"Client not authorized" after start, OK after deploy

Whenever I try to create a session bean (stateful or stateless doesn't matter) right after app server startup, I get the exception "javax.ejb.AccessLocalException: Client not authorized for this invocation.". If I then redeploy the ear everything works fine. If I disable and then enable the application, the error comes back.
My role mappings are in the "sun-application.xml" file. The same EAR works fine in App Server 7 and 8 but not in 8.1.
Anyone else seen this?

Hi,
you are using Sun Java System App Server, right?
In my case it was a policy problem... I had some servlets fetching classes via Java Reflection.
I was lazy an set the <domain1>/config/server.policy file to AllPermission granted, not nice, but worked.
You may finetune your policies :-)
bye!

Similar Messages

AM is not retained after deployed the custom pages

Hi,
I have two custom pages, Create(page1) and Select Jobs(page2) pages.
In Create page I've a button called Populate Jobs, Once I click the populate jobs button it will navigate to another page. In page2 I'll select list of jobs using multiple selection.
Once multiple jobs selected I'm validating those jobs(lines) already added to the page1 when click submit button (available in page2).
Both pages have same AM and I'm retaining AM when I move from page1 to page2. In page 2 if click submit button I try to get all the existing lines which is arendered in page 1.
But i'm getting zero count but records are there. It is working very fine in my machine before deployment. But the AM is not retained after deployed to apps.
Details:
OA Extension
10.1.3 (Build OAEXT_MAIN_NT_100429.1954.1314)
My Jdev Version
10.1.3.3.0
EBS - OA Framework
12.1.3
EBS- Oracle OA Extension
10.1.3 - build 1313
please suggest me do I need to check any profile option to set AM State or any other solution for this.
Thanks in advance,
SAN

Hi.
Try adding some debugging statements using write diagnostics .
Check to see if VO is getting cleared on loading 2nd page.
Alternate solution would be to add these line id's of the selected lines before forwading.
On 2nd page, get these Id's and do whatever necessary.

Multiple DHCP servers Not authorized to start in domain.

Hello all,
Suddenly in our network, we started noticing that DHCP servers are getting unauthorized automatically and stop servicing to their clients.
it is happening randomly to all my locations and post restarting the service and authorize the service will solve the issue.
I dont know why this behavior and still some dhcp servers are prompting with this issue.
Upon checking the evenlog, i am able to find that the event id "1046" with the error message loggind in those machines stating that
The DHCP/BINL service on the local machine, belonging to the Windows Administrative domain CORP.DRREDDYS.COM, has determined that it is not authorized to start. It has stopped servicing clients. The following are some possible reasons for this:
This machine cannot reach its directory service enterprise and it has encountered another DHCP service on the network belonging to a directory service enterprise on which the local machine is not authorized.
Please provide your inputs on this behavior.
Regards,
Andrew

Could anybody update on this cause.

You are not authorized to start the administration workset - GP

I'm trying to launch the Administration Workset for GPs, to release objects from the "Life and Work Events" GPs from ESS, assigned GP Administrator to user and get the error:
"You are not authorized to start the administration workset"
Also tried adding virtually all GP and CAF roles to used with no luck, any ideas??
Max points to the correct answer =)

try to add a role called CAFUIADMIN and provide your user with this role. Otherwise all you need is the GP Adminstrator role.
hope that helps
Abdul

Google Devloper Console : Exception access_denied Requested client not authorized

Hi,
I am using Google API's to download the mails.
I have created a service account and set all required API's ON.Also added the project clientID to register api list.
I am able to download the mails of accounts present in this domain.
Is is possible to Add Member of another domain to this project and download the mails of that account using this project credentials.
I tried it but it gives me exception as
Error:"access_denied", Description:"Requested client not authorized.", Uri:""
Any idea?

Hi
shital diwate,
Since you are using Google API's. I am afraid that this is out of our support. This is third-party library. You can refer to
Google Developers Console Help page for the new help documentation. Thanks for your understanding.
Have a nice day!
Kristin
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

SAP* not authorized after Client copy

Dear All,
Here's the scenario:
1. Created a new logical system for a new Quality client 230.
2. Created the new client 220
3. scheduled a test remote client copy from the new client, source Production. (Successful)
4. Scheduled the actual client copy to run last night.
5. Today morning, I'm logging into the new client with SAP*, it prompted me to change password.
6. I want to look for the client copy logs (SCC3), but getting "not authorized"
7. Checked all other transactions, all giving "not authorized" error
Any help would be appreciated. Thanks in advance.

Dear Reza,
Better to go for Client Export Import process . This is what SAP reccomends for coping clients between
different systems ( Like from Production to Quality ) as the remote client copy has many
disadvantages..
For this 1 ) you should get the downtime of production system and do the client export process .
SCC8 . See the logs at scc3 .
2) Copy the datafile and cofile to the Source system
3) Import it usting stms_import .
Monitor the logs as the logs will be grown massive and make sure enough space is there.
4) After client copy , go for post processing ( scc7 ) .
Hope you are clear and feel free to get back if any doubts.
Regards,
Nibu

Images are not shown after deploying in apps

After deploying my application in apps i have put all my images in media folder even then the images are not displaying, can any tell me what is the reason for this, but when i have deployed before it was working fine...

when the page is displayed without the image, right click on the image place holder and click on properties. Under General tab,
address will show you the place/url page is looking for the image. Make sure you have put the image on that path and the name of image mathes the case as well.
--Tanveer

Adobe Javascript buttons does not work after deploying by ADS

Hi,
I have a dynamic PDF with adobe javascript " addInstance (1) ". In the preview of Adobe Lifecycle the PDF works like it should. However when I deploy the PDF in Developer studio the button is working anymore. It looks like the PDF isnt dynamic after deployment.
I have tried to add the following code , but it isnt working:
IWDInteractiveForm iForm1 = (IWDInteractiveForm)view.getElement("InteractiveForm1");
iForm1.setDynamicPDF(true);
Also, the properties of the PDF is set to Interactief Form, and XDP preview format is Dynamic PDF.
Does anyone know what the problem is?
Thank in advance.
Thaibinh
Application details:
Acrobat Reader 7.0.9 and higher
Adobe Live cycle 7.1
Developer studio S 7.0.13
AdobeControl version 6.3018.0.1
Type browser Internet Explorer 6.0
Operation system Linux
Type of interact form ACF
Netweaver 2004s

Hi Harman,
Am i inserting the code at the correct spot?
//@@begin javadoc:wdDoModifyView
Hook method called to modify a view just before rendering.
This method conceptually belongs to the view itself, not to the
controller (cf. MVC pattern).
It is made static to discourage a way of programming that
routinely stores references to UI elements in instance fields
for access by the view controller's event handlers, and so on.
The Web Dynpro programming model recommends that UI elements can
only be accessed by code executed within the call to this hook method.
@param wdThis Generated private interface of the view's controller, as
       provided by Web Dynpro. Provides access to the view controller's
       outgoing controller usages, etc.
@param wdContext Generated interface of the view's context, as provided
       by Web Dynpro. Provides access to the view's data.
@param view The view's generic API, as provided by Web Dynpro.
       Provides access to UI elements.
@param firstTime Indicates whether the hook is called for the first time
       during the lifetime of the view.
//@@end
public static void wdDoModifyView(IPrivateInfosessieenqueteView wdThis, IPrivateInfosessieenqueteView.IContextNode wdContext, com.sap.tc.webdynpro.progmodel.api.IWDView view, boolean firstTime)
    //@@begin wdDoModifyView
     if (firstTime) {
     IWDInteractiveForm iForm1 = (IWDInteractiveForm)view.getElement("InteractiveForm");
     iForm1.setDynamicPDF(true);
    //@@end

"not authorized" after editing and publishing

Hi,
I was reading a very usefull document - http://scn.sap.com/docs/DOC-36366, and I wanted to edit something (it mentioned tCode for product instead for order), so I clicked on "edit", edited, checked "minor change" and clicked on "publish".
Next thing - I recieved error message that I'm not authorized to view this content, the document disappeared from my bookmarks and if I go directly to its URL which I had by luck - I get "not authorized" message again.
HELP

Hello Yulia,
don't panic.
I guess, the document went into the moderator queue again, since you re-published it (correctly). So no need to worry, it will be available, when a moderator has looked at it and gave it a thumbs-up again.
When you look at the people-tab of the space, this document is in (I hope, you know where is was *g*), you can see the moderator-list. You can mention them here (by @ and their name or by just copying their profile-url and pasting it, if you want a feedback, if the document is in their queue.
Regards,
Steffi.

Purchased songs not authorized after 7.0.2 update

I'm sure I'm late to this problem, but perhaps someone can explain or link me to an explanation.
I just updated to 7.0.2, and now much of my previously purchased music is not authorized. What up?
Bill

Try a Restart.
Press and hold the Sleep/Wake button for a few seconds until the red "slide to power off" slider appears, and then slide the slider. Press and hold the Sleep/Wake button until the Apple logo appears.
Resetting your settings
You can also try resetting all settings. Settings>General>Reset>Reset All Settings. You will have to enter all of your device settings again.... All of the settings in the settings app will have to be re-entered. You won't lose any data, but it takes time to enter all of the settings again.
Resetting your device
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears. Apple recommends this only if you are unable to restart it.
Or if this doesn't work and nobody else on the blog doesn't have a better idea you can contact Apple.
Here is a link to their contacts with most of the information below.
http://www.apple.com/contact/

SCCM Client not installing after imaging the computer. Where to start?

Hi,
When I image or re-image a new machine, it will finish successfully but the client will be set to "NO" regardless of how many days I leave it there.
We delete the machine name both on SCCM and Active Directory prior to any image deployment. Therefore, the imaging process is treated as new. Autodiscovery is also enabled except for Network Discovery which we never enabled ever.
We are running SCCM 2012 SP1. Windows 7 both 32 and 64 bit.
If we install the client manually on the workstations, it is fine but it has to be automatic on the server side.
Pls. help. Thanks!

You are right on. Thank you thank you! The client is stuck in provisining mode. This helped me understand the cause of the problem.
However, the solution of setting the provision from true to false in the registry, didn't change the "client install" status from No to Yes. Also, the restart option is already set to the default operating system...
So what I did (and currently testing right now) is disabled the restart option to see if that's the reason it is getting messed up.
Will follow up shortly.

Client not working after 10.4.7 update

I am supporting friends and family overseas, all on PowerPC's (I am in Australia, clients are in UK).
I have 5 systems in my master list, each can connect successfully. One dropped out of list after Dynamic DNS lapsed. Have reset Dynamic DNS successfully, remoted into his router and reset Firewall rules configuration as well as confirming IP set-up via the router.
Cannot connect... When trying to add to Master List ARD is unable to verify the username and password. Have had user double check uname/pwd combo and started/restarted service but no fix.
Given that the only configuration change is his update to 10.4.7 and I have double checked all settings as well as confirming I can connect to all other clients does anyone have any suggestions?
Is there a way to uninstall his client completely then email him a .pkg to reinstall it? Any help is appreciated.
G4 Mac mini Mac OS X (10.4.7) ARD 2.2

to uninstall the client:
http://docs.info.apple.com/article.html?artnum=108021
you can create a client installer with the admin
under File, Create Client Installer...
Thanks for this. I will look into it further. The document you refer to states that 10.4 Clients should only be stopped rather than uninstalled, this concerns me a little. As I have tried simply stopping the service I will escalate to uninstalling the client and then see if reinstalling resolves the issue. Many thanks for your response.

Client not working after upgrade

Hi,
I am upgrading my SAP 8.8 SP:00 Pl 10 to PL 16. with the help of upgrade wizard all the SAP items are upgraded from PL 10 to Pl 16.
When i was login in through SAP client it asked for upgrade i clicked yes after some time the upgrade stop and the SAP client logo on the server disappear. Now i am not able to login since there is no client to login.
I tried to install client from set up file but it gives following error
Error Number: 0x80040702
Description: Failed to load Dll: creator Dll
I have refered SAP Note: 1408662 and also refered other thread but its not working
I tried to uninstall client from add/ remove program but i am not able to do so
Pls provide solution since i am not able to login.

Hi,
I have already installed the recommended c++ version as per SAP note, still it is not working. I tried to uninstall the client from
B1SHR folder but it gives me error.
The server is properly upgraded and problem exists on 3 of client machines.
I have to any how remove this client file or make it working to acces SAP else i wil have to format system which i dont want to do.

Web UI does not work after deployment of BBPCRM SP for CRM 7

Hello!
I just applied SP 2 for BBPCRM in our CRM 7 system and after that our web ui does not start correctly.
We can log in and choose a business role, but the we get the following error in the browser
Service cannot be reached
What has happened?
URL http://host.intranet.org:8061/sap_!DOCTYPE html PUBLIC"-//W3C//DTD HTML 4.01Transitional//EN"__html__head__title_Logon Error Message_/title__META http-equiv="Content-Type" content="text/html/css"_body { font-family:tahoma,helvetica,sans-serif call was terminated because the corresponding service is not available.
Note
The termination occurred in system CRD with error code 404 and for the reason Not found.
The selected virtual host was 0 .
What can I do?
Please select a valid URL.
If you do not yet have a user ID, contact your system administrator.
ErrorCode:ICF-NF-http-c:000-u:SAPSYS-l:K-i:host_CRD_61-v:0-s:404-r:Notfound
HTTP 404 - Not found
Your SAP Internet Communication Framework Team
It does not make any entries in the system log, but I found the following in the ICM log
Thu Mar 12 07:51:02 2009
*** ERROR => URLDecode recognised invalid sign in form field [ictxxfilt.c 248]
*** ERROR => illegal request {00030882} [http_auth.c 494]
Address Offset REQUEST:
Has anbody else encountered this error and how did you solve it?
I'm not really sure it is related to the BBPCRM package, it could be related to SAP WEBCUIF 700 package that had to be applied before BBPCRM SP 2.
Regards
rollo

Hello!
I just solved it!
I found that the SAP/webcuif services was disabled, if it was the SP that caused it or not, I don't know, but when I enabled it everything started to work!
Regards
rollo

Get "404 Not Found" after deployment. How to find out correct URL?

To the experienced:
In preparing to deploy my application, I am using JDeveloper 10.1.3.4 to deploy the application to the standalone oc4j server that is included in JDeveloper. After the deployment, I get the "404 Not Found" error when trying to invoke the application in a browser. The deployment looks OK, becasue the log window in JDeveloper showed no error when running deployment from inside JDeveloper. Therefore I guess the question is how to find out the correct URL to invoke the application. The steps I took in doing the deployment are as follows.
I first installed the standalone oc4j by running the <jdev_home>\jdev\bin\start_oc4j .bat file. The installation is OK because I deployed the SRTutorial applcation and invoked it in a browser successfully.
The WAR file was created by right-clicking the ViewController project and select to create a WAR file. To the application's Context Root its own name, I typed "ZB" in the box for the context root.
Then in ViewController -> Resources, right_click the deployment file (ZBOV.deploy) and chose "Deploy to" the local_standalone_oc4j. The messages in JDeveloper's log window for the deployment are all clean without errors.
I then used this url to invoke the deployed application in a browser:
http://localhost:8888/ZB/faces/staff/login.jspx
But I got an "404 Not Found" error. Right away I tried invoking the SRTutorial application, and it runs fine.
login.jspx is one of the pages for the appllication. In the application navigator, it is located with other files in the ViewController/Web Content/staff folder, therefore I used /staff/login.jspx after ZB/faces.
What could be wrong? If the deployment is actually successful, how to find out the correct url to invoke the application?
Many thanks for your help!
Newman

Hi, Arun,
Thank you for the suggestion. I tried it but got the same error.
I tried it by first undeploying the application using the enterprise manager page (which is also part of the oc4j included in JDeveloper). I select the application and clicked the undeploy link, confirmed that I wanted to remove it. And it was removed.
Then in JDeveloper, I right-clicked the ViewController, and in the properties of the probject selected "J2EE Application" and then selected "Use Custom Settings", then in the "J2EE Web Context Root" box I entered "ZB". Created the deployment profile again, overwriting the existing one, and then right-clicked the ZB.deploy node to deploy to the standalone oc4j on the localhost. And I used the url:
http://localhost:8888/ZB/faces/staff/login.jspx
And I got the same "404 Not Found" error.
There was no error at the time of deployment using the ZB.deploy profile. On the enterprise manager page, the path of the deployed application is given as /C:/jdev10134/j2ee/home/applications/ZB.ear, and the folder of the deployed application is there. Question is: if the deployment is actually OK, can the correct URL be found in some file somewhere in the folder?
All ideas and suggestions are very much appreciated!
Newman

"Client not authorized" after start, OK after deploy

Similar Messages

Maybe you are looking for