"Clean URLs" in Drupal not working on OSX Server 10.5.5

As per the Drupal website, I have enabled the "Allow Overrides" feature in ServerAdmin for each website that uses Drupal and needs Clean URLs. Unfortunately, after restarting the service and even a reboot, this does not remedy the issue of Clean URLs not functioning for the websites. Any ideas on why that is? I am running OSX Server 10.5.5 and Drupal 6.2 - 6.4.

Clean URLs do work. It can sometimes be frustrating getting them going, yes, and the directions that are available over at the Drupal site (and which set are you using?) can be somewhere between problematic and stale.
Are you using the .htaccess file or /etc/apache2/httpd.conf here, and is it set up right? (There are two versions of the Apache web server and two configuration roots present in 10.5. The newer of the two uses the /etc/apache2 root and the older uses the /etc/httpd root.)
Things can get interesting with the leading-dot files as these don't show (by default); you can end up not getting these files copied if you're not careful.
Make sure the Drupal file protections and ownership settings are right, too. Ownership on everything but the /files area should be root or such, with read access allowed for www. Don't let Apache write anywhere you can avoid it.

Similar Messages

  • Latest wordpress not working on OSX server 10.4

    I have had wordpress running a theme called semiologic without problems for quite some time. However, I have been trying to update with the latest version of that theme which includes the latest version of wordpress and it will not work. I continually get errrors when trying to use it such as:
    [Mon Dec 31 00:50:39 2007] [notice] child pid 19223 exit signal Bus error (10)
    httpd(19236) malloc: * Deallocation of a pointer not malloced: 0x36b0af8; This could be a double free(), or free() called with the middle of an allocated block; Try setting environment variable MallocHelp to see tools to help debug
    [Mon Dec 31 00:50:49 2007] [notice] child pid 19222 exit signal Bus error (10)
    [Mon Dec 31 00:50:51 2007] [notice] child pid 19236 exit signal Segmentation fault (11)
    httpd(19237) malloc: * Deallocation of a pointer not malloced: 0x36b3f38; This could be a double free(), or free() called with the middle of an allocated block; Try setting environment variable MallocHelp to see tools to help debug
    httpd(19237) malloc: * error for object 0x36b3e50: incorrect checksum for freed object - object was probably modified after being freed, break at szone_error to debug
    httpd(19237) malloc: * set a breakpoint in szone_error to debug
    httpd(19237) malloc: * error for object 0x36b3e50: incorrect checksum for freed object - object was probably modified after being freed, break at szone_error to debug
    httpd(19237) malloc: * set a breakpoint in szone_error to debug
    [Mon Dec 31 00:51:08 2007] [notice] child pid 19237 exit signal Bus error (10)
    I cannot find the source of this problem. I am wondering if anyone has the current version of wordpress running on OSX server 10.4 and any suggestions what might cause this problem. Thanks in advance!!
    Eric

    Only 10.3.9 server here, sorry. But the WordPress v2.3.2 is running fine.
    Have you attempted to switch to the default theme and see if it works? There may be an issue between that theme, the new WP, and possibly there were a couple of remnant files left behind when you upgraded that could be causing your problem.

  • Clean urls in drupal on Mac Osx server 10.5

    How do I configure "Clean URLs" in drupal on mac osx server 10.5. ?
    How do I get it to work???
    HElp Please
    Message was edited by: Marianna.83

    You need to make sure that the group you are enabling the services for is in the LDAP path for the 10.5 server, and not in the local directory or the LDAP for the 10.4 server.

  • Screensaver is not working in OSX Yosemite

    Hi,
    My screensaver is not working in OSX Yosemite on my macbook pro late 2008
    Can't solve it by my self..

    I had noticed I was having this issue too, and my screensaver never kicking in, and just going to sleep with it never kicking in.
    I had gone in and checked to see if any of the settings had got changed or deleted in the system upgrade, but they were all still set at what I had them at prior... so, did as some attempted above also, and adjusted the times for it to kick in, and still nothing.  Worked when I would hit 'Preview', but still not kick in at the interval time.
    What I just did to get it to work, was just to simply go into System Preferences>Desktop & Screensaver, and just reselected the folder of images that I want to be used, in my case, a folder of images in my iPhoto.  And it now works.
    Apparently, it wasn't working, because, even though it was still selected to use that folder in iPhoto, something must have changed in the upgrades, which might of had something to to with the iPhoto update too, where it had to update my iPhoto library upon relaunch... and my screensaver settings were set to access that older directed to folder within Library, that was updated in the new release... and so, just repointing it to that folder now in iPhoto, got it to work.
    At least, that is my figurin', and I'm stickin' to it! 

  • SharedServices and Workspace URL's are not working in EPM System 11.1.2.2

    Hello,
    SharedServices and Workspace URL's are not working in EPM System 11.1.2.2
    I have installed EPM system V11.1.2.2 in single server environment (MS 2008 Server R2) with following components:
    * Foundation Services
    * HFM
    * FDM
    Have used embedded Weblogic server as application web server and Oracle HTTP server as web server. The installation was successful.
    While configuration,
    1) I selected the option to deploy web applications SharedServices and Workspace to a single managed server. The applications got successfully deployed to EPMServer0.
    2) Also, I selected to configure Oracle HTTP server as web server.
    Both these steps were successful.
    But SharedServices and Workspace URL's are not working. Getting 404 error.
    SharedServices : http://inmum01hyp05.internal.vodafone.com:19000/interop/index.jsp
    Workspace : http://inmum01hyp05.internal.vodafone.com:19000/workspace/
    When I checked Weblogic admin console, EPMServer0 is in SHUTDOWN state, tried to start it but it goes in ADMIN state instead of RUNNING.
    Checked EPMServer0 log at "D:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\EPMServer0\logs" and found the error given at the end of this message.
    Can anyone please suggest a solution for this.
    ####<Jun 6, 2013 11:43:20 AM IST> <Emergency> <Deployer> <INMUM01HYP05> <EPMServer0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <0000JwO7UBi7e5V5u35EiX1Hg2Xf000000> <1370499200246> <BEA-149259> <Server 'EPMServer0' in cluster 'EPMServer' is being brought up in administration state due to failed deployments.>
    ####<Jun 6, 2013 11:43:20 AM IST> <Info> <WebService> <INMUM01HYP05> <EPMServer0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <0000JwO7UBi7e5V5u35EiX1Hg2Xf000000> <1370499200902> <BEA-220103> <Async web service support is not fully configured. The async response web service /AsyncResponseServiceHttps for this server was not fully deployed because the JMS reliability queue was not defined/deployed: weblogic.wsee.DefaultQueue. The server will periodically retry completing the deploy for the service. This message can usually be ignored unless there are async web service applications. To completely disable async web service support, thus avoiding this message, set -Dweblogic.wsee.skip.async.response=true.>
    ####<Jun 6, 2013 11:43:21 AM IST> <Info> <WebService> <INMUM01HYP05> <EPMServer0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <0000JwO7UBi7e5V5u35EiX1Hg2Xf000000> <1370499201090> <BEA-220103> <Async web service support is not fully configured. The async response web service /AsyncResponseServiceJms for this server was not fully deployed because the JMS reliability queue was not defined/deployed: weblogic.wsee.DefaultQueue. The server will periodically retry completing the deploy for the service. This message can usually be ignored unless there are async web service applications. To completely disable async web service support, thus avoiding this message, set -Dweblogic.wsee.skip.async.response=true.>
    ####<Jun 6, 2013 11:43:21 AM IST> <Info> <WebService> <INMUM01HYP05> <EPMServer0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <0000JwO7UBi7e5V5u35EiX1Hg2Xf000000> <1370499201090> <BEA-220103> <Async web service support is not fully configured. The async response web service /AsyncResponseService for this server was not fully deployed because the JMS reliability queue was not defined/deployed: weblogic.wsee.DefaultQueue. The server will periodically retry completing the deploy for the service. This message can usually be ignored unless there are async web service applications. To completely disable async web service support, thus avoiding this message, set -Dweblogic.wsee.skip.async.response=true.>
    ####<Jun 6, 2013 11:43:21 AM IST> <Info> <WebService> <INMUM01HYP05> <EPMServer0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <0000JwO7UBi7e5V5u35EiX1Hg2Xf000000> <1370499201106> <BEA-220103> <Async web service support is not fully configured. The async response web service /AsyncResponseServiceSoap12Jms for this server was not fully deployed because the JMS reliability queue was not defined/deployed: weblogic.wsee.DefaultQueue. The server will periodically retry completing the deploy for the service. This message can usually be ignored unless there are async web service applications. To completely disable async web service support, thus avoiding this message, set -Dweblogic.wsee.skip.async.response=true.>
    ####<Jun 6, 2013 11:43:21 AM IST> <Info> <WebService> <INMUM01HYP05> <EPMServer0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <0000JwO7UBi7e5V5u35EiX1Hg2Xf000000> <1370499201121> <BEA-220103> <Async web service support is not fully configured. The async response web service /AsyncResponseServiceSoap12 for this server was not fully deployed because the JMS reliability queue was not defined/deployed: weblogic.wsee.DefaultQueue. The server will periodically retry completing the deploy for the service. This message can usually be ignored unless there are async web service applications. To completely disable async web service support, thus avoiding this message, set -Dweblogic.wsee.skip.async.response=true.>
    ####<Jun 6, 2013 11:43:21 AM IST> <Info> <WebService> <INMUM01HYP05> <EPMServer0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <0000JwO7UBi7e5V5u35EiX1Hg2Xf000000> <1370499201121> <BEA-220103> <Async web service support is not fully configured. The async response web service /AsyncResponseServiceSoap12Https for this server was not fully deployed because the JMS reliability queue was not defined/deployed: weblogic.wsee.DefaultQueue. The server will periodically retry completing the deploy for the service. This message can usually be ignored unless there are async web service applications. To completely disable async web service support, thus avoiding this message, set -Dweblogic.wsee.skip.async.response=true.>
    ####<Jun 6, 2013 11:43:21 AM IST> <Info> <WebLogicServer> <INMUM01HYP05> <EPMServer0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <0000JwO7UBi7e5V5u35EiX1Hg2Xf000000> <1370499201137> <BEA-000256> <Invoking weblogic.transaction.internal.StartupClass.main(null)>
    ####<Jun 6, 2013 11:43:21 AM IST> <Info> <Deployer> <INMUM01HYP05> <EPMServer0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <0000JwO7UBi7e5V5u35EiX1Hg2Xf000000> <1370499201168> <BEA-149059> <Module dms.war of application DMS Application [Version=11.1.1.1.0] is transitioning from STATE_PREPARED to STATE_ADMIN on server EPMServer0.>
    ####<Jun 6, 2013 11:43:21 AM IST> <Info> <Deployer> <INMUM01HYP05> <EPMServer0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <0000JwO7UBi7e5V5u35EiX1Hg2Xf000000> <1370499201168> <BEA-149060> <Module dms.war of application DMS Application [Version=11.1.1.1.0] successfully transitioned from STATE_PREPARED to STATE_ADMIN on server EPMServer0.>
    ####<Jun 6, 2013 11:43:22 AM IST> <Info> <Deployer> <INMUM01HYP05> <EPMServer0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <0000JwO7UBi7e5V5u35EiX1Hg2Xf000000> <1370499202402> <BEA-149059> <Module /inspection.wsil of application wsil-wls is transitioning from STATE_PREPARED to STATE_ADMIN on server EPMServer0.>
    ####<Jun 6, 2013 11:43:22 AM IST> <Info> <Deployer> <INMUM01HYP05> <EPMServer0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <0000JwO7UBi7e5V5u35EiX1Hg2Xf000000> <1370499202402> <BEA-149060> <Module /inspection.wsil of application wsil-wls successfully transitioned from STATE_PREPARED to STATE_ADMIN on server EPMServer0.>
    ####<Jun 6, 2013 11:44:13 AM IST> <Info> <Diagnostics> <INMUM01HYP05> <EPMServer0> <[STANDBY] ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1370499253433> <BEA-320000> <The Diagnostics subsystem is initializing on Server EPMServer0.>
    Thanks in advance.
    Tej

    Hi John,
    today's update:
    * Uninstalled EPM system V11.1.2.2 completely and after rebooting the server installed EPM system V11.1.2.2 again.
    * During configuration, deployed SharedServices and Workspace to single managed server EPMServer0 on Weblogic server and configured to Oracle HTTP server as web server. Configuration seems successful.
    * Started EPM system.
    * checked Weblogic admin console - EPMServer0 goes into ADMIN state from STARTING.
    * Checked EPMServer0 logs at "D:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\EPMServer0\logs" and found the error given below:
    ####<Jun 7, 2013 2:12:14 PM IST> <Error> <Deployer> <INMUM01HYP05> <EPMServer0> <[STANDBY] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <0000JwTnBZV7e5V5u35EiX1HgPn0000001> <1370594534718> <BEA-149205> <*Failed to initialize the application 'SHAREDSERVICES [Version=11.1.2.0]' due to error weblogic.management.DeploymentException: [J2EE:160149]Error while processing library references. Unresolved application library references, defined in weblogic-application.xml: [Extension-Name: epm-hss-libraries, exact-match: false]..*
    weblogic.management.DeploymentException: [J2EE:160149]Error while processing library references. Unresolved application library references, defined in weblogic-application.xml: [Extension-Name: epm-hss-libraries, exact-match: false].
         at weblogic.application.internal.flow.CheckLibraryReferenceFlow.prepare(CheckLibraryReferenceFlow.java:26)
         at weblogic.application.internal.BaseDeployment$1.next(BaseDeployment.java:648)
         at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
         at weblogic.application.internal.BaseDeployment.prepare(BaseDeployment.java:191)
         at weblogic.application.internal.EarDeployment.prepare(EarDeployment.java:59)
         at weblogic.application.internal.DeploymentStateChecker.prepare(DeploymentStateChecker.java:154)
         at weblogic.deploy.internal.targetserver.AppContainerInvoker.prepare(AppContainerInvoker.java:60)
         at weblogic.deploy.internal.targetserver.AppDeployment.prepare(AppDeployment.java:144)
         at weblogic.management.deploy.internal.DeploymentAdapter$1.doPrepare(DeploymentAdapter.java:40)
         at weblogic.management.deploy.internal.DeploymentAdapter.prepare(DeploymentAdapter.java:191)
         at weblogic.management.deploy.internal.AppTransition$1.transitionApp(AppTransition.java:22)
         at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:240)
         at weblogic.management.deploy.internal.ConfiguredDeployments.prepare(ConfiguredDeployments.java:166)
         at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:122)
         at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:181)
         at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:97)
         at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
         at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:545)
         at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
         at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
    >
    ####<Jun 7, 2013 2:12:15 PM IST> <Warning> <J2EE> <INMUM01HYP05> <EPMServer0> <[STANDBY] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <0000JwTnBZV7e5V5u35EiX1HgPn0000001> <1370594535124> <BEA-160140> <Unresolved optional package references (in META-INF/MANIFEST.MF): [Extension-Name: epm-bpmui-libraries, referenced from: D:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\EPMServer0\tmp\servers\EPMServer0\tmp\_WL_user\WORKSPACE_11.1.2.0\riys07]. Make sure the referenced optional package has been deployed as a library.>
    ####<Jun 7, 2013 2:12:15 PM IST> <Error> <Deployer> <INMUM01HYP05> <EPMServer0> <[STANDBY] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <0000JwTnBZV7e5V5u35EiX1HgPn0000001> <1370594535186> <BEA-149205> *<Failed to initialize the application 'WORKSPACE [Version=11.1.2.0]' due to error weblogic.management.DeploymentException: [J2EE:160149]Error while processing library references. Unresolved application library references, defined in weblogic-application.xml: [Extension-Name: oracle.applcore.model, exact-match: false], [Extension-Name: xerces, exact-match: false]..*
    weblogic.management.DeploymentException: [J2EE:160149]Error while processing library references. Unresolved application library references, defined in weblogic-application.xml: [Extension-Name: oracle.applcore.model, exact-match: false], [Extension-Name: xerces, exact-match: false].
         at weblogic.application.internal.flow.CheckLibraryReferenceFlow.prepare(CheckLibraryReferenceFlow.java:26)
         at weblogic.application.internal.BaseDeployment$1.next(BaseDeployment.java:648)
         at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
         at weblogic.application.internal.BaseDeployment.prepare(BaseDeployment.java:191)
         at weblogic.application.internal.EarDeployment.prepare(EarDeployment.java:59)
         at weblogic.application.internal.DeploymentStateChecker.prepare(DeploymentStateChecker.java:154)
         at weblogic.deploy.internal.targetserver.AppContainerInvoker.prepare(AppContainerInvoker.java:60)
         at weblogic.deploy.internal.targetserver.AppDeployment.prepare(AppDeployment.java:144)
         at weblogic.management.deploy.internal.DeploymentAdapter$1.doPrepare(DeploymentAdapter.java:40)
         at weblogic.management.deploy.internal.DeploymentAdapter.prepare(DeploymentAdapter.java:191)
         at weblogic.management.deploy.internal.AppTransition$1.transitionApp(AppTransition.java:22)
         at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:240)
         at weblogic.management.deploy.internal.ConfiguredDeployments.prepare(ConfiguredDeployments.java:166)
         at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:122)
         at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:181)
         at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:97)
         at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
         at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:545)
         at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
         at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
    >
    Can you please suggest how to overcome this error of Weblogic?
    Thanks in advance,
    Tej

  • Hp scanner software Scan 3 does not work with osx yosemite

    The older software called HP Scan 3 does not work with OSX 10.10. Where can I download an update for this software? 

    Hello @ringie,
    Welcome to the HP forums.
    I understand that you would like to scan from your Photosmart premium C410 to your Mac 10.10.
    I would like to help.
    There is currently no updated software.
    Try the following work around.
    Scanning in OS X v10.10 Yosemite without HP Software
    Hope this helps get you scanning.
    Aardvark1
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!

  • Does using self-signed cert. on ISE server has anthing to do with url redirect being not working

    Hi,
    I am setting up wired ISE environment. Everything is going fine, except url redirect is not working.
    I just wondering, if using self-signed certificate on ISE server has anothing to do with the problem ?.
    Appreciate your input.
    Thanks

    Hi,
    As long as you have not changed the hostname or the domain name (and dns is accurate). You should only receive the certificate warning but still get redirected without any issues.
    Thanks,
    Tarik Admani
    *Please rate helpful posts*

  • Huawei e3276 does not work on OSX 10.10 please help

    After I installed Yosemite Huawei e3276 does not work on OSX 10.10, please advise any work around for this issue - Thank you

    Found a very easy solution online.  Just download the software here and install. works immediately.
    http://translate.google.com/translate?hl=en&sl=sv&u=http://www.tre.se/privat/kun dservice/teknisk-support/Mobilt-bredband/Uppgradering-modemrouter/Yosemite/&prev =search

  • Bad URL fix does not work

    Bad url fix does not work, Skype still crashes when this string has been sent to group chat. People on the group chat are unable to load up Skype properly.

    frank604 wrote:How are you suspending?  As rdahlgren requests, can you manually try to suspend and post output of useful logs here?
    I use the built-in suspend mechanism in KDE 4.12. The problem appeared on all my computers

  • Systran widget not working in OSX 10.9.5

    Systran widget not working in OSX 10.9.5.

    I've branched this to it's own thread, since the issue you're experiencing is unrelated to the one you replied to, and it would be confusing to try and handle them in the same thread.
    Please provide as many of the follow details as possible, so I can attempt to reproduce the issue you're describing (I realize you've provided some of it):
    Read Before Posting: How To Get A Useful Answer To Your Question

  • Safari scrolling does not work in osx mavericks please solve this issue

    safari scrolling does not work in osx mavericks please solve this issue

    I know it is a limited topic, but could you provide a little more detail?

  • The requested URL /mahjongtrails/ was not found on this server.

    Not Found
    The requested URL /mahjongtrails/ was not found on this server.
    Apache/2.2.9 (Debian) mod_jk/1.2.26 PHP/5.2.6-1+lenny4 with Suhosin-Patch mod_python/3.3.1 Python/2.5.2 mod_ruby/1.2.6 Ruby/1.8.7(2008-08-11) mod_ssl/2.2.9 OpenSSL/0.9.8g Server at megazebra-facebook-trails.mega-zebra.com Port 80

    Adding to it,
    First thing need to modify the server.xml and default-web-site.xml file as mentioned . Even after it doesn't work check for the security settings in the browser.
    For IE, Goto Tools-> Internet Options -> Security tab -> Custom level.
    Try enabling the security settings.

  • Web Service Client(Console App) not working on Windows Server 2008 R2 Standard Edition

    I am trying to consume an ASMX Web Service in a console app, its working fine in Windows 7,Windows Server 2012 Standard,Windows Server 2008 R2 DataCenter,Windows Server 2008 R2 Enterprise, But its not working in Windows Server 2008 R2 Standard Edition which
    is the deployment server.
    I tried consuming the ASMX web service using Web Reference and Service Reference as well but its not helping. Its throwing up the following error,
    Message:There is an error in XML document (1, 331491).
    Inner Exception : System.Xml.XmlException: '.', hexadecimal value 0x00, is an invalid character. Line 1, position 331491.
    The scenario is that i call the web service and it returns me an XML i am not able to receive the XML on Windows Server 2008 R2 Standard Edition.
    Please provide suggestions on this I need to resolve this ASAP.

    Hi,
    This question is better asked here:
    http://social.msdn.microsoft.com/Forums/en-US/home?forum=asmxandxml
    Experts here are more familiar about it and they can give you more efficient suggestion.
    Thank you.

  • EXEC SP_EXECUTESQL not working in sql server 2014

    EXEC SP_EXECUTESQL not working in sql server 2014

    EXEC SP_EXECUTESQL not working in sql server 2014
    Hi Amar,
    What's the error when executing this stored procedure?
    I have tested it on my local environment, we can run this SP without any problems.
    Please provide us more information, so that we can make further analysis.
    Regards,
    Charlie Liao
    TechNet Community Support

  • Addon not working on Windows Server 2008 OS

    Dear Friends,
    I have developed an addon in XP and its working fine with XP operating system but it is not working on Windows Server 2008 Standard. Error is "An Attempt was made to load a program with an incorrect format.(Exception from HRESULT: 0x8007000B)".
    Regards,
    Mahesh.
    Edited by: mahesh A on Sep 19, 2009 9:26 AM

    Hi,
    Since only Windows 2008 SBS is supported with SAP Business One and that Server is available for 64bit Hardware as defined by Microsoft, I guess you should look into that direction.
    Regards
    Mario

Maybe you are looking for

  • My 4s will not back up to the cloud

    I am unable to back up my 4s to the Cloud.  The storage on my phone is full, but the iCloud storage 13.2 GB of available storage.  My phone has not back up is 6 weeks and I would like to be sure to do so before purchasing a new phone.  When I choose

  • Default Keyboard input change in using roaming Profile on different Win 7

    We found a strange problem on default Keyboard setting. We are using roaming profiles for all users. One of our users is using two Windows 7. One Windows 7 is VDI for working out of office and another Win 7 is her local PC. She is only using Two keyb

  • One month old Aluminum Macbook...

    I've had it for about a month now and I've had to reset the SMU twice--the first time due to issues coming out of sleep (screen turns blank but computer is still on), and the second time because iSight was not recognized (did not show up under USB in

  • I can't get my Bellsouth account to work on my IPHONE

    IF SOMEONE HAS GONE THROUGH THE SAME PROBLEM ADDING THE BELLSOUTH ACCOUNT TO THE IPHONE "I NEED HELP IN ADDING MY BELLSOUTH EMAIL TO MY IPHONE".

  • Succesful commands for Provisioning Tool(CS6/PC)

    Hi, Have any of you guys had any luck using the Provisioning Tool to unserialize a CS6-installation? If so - what was the command line you used? We've tested various commands but none of them have been succesful. Some gives the return code 1 and a si