.35 . 
    Thank you in advance for any advice.
    Pantip S.

    Contact Apple and ask them.
    No one in these user to user support forums can answer such a question.

  • PO report including amount already delivered and invoiced

    Is there a standard report that shows, by line item, the total amount delivered and invoiced.  We are looking for something that will display the PO number, vendor, qty on the PO, amount received, value of the items and amount invoiced.  I tried ME2N, and it shows the amount still to be delivered and invoiced, but not the amount already delivered or invoiced.  We'd also like something that could be easily downloaded to Excel.
    Thanks!

    Hi,
    As you also wants to download in Spreadsheet, i will suggest you to dovelop the report with the help of your technical team.
    Because the ME2N with the scop of list ALLES will give you the complete information, but it will not give you the information in tubular form.
    Regards,
    Manish

  • PO error regarding PR already ordered in full

    Hi,
    I am making a PO with respect to a PR (whose account assigment is a WBS) but system is giving error that PR already ordererd in full. But i have checked the PR, there is no PO made out of that PR.
    What can be the problem??
    Regards
    Kalpesh

    Hi,
    SPRO --> MM --> Purchase --> environment data ---> system msges
    make these system msg as warning,
    00 06 400 as warning !
    Also check in PR, Status Tab whether it is blocked or not aslo in Qty Tab ..if it is closed or not
    Regards,
    Pardeep Malik

  • PR already ordered in full message when it is still open

    When converting a PR to PO, it is showing an error message that, the PR is already ordered in full. but it is for sure that, the PR is still open.
    Can anyone give a soultion for this.

    Dear,
    Please check below detail.
    1) Enter T-code ME53N, enter your purchase requisition number.
    Go to item level, "Status".
    Is it any purchase order prepaid with referance of purchase requisition.
    2) Check quantity of purchase requisition.
    3) Check status of purchase requisition from,
    Status Tab, Quantity/Dates Tab,
    Regards,
    Mahesh

  • I already paid in full for a year subscription.   However, I just received a Thank-you-for-your $29 payment email.

    I already paid in full for a year subscription.   However, I just received a Thank-you-for-your $29 payment email.
    Please don't bill me twice.  Correct the situation.
    I have to say that your subscriptions and payment setups have been trippy for me.   This is not the first problem I've had with you in the payment arena.
    I LOVE your products.  I do not love your billing dept.

    This is an open forum, not Adobe support... you need Adobe support to help
    Adobe contact information - http://helpx.adobe.com/contact.html
    -Select your product and what you need help with
    -Click on the blue box "Still need help? Contact us"

  • HT4009 still not installed what i purchased but the amount already deduct please help me..

    till not installed what i purchased but the amount already deduct please help me..

    Assuming that you are referring to an in-app purchase, then if you haven't received it then try the 'report a problem' link to contact iTunes Support : http://reportaproblem.apple.com
    If the 'report a problem' link doesn't work then you can try contacting iTunes Support via this page : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

  • I am interested in a CC for Photograpers membership. I already have a full Lightroom 5 license.

    I am interested in a CC for Photograpers membership. I already have a full Lightroom 5 license. What are my options? What about the Lightroom License?

    Thanks for your quick reply, Jeff.
    I would like to know if there is some sort of refund or discount on the CC for photographers as I already own a Lightroom 5 license.
    Subscribing to the Creative Cloud Photography plan would include a second copy of Lightroom for me.
    Just for information: The one addition, the mobile app is of no use to me - for now - as I do not have an IPad.
    Best Regards,
    Luc

  • Reposting already settled trips to a new GL account/vendor

    Hi,
    I am working for an external client which have been posting some expense types to the wrong GL account for three months. This is expense types paid by company and the posts have been posted to debet on an expense account which is correct but the kredit post has been registered on the same expense account which means that no total costs has been registered.
    I know i can move all posts manually in FB01 from one account to another but it is a lot of posts since the company has 6000 employees and i also have to consider cost centre and tax. With these company paid expenses they want them to be posted on the employee vendor account as well which pretty much means I have to move all posts manually based on tripnumber and split the amount if there are different cost centre and tax code. Beacuse of these variables I can't create a batch in LSMW either.
    So my question is if there is a way to create a complete reotroactive accounting for these trips when the correct account is set up in the IMG. I mean if i change a per diem rate or an amount in a trip i can open the trip and settle it again, SAP then  calculates the change with correct posting to FI.  But just changing an account does not trigger the posting program to correct this error.
    I hope there is a way so we don't have to do this manually...
    Frida Kindberg

    Hello Frida,
    You mentioned that this is a fairly large client and therefore I assume the no. of trips for the past 3 months are also higher.
    I would NOT suggest you to amend posted trip and re-post it again to the correct account as this would be cumbersome job.
    Although, am unsure of any better way to achieve the correction, I think a manual journal for the past transactions should be considered.
    Rgds
    CONMJI

  • CJ88 Issue - Periodic settlement to a fixed asset

    Dear partners:
    We are facing troubles because of this situation:
    I am trying to make a periodic settlement using CJ88, but then appears error AA834. It only happens with one external activity linked to a purchase order with an advance payment. With other activities which have a periodic settlement to the same definitive fixed asset and no advance payment, there is no problem with the operation using CJ88.
    Please excuse me if I am not being clear, I am an engineer and it si very difficult for me to talk about financial stuff even in my first laguage!
    Best regards,
    Diego C.
    Edited by: diegofca on Feb 18, 2010 4:34 PM

    Hi,
    Please check whether you have defined in transaction code OAYB for "Transaction type group" 15 (down payments) the asset class of the affected asset You are posting to in settlement (normally this is the AuC which You can derive from the settlement rule->from there You can check the asset class).  You might receive the error on in settlement as indicated in the long text for the exact transaction group. Normally for transaction type group 15 you have to define all AuC classes to run settlement properly.
    Hope it will be helpful for you.
    best regards, Takashi

  • My computer crashed and i had to re-install firefox.but i had already purchased the full version of downlload helper, do i have to purchase it again?

    I did not have to pay for firefox because firefox is free. But i DID purchase the full version of downloadhelper way long before my computer crashed. Download helper has a record of my IP address along with my name, and email, and i remember seeing a number key for my purchase when i used to look in the options window. So will they make me pay for a legitimate version of downloadhelper if they have it on record that i already purchased it? Thats what i want to know, because i should not have to buy it again.

    Thanks both of you. I clicked on this link, http://www.downloadhelper.net/support-expert.php , that ed-meister gave me, and it got to my problem, after 2 or 3 short questions, it asked me for my email that i used when i logged in and paid for the converter. When i gave it to them they automaticlly sent a new key number to my email but told me that i had to verify my email before they could validate it. I then went back to the page where they asked me the questions and entered the new key number in the space they provided for me to enter it, but nothing happened. Dont hit the reset or it will start all over and mozilla will think that you are running a scam to get key numbers. So what i did instead was open up downloader and went to preferences, then over to conversion. It stil said that i was not registered. So i hit register and THAT is where i entered the key number that i was given. At first a message came up that said it was an invalid key number, so i did it again and retyped it in and it went through, it showed my full real name and email from when i registered long ago, (so i know that they still had me in their system) along with the new key number that i was given. So remember, once you get your new key number, immediately open downloader and go to preferences, then conversion, then register with your new key.

  • CJ88 in Background / BAPI for CJ88 / BAPI for Settlement

    Hi Experts,
    Is there any BAPI for CJ88. I am developing a report in which I need to pass a WBS element for its settlement which we do in CJ88.
    Thanks in advance
    Edited by: priti suryawanshi on Jan 10, 2009 11:39 AM
    Edited by: priti suryawanshi on Jan 10, 2009 12:14 PM

    Thanks a lot Shrikant for ur reply.
    Actually i have developed a y-report in which i give project def. as input. Now when i execute the report,
    in the report i read the wbs element of thar project def. whose settlement i need to do. The problem is that if any error comes during the settlement, i need to capture these errors and restrict the report from futher processing.
    When we manually execute through CJ88 transaction, we give the wbs element and if any errors, we can see them in the display. Now i am not able to cpture these errors. So was asking for a BAPI or FM which can serve the purpose.

  • Production order with negative amount for settlement in to Material for MAP

    Hi All,
    When I am trying to settle some production orders, it is giving me an error "Moving average price for material is negative" and doesnot let me settle them. we have maintained our materials at MAP and settle our production order variances to material to adjust its MAP. In these orders, it is trying to settle negative value, which is greater than the total value of the stock of materials and if settled leaving some of the stock with negative value. does any body has this situation and what would be the solution for this ?
    Thanks
    MKR

    Hi,
    This is Pavan Fronm IBGroup Rajnandgaon.
    To My Knowledge,
    When U Settle the Production Order, the Diffence Between the Target cost and Actual cost(MAP) of Finished Material hits the Material Account of the finished goods.
    Say Suppose,
    Target cost (Production Cost) =   Cost of Raw material + consumable,   =  10
                                                    Activity ( Labour, Power, etc)              =    5
                                                    Overheads.                                        =    2
                                                                                    17
    Actual Cost is ur Finished Material (MAP). = 18
    CASE 1:
    Now the system calculate the difference as 17 - 18 = -1 Rs , it try to reduce from Material Cost,
    Now in case if Material has the stock say 1 unit.
    it will reduce the cost of material by 1 rs in Material Master.
    If the Material has no stock , as we know the system try to reduce the cost from zero stock tends to
    give us a message saying
    MOVING AVERAGE PRICE OF MATERIAL IS NEGATIVE.
    CASE 2:
    If Target - Actual is say +1 RS it increases the material price to 1 Rupee, if stock is Zero , then 1 Rupee
    hits the Price Difference
    CASE 3: *STANDARD PRICE INDICATOR*
    In case of Standard Price indicator Every thing beyone the Material Price , whether respect to negative
    variance  or positive variance hits the price difference.
    So I request u to settle the order if u use MAP for Finished goods befor dispatch of finished good to calculate actual production cost for ur finished material..
    We can Also use MR21 for price change if the stock has dispatched befor settlement, but it is not suggestable to my knowledge hence ur material wont carry actual production cost if that is thae case.
    Please Correct if I m Wrong.
    Regards
    J .K .PAVAN KUMAR
    SAP PP-PI Consultant
    Edited by: PAVANIDLUR on Mar 30, 2009 9:05 PM
    Edited by: PAVANIDLUR on Mar 30, 2009 9:09 PM
    Edited by: PAVANIDLUR on Mar 30, 2009 9:11 PM

  • Why is there an upgrade link on my adobe cloud page when I already have a full membership?

    When I log into my adobe cloud, at the top left side of the window it has three links.  One is "files", one is "Apps" and one in red "UPGRADE".  I have a full membership for at least 6 more months, and although I have the introductary price, I purchased it with the understanding that this was a full membership.  Can Adobe remove this link?  It really seams to distract me when I think I'm not getting a full version of software, and like today have wasted some valuable working time simply on trying to find out how to contact Adobe without speaking to someone for an hour.
    Oh yes, and also when I click on APP to upgrade,(lets say, as in today, Literoom)  the two links under each software icon now says "try" or "learnmore".  (Although it seems like I have full versions of software downloaded.)  I could have sworn at one time it was "download" and "learnmore".
    If I'm not getting my full version software then this cloud stuff is for the birds and it's not going to work for us faithful Adobe consummers.
    Message was edited by: JLTMade

    I have confirmed you have a paid membership. You are getting the full version of all the software included.
    What happens if you sign out, clear the cache and cookies in browser, restart the browser and sign back in? Do you still see the Upgrade link?

  • Vendor open item amount to settle with two different banks  in F110.

    Hi
    Actually client requirement is one vendor line item to settle two different banks. Is there possible in APP program TC F110?
    How we can configure and how to settle one line item with two different banks in APP program.
    Please give me suggestions as soon as possible.
    Venkatesh
    Edited by: vdd08381 on Nov 5, 2011 1:19 PM
    Edited by: vdd08381 on Nov 5, 2011 1:20 PM

    Hi,
    Actually client requirement to work on one line item to settle two different banks.
    Once we have done partial payment to vendor can not give to cheque to vendors. My point view this is not possible.
    Is there any option please post the customization?
    Venkatesh
    Edited by: vdd08381 on Nov 7, 2011 5:36 AM

Maybe you are looking for