CJ88 Issue - Periodic settlement to a fixed asset

Dear partners:
We are facing troubles because of this situation:
I am trying to make a periodic settlement using CJ88, but then appears error AA834. It only happens with one external activity linked to a purchase order with an advance payment. With other activities which have a periodic settlement to the same definitive fixed asset and no advance payment, there is no problem with the operation using CJ88.
Please excuse me if I am not being clear, I am an engineer and it si very difficult for me to talk about financial stuff even in my first laguage!
Best regards,
Diego C.
Edited by: diegofca on Feb 18, 2010 4:34 PM

Hi,
Please check whether you have defined in transaction code OAYB for "Transaction type group" 15 (down payments) the asset class of the affected asset You are posting to in settlement (normally this is the AuC which You can derive from the settlement rule->from there You can check the asset class). You might receive the error on in settlement as indicated in the long text for the exact transaction group. Normally for transaction type group 15 you have to define all AuC classes to run settlement properly.
Hope it will be helpful for you.
best regards, Takashi

Similar Messages

Issue in settlement of WBS to Asset under construction

I had created new WBS elements to projects and tried to settle the values in the WBS element to Auc at the end of period 12.
Instead of settling to Auc acquisition account specified in account determination in asset accounting, the values are trying to settle to downpayment clearing account specified in the asset accounting.
Can you tell me how I should correct that.

When you search on this forum try to put Date range "ALL" to get more results. Please read below threads and you will get the solution.
MIRO:Transaction in area 15 contradicts the net book value rule
Transaction in area 01 contradicts the NBV
Looks like you have a negative balance in your WBS which you are trying to settle to FA.

Automatic settlement rule for receiver 'Fixed asset' (with out IM)

Hi Experts
I am working with project settlement to a fixed asset.
I have defined a selttlement profile in which, FXA is the only valid receiver.
Please note that we do not use Investment managent and hence no automatic AUC.The predefined asset to be used for settlement.
In this situation i am unable to generate settlement rule automatically as like the case with CTR.
The below message is experienced.
"Enter a distribution rule for Asset without a validity limit"
However i have manually maintained the settlement rule with specification of appropriate asset as receiver and settled.
In this scenario, how to ensure that the settlement rule is automatically generated, any where can we refer the fixed asset?
warm regards
ramSiva

Hi,
Settlement rule cannot be automatically maintsined, you have to maintain manually, for example if you want to settle to fixed asset, how the system know to which fixed asset it should settle. You have to maintain settlement parameter manually.
Regards,
Sreekanth

CJ88 Settlement to Fix Asset

Hi experts,
I tried to do settlement from a WBS to a fix asset. After maintaining the settlement rule I went to CJ88 to do the actual settlement, however i got the following error message:
Dignosis
Duriing settlement of sender WBS there was an atempt to settle a posting that has account assignment OPERATING / /(fund/functional area/ grant) to an assset subnumber. However, the receiving asset XXXXXX does not have an asset subnumber with this assignment.
Can an expert please advice on what I can do and if it has anything to do with PS side or asset side?
Thanks.

Hi,
I would suggest you to take the help of your FI/CO consultant in this case.After going through your post i don't think it has got anything to directly from the PS perspective.
Request others to comment if am wrong.
Regards,
Gokul

Settlements from revenues/debit-side down payments to receiver fixed asset

Hi
while settling the WBS to AUC i am getting the below error
settlements from revenues/debit-side down payments to receiver fixed asset is not allowed
please advise how to resolve the issue
Thanks
Rao...

Hi Rao,
As a matter of system design revenues must not be settled to assets under construction and/or regular assets.
Please see the note #741828 which explains the problem more detailed.
In some cases it is sufficient to maintain a "dummy" settlement rule (e.g. internal order as a receiver for the revenues) if the BALANCE of the revenue cost element in the settlement period is "0". The note #741828 advises in detail on how to proceed.
As a last resort the note also offers a coding change in case you do not want to follow the workaround (so that message KD561 is suppressed during settlement). You may thus remove the coding change again after you have successfully settled.
Regards Bernhard

Fixed Asset Importation Issue (Capitalisation Date)

Hello experts,
I have an issue regarding fixed asset importation.
I've import the fixed asset master data correctly in the system, with it's correct capitalisation date, APC, depreciation cumulative value and everything else correctly in the master data. Under Administration --> Data Import/Export --> Data Import --> Import Fixed Asset Master Data from Microsoft Excel.
However, where the issue is, it's now on the fixed asset history sheet, where the capitalisation date, is defined as the first date of the fiscal year "01/01/2014". Where by none of these assets were purchased on that date. But everything else on the report is correct except the capitalisation date.
Due to this issue, it is hard to explain how an asset was purchased on 01/01/2014, which have a use full life of 4 years, has depreciate completely in 2015. But if I check in its master data, I find out the capitalisation date is like in 6 years ego.
Note: I'm using SAP Business One 9.0 PL11
Any suggestion, comment or help is highly appreciated.
Best Regards,
Cedric Kayitare

Hi Cedric,
Capitalization date won't change it self after import. Check your import sheet which capitalization date you have enter. you need to execute fiscal year change and then import sheet.
If you have capitalization date for different years then you should have all period created and then year transfer.
In that case you will have to run depreciation from SAP for all corresponding year.
Post your sheet with heading for more understanding.
Regards,
Chintan

Settlement of WBS to the Fixed Asset in another company code

Hi Friends,
I have another problem with WBS elements and fixed assets.
I used WBS elements to create a AUC by AUC settlement in company code A. Then I put a second settlement rule with settlement type "FUL" in WBS element and settle AUC to a depreciable asset in company code A. Then I transfer the depreciable asset from company code A to company code B. Now I put the current month as the end day of the second settlement rule and add a third settlement rule in WBS element in compnay code A. The third settlement rule will settle to the depreciable asset in company B. When I am adding the third settlement rule, the system gives an error: "Asset XXXX not in company code A" .
Then I add another WBS element in company code A and put a settlement rule which settle to the depreciable asset in company code B. The system did not issue any error. Everything works fine.
So it seems the WBS element cannot settle to the asset in the other company code if it created a AUC in its own company code.
People told me that it worked in their legacy SAP system. So I am wondering whether there is some settings that I did not do, which caused this problem.
Do you have any idea about this?
Thanks,
Ting

in the requesting company codeon the wbs master data enter the company code for which the AuC and the fixed asset will be created
in this way you can settle from a project in one company code to an asset in another company code

AuC to Fixed Asset Settlement... (through Investment Management)

Hi,
Is there any way wherein I can settle the AuC to Fixed Asset without clearing down payments related to that AuC?
Kindly assist....

Hi,
Is there any way wherein I can settle the AuC to Fixed Asset without clearing down payments related to the same?
The reason for this is my client made a down payment (with special GL indicator A) in December 2010 and he wants to settle the asset in December itself....
However, the down payment clearing is happening in this month.... But, he does not want to wait till the down payment clearing and wants to settle the same in December.
When he is trying to settle Without down payment clearing he is getting the following error...
Down payment to recipient 212000 0 area 01 amount 74,034.00 not cleared
Message no. AW605
Diagnosis
All downpayments were not cleared for the asset under construction for the receiver 130434 0 in area 01. An amount of 74,034.00 was not cleared, or too much was cleared.
You can only completely transfer an asset under construction if you reverse the down payments in the current fiscal year beforehand.
Procedure
Clear the downpayments that you want to settle to receiver 130434 0.
Kindly assist on this issue.... whether it is possble or not?
Thanks in Advance

Settlement Fixed Assets

Team i am trying to settle fix assets today and get the following messages
1 "Settlement before period 8 2008 is only possoble after reversal" can someone tell me in detail what I must do?
2- I also get settlement amount > Available amount
3- Execute amount settlement up to and including settlement period 008 2008
Not sure what to do on each instance, your help will be greatly appreciated.

You have already carried out settlement for the period 08.
There are two options:
- reverse the settlement for the period 08 and then execute the settlement again.
- Enter any period that is greater than period 08.
Settlement amount > available amount
I believe, you are using amount in the settlement rule. the amount you have mentioned in the settlement rule is greater than the amount posted. Check the amount specified in the settlement rule
Execute amount settlement up to and including settlement period 008 2008 - Again, settlement for certain period was not done. Check the settlement rule, its valdity and execute the settlement for all periods upto 08.
Thanks,
Sathya

Fixed Assets Posting period

Good Afternoon,
We have a customer that accidently created a posting period for a Year, e. g. 2011-01, when it was supposed to be created for months (12). He then deleted the period from the Posting Periods in System Initialization and created the correct period, e.g. 2011. In the fixed assets add-on both periods remained and the add-on can´t be updated accordingly.
When they did the fiscal year change they changed from 2010 to 2011-01, instead of doing to the correct one, 2011. Then the fixed assets values were updated for the period 2011-01 (and not for 2011).
Now they need to do the depreciation run for January (and next months) and they can only select the option 2011 (can't select 2011-01). The depreciation runs but, in the end, doesn´t post anything in the journal entry.
What can I do to solve this issue?
Thank you,
Susana Cunha.

Hi Gordon,
How can I break the links related to fiscal year change done from 2010 to 2011-01?
When I try to do fiscal year change again i can't select the 2011 year, the field is automatically filled with 2011-01. Then I can´t update de fixed assets values for the period 2011.
Thank you,
Susana.

Fixed Asset calculates extra period for Depreciation

Hi All,
I have imported the Fixed Asset for 2007B for the Year 2010. while checking the import, i notice that the system calculates an additional period for depreciation.
Here is my scenario :
a. Asset Cost = 15,863.12 (purchased on 31-May-2007).
b. Useful Life = 36
c. Remaining Life = 4
The above are displayed according to import file.
At the Depreciation Tab, there are 5 rows of planned depreciation calculated. Period 01 to Period 05.
How can the system calculates 5 periods when there is only 4 remaining periods for the asset?
This happens to all the assets being imported.
Please advise.
Jessie

Further information.
The Net Book value = 1762.94
with Accumulated Depreciation = 14100.18.
So the remaining 4 periods should be calculated as = 440.735 (per month for 4 months).
but it is displayed as 352.59 per month for 5 months.
The Fixed Asset is setup as Monthly Basis.
Using Straight Line Mehtod = Net Book Value / remaining life.

Actual cost of Production Order settled to Fixed Assets

Dear all,
My client is doing in-house production of moulds (internal order suggestion is not accepted by the client) for which
they have the following
1. BOM
2. Machine hour
3. labour
4. overhead etc
5.plan value
6. actual value
Can i settle the actual cost of production order to Fixed Asset ?
If yes
what are process kindly give me if any process other then the below
1.production order created
2. settlement profile - FA is settlement optional
3. allocation structure
4. Asset created
5 define asset in settlement rule
Kindly give me your valuable input
regards
elango

Hi,
Although i am not CO expert , please check with your FICO consultant who are expert before make the final call.
During settlement to a G/L account or a fixed asset, the system ignores additional account assignments that were manually specified in the distribution rule.
Based on what i know .
you can stipulate that settlement may be made to cost centers and orders, but not to fixed assets.
The Settlement profile is something that you need to create a settlement rule to settle the actual costs of a sender object.
About the Settlement rule is something that contains the distribution rules for the sender. It will define how the way to settle the cost.
Allocation Structure
In the settlement structure you combine the primary and secondary cost elements into groups, in which debits are then posted to the sender objects. For each group, you specify whether (for settlement to a given receiver type) settlement is performed
by cost element or using a settlement cost element.
For example, you might use settlement cost elements:
To document the purpose of an order (such as, repairs or maintenance)
To reduce data volumes (you can combine a number of debit cost elements
under one settlement cost element).
TQ

How to Link equipments(PM) in a Settlement from AUC to Final Fixed Asset

Hi All,
I need your help with an integration problem between AA, CO and PM.
This is the scenario:
We are buying equipments that should not be capitaliazed until deliver them to the customer so to support this we do the following flow:
1. Create an sheduling agreement for the whole year with and AUC and a statistical Internal Order.
2. We create a 'Good receipt' for purchasing equipments(PM) againts the scheduking agreement. At this time we store the equipments in a specific storage location and those equipments are not capitalized. The equipments are create automatically.
3. We deliver the equipments to the customer, not necessarily all purchased equipments.
4. Monthly we have to capitalize the equipments that were delivered to the customer so we create a final fixed asset and execute the settlement of the AUC againts that final fixed.(First AIAB to create settlement rule and then AIBU to distribute)
Problem:
When we execute AIAB for the step 4 we can not link the equipments with the final fixed asset, in the settlement rule we have to calculate manually the percentage or the amount that shoul be settle according to the equipments that were deliver to the customer, but we would like to:
1. Link the equipments to the final fixed asset.
2. Update the material and quantity in the FI posting line item.
3. Update the quantity field in the final fixed asset master record automatically.
Do you have any idea?
Many thanks in advance.

Hi,
Please check in the screen layout for Asset Master. I think the equipment field is available.

Fixed Assets : How to fetch assets from FA tables depending on periods submitted in query ?

Hello,
Module : Fixed Assets
We are trying to fetch the assets for a report depending on the periods['From Period' & 'To Period'] given to SQL query,but we are not getting count of assets as expected.
And so the count isn't matching with 'CIP Details Report' which is a seeded oracle report.Here is the query that we tried,
SELECT   fadd.asset_id, fadd.asset_number,
         fak.segment1 || '.' || fak.segment2 asset_key, fadd.tag_number,
         fadd.description asset_description,
         fadd.attribute_category_code asset_category,
         fb.date_placed_in_service, gp.start_date, gp.end_date
    FROM fa_additions fadd,
         fa_asset_keywords fak,
         fa_books_v fb,
         gl_periods gp,
         fa_deprn_periods fdp,
         fa_asset_history fah,
         fa_transaction_headers fth
   WHERE fadd.asset_key_ccid = fak.code_combination_id
     AND fadd.asset_id = fb.asset_id
     AND fah.asset_id = fadd.asset_id
     AND fth.asset_id = fah.asset_id
     AND fth.transaction_header_id = fah.transaction_header_id_in
     AND fah.asset_type = 'CIP'
     AND fdp.book_type_code = fb.book_type_code
     AND fdp.period_name = gp.period_name
     AND fdp.book_type_code = :p_book_type_code            --'KV US CORP BOOK'
     AND fdp.period_counter =
            (SELECT MAX (fdp.period_counter)
               FROM fa_deprn_periods fdp
              WHERE 1 = 1
                AND fdp.calendar_period_open_date BETWEEN (SELECT start_date
                                                             FROM gl_periods
                                                            WHERE period_name =
                                                                    :p_period_from) = -- 'JUL-12-F13'
                                                      AND (SELECT start_date
                                                             FROM gl_periods
                                                            WHERE period_name =
                                                                    :p_period_to)) -- 'DEC-12-F13'
     AND fth.transaction_date_entered
            BETWEEN (SELECT calendar_period_open_date
                       FROM fa_deprn_periods                      --gl_periods
                      WHERE period_name = :p_period_from           -- 'JUL-12-F13'
                        AND book_type_code = :p_book_type_code)   --'KV US CORP BOOK'
                AND (SELECT calendar_period_close_date
                       FROM fa_deprn_periods                      --gl_periods
                      WHERE period_name = :p_period_to            -- 'DEC-12-F13'
                        AND book_type_code = :p_book_type_code)
GROUP BY fadd.asset_id,
         fadd.asset_number,
         fak.segment1 || '.' || fak.segment2,
         fadd.tag_number,
         fadd.description,
         fadd.attribute_category_code,
         fb.date_placed_in_service,
         fb.deprn_method_code,
         fb.life_in_months,
         gp.start_date,
         gp.end_date
ORDER BY 1
The query returns the assets which have the 'transaction date entered' between the periods submitted.
But what about the assets who's 'Beginning Year Balance' is not zero [in the periods submitted in the query], those assets should also get displayed in the report.[and seeded report 'CIP Detail Report' shows assets who's 'Beginning Year Balance' is not zero along with the assets which have the transaction date entered between the periods submitted]
Any inputs / help / suggestions on this ?
Thanks !

This is a strange requirement, depending on the columns you have and what are optional in them, one way is to have separate operations and each opeartion will have different inputs and for each operation , a different DB Adapter is called. But this way, it results in more number of operations for the service as well as more number of references in the composite. Even if you pass the column inputs to the SQL procedure, it will result in a large number of if-else cases..
Thanks,
N

Project Settlement for Post Capitalisation Assets (CJ88) or CJ8G

Hi All,
I would like to settle projects to an asset that should have been capitalised in a previous fiscal year. i.e. post capitalisation. When I post to an asset created with "post capitalisation" indicator, the FI journal does not show the correct values ie. Accumulated depreciation etc. the way it would if the same was performed within Fixed Assets.
Help Appreciated
Samir

Hi,
Standard user exit provided was COOM003. It may help you to change the receiver to G\L account while executiing the Txn CJ8G.
Regards,
Nag

CJ88 Issue - Periodic settlement to a fixed asset

Similar Messages

Maybe you are looking for