Client Configuration Tool

What is the real purpose of this software client applicaiton?
Do you run it from each desktop before installing CAD or Supervisor?
If you are upgrading from one verison to the next, do you need to run it again?

It would appear that the only purpose to running it, is to configure it for your environment, so that your users do not have to enter any settings to make it work, when they install it. E.g., Your users are installing CAD on their own, and they get asked for the primary and secondary node IP Addresses. They probably wont know that.
If you are wondering how an Agent can install CAD on their own, then check out this URL in your environment:
https://:8443/appuser/Download?request_type=download.icd
I wont say that you do or don't have to run it for every upgrade. Refer to the upgrade or release notes for your version to find that information. It may change from one version to the next. Generally speaking you do have to run it though.
Anthony Holloway
Please use the star ratings to help drive great content to the top of searches.

Similar Messages

ID: How to use the test Configuration tool

Hi all,
I have done one simple file2file scenario and it is working fine( source file is reaching the destination).
By using this scenario, i would like to know the use of test configuration.( which is in Integration Directory).
I have given the input parameters what it has asked.
Header details:-
sender service,sender message interface and namespace.
payload:-
xml format( taken from message mapping)
log result:-
Sender Agreement
Internal Error
HTTP connection to ABAP Runtime failed. Error: 403 Forbidden URL: http://xxxxx:8000/sap/xi/simulation?sap-client=000 User: XIDIRUSER
Please help me how to work with this tool.
Regards,
Deviprasad.

hi deviprasad...even i face the same problem whenever i tried using test configuration tool...
i think it means...its trying to make a connection : HTTP connection to ABAP Runtime ......which fails due to lack of proper authorization...
if u login to ur integration builder with a user having the proper authoriztion(i dont know exactly)...u can do the test..... coz during the test there is a connection between java and abap stack...
pls rectify me and convey me if u get the proper answer....or if i m wrong..
pls try to do use the test after login to IB through a user with maximum authorization....

Oracle 11g client Configuration

Hi All,
I have Oracle 11g Server installed on my Linux box.
I want to use Oracle client 11g on my windowsXP access to the Server that on my linux box.
when i go to "Oracle-oraClient11g_home1","Configuration and Migration Tools", "Administration Assistant for Windows". I couldn't find the server that i want to add.
Here is my client configuration on my windowsXP:
tnsnames file
# tnsnames.ora Network Configuration File: C:\app\msokadmin\product\11.1.0\client_1\network\admin\tnsnames.ora
# Generated by Oracle configuration tools.
ORACLE =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = "myoracle server name")(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = orcl)
listener file:
# listener.ora Network Configuration File: C:\app\msokadmin\product\11.1.0\client_1\network\admin\listener.ora
# Generated by Oracle configuration tools.
LISTENER =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = "it's my client Machine")(PORT = 1521))
Sqlnet file:
# sqlnet.ora Network Configuration File: C:\app\msokadmin\product\11.1.0\client_1\network\admin\sqlnet.ora
# Generated by Oracle configuration tools.
# This file is actually generated by netca. But if customers choose to
# install "Software Only", this file wont exist and without the native
# authentication, they will not be able to connect to the database on NT.
SQLNET.AUTHENTICATION_SERVICES= (NTS)
NAMES.DIRECTORY_PATH= (EZCONNECT, TNSNAMES)
My windowXp is joined to the domain (ex. zzz domain).
Anyone who know and can help me about this, it will great.
Thanks to forum.
Marin

1. On your Oracle client side, you don't need listener.ora file
2. If you want to configure TNS Names on client, you run "Net Configuration Assistant" not "Administration Assistant for Windows"
3. You will not see a server drop down list like SQL Server did. No matter your join the domain or not. You need to enter the server hostname, port and Service name manually.

Multi Client Configuration

Hi Guys,
I have installed OBI Server.
Now I have 3 developers who will work over RPDs.
I have installed client tool on all the developers machines.
I want all the clients to be configured to my server. i.e. When the Client Administration Tool is opened up by the developer, It should point to the same online repository that Server Administration Tool is pointing to.
What configurations do i need to change for this?
Thanks
Saurabh

Hi Saurabh,
Use the following approach:-
1. On the client machines, create system ODBC connections to point to the DNS/IP Address on the OBI Admin server machine. The driver used should be 'Oracle BI Server'. Say the name of the connction is Analytics_Server.
2. While opening the online RPD from client machines choose 'Analytics_Server' as the connection. (the popup will display two entries 'AnalyticsWeb' and 'Analytics_Server' )
This will connect you to the RPD on the server machine.
Regards,
Sudarshana

Remote configuration tool.

Dell has a downloadable tool called: DCCU Dell Client Configuration Utility. When you run this it lets you create an exe file that can be run on any Dell machine to make changes to the BIOS settings. I used it with a remotely deployed script to enable the Wake on Lan setting in the Bios. I was hoping IBM or Lenovo might have something similar. Some sort of remote management software for enabling Wake On Lan. I read a little about LCCM: LanClient Control Manager but none of its links are active anymore. Any help or redirection would be greatly appreciated.

Hi,
try this link:
http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-70569
Download the file called scripts.zip using that you can configure the system.
Start the file called: "ListAll.vbs" => it will show you all the configuration, that is set; In the same time it will show you the name of the Wake on Lan script, that you can use to configure the systems.
Use the file called "SetConfig.vbs" in conjuction with the name and the configuration that you want to have on the machine.
Example:
SetConfig.vbs %nameOfTheProcess% Disabled
This configuraition is different by couple systems, so it would help, if you can tell me, what all systems will be changed using this configuraiton files?
NOTE: This files can not be distributed to end clients, as the missuse of them might root into unexpected behaviour.
Rgrds

SCCM and Windows Update Client Configuration

Hello,
I am in the process of migrating SCCM 2007 client over to a new SCCM 2012 R2 site.
I deleted the AD site from 2007 and added it to 2012 and the client is pushed via Client Push. The client upgrades fine and things go well but
I run into a little problem after the client is installed.
Basically it seems to be an issue with how SCCM interacts with and controls Windows Update settings on the SCCM client. I ran into a somewhat of a major issue that caused
all (or many) of the newly upgraded clients to go the internet to download updates from Microsoft shortly after the move from the 2007 site and client upgrade to 2012. This was because the client (or at least the ones I checked) had their WU settings to “Always
download and install” (or something similar). Obviously, expected behavior with this setting, but the question is how did it get this way?
Does SCCM control any of these settings? I know it take over the WSUS settings, etc, but I didn’t think it does anything with the WU client itself.
From my understanding the WU client settings are done via GPO (local or domain) or WU setting and SCCM does not control these settings.
I’m not looking for you to solve the problem, because it’s quite tedious, I’m just hoping that someone can lead me in the right direction to find out what if any WU settings
are controlled or changed by SCCM 2007 or 2012.
Thanks
Angelo
Angelo

Thanks for the extra info, Idan. I should probably admit that I am an AD admin and SCCM is handled by someone else in my department. My main issue with the LocalGPO is the Event 1096 corruption that causes all admin template settings to revert
to defaults - currently happening on over 100 workstations in our environment. 100% of these problems are caused by LocalGPO corruption and nothing else. And we will pursue resolution of this issue with Microsoft because we agree that resolving
this problem is the primary goal.
But for the sake of understanding: We don't have any non-domain members that need to be managed by SCCM. If we had a policy stating "no SCCM client configurations resulting in a LocalGPO file are to be implemented in production - all are
to be done via Domain Group Policy," is it possible to eliminate the LocalGPO entirely? Or will there always be a LocalGPO file regardless of whether or not there are settings visible from it in a gpresult report? We would not need to match
SCCM configurations in Domain Group Policy because we would not make any changes to the SCCM client resulting in a LocalGPO file at all. The slow link detection is not of concern to us because none of these settings that would not apply in this case
are SCCM-managed via LocalGPO (as far as I know):
http://blogs.technet.com/b/musings_of_a_technical_tam/archive/2012/02/27/gpos-and-slow-link-detection.aspx
Another reason why I would prefer to do these settings in Domain Group Policy is that we have Advanced Group Policy Management installed in our environment, which is subject to our Change/Release process. We can track the changes being made to clients
much more easily when they are done via AGPM. Any changes that we want to make via SCCM client could be tested first to see how LocalGPO is effected, and then those changes could be made via Domain Group Policy instead in production.
Given this info, I'm still struggling to understand why it is recommended to implement anything via SCCM client configurations resulting in a LocalGPO file. So far, the only compelling reason is that management of non-domain members is not possible
via Domain Group Policy, but that doesn't apply to our environment. Is it recommended mostly for ease of administration, so that an SCCM admin doesn't need to work with another tool (Domain Group Policy)? Any extra reasoning for this recommendation
that anyone can provide is much appreciated!

How can I Create a Client Configuration File for RemoteApp and Desktop Connection with Server 2012?

I have a working RDS RemoteApp site and looking to test out the feature in Windows 7 Control Panel\All Control Panel Items\RemoteApp and Desktop Connections
I came across this link: Create a Client Configuration File for RemoteApp and Desktop Connection and I believe this is what I need to do first, but these instructions are for
Server 2008, and I'm running 2012.
Any suggestions or tips on how I can begin testing this with Server 2012?

Hi,
You can manually enter the path to the 2012 feed and it will connect and download the RemoteApps and Desktop connections.
If you need a sample .wcx file I have posted one here a couple of times. If you want I will look for it and post a link.
-TP
I tried adding my URL's below, these are sample links that work for me right now for when I log into the web page, but neither of these work. And I'm not sure what I would need to do with or how to create a .wcx file.
When I type in my URL of: https://connect.mydomain.org/RDWeb, I get redirected to:
https://connect.mydomain.org/RDWeb/Pages/en-US/login.aspx?ReturnUrl=/RDWeb/Pages/en-US/Default.aspx

Error while crawling LOB contents in SP 2013:'Could not find default endpoint element that references contract in the ServiceModel client configuration section

Hi,
I created custom BDC Model using Visual Studio. In ReadList method i am getting data using Web Service call. Using this External Content Type (BDC Model) i created one external list and it is populating with data.
I created one new content source in search service application using this BDC Model and when crawled this content source i am getting the below error.
Error while crawling LOB contents. ( Error caused by exception: Microsoft.BusinessData.Runtime.RuntimeException MethodInstance with Name 'ReadList' on Entity (External Content Type) with Name 'Entity1' in Namespace 'bcsex.BdcModel1' failed
unexpectedly. The failure occurred in method 'ReadList' defined in class 'bcsex.BdcModel1.EntityService1' with the message 'Could not find default endpoint element that references contract 'ServiceReference1.Service1Soap' in the ServiceModel client configuration
section.
I included the bindings and client end point configuration settings in web.config file located at
\\Inetpub\wwwroot\wss\VirtualDirectories\Port_Number, but still getting the same error.
Please help. Thanks a lot.

The Issue resolved by including the bindings and client end point configuration settings in
machine.config file located at C:\Windows\Microsoft.NET\Framework64\v4.0.30319\Config\ and also restarted the server after config changes.

Oracle 8i Configuration Tools Fails on Install

I found problems on the Oracle 8i Installation, on my Windows XP Desktop (SP1). I've selected the Minimal Installation, and all goes on. When they reach the Configuration Tools Section of Setup...
It found the following fails:
- Net8 Configuration Assistant, fail:
Class not found: Files\Oracle\Ora81\network\jlib
- Oracle Database Configuration Assistant, fail:
There is no available output for this tool.
Apparently, it doesn't create the Starter Database (my main need). I'm newbie in Oracle Database world (I'm MS-SQL Server DBA), so, if anyone can help me, I'll be glad...
Thanks,
Rafael

Please turn on the debug trace in tip.properties
Since we want to see why B2B did not start, we want to have as much trace as possible. Please set the following (in tip.properties)
b2b.oracle.tip.DiagnosticLevel = DEBUG
oracle.tip.LogType = text
If there is an exception in also should be logged in /home/oracle/MTProd/opmn/logs/B2B~B2BServer~MTProd.helenab2b.helenachemical.com~1
Please gather as much trace information as possible when you start the B2B Server manually.
If opmn is not started, use the 'opmnctl start' command in $ORACLE_HOME/opmn/bin
Then use the following command to start B2B:
opmnctl startproc process-type=B2BServer
Thanks,
Eng

Dynamic Configuration Tool Issues

Hi,
Has anyone run into issues with the cisco dynamic configuration tool? I recently noticed I cannot customize the hardware I am trying to configure. This was not like this in the past.

Hi Laurence,
According to your description, you are creating a SQL Server Reporting Services report using SSAS cube as the data source, there are 40 parameters in the MDX query, so the performance is poor, right?
In your scenario, you said that 10 of the parameters using existing function, so you suspect that the issue can be caused by the existing function. Based on my research, it seems that the existing function is not a problem. Only issue is that use existing
function together with nonempty function, please refer to the link below to see the detail information about it.
http://cwebbbi.wordpress.com/2009/03/31/existing-and-nonempty/
In additional, I'd suggest you enable SQL profiler to monitor the queries fired by the query, once you find some queries took a very long time to run, consider creating the smaller cube partition or optimizing the query by adding index or partition
to improve the query performance. Here are some links about performance tuning.
http://www.bidn.com/blogs/DustinRyan/bidn-blog/2636/top-3-simplest-ways-to-improve-your-mdx-query
http://blogs.msdn.com/b/azazr/archive/2008/05/01/ways-of-improving-mdx-performance-and-improvements-with-mdx-in-katmai-sql-2008.aspx
http://www.packtpub.com/article/query-performance-tuning-microsoft-analysis-services-part1
Hope this helps.
Regards,
Charlie Liao
If you have any feedback on our support, please click
here.
Charlie Liao
TechNet Community Support

HT5487 So we just got a new Macbook and I also installed the apple configurator tool. I'm using it to prepare the iPads for deployment and it won't let me prepare them? It gets an error stating "retrieving iOS info from apple" then it stops and says "inte

So we just got a new Macbook and I also installed the apple configurator tool. I'm using it to prepare the iPads for deployment and it won't let me prepare them? It gets an error stating "retrieving iOS info from apple" then it stops and says "internet error". My Internet connection is fine with the Mac-book. It shows the iPad is listed under the Prepare logo up top as 1 but under supervise none are shown. Although it does show itself in iTunes. Also the profile I created is fresh and has no errors. We have tryed nearly everything I cna think of and online forums are not giving us to much info on this error.

A wag at this. A port issue?
"Apple Push Notification network setup
When MDM servers and iOS devices are behind a firewall, some network configuration may need to take place in order for the MDM service to function properly. To send notifications from an MDM server to Apple Push Notification service, TCP port 2195 needs to be open. To reach the feedback service, TCP port 2196 will need to be open as well. For devices connecting to the push service over Wi-Fi, TCP port 5223 should
be open."
http://www.google.com/url?sa=t&rct=j&q=ports%20ios%20configure%20ipad&source=web &cd=1&ved=0CC0QFjAA&url=http%3A%2F%2Fimages.apple.com%2Fipad%2Fbusiness%2Fdocs%2 FiOS_MDM.pdf&ei=5lXGUPCcJMXx0gH2wYG4BA&usg=AFQjCNFzINvs7ktT-6o6Q_l4Qk2HkpjtCA&ca d=rja
google: ports ios configure ipad
Try it on your home network where there isn't a lot of 'controls' -- network filtering , firewalls, etc.
Robert

OCS 2007 R2 Response Group Configuration Tool Failure

Hello there.
We are bringing back to life an old OCS installation. Customer performed a clean AD reinstall and we are in the process of re-installing OCS 2007 R2. All seems to work fine, except the RGS. When accessing the web tool we get this error:
Response Group Configuration Tool Failure
An unknown error occurred. The operation cannot complete successfully. Please contact the administrator if this problem persists.
Click here to return Home.
the Event viewer for application on the FE shows:
Event code: 3005
Event message: Excepción no controlada.
Event time: 13/05/2014 12:13:01 p.m.
Event time (UTC): 13/05/2014 06:13:01 p.m.
Event ID: a74ea242095f4e8099bca266a7a5cc83
Event sequence: 8
Event occurrence: 1
Event detail code: 0
Application information:
Application domain: /LM/W3SVC/1/ROOT/Rgs-1-130444779241580315
Trust level: Full
Application Virtual Path: /Rgs
Application Path: C:\Program Files\Microsoft Office Communications Server 2007 R2\Web Components\Acd Files\
Machine name: OCSR2-FE02
Process information:
Process ID: 6504
Process name: w3wp.exe
Account name: domain\RTCComponentService
Exception information:
Exception type: COMException
Exception message:
Request information:
Request URL: https://ocspool.domain.com:443/Rgs/Deploy/Default.aspx
Request path: /Rgs/Deploy/Default.aspx
User host address: 172.16.6.32
User: domain\user
Is authenticated: True
Authentication Type: Negotiate
Thread account name: domain\RTCComponentService
Thread information:
Thread ID: 9
Thread account name: domain\RTCComponentService
Is impersonating: False
Stack trace: en System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal(Int32 errorCode, IntPtr errorInfo)
en System.Management.ManagementObjectCollection.ManagementObjectEnumerator.MoveNext()
en System.Management.ManagementObjectCollection.get_Count()
en Microsoft.Rtc.Acd.Management.OcsApplicationContactSetting.Select(String condition)
en Microsoft.Rtc.Acd.Web.UI.WorkflowTemplate.GetContactObject()
en Microsoft.Rtc.Acd.Web.UI.WorkflowTemplate.AddedControl(Control control, Int32 index)
en ASP.deploy_default_aspx.__BuildControl__control15(Control __ctrl)
en Microsoft.Rtc.Acd.Web.UI.TemplateHelper.InstantiateWorkflowTemplate(AcdWorkflow workflow, ITemplate template, ControlCollection controlsToAddTo, String resourceClass, String templateResourcePrefix)
en Microsoft.Rtc.Acd.Web.UI.AcdWorkflowList.CreateChildControls()
en System.Web.UI.Control.EnsureChildControls()
en System.Web.UI.Control.PreRenderRecursiveInternal()
en System.Web.UI.Control.PreRenderRecursiveInternal()
en System.Web.UI.Control.PreRenderRecursiveInternal()
en System.Web.UI.Control.PreRenderRecursiveInternal()
en System.Web.UI.Control.PreRenderRecursiveInternal()
en System.Web.UI.Control.PreRenderRecursiveInternal()
en System.Web.UI.Control.PreRenderRecursiveInternal()
en System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
Custom event details:
on the OCS logs I have:
Unhandled exception occurred in the Response Group Service Configuration Tool. The operation could not complete successfully.
Requested URL: /Rgs/Deploy/Default.aspx
User / Host making the Request: domain\user/ 172.16.6.32
Unhandled exception: System.Web.HttpUnhandledException - Se produjo una excepción de tipo 'System.Web.HttpUnhandledException'.
Inner Exception: System.Runtime.InteropServices.COMException
Cause: An unhandled exception occurred.
Resolution:
Check the exception.
Windows server is installed in spanish, if you wonder why the mix in languages.
We have been battling with this error for the last 2 weeks. Any help is greatly appreciated!
FR

Hi,
Please check the configuration of the Response Group Service with the help of the link below:
http://technet.microsoft.com/en-us/library/dd441277(v=office.13).aspx
Please check the OCS components that are required to implement the Response Group Service below:
Application Server and Response Group Service
Language pack
Administrative tools
Web Components Server
Internet Information Services
Microsoft Office Communicator 2007 R2
You can try to use the workflows that you crated to validate the deployment.
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

Issue with client configuration for CuciLync 9.2.5

Hi,
we are currently preparing the client configuration for CuciLync 9.2.5.
When CuciLync starts we don't want to see the CuciLync window in the foreground.
Therefore we use the 'hubvisible' setting.
%APPDATA% \Cisco\Unified Communications\Jabber\CSF\Config\jabberLocalConfig.xml
<userConfig name="hubvisible" value="FALSE"/>
In addition we use this setting in the file
ProgramFiles%\Cisco Systems\CUCILync\jabber-config-defaults.xml
At first it looks like that the setting works fine.
But CuciLync always resets 'hubvisible' to 'true'.
Any idea what needs to be done to ensure that the setting is not overwritten ?
Thanks in advance for your feedback
Best Regards
Carsten Lucy

that might help
http://mysite.voicebootcamp.com/index.php/free-video-labs/video/uc-collaboration-ccie-collaboration-chapter-4-1-voice-gatew

SQL Server Configuration Tools Disappeared

I know I used to have Server Configuration Tools, but when I just looked for it, it seems like it has disappeared. I'm looking at this.
I'm getting this login error.
I used to be able to reset SQL Server using the Configuration Tools, but now I can't reset it, and I can't login.
Please help!!
Knowledge is the only thing that I can give you, and still retain, and we are both better off for it.

Hello,
When you connect using SSMS ( SQL server management studio) in server name give like
hostname\mssqlserver--if it is default instance
hostanme\instancename if it is named instance
hostname\SQLEXPRESS is it is express edition
now go to run tyoe services.msc look for SQL server services check if it starte dor not if not please start in try connection using above information
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers

MS SQL SERVER 2005 CLIENT ACCESS TOOLS

HELLO EXPERTS
I wanted to install sql 2005 client access tools, but I cannot seem to find it on my installation CD, any help please? Urgent and thank you

Its called Management Tools when you run it from installaton cd.
see
http://it-n-careerz.blogspot.in/2013/04/how-to-install-sql-server-management.html
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

Client Configuration Tool

Similar Messages

Maybe you are looking for