Clearing of oldest items first in FICA

Dear Friends,
My Utility client is implementing SAP-ISU.
Presently their Legacy system uses a "Balance Carryforward" functionality for clearing the open items.
The system simply clears the oldest bills outstanding for the Business partner with the Payments received.
So whether the customer pays through check/draft/direct memo instructions the system clears the oldest bills outstanding.
The same functionality is required in SAP.
Their is no requirement for assignment criteria for clearing of payments say check number/bill number,etc except the Customer's Contract a/c.
SAP suggests clearing of Outstanding bills through Payment lots/ Check lots/card lots using assignment criteria.
Please let me know how i can have payment clearing with this 'oldest bill first' clearing functionality in SAP.
Also request to please send me your phone numbers so that i can contact you for seeking help.
Thanks and Regards,

Hi Priyank,
The clearing of items in first in first out basis can be done through clearing control.
You have to do the settings in the follwing path.
IMG -> Financial Accounting (New) -> Contract Accounts Receivable and Payable -> Basic Functions -> Open Item Management -> Clearing Control -> Define Clearing Variants
Hope it will be useful to you.
Regards,
Bodhayan

Similar Messages

Unable to clear vendor open item.

Hi experts,
Have posted vendor document under document type KZ directly, there is no open item invoice to clear the document.
posted entry as below. now we are unable to clear the open item document through F-44. we did not find open item for the posted document which is posted in document type KZ.
Vendor account entry
25 vendor account 10000
38 vendor account 8000
50 bank account 2000
document has been cleared only 8000 not 2000. Please advice me how to clear the KZ document.
Regards,
Anji Reddy.

HI Anji Reddy,
There is some Process to do Clearing function
first of all Open item should be there in Vendor account with the Invoice.
For that invoice there should be a payment which is full payment or else Partial Pament.
Then you can do clearing function to clear the Open items.
Through F-51 you can do both Payment and clearing which is Post with clearing
if you have done payment throgh any other Tcodes you have to come F-44 and do mannual Clearing.
Try to explain your senario more Clear so that your doubt can solve
Regards
Mahesh

Clearing of Open items - Critera - Auotomatic Payment Run

Dear Friends,
We have configured the Automatic Payment Run in the system and are in the process of maintaining the integration with the Bank. When we import the Electronic Bank Statement, we find that instaed of 'Value Date' some otehr reference gets populated in the assignment field in the line item for Bank Clearing Account, thus rendering it difficult to perform automatic clearing of open items. The first question is how to check what information is getting populated and why? Is there a way to find it out ?
Another thing is that we have been advised to maintain the substitution rule so that instead of some other reference, the Value Date gets substituted in the Assignment Field? Need the help of experts in finding out which information gets populated in the Assignment Field and second what is the method and config maintainence required for defining the Substitution Rule so that the Value Date gets captuerd in the Assignment Feild and which would help in perfroming the automatic clearing of open items.
Thanks in advance!
Regards,

Hi,
Thanks for the prompt response. In FF.5 while importing the Bank Statement, the box for "Assign Value Date" was checked and in the GL Master of the Bank Clearing Account, the Sort Key has also been defined as 027 (Value Date). Even then in the line item posting for Bank Clearing Account, the reference from Document Header Text (Field Name BKTXT) gets populated in the Assignment Feild. Now the issue is that this field needs to be substituted with the value date. How to define the Substitution Rule? Another issue is what should be the second criteria defined in the system for clearing the Open Items in the Bank Clearing Account, since for the same value date there could be two identical items and only one may be cleared from the bank and other one may be outstanding?
Help from experts who have configured e banking would be highly appreciated.
Thanks!
Regards

EBS posting to clear customer open items - Function not working?

Hello SAPers
I have an issue I just canu2019t seem to resolve! We are receiving MT940 statements and receive customer invoice reference details with field: 86 as follows:
:61:090910C1500,00FOSB1000270 //100909050      0        035315
:86:DEPOSIT
Remitter:1000270 MISSION AUSTRALIA   Ref:1200000017
Immediately following the BTC FOSB the bank quotes the customer number however I am not using this as standard SAP should identify the customer by document number within the note to payee field?
I am using a 2 step process in posting to the clearing account and customer. Config as follows:
Pst Type 1
40     Bank
50     Clearing
Pst type 2
40     Clearing
15     BLANK          DZ     3      15
I have also set up a string to look for the documents ^(12########)$. When we load the statement the first posting is successful however the second does not post to the customer or clear based on the invoice reference. I am using algorithm 020. The error that occurs is F5 102 Customer does not exist in company code xxxx. It actually does exist in the company code.
I have loaded the EBS to the buffer and simulated the search on BELNR and it picks up the document?
I am sure this is standard and a CMOD is not required on this type of functionality? What have I not done to allow posting to the customer based on document number or to post on account where it is not cleared?
Any assistance on this issue is appreciated? Thanks in advance.

Function Module for GL open Items
how to clear customer open items by another customer open item
Function Module for GL Open Items
Reward points..

Clearing customer open items

Hello!
Can anybody help to find a way how to clear customer open items when there is no reference number in use for customer. In electronic bank statemen there is only billing document number in TXT field. How to configure "Make Global Settings for Electronic Bank Statement" and "Define Search String for Electronic Bank Statement" for that purpose.
With all the best,
Merlin

Hello,
IMG => Financial Accounting => Bank Accounting => Business Transactions => Payment Transactions => Electronic Bank Statement => Make Global Settings for Electronic Bank Statement
Give your chart of Accounts
1. Create your account symbols
Create freely definable account symbols. Make sure that you are able to identify them when you are configuring in future steps.
2. Assigning Accounts to Account Symbols
Here you need to assign the account symbols to GL Accounts or you need to use masking logic. You must have designed your accounts in such a way that the end digits will work for posting the entries to FI. Account Modifier you use as + and use your local currency, if you do not have any foreign currency postings.
3. Create Posting Rules
Create freely definable posting rules.
4. Define Posting Rules (This is the most important configuration for your FI Postings / Clearings)
a) For all the payments you need to create the entries for posting area 1
b) For all the receipt you need to create the entries for posting area 1 and 2
c) Use the document type DZ in case if you want to clear the items. Use Posting type 8. If the invoice number is there in the reference field of bank statement, automatically the same will be selected by the system and cleared.
d) If you want just only entries to be posted use posting type 1.
e) If you want to clear the check, then use the posting type 4.
f) Configure according to the entries to be posted.
g) If you are going for clearing something the offsetting debit / offsetting credit (as the case may be) need not be given.
5. Create Transaction Type
Create freely definable Transaction Type
Select the transaction type and assign the external transactions to your posting rules.
For outgoing check use 13 as Interpretation Algorithm and 1 as the processing type.
Remaining all case use 1 (Standard algorithm) and 5 as the processing type.
Please also go through the below mentioned note in case if you are required to use further available interpretation algorithms or processing types.
6. Assign Bank Accounts to Transaction Types:
You need enter the Bank Key / Bank Account / Transaction type here.
You can get the the bank key and bank account details from table T012K (Go to SE16)
Further supplementary notes may be useful to you:
There are different programs to upload electronic bank statement.
FF.5 or FF_5.
I think your case Multicash format you are using.
You need have three files in FF.5 and two files in FF_5
You can prepare a Z program in order to truncate the electronic bank statement into two or three part files and save them on the application server.
1. Take all the external codes list from bank.
2. Take any available documentation from the Bank describing the relevance of the external codes.
3. Make sure that your Chart of Accounts (Bank Accounts) last digits logic is appropriate to meet the requirements.
4. Based on this decide the Account Symbols that are required to be created.
5. Make sure that the masking rules are configured properly.
6. Decide the posting rules that needs to be created.
7. Link up your external symbols provided by the bank with Posting rules and give proper algorithms for posting and clearing logic.
6. Concentrate on the posting areas to be posted while uploading the bank statement.
Further explanation would help you to understand the functionality when uploaded the electronic bank statement.
Main purpose of uploading the bank statement into SAP is to make your Bank Main Account and physical bank statement balance in sync.
You do not have any traditional Bank Reconciliation Statement (BRS) report in SAP.
SAP is normally you maintain bank main account and bank sub account. Whenever you make a payment through F-53 or F-58 or F110, the entry would be:
Vendor Account Dr
To Bank Sub Account
The ending digits of the sub-account would be important in configuring the masking rule. Based on this masking rule when you upload the bank statement the entry the system would pass is:
Bank Sub Account Dr
To Bank Main Account
It depends on the configuration, either the sub account will be cleared by the system automatically or you need to run F.13 to clear the sub accounts.
At the time of receipts, you have different accounting entries unlike payments. It needs to post to two posting areas. 1. GL Accounting 2. Sub-Ledger Accounting
The entries would system itself pass is:
Bank Main Account Dr
To Bank Sub Account
Bank Sub Account Dr
To Cutomer account.
Clearing logic mentioned for your posting rules and the alogrithm used for your external bank symbols will also play pivotal role in clearing the accounts.
Ideally you will use
FF67 / FF.5 / FF_5 for uploading manual or electronic bank statement
FEBA / FEBA_BANK_STATEMENT is used for furthe rprocessing.
GO THROUGH SAP NOTE 48854
Please go through SAP Note. 48854. You will get an idea regarding the functionality of the algorithms.
Though this note is in relevant to GB specific, you will find this very useful.
description follows below regarding the normal procedure for maintaining table T028G. Due to the different bank codes and posting rules, pre-Customizing is not possible at this point.
The following processing types are available - unless stated otherwise, you should use the interpretation algorithm: '000 - No interpretation' in each case.
1. '00': There is no processing. The entry line is ignored.
2. '01': A validation is made whether an entry exists for the transferred check number in the check table (PAYR). The check number and payment document number are transferred for further processing. Interpretation algorithm: outgoing check processing '011'-'013'; the update in the check file is via the interpretation algorithm.
3. '02': Transfer of the ending balance to the electronic bank statement
4. '03': Transfer of the opening balance to the electronic bank statement
5. '04': Clearing via the allocation number which is delivered with the bank statement. No interpretation algorithm.
6. '05': Clearing of BACS payments or BACS bank collection. The reference text field is first read to ascertain whether it involves payments initiated by users or bank collection via BACS. Providing it does involve a cash transaction initiated by the user, the payment document numbers concerned are determined via the reference number and transferred as a reference to further processing. Interpretation algorithm: '000 - No interpretation' or '019 - Reference number DME'.
Note
To differentiate between the two procedures in table T028G, you have to maintain two separate entries.
Example: the bank uses bank code '62' for cash receipts and for BACS bank collection.
Ext. Transaction +/- sign Posting rule Int. Algorithm Processing type 62 + GB62 001 5
62 SAPBACS + GB63 000 5
7. '06': Bank costs or interest revenues
Recommended interpretation algorithm: '000 - No interpretation'
8. '07': Total amount of cash disbursements
9. '08': Total amount of cash receipts
10. '09': Items not paid
Recommended interpretation algorithm: '000 - No interpretation'
Regards,
Ravi

Clear older open items which is posted

Hi
We are trying to clear GR/IR open items, but the issue is GL Account earlier was not open item, and later it changed to open item. now the problem is earlier items which were posted is not getting clear as they are not showing as a red or open items, Can someone help me to how to clear this older items now?
Many thanks in advance.
Natashaa

Dear Natashaa,
Its surprising that you were able to modify an exisitng account from non-open item managed to Open Item Managed with balance it.
Please see below standard SAP Message which you should have received. while changing Open Item Management Tick in existing G/L Account.
Could you please answer how you were able to modify the G/L Account with Open Item when there was a balance in it.
You cannot change the open item management setting; (see long text)
    Message no. FH087
Diagnosis
    This account does not have a balance of zero.
System Response
    You cannot switch the open item management specification on or off with
    this transaction.
Procedure
    If you want to switch this function on retroactively for a certain
    account, you should create a new account with the correct setting and
    use this to make a transfer posting of existing items.
    If you want to switch off the open item management function
    retroactively for an account, you must first clear all the postings
    currently on this account. You cannot make any changes to the account
    management method until this is done.

How to show a blank or clear cell for the first entry in a numbers pop-up menu on a mac. I can do it on the iPad but not on the mac. Thank you.

Can you please advise how to show a blank or clear cell as the first option in a pop -up menu on a Mac, I can see how on an IPad but but not on the Mac.
Thank you.

Hi grm,
Yvan Koenig wrote an Applescript to create an popup menu with a true blank menu item. You can find it in Yvan's Box Account public area. Click on for_iWork'09, then for-numbers'09, then look for and download popup_with_nil.zip. Unzip the file, then open it with ScriptEditor.
Yvan's scripts include instructions (in French and English) on how and where to save the script and how to use it. I haven't read this one recently, so I can't give you any further details on it.
Regards,
Barry

Clearing of open items of Vendor or Customer by FIFO method

Dear Experts
All debit and credit entries on a customers or vendor account has to be cleared automatically. Now i want to clear the open items using FIFO procedure, that is credit entries on a customers account will be cleared against the oldest open invoice. The open items will be automatically matched by the system based on available credit.
Does anyone have had a similar issue? I
Thanks
Ravi Sankar N D

Hi Ravi,
SAP will pick these invoices for payment according to vendor open items which are due according to payment terms.
When it comes to customer invoices, clearing depends on when customer pays payment to particular invoice, these customer invoices will get cleared.
I assume you are talking more closely to intercompany scenario (If it is not intercompany invoices clearing, you should not worry mostly about customer invoices clearing), where you want to clear vendor invoices and customer invoices. So you need to incorporate entry date in your functionality to pick intercompany invoices clearing.
Thanks much
Raghu Kolla

Clear_document FM not working to clear customer open item.

Hi Experts,
1) I need to develop a report to clear the customer open items, the report has to display whether the Customer open items cleared or not?
     As we do f-30 transaction to clear documents.
   I have developed the report in this ways but its not clearing.
    a) First I have posted the document through   'BAPI_ACC_DOCUMENT_POST
    I have filled the document in the below way. The Bapi returning OBJ_KEY value also.
LOOP AT it_data INTO wa_data.
****Fill DOCUMENTHEADER
    wa_docmentheader-doc_type     = 'DA'.   "doc type
    wa_docmentheader-doc_date    = wa_data-bldat.   "doc. date
    wa_docmentheader-pstng_date = wa_data-budat.   "posting date
    wa_docmentheader-comp_code   = wa_data-bukrs.   "company code
    wa_docmentheader-ref_doc_no = wa_data-belnr.   "Reference
    wa_docmentheader-header_txt = wa_data-bktxt . "Header Text
    wa_docmentheader-username    = sy-uname.        "user name
****Fill ACCOUNTGL Table
    wa_gl-itemno_acc = l_no.
    wa_gl-gl_account = 2909509----" which i marked in the screen second red color(ACCount).
    wa_gl-alloc_nmbr = wa_data-xref2.
    APPEND wa_gl TO it_gl.
    CLEAR wa_gl.
****Fill ACCOUNTRECEIVABLE
    wa_receivable-itemno_acc = l_no + 1.
    wa_receivable-customer = wa_data-kunnr.
    wa_receivable-gl_account = wa_data-saknr.
    wa_receivable-alloc_nmbr = wa_data-xref2.
    APPEND wa_receivable TO it_receivable.
    CLEAR wa_receivable.
****Fill CURRENCYAMOUNT
    wa_currencyamount-itemno_acc = l_no.
    wa_currencyamount-currency = wa_data-waers.
    wa_currencyamount-amt_doccur = wa_data-dmbtr.
    APPEND wa_currencyamount TO it_currencyamount.
    CLEAR wa_currencyamount.
    wa_currencyamount-itemno_acc = l_no + 1.
    wa_currencyamount-currency = wa_data-waers.
    wa_currencyamount-amt_doccur = wa_data-dmbtr.
    wa_currencyamount-amt_doccur = wa_currencyamount-amt_doccur * -1.
    APPEND wa_currencyamount TO it_currencyamount.
    CLEAR wa_currencyamount.
CALL FUNCTION 'BAPI_ACC_DOCUMENT_POST'
EXPORTING
documentheader
= wa_docmentheader
IMPORTING
OBJ_TYPE
=
obj_key
= lv_obj_key
OBJ_SYS
=
TABLES
accountgl
= it_gl
accountreceivable = it_receivable
ACCOUNTPAYABLE
=
ACCOUNTTAX
=
currencyamount
= it_currencyamount
return
= it_return.
EXTENSION2
=
endloop.
2) After posting the document am using Clear_document to clear the document
   am filling the Clear_Document in the below way.
1. a)get belnr, bukrs, gjahr & buzei from bsid table for invoice and append to T_AUSZ1
    b)T_AUSZ1-BUKRS, 'A', OBJ_KEY+0(10)(which you get from BAPI_ACC_DOCUMENT_POST bapi), posting date, posting date year pass it to T_AUSZ2-BUKRS, T_AUSZ2-AKTIO, T_AUSZ2-AUGBL, T_AUSZ2-AUGDT & T_AUSZ2-AUGGJ and append it.
2. a)get BELNR, BUKRS, GJAHR, BLART & BUDAT from bkpf where awkey = OBJ_KEY(which you get from BAPI_ACC_DOCUMENT_POST bapi)
b) get belnr, bukrs, gjahr & buzei from bsid table where BELNR EQ bkpf-BELNR AND
                      ZUONR EQbkpf-BELNR AND
                      BLART EQ bkpf-BLART AND
                      GJAHR EQ bkpf-GJAHR AND
                      BUDAT EQ bkpf-BUDAT
and append to T_AUSZ1
c) T_AUSZ1-BUKRS, 'A', OBJ_KEY+0(10)(which you get from BAPI_ACC_DOCUMENT_POST bapi), posting date, posting date year pass it to T_AUSZ2-BUKRS, T_AUSZ2-AKTIO, T_AUSZ2-AUGBL, T_AUSZ2-AUGDT & T_AUSZ2-AUGGJ and append it.
delete duplicates from T_AUSZ2.
3) but am not able to clear the document using Clear_document Function Module
4)I am able to post the document through BAPI_ACC_DCUMENT_POST
5)Please tell me how to clear the document.

Hi Sunny,
Please see the following :
1. Down Payment Received (2500 INR.) F-29
2. Customer Invoice Posted (2500 INR.) FB70
3. Clear Down Payment (2500 INR) F-39
4. Now Run Automatic Clearing (F.13)
And then check the Customer line item report in FBL5N. It will clear both line items.
Hope this helps.
Kind Regards,
Prakash Kumar

Exchange Rate Differences when clearing a bank item

Hi everyone,
I'm having a problem when I try to clear a bank item with the bank statement because the document is creating two exchange rate differences, first one debiting to loss account and the other one credting to gain account. I'm not pretty sure if this behavior is the right one but It does not make any sense to me.
I'll detail step by step the process I'm following:
Example:
1.- I create an invoice with an exchange rate type of 15
2.- Then I make the incoming payment with an exchange rate type of 16 (This causes an exchange rate item that is correct for me. Exchange rate Item is for 10 usd)
3.- Then I try to clear the bank item created (same exchange rate than the incoming payment = 16), and now document creates two exchange rate items, the first one debiting to loss account for 10 usd and the second one crediting to gain account for 10 usd.
Could you please help me in order to know if this is ok?
I really appreciate your help
Thanks in advance
Best Regards
Manuel Nieto

Hi everyone,
Thanks everyone for your replies. I've realized what's happening, and its related to document split. Because as bank item in incoming payment was splitted, when I try to clear this item ,split happens again no matter if at clearing point exchange rate type is the same as in the incoming payment, that's the reason of the two items one debiting and one crediting for the same amount.
Thanks very much
Best Regards and thanks for your help.
Manuel Nieto

AppleScript: Move the oldest Item of a folder

Hi,
i'm a newbie in AppleScript and trying to get my simple Script running, but it doesn't want.
The Script should look into "Folder_1" and should move only the OLDEST Item (File or Subfolder) in this Folder to another directory called "Folder_2"
But this is not running, some Ideas?
Code:
tell application "Finder"
activate
set sourceFolder to "System:Users:Administrator:Desktop:Folder_1"
set destinationFolder to "System:Users:Administrator:Desktop:Folder_2"
move oldest item 1 of folder sourceFolder to folder destinationFolder
end tell
Any Ideas?
It would be nice if someone can assist me in my first steps.

Better formatted:
set homePath to (path to home folder) as text
tell application "Finder"
     set sourceFolder to folder (homePath & "Desktop:Folder_1")
     set destinationFolder to folder (homePath & "Desktop:Folder_2")
     set creationDates to creation date of items of sourceFolder
     -- Which item is the oldest?
     set theOldestDate to item 1 of creationDates
     set j to 1
     repeat with i from 1 to count creationDates
           set thisDate to item i of creationDates
           if thisDate < theOldestDate then
                 set theOldestDate to thisDate
                 set j to i
           end if
     end repeat
     move item j of sourceFolder to destinationFolder
end tell

How to ignore credit amounts in oldest item credit check

Hi,
We've had an order that got put on hold because of the oldest item credit check. The item is older than 15 days (our configuration setting), but the item is a credit memo, not an invoice. Is there anyone to change this credit check so it will only block oldest items that have a debit amount?
Thanks in advance!
Karla

Thanks....
Anyway, I have to wait till the Credit Card's bank process and recorded formally in their list, then I can only delete the master card in my phone. Well, habe to delete the card in Microsoft website first, then i can only delete it in my phone after a few time "refresh"
Thanks for ur help
Happy CNY

Programmatically clearing an input item does not work

Hello,
I want to clear one input item (RichInputListOfValues) contained in a PanelForm programmatically, after the user presses on the "Clear" button:
<af:commandToolbarButton text="Clear" id="ctb1"
actionListener="#{pageFlowScope.UiBindings.clearItem}"/>Where the code that should really clear the item is:
    public void clearItem(ActionEvent actionEvent) {
            getItem().setValue(null);
            // getItem().resetValue(); // even with this, it does not work.
            AdfFacesContext.getCurrentInstance().addPartialTarget(getItem());
    public RichInputListOfValues getItem() {
        return item;
    }However, the above does not clear the item on the page. I have to click a second time to actually see the item empty as expected.
The problem still appears if I also do addPartialTarget() on the PanelForm container.
Do you have any idea?

My test case:
JDeveloper 11.1.2.2
page:
<?xml version='1.0' encoding='UTF-8'?>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<f:view xmlns:f="http://java.sun.com/jsf/core" xmlns:af="http://xmlns.oracle.com/adf/faces/rich">
    <af:document title="untitled1.jsf" id="d1">
        <af:form id="f1">
            <af:toolbar id="t1">
                <af:commandToolbarButton text="Clear" id="ctb1" actionListener="#{viewScope.myBean.clear}"/>
            </af:toolbar>
            <af:inputListOfValues label="Label 1" popupTitle="Search and Result Dialog" id="ilov1"
                                  binding="#{viewScope.myBean.item}"/>
        </af:form>
    </af:document>
</f:view>bean:
package view;
import javax.faces.event.ActionEvent;
import oracle.adf.view.rich.component.rich.input.RichInputListOfValues;
import oracle.adf.view.rich.context.AdfFacesContext;
public class myBean
private RichInputListOfValues item;
public myBean()
public void setItem(RichInputListOfValues item)
    this.item = item;
public RichInputListOfValues getItem()
    return item;
public void clear(ActionEvent actionEvent)
    getItem().setValue(null);
    AdfFacesContext.getCurrentInstance().addPartialTarget(getItem());
}config:
<?xml version="1.0" encoding="windows-1252" ?>
<adfc-config xmlns="http://xmlns.oracle.com/adf/controller" version="1.2">
<managed-bean id="__1">
    <managed-bean-name>myBean</managed-bean-name>
    <managed-bean-class>view.myBean</managed-bean-class>
    <managed-bean-scope>view</managed-bean-scope>
</managed-bean>
</adfc-config>It works fine on the first click. Something's not right on your end :)
John

Possible to clear vendor open item against already posted payment document?

Hi
Can you advise if it is possible to clear an open item against already posted payment/clearing doc? Here is the background to the scenario:
An invoice was posted with transaction FB60. This was subsequently picked up in the payment run F110 and cleared by payment document number 200005678. The item went to the bank on the paymnet file and was paid out to the vendor. The transaction reference, which appeared on the incoming bank statemnet was the payment document number 200005678.
Subsequently it was discovered that the original invoice should have been posted with reference to a PO using MIRO. The requirement now is to reverse the paymnet documnet 200005678 in SAP, then reverse the document that was posted using FB60. After this the invoice will be posted using MIRO. This will create an open item on the vendor account.
This item will not be piad out again. Therefore the requirement is to try clear that open item against the previously posted payment document 200005678.
Is there any way to clear this vendor open item against the originally posted payment document 200005678?? Or any other advice on how this scenario can be handled in SAP?
Thank for your help.
Mike

Hi,
I tried that option in our test system. I ran FBRA and entered Paymnet Documnet Number (+Clearing Doc Number), Company Code, Fiscal Year.
Then chose menu option Clearing -> Reset Cleared Items.
The system pops up a window asking for a reversal reason and reversal date. I use 01 and posting date of today.
The system now posts another cleared document. That document places the invoice as an open item on the vendor account. It does not place the Payment Document as an open item on the account.
When I go to F-44 only the open vendor invoice is showing there. There is no open paymnet document.
Is there perhaps some configuration setting that stops the placement of the paymnet document as an open item when reset?
Thanks for your help again.

Clear vendor open items

Hi Gurus,
I'm archiving FI vendor and customer documents for a company that is not more used in the system. But I need to clear all open items that I can see in FBL1N (and FBL5N).
Does someone knows if there is a way to clear ALL vendor/customer open items? Pratically I need a FB05 that can be use for lots of vendors/customers.
Have you got any ideas?
Thanks,
Marco
Message was edited by:
Marco Vismara

Hi Marco,
This is a topic which is often discussed. As I know, there is no way to 'mass' close the open items.
You could explore the possibility of disabling the Open Item Management for the acconts for that comapany, if the accounts are not being used by other companies.
Hope this helps,
Naveen

Clearing of oldest items first in FICA

Similar Messages

Maybe you are looking for