Clear In/Out Queues

Hi,
Is there a way to clear the In and Out Queues? For some reason (we're not sure why) the MGP is not updating the server tables. Things are getting added to the In and Out queues but never getting executed. The MGP is still running, yet never empty's the In/Out queues. We've tried restarting the MGP, but nothing changes. Is there a way to empty the In/Out queues?
Thanks in advance,
Theresa

The Out queues get emptied by a client synchronising and sucking the data down, not much to do with the server.
The in queues is different. If you are getting things stuck in the in queues, look in the mobileadmin table c$in_messages - this is the 'header' file for the in queues. You should see recognisable client names, transaction id's and publ;ication item names (WTGPI_nnnnn format), and a seqno$$ column (used to order the processing).
There will also be a series of tables in the mobileadmin schema CMP$WTGPI_nnnnn which are the in queue detail tables (similar to the c$eq/ceq$ tables for the error queues).
Normal reason for things being stuck in the in queues is that there is a mismatch (ie record added/deleted) between c$in_meassages and the corresponding CMp$ table. If there are the same number of records, check the seqno$$ settings.
Also check that the apply phase is being run by the MGP jobs, and if all the above seems ok, then re-start the home container that mobile is running in (fixes a lot of things)

Similar Messages

HT3951 I have several tv episodes stuck in my downloads on my iPad. I receive an error, unable to download when I try to resume downloading. I can't clear them out of the download queue. How do I get rid of these from download?

I have several tv episodes stuck in my downloads on my iPad. I receive an error, unable to download when I try to resume downloading. I can't clear them out of the download queue. How do I get rid of these from download?

You can always finish the downloads in iTunes on your computer and then the TV Shows to the iPad. Launch iTunes and go to Store>Check for available downloads. Finish the downloads and then sync the iPad.
As far as trying to finish the downloads on the iPad .....
Make sure that you do not have a stalled download in iTunes - a song or podcast .... if you have a download in there that did not finish, complete that one first. Only one thing can download at a time on the iPad so that could be what is causing the problem.
If that doesn't work - sign out of your account, restart the iPad and then sign in again.
Settings>Store>Apple ID. Tap your ID and sign out. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Go back to Settings>Store>Sign in and then try to download again.

Clearing the print queue

While printing, the paper supply ran out but when I reloaded, it tells me the printer is out of paper. I've turned off the printer, tried to delete the current job but am still unable to print.
Thank you.

Hi - Have you rebooted the computer yet? I'd try that first. That should clear the print queue in case the previous document is still stuck int he print queue. If that doesn't take care of it, does the printer attempt to pickup paper or do you get any response from the printer when you send a file to print?
Hope that helps.
Say Thanks by clicking the Kudos thumbs up. Please mark the post that solves your problem as an Accepted Solution so other forum users can utilize the solution.
I am an HP employee.

Customization and Extension of the "Out Queue"

My team is looking into using Oracle Lite to support a Fusion integration with Outlook (specifically sales). We are curious if there is any support for customizing or extending the functionality offered by the Out Queue. If so, where can we read about it?

What are you looking to do in the out queue?
There isn't anything for the Out Queue besides a custom built solution. I think GaryW has done stuff like this.

ICloud storage space used up by old data from 1st gen iPad I traded in nearly 2 yrs ago for an iPad Mini. Can't backup any info for mini or new 6 plus. How can I access this old data to clear it out?

My iCoud storage space is being used up by old data from a 1st generation iPad I traded in nearly 2 yrs ago for an iPad Mini. The people at the sprint store where I made my trade were supposed to transfer everything over from my old iPad to the new Mini once they backed up the old device to iCloud. Well, long story short, none of the data ever got transferred to the new iPad, but it all got backed to iCloud, eating up all my storage space. Here I am almost 2 years later, and I've never been able to back-up my iPad mini. What's worse, My iPhone 4 wasn't backed up that whole time, and now I can't back-up my data from my new iPhone 6 Plus to iCloud either. Trying to find creative ways to store and save my information and data between all my devices is getting to be ridiculous. I don't want to upgrade my storage space though...just want to clear out a great deal of what is already being stored. How can I access this old data to clear it out?

The only way to access data from an iCloud backup is to restore it to your device. You could, for example, back up your iPad mini to your computer using iTunes (by connecting it, opening iTunes, then going to File>Devices>Back Up and choosing to back up apps and transfer purchases when prompted), then erase it and restore the old iPad backup (as explained here: iCloud: Restore or set up your iOS device from iCloud), save any recovered data you want to keep, then restore your iTunes backup back to your iPad mini (by connecting it to your computer, opening iTunes, then going to File>Devices>Restore from Backup).
Once you're done with the old backup, delete it from your account to free up the space.

Want to clear images out of Aperture and start over

Probably a dumb question, but I "played" around with Aperture-- imported some images etc and even have a couple of projects.
However, after doing some study-- listening to tutorials I would like to start over.
How can I clear everything out without losing anything.
Thanks for any help you can give me

I found the vault getting rather large and in 1.5 you can have your masters in different folders or hard drives.
Under the 'File' menu you can select 'Relocate Master'. So select the project you want to move, choose 'Relocate Master' from the 'File' menu and Aperture moves the masters & versions from the Vault to the location of your choice. I gaind a lot of hard drive space doing this, relocating masters to another drive.

How do i clear the qRFC queue in a R/3 sandbox

Hi All,
I just built a R/3 4.7B sandbox and we are going to perform an upgrade on it. But before we do that we need to clear the qRFC queue. Can anyone please let me know as to how i go about in clearing the qRFC queue.
Thanks
Anil

Open the infopackage that loads deltas from this infosource.Use option delta and run the infopackage.Do a monitor on this infopackage and check that it has gone GREEN and pulled records.
then go to tcode rsa7 in the source system and highlight the datasource,then click on the 'detail'(lens) button.
In next screen choose radio button delta update and check that it lists 0 records(shows as 0 from 0 records).
Will also probably show 0 LUW's in the delta queue screen beside the datasource tech name.
This confirms that queue is cleared.
cheers,
Vishvesh

I downloads the latest iTunes software update and it properly installed. But, I cannot close the window showing it was completed and the blue completion bar is full but cannot cancel or close it either. Any ideas on how to clear that out and close the

I downloaded the latest iTunes software update and it properly installed. But, I cannot close the update window showing it was completed and the blue completion bar is full but cannot cancel or close it either. Any ideas on how to clear that out and close the window. Tried to quit on both the big window and the software update title in the menu bar. No luck.

Tried that by shutting down via the power button only as the normal shutdown was nixed by the open window issue. It did not help. Found a very similar question in the discussions and it recommended "Force Quit". That worked and the update works normal and the window is gone. Thanks!

[Guide] How To Clear the Play Queue

QuestionHow do I clear the play queue?
AnswerPlease note this is an unofficial workaround and not an official solution.
1 - Click New Playlist.
2 - Add only one song to the Playlist.
3 - Whenever you want to clear the Play Queue double click it.
Once Play Queue is flushed, only the short song you used will be in the Queue. The reason is that the last song played in the Queue always stays until something new is loaded into it other than manually added material.

The MarkupBean uses its own broadcaster (MarkupBroadcaster).
The setBroadcast(boolean b) is available only in the VueEventBroadcaster.
We may work on better solution to fix the issue.
Probably the issue is not related to the number of notifications!. Try this workaround to confirm...!
Workaround (I do not recommend to do this):
- Save the current markup broadcaster : oldBroadcaster = getMarkupBean().getMarkupBroadcaster()'
- Set an empty broadcaster (getMarkupBean().setMarkupBroadcaster(new MarkupBroadcaster())). All the listeners are copied into the new broadcaster
- getMarkupBean().getMarkupBroadcaster().removeAllMarkupEventListeners(); // Remove the copied listeners
- Put back the old broadcaster (markup listeners).

Wrong Entries in Out-Queues

Dear All,
we've got a very big problem in oure CRM Mobiles Sales 3.0. In the Out-Queues we've got wrong entries, which have other Queue-ID's than they expecet to have but they've got the same transaction-ID.
When the clients now try to make conntrans, they get an error message: Internal error in incomming datastream.
Is there any report to clean up the Out-Queues, and fix the problem?
If you know a solution for this problem, please let me know.
Best regards
Christian Rodemeister

Hi there,
I think I have to get a little more detailed.
We have about 300 clients and nearly everyone has got about 2 till 20 wrong entries in his queue.
If we delete all queues this will took about 3 days and afterwards, if then everything on the system is still OK, the extract of all queues will took us about 5-6 days.
What I need is a solution and a reason why these wrong entries occured.
Why is it possible that an entry for another queue exists with a doubled transaction ID in a queue of another client.
If you have any idear please let me know.
Thanks a lot for your help, and all usefull ideas.
Christian

Transfer posting with clearing .with out clearing

Hi
How we do Transfer posting with clearing /with out clearing
whats the purpose
Many Tha

hi with clearing means u r paid that amount directly
for example first u can give/receive advace from customer/vendor thru f-29/f-48
purchase/sales the items theru fb6o/fb70
transfer the values from spl g.l to normal g.l f-39/f-54
normal a/c clearing is f-32/f-44
above process is called with clearing
without clearing means u have purchase/sales for one person
after that that amount is transferred another person that is called withou clearing
example
purchase/sales the items theru fb6o/fb70
transfer the values form one customer/vendor to another customer/vendro thru f-31/f-51 i think it will be helpful.

Do we necessarily need to clear the BW queues in preprocessing steps of SAP

Hello Experts,
A quick question.
I am doing EHP upgrade on BW system
Do we necessarily need to clear the BW queues in preprocessing steps of SAPehpi?
OR the same can be done just before downtime?
A fast response is much appreciated.
Best Regards
Sachin Bhatt

Hello Markus,
Thanks for the info.
We finished EHP4 implementation successfully last saturday.
However to my surprise didnt receive any message by EHPI to clear delta queues.
We cleared it just before down time.
Anyways thanks for the answer.
We wil take a close look when implementing next time during the phase mentioned.
Regards
Sachin Bhatt

Is there any Frame/Channel API command to clear Rx CAN queue ?

Hi everybody,
Is there any NI-CAN CVI command to clear CAN Rx queue/buffer ? .... Something like FlushInQ in CVI ?
Petko G.

Hi Petko,
I didn't find any command which would work like "flush queue", but I believe you should be able to clean the entry queue by reading number of frames available in the read queue, and then calling "Read Net Multiple.vi". All the read data you can just ignore, but I bett you will empty entry queue.
regards,
Stefo

My MacBook has no storage, how can I clear everything out?

My MacBook has been running slow and I want to clear everything out for storage and for it to run faster. How do I do that? Do I just go to finder and delete everything or is there another way?

you don't want to clear everything out, first you want to find out what is taking up the most amount of storage. What version of OS X are you running?

Whenever I start to sign in (MSN Hotmail), previous addresses come up that start with the same letter as mine. I would like to clear them out so that only mine comes up

Problem summary: Whenever I start to sign in (MSN Hotmail), previous addresses come up that start with the same letter as mine. I would like to clear them out so that only mine comes up.
In a different help forum someone told me that the autocomplete (autofill) feature of my browser is enabled. Seems that it is set to save autocomplete data for forms and/or usernames/passwords. I need help with the steps necessary to disable this feature.

Problem summary: Whenever I start to sign in (MSN Hotmail), previous addresses come up that start with the same letter as mine. I would like to clear them out so that only mine comes up.
In a different help forum someone told me that the autocomplete (autofill) feature of my browser is enabled. Seems that it is set to save autocomplete data for forms and/or usernames/passwords. I need help with the steps necessary to disable this feature.

Clear In/Out Queues

Similar Messages

Maybe you are looking for