"Clear Recents" screen only option with phone use since 4.1 upgrade.

Since I upgraded to 4.1 my phone is stuck on the screen one would see if you decide to clear recent calls. I noticed this when I got a call yesterday and after the call ended that screen appeared. I tried hitting the Cancel and nothing happened. Not wanting to erase recent calls I elected not to hit the Clear All Recents button so I just hit the home button. Problem is that I can't access my phone to make a call. When I hit the phone button all I get is the Clear Recents screen. I can still get incoming calls.
I did I reset on the phone yesterday and that seemed to work until today when I noticed it acting up again. I've reset again and will wait to see if it persists.

Do a "Hard Reset" to clear problem: Press power and home buttons simultaneously until apple logo comes on. wait. It will make a ping sound and go to black, or it may go to the opening screen. Start phone.
It is suggested that once a week you should turn the phone power off to refresh.

Similar Messages

Clear recents screen

When is the clear recents screen feature going to berestored?????????????????

Do a "Hard Reset" to clear problem: Press power and home buttons simultaneously until apple logo comes on. wait. It will make a ping sound and go to black, or it may go to the opening screen. Start phone.
It is suggested that once a week you should turn the phone power off to refresh.

TS3899 After upgrading to IOS 7, the only options Gmail gives using Safari or mail to attach files are attaching a camera roll file or draw a scribble. How can I attach a PDF or word doc? I was able to do so using IOS 6.

After upgrading to IOS 7, the only options Gmail gives using Safari or Mail app to attach a file are attaching a camera roll file or drawing a scribble. How can I attach a document such as a PDF or word file? I used to be able to do so using IOS 6.

skinb wrote:
Did you solve the problem? I am a new iphone user. Mac is less intuitive than wished.
You posted in the iPad forum instead of the iPhone forum. To get answers to your question, post in the proper forum. See https://discussions.apple.com/welcome
You tagged onto an older post. If you want an answer to your specific question, you need to create a new post. By creating a new post, you will receive emails when helpers post responses.
 Cheers, Tom

Show only contacts with phone

I have iPhone 5S and I have a lot contacts, but several of them don´t have phone number, only email.
I would like to show only contacts with phone number. Is it possible?

No.

I'm having problems with my internet since I have upgraded. I am afraid to upgrade on my Macbook pro now. I don't want the upgrade to slow down my laptops. Any suggestions?

I'm having problems with my internet since I have upgraded. I am afraid to upgrade on my Macbook pro now. I don't want the upgrade to slow down my laptops. Any suggestions?

Wifi issues are one of the common issues being reported by users. There is not much you can do at this point but wait and hope that th 10.8.1 update will address these issues.

Checking against Select-Options with "CP" using "IF value IN select_option"

Dear experts,
first of all: I'm sorry, if this question already should have been asked and answered!
I tried quite a lot of search terms but didn't find anything helpful.
We are using a statement like "IF value IN select_option" to perform comparisons after the Select-Options have been used in a SELECT statement. This logical expression fails (compared to the results of the DB-SELECT) whenever a select-option line contains the option CP (Contains Pattern). To be more specific: The case sensitivity of the LOW value doesn't seem to play a role any more. A variable with the value 'ABCD' would be positively checked against a select-option with OPTION 'CP' and LOW 'abc*', whereas this value wouldn't have been selected if the select-option had been used in a DB-SELECT.
Does anybody know a workaround?
Thanks in advance
Andreas

Dear Keshav,
it's an own field in an own table, defined as CHAR of length 140 (lowercase allowed), reflecting to a line of remittance info of an account statement. A regular Select-Option for this field is provided in a report which works perfectly fine regarding the case sensitivity. For reasons I don't want to point out in detail we need to check a value in this field against the select-option without selecting it from the db again.
Let's assume that a field remittance_info contains the value 'ABCD'.
A line of the select-option table looks like this:
select_option_table-SIGN = 'I'
select_option_table-OPTION = 'CP'
select_option_table-LOW = 'abc*'.
Then an ABAP statement such as
IF remittance_info IN select_option_table.
* would be true !!!
ENDIF.
but wouldn't deliver a result in a SELECT such as
SELECT * FROM my_table INTO TABLE my_internal_table WHERE remittance_info IN select_option_table.
because of the differences in lower/upper case.
regards
Andreas

Has anyone had a problem with their phone dialer since 4.3 upgrade?

My phone is useless unless I want to call someone from my contacts. As soon as I touch the phone app I get an error stating my contacts have stopped. I cant get this fixed. I've called Samsung and Verizon and tried all their suggestions and nothing works. The final suggestion from Verizon is to purchase a new phone a full cost because I'm not due for an upgrade until next year and I have a small crack in the corner of the screen so I'm not eligible for the trade in that the offer. They were kind enough to add that I can spread out the cost over a 1year period after I stated that a new phone would cost over $500. That is my only option at this point. Very frustrating, since I have been a customer for over 10 years! I signed the petition that is out there. Hopefully an upgrade comes soon to fix this upgrade.

see if this helps:
Re: Problem with OS 4.3 on Galaxy S4, key pad and dial a number does not work

Can no longer select text in email template or read only field with mouse using IE or Firefox?

Hi Guys,
I can no longer select text in email template or read only field using my mouse in IE or Firefox anymore. We are using CRM 2011 rollup 18 applied with IE 11 and the latest version of Firefox. We only applied roll up 18 in Feb when this issue began.
Thanks
Dave
David Kelly

When you have a problem with one particular site, a good "first thing to try" is clearing your Firefox cache and deleting your saved cookies for the site.
(1) Bypass Firefox's Cache
Use Ctrl+Shift+r to reload the page fresh from the server.
(You also can clear Firefox's cache completely using:
orange Firefox button ''or'' Tools menu > Options > Advanced
On the Network mini-tab > Cached Web Content : "Clear Now")
(2) Remove the site's cookies (save any pending work first) using either of these. While viewing a page on the site:
* right-click and choose View Page Info > Security > "View Cookies"
* Alt+t (open the classic Tools menu) > Page Info > Security > "View Cookies"
Then try reloading the page. Does that help?
These features rely on JavaScript, and it sounds as though you have scripting enabled if you get (the wrong) color changes. Some add-ons might alter the way scripts operate, so a standard diagnostic to bypass interference by extensions (and some custom settings) is to try Firefox's Safe Mode.
First, I recommend backing up your Firefox settings in case something goes wrong. See [[Backing up your information]]. (You can copy your entire Firefox profile folder somewhere outside of the Mozilla folder.)
Next, restart Firefox in Firefox's Safe Mode ([[Safe Mode]]) using
Help > Restart with Add-ons Disabled
In the dialog, click "Start in Safe Mode."
If those features work correctly, this points to one of your extensions or custom settings as the problem.
To also disable plugins, you can use this page:
orange Firefox button ''or'' classic Tools menu > Add-ons > Plugins category
Any change?

My screen blacks out during phone use.

Wondering if anyone else has had this issue ...yet.
Started on Friday 1/20 while watching a you tube video, thought it was going through a random reboot.
Screen barely powered on while trying to fix then randomly starts back up.
Happened again Saturday while on Facebook. Did a battery pull.
Then again Sunday using Facebook, once again.
Just curious though... anyone else?
Also, if I have to take it back to the store for the issue that should be covered by factory warranty are they good with in store switch of a new phone?
I used to get those when I had my En-V2
Don't know if smartphones have different ways...
Thanks

Limelemoneez, thank you for sharing your concerns with your device. I have not seen this issue with the Nexus so far. Since this seems to happen mostly when using the Browser and web applications, have you tried clearing cache from your Browser? If not, try this first. Open your Browser, press the 3 dots to go to Settings, choose Privacy & Security, clear cache. If you have installed any antivirus applications, please uninstall those. Also, if you notice this started after installing a new application, please uninstall that app also.
If this issue is still occurring, then I suggest completing a factory reset. This will erase all data from the device and reset to factory default settings. Since this phone does not have an SD card, I would recommend connecting to your computer to backup personal info like pictures, videos, etc. Also, check your Gmail account to make sure pictures backed up.
MarquiaF_VZW
Follow us on Twitter @VZWSupport

Over-ride concurrent prog noprint option with printer used in CheckPrinting

I would need to give a little bit of back ground on the Check printing process that we follow to explain my issue.
Check printing is done by 2 departments - AP and Treasury. AP selects invoices and runs the payments process while Treasury prints the check and confirms the payment.
Now the issue is when AP submits the payment process, the 'Format Payment Instructions' request gets submitted. Now the users in our AP department have their printer profile set to a default printer and copies set to 1. So for every concurrent request that they submit, the output is printed to this default printer. This has been working fine so far and also works for other requests submitted by the PPR. But the 'Format Payment Instructions' request has the check file in the output which gets printed in the printer from their profile option.
If the printer option is unchecked or default printer is set to noprint in the concurrent program definition of 'Format Payment Instructions' program, the check does not print at all. Even when the treasury submits the check for printing by selecting the printer. It does not work.
Is there anyway we could get the printing of checks by Treasury over ride the concurrent program definition or supress printing of checks by the 'Format Payment Instructions' program while being submitted by AP responsibility.
Any ideas/help on this would be great as we are going live with the upgrade now and would really need to address this issue.
Thanks!
Ramya

Hi TJ,
you are having definetely other issues, than the ones that might be caused by clrpfm of the tables above ...
But, based on that data, I do not know which ones ;-(
There are dynpro tables like dynpload or d3456t or so not proper ...
Regards
Volker Gueldenpfennig, consolut international ag
http://www.consolut.net - http://www.4soi.de - http://www.easymarketplace.de

Side volume buttons only work with phone

the side volume button on my 4S only works when talking on the phone. It will not work for music. Does anyone know why? There has been no water on this phone.

Re-insert a pair of headphones and remove them. Or restart the phone.

Is there anything setting or apps that can turn off the screen by covering the phone using cover case? just like ipad?

i am using a flip case and i am hoping that i can turn off the screen by covering my iphone case rather than pressing lock button. Just like ipad. any idea?

Sorry, no.

Trouble with phone ever since Denim update on Lumi...

Ever since my phone did the latest update, it has a mind of it's own. Cortana pops up for no reason, it freezes, and sometimes it acts like someone else is in control of my phone, opening apps that I didn't even touch, sliding the screen up and down. I am really getting frustrated with it. I even did a factory reset on my phone and it is still doing the same things, if not worse. Sometimes I have restart my phone 5-6 times in a row to get it to act 'normal' for at least a few minutes. Has anyone else been having these problems?

This problem has been reported numerous times on multiple sites and there is no resolution that I am aware of. Have tried it all. Lumia recovery, reduce sensitivity, disable background apps, disable glance screen etc etc. There are a fair number of users stating that this started after update so either we are all extremely unlucky to have hardware faults occur at the same point as an update or this is a software issue. Seems to me that there are too many people reporting this at point of software update for it to be a coincidence. Also its so random, sometimes get a few hours with no issues and others freezes several times an hour. Often putting the phone to stand by and back fixes the issue so not sure how this could be a problem with the digitizer. I love windows phone OS but this is the first phone I've had in a long long time to have problems and it has seriously put me off buying another keep hoping an update will be released to fix this but nobody seems to have any idea what is causing this so not very hopeful on that. Again there are far too many reports of this for it to be considered the users fault and yet they want us to pay to send it away. I've taken very good care of my phone and it doesn't have a mark on it so if this is a hardware issue it must be a design flaw. Totally gutted and my phone is barely useable at times.

Recently purchased HP 850 with Windows 8.1, unable to upgrade to Windows 10

I received my new HP ENVY Phoenix Desktop 850 (850-050qe CTO / M0K54AV#ABA) with Windows 8.1 (shown under Windows Edition). The shipping container states that this desktop is ready for Windows 10 upgrade. However, I do not see the "Get Windows 10" app on the toolbar. I have downloaded all available updates (recommended and optional), but there are two missing (KB2919442, and KB2919355). After reading through numerous articles, it seems that I need to install KB2919442 first before installing KB2919355, but when attempting to install KB2919442, I receive an error message "this update is not applicable to your system". Please advise!

Hello , Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More. I understand that you are not able to install Windows 10 on your computer as the KB2919442 update is not able to install correctly. I would be happy to assist you in this matter! To correct this issue, I recommend following the steps in thsi document on how to Use the System File Checker tool to repair missing or corrupted system files. This should help to scan for and repair missing or corrupt system files. I also suggest using the following resource on how to Fix Windows corruption errors by using the DISM or System Update Readiness tool, as well as Troubleshoot problems with installing updates. This should help to correct operating system corrupts preventing Windows updates and service packs from installing correctly. Please re-post with the results of your troubleshooting, and I look forward to your reply!
Regards

Problems with screen freeze with Adobe touch since 8.1 upgrade.

When reading a document my screen will freeze and go blurry at times, especially if my PC goes to sleep.
It seems to have started after I upgraded to 8.1, and yes my Adobe touch is up to date.

Although our team members have seen similar issues, we have not determined the root cause of the problem yet. It appears to be caused by graphics card driver failure or incompatibility with the Windows 8.1/RT 8.1 operating system after resuming from temporary suspension of an Windows Store app.
Have you seen this error message on your Windows 8.1 desktop when your device/PC "wakes up" from sleep?
So far, we have not seen the problem with Microsoft Surface RT / Surface Pro tablets and most PCs.
If you are willing to troubleshoot, could you update your graphics card driver to the latest version that supports Windows 8.1 to see if the problem still persists?
Thank you for your help.

"Clear Recents" screen only option with phone use since 4.1 upgrade.

Similar Messages

Maybe you are looking for