Client Specific TMS configuration

Hi,
How can configure client specific STMS
For eg;
Development Request from client 100 goes to Client 100 in quality, client 200 from Development200 goes to Qulaity Client 300.
Dev(100) --- Quality(100) -- Production
Dev(200) --- Quality(300) -- Production
Thanku

Hai,
You can use Extended Transport control to achieve this.
http://help.sap.com/saphelp_nw04/helpdata/en/1b/9dc2d6e59911d184810000e8a57770/content.htm
http://searchsap.techtarget.com/tip/1,289483,sid21_gci916309,00.html
Regards,
Yoganand.V

Similar Messages

Adding system and client specific TMS approval steps

Hello,
In defining QA approval steps, how to define a step which is not system and client wide?
When adding a new step, it is automaticaly defined with * in the client and system fields, and when changing the steps, these fields are not editable. However, there are several approval steps for which a specific system and client are entered, but this was done by a consultant, who was here some years ago.
Does anyone know how to do this?
Thanks in advance,
A

Hi Aleksandra,
Did you ever find a solution to this issue. I too have multiple QA systems in our landscape (4 system landscape), and yet I can not defined system/client specific approval procedures in STMS.
The system and client options don't even appear when I go into change mode, yet table TMSQASTEPS has the options available. Direct table update works fine, but it would be nice to know the "SAP standard" way of doing this.
Cheers
Shaun

TMS Client Specific Job

Dear Guru's
I have a three system landscape DEV,QAS, & PRD. I have configured a consildation route to a target transport group Which passes requests to unit testing client in DEV and the integration testing client in QAS. The delivery route moves requests to two other clients in QAS and the production client.
I want to automatically import requests to DEV Unit testing client and QAS integration client only. I managed to do the first one but if i scehdule a job for QAS it imports all requests into all clients in QAS even the one's on the delivery route??
Can i configure a client specific TMS job..
Thanks in advance

Hi Mohamed,
This is possible.
Do one thing. Stop the job that is importing transports to QAS system.
Now go to the STMS view for your QAS system. Click on column heading CLNT (Client) and use the filter option. You will get a pop up where you can give the client you want.
Now reschedule the import job using the import all option as you must have done earlier.
I hope this solves the issue. Please award points accordingly.
Regards.
>Ruchit.
Message was edited by: Ruchit Khushu
Message was edited by: Ruchit Khushu

TMS configuration - Transports between clients

Hi Experts,
I have an ECC system on which I would like to configure 3 clients. Client 400 for DEV, client 500 for QA, and client 600 for PRD.
I would like to configure TMS so that I will be able to transport directly from 400 to 500 and from 500 to 600.
Could anyone tell me if this is possible and (if so) how it should be done? Could you take me through the process?
Many thanks,
Aldo

Aldo
If you drill down further in the above link, you may find what you are looking for:
http://help.sap.com/erp2005_ehp_03/helpdata/EN/44/b4a09a7acc11d1899e0000e829fbbd/frameset.htm
title
u2022 Improved import controls
If you work with extended transport control, you can import requests into different clients in a system without using unconditional modes.
When you first import a request into a system, all the objects are imported completely. Any subsequent imports into other clients in the system only import client-specific components.
This makes it possible to set up consolidation routes and delivery routes between different clients in the same system.
Hope this helps!
PJ

Set Up CTS+: Webdynpro CTS_BROWSER - configure Organizer client in TMS

Hi all,
I'm trying to set up the CTS+ in a Portal Enviroment.
This is my landscape:
SID System Role
C1X ABAP + Java Stacks (CTS+ System and Trasport Domain Controller) with SPS15 (ABAP and JAVA)
JD1 Java Stack (EP Java Development System) Stack SPS14
JD2 Java Stack (EP Java Production System) Stack SPS14
I'm following step by step all points of Set Up and Use CTS+ in a Portal Enviroment Guide (May 2008).
In STMS (C1X) I add JD1 and JD2 System as Non-ABAP-System.
JD1 is the Java Source system and when I create it I set the flag "Activate Trasport Organizer" for C1X system
JD2 is the Java Target system and when I create it I set the flag "Activate Deployment Service" for method SDM
Then I create the new trasport layer ZJAD and the new trasport route from JD1 to JD2.
When I configure the trasport organizer Web UI and try to test the Web service CTS_BROWSER from SICF I received this message:
System C1X is not valid; configure Organizer client in TMS
Any IDEA??
Could you please help me?
Thanks
Moreno

Hi, I have the same issue here.
I think that is "normal" because SICF tries to run this in the name of you C1X system. This however must be running in e.g. the name of the development system.
e.g
http://hostname:8047/sap/bc/webdynpro/sap/cts_browser?SYSID=<PORTALDEVELPOMENT_SID>&PURPOSE=EP&sap-client=000&sap-language=EN
Thanks!
Edited by: BearCheese on Jul 9, 2008 10:05 AM

CHARM TMS configuration

Hello,
We are implementing CHARM in our project.. The landscape in our project is as below:
D-100 - Dev client
D-200 - Unit test client (Dev sys)
Q-100- Quality system (Integration Testing)
P-100- Production System
We have configured (client specific roots) TMS as D-100 --» Q-100 --» P-100. Is it possible to include D-200 as Unit test client in TMS?
As per SAP docs, once the Change Manager approves the reqeust, further tasks (creating transports and unit test...) will be handled by Developer. The developer will perform configuration in D-100 and accordingly create the transport request. Now IT operator will need to move the reqeust to testing client (D-200).
How the transport will be moved from D-100 to D-200 (Unit test client)??
Appreciate your reply.
Thanks,
SM

There are different ways to do this.
One option is:
1) Goto transaction STMS
2) Select 'Overview --> Imports'
3) Double click on the system you wish to schedule the job for
4) Click on the truck icon to schedule an import all job (only import
   all jobs may be scheduled as periodic)
5) Fill in target client, if necessary
6) Select 'At start time' and fill in the date and time
7) Next to 'Period' there is a box with a gray background. If you
   click in the box a drop-down arrow will appear. Click on this.
8) Select your period from the menu options and click on the green
   check.
9) Click on the green check again and your job will be scheduled.
or
Scheduling the Automatic Import of U_gent Corrections via /TMWFLOW/SCMA_BTCH_SYNC_UC
http://help.sap.com/saphelp_sm40/helpdata/en/96/0737423df2b26be10000000a155106/content.htm
or
give your IT Operator proper Roles to do the import manually
or
give your IT Developer proper Roles to do the import manually
Nesimi

Error in STMS - The TMS configuration is inconsistent

Hi gurus,
Yesterday I installed the SAP Solution Manager 7.0 SP14 with S.O. Win 2003 server and D.B. Oracle 10.2.0.4 version.
When I tried to configure the STMS I´m facing with a problem... the system send me a error "The TMS configuration is inconsistent" and when I open the error details it show me a information "tp configuration note completely distributed"... I search a lot to find a valid solution for this and I don´t have sucess, I don´t achieve a answer / suggest that solve this error...
Please give your suggestion to resolve this issue as snow as possible.
Thanks in advance
Best regards,
João Dimas - Portugal

Hi,
Please check the Note 1144208 - TMS Tendering: Inconsistent tendering template
Settings under the Transport Management System do follow the steps.
All the below settings has to be done in satellite system not solution manager
1.     Define Transport Routes for System Landscape
Go to Transaction STMS
Choose Overview -> Systems.
Double-click each system.
The Display TMS Configuration: System <system ID> screen appears.
Select the Transport Tool tab page.
If the entry CTC does not appear in the Parameters column, enter it there, and then in the Value column, enter 1.
Save your entries.
Configure Transport Strategy
Go to Stms Transaction
Go to Menu Overview  Transport Route
Doule click on Each System
In the Transport strategy group box, select Single transports
(since only Import Single and Import Project All are used).
In the Quality assurance group box, deselect Delivery after confirmation
1.     Choose Continue.
Activate TMS Trusted Services
Go to Stms Transaction
Choose Overview -> Systems.
Choose Goto -> Transport domain.
In Management Tab
In Security Options group box
Click on Trusted Services Active
Go to QA Approval Procedure
You should not assign any QA approval system there
Save your Entries
Call Transaction STMS.
Choose Overview  Systems. The system overview appears.
Choose SAP System  Create  Domain link.
The dialog box Request for Linking 2 Domains appears.
Enter the system name, host name and system number of the domain controller you want to link to, and then confirm your entries.
Your SAP System performs the following actions automatically:
o     Generates the required RFC destinations.
o     Sends the address data of the controller to the controller in the other domain.
You can now see that you have requested the domain link to the other domain in the system overview.
Click the Distribute and Activate TMS Configuration ICON on the Application Toolbar
After that Go to SAP System  Check  Connection Test, transport directory and transport tool
Check all once whether it is having inconsistency.
4.Check Configuration of Transport Domain
Log on to every domain controller that is connected to your transport landscape.
Call transaction STMS
Apart from the information "You are logged onto the domain controller", you should not be able to see other messages or warnings.
Generate RFC Destinations to Client 000
Call Transaction SMSY.
Go To Landscape Components
Go to your Satellite System
Click on the Domain Controller System
In the Right side Tab strip, Click on the Clients, Select 000 client Click on RFC generate Button
Give the User name for Read Access and Change Manager
Click the OK Button to Continue
Add Import Authorization to Operator/Administrator
Make sure that the operator and administrator users in client 000 of the target systems have the same name as their user in the Solution Manager   system.
Assign import authorization to the operator and administrator users in client 000 of the target systems (SAP_CHANGEMAN_OPERATOR and SAP_CHANGEMAN_ADMIN roles).
Regards
Sreedhar Reddy

TMS Configuration problem - SET_CODEPAGE_FAILED

I have just installed a new system "CRM 7.0/NW 7.01". The first thing I am doing is configuring TMS in client 000. When I try to distribute the configuration I get an error:    TMS Configuration could not start transport control program TP. SET_CODEPAGE_FAILED.
I looked at all the previous posts and have done all the prework: ENV variable dbms_type = ora and I upgraded the kernel to current.
In TMS I don't get an error when I check the connection or when I check the transport directory. It only happens when I check the transport tool. Here is the error message from the dev logs:
Trace file opened at 20110210 131154 Eastern Standard Time, SAP-REL 701,0,125 RFC-VER U 3 1215400 MT-SL
======> CPIC-CALL: 'ThSAPCMRCV' : cmRc=20 thRc=456
Timeout during connection setup (check that partner exists)
ABAP Programm: SAPLSTPA (Transaction: SPAM)
Called function module: RFC_TP_INTERFACE_VERSION
User: PREED (Client: 000)
Destination: CALLTP_WindowsNT (handle: 3, 64588453, {254135E0-9A35-F1B2-8C05-0013724E7C66})
Error RFCIO_ERROR_SYSERROR in abrfcpic.c : 3348
CPIC-CALL: 'ThSAPCMRCV' : cmRc=20 thRc=456
Timeout during connection setup (check that partner exists)
Error RFCIO_ERROR_MESSAGE in abrfcio.c : 1829
Thu Feb 10 13:11:14 2011
ERROR => GwISearchPartner: timeout, partner LU: >SITASERV44<, TP: >C:\usr\sap\CR3\DVEBMGS00\exe\tp.EXE< [gwr3cpic.c   6349]
ERROR => GwISearchPartner: HOST: SITASERV44, conv ID: 64555875 [gwr3cpic.c   6362]
Thank you for your assistance.
Peggy

I copied the wrong dev_rfc log:
Trace file opened at 20110210 130049 Eastern Standard Time, SAP-REL 701,0,125 RFC-VER U 3 1215400 MT-SL
======> CPIC-CALL: 'ThSAPCMRCV' : cmRc=20 thRc=456
Timeout during connection setup (check that partner exists)
ABAP Programm: SAPLSTPA (Transaction: )
Called function module: RFC_TP_INTERFACE_VERSION
User: TMSADM (Client: 000)
Destination: CALLTP_WindowsNT (handle: 3, 63913828, {953F35E0-66FD-F1C8-8C05-0013724E7C66})
SERVER> RFC Server Session (handle: 1, 63911750, {983F35E0-5E6B-F160-8C05-0013724E7C66})
SERVER> Caller host:
SERVER> Caller transaction code: STMS (Caller Program: SAPLTMSC)
SERVER> Called function module: TMS_CI_START_SERVICE
Error RFCIO_ERROR_SYSERROR in abrfcpic.c : 3348
CPIC-CALL: 'ThSAPCMRCV' : cmRc=20 thRc=456
Timeout during connection setup (check that partner exists)
Error RFCIO_ERROR_MESSAGE in abrfcio.c : 1829

TMS configuration problem

Hello everybody,
I had install the IDES ECC 6.0, Now i want to configure the TMS then I have planned the client like
800->customizing
500->backup (means only copy the change request)
550-->Quality (Same as backup but here i will test all the configuration)
600-->PRD( like final producion)
Then, How to configure TMS?
which transport route is set and hows?
when i am trying to configure then i get message like
Delivery with source system IDS & source client 800 not allowed
Will anybody please send the step by step proceudure to configure the right TMS configuration
Thanks
Ganesh

Hi,
I am bit cofused about the client, are these clients in same system or different systems, if the clients are in same system, then
Any way you will save the customizing changes you have done under a change request number, then login into the client which was present in same system and execute the t-code SCC1, here you have to select the change request number that you wanted to import from other cleint and the source client number and execute, the changes will be transferred into this cleint(note: this was case when both clients in same system).
If you wanted the change request to be transported into client which was in other system(you need TMS configured by now), the you have to release the change request in the source system client and using STMS you can trasnsport the change requests to the target system into tghose clients, you need to trasnport this way to all cleints in target system.(Note: once change request is released you cannot add any modification in that Change request, need to create new request again)
for backup of your customizing cleint, make a new client in source system and using local client copy process you can have backup of your customizing client(decide local cleint copy frequency yourself for this), if you wanted to take backup into some other system you can do it by remote client copy.
apart form your SAP level backup, you should always backup your entire system onto tape or some other system ikn co-ordination with your IT team.
Regards.....

TMS Configuration Database installation

Dear Gurus,
I have few requirements from client which is
(1). TMS configuration between two systems which are DEV(Bangalore) PRD(Hyderbad) is it possible or not if is possible howit is?
(2). is it possible to install database is in one server and SAP application(CI) is in one server if it is possible how it is?
Please give me the some sugestion.
with Regards,
kk

Hi,
> (1). TMS configuration between two systems which are DEV(Bangalore) PRD(Hyderbad) is it possible or not if is possible >howit is?
Yes this is possible.
Check below links to configure TMS:
[link1|http://bbs.cenet.org.cn/UploadImages/200581112435749207.pdf]
[link2|http://www.academictutorials.com/sap-basis/sap-basis-tms-configuration.asp]
[link3|http://help.sap.com/saphelp_nw04/helpdata/en/44/b4a15d7acc11d1899e0000e829fbbd/content.htm]
> (2). is it possible to install database is in one server and SAP application(CI) is in one server if it is possible how it is?
>
Yes, this is also possible.
[link1|http://help.sap.com/saphelp_40b/helpdata/pt/e5/06a411802111d1889a0000e83539c3/content.htm]
[link2|Re: Advantages of Distributed Installation;
Thanks
Sunny

How to set up the client-specific consolidation routes

Hi!
I am setting up TMS-functionality in my 2-system landscape (DEV, PRD) and would like to use 2 Clients in the DEV-system (100> Cust and 200> Test).
<b>How can I set up the tranport routes between the Clients 100 and 200 in the same system DEV?</b>
I read, the client-specific consolidation route should be applied in this case?!
(also some parameter settings should be edited, e.g. CTC)
<b>Can some one give me a detail technical description how to set up the client-specific consolidation routes between Client 100 and 200 in DEV-system?</b>
Thank you!
regards

Hi Axel,
You have activate Extended transport route.
refer this link to helpout for the same
http://help.sap.com/saphelp_47x200/helpdata/en/2e/709533ef9b11d184850000e8a57770/frameset.htm
Reward points if helpful.
Regards
Ganesh

Local TMS configuration inconsistent in sid

hi,
i am facing this problem while using tms
"Local TMS configuration inconsistent in sid"
can u pls help me

at first, the TMS domain is running good.
I delete the TMS configuation in DEV client 000 before delete QAS system in this domain, and then i try to reconfig TMS domain in DEV, when i try to join QAS to the domain, I got the error message "Local TMS configuration inconsistent in QAS", details information:
=============================================================
System   QAS              Command TMS_MGR_CONFIGURE_CLIENT
Client   000              Service Communication Interface
User     TMSADM           Start    Online
Date     2011-05-23       Function TMS_CI_START_SERVICE
Time     11:12:40         Message INVALID_LOCAL_CONF
    Local TMS configuration inconsistent in QAS
    tms_not configured
=============================================================
and i try to update and distrubut the domain configuation in Domain controller(DEV) according the online help, and I try to post installation both in DEV and QAS, but still no effected of all.

Are One-Off patches client specific?

Hi
Are One-Off patches client specific? I have a document which lists the patches applied to Oracle Home on existing server and I have to apply the same patches to a new server that I am building. I searched for all the patches listed but the "one-Off" patch listed cannot be found by the search.
Please let me know.
Best regadds

user130038 wrote:
Hmm... maybe I should have provided a bit more info.
The server i am configuring is 10gR2 (client is still using this release and have extended support - so downloading patches should not be a problem). I have to move DBs from existing server to a new one. Before i do that, I have to install exact same binaries (rel and patches) that have been applied to existing server. The document I have been provided contains list of patches applied to oracle home (10.2.0.5). Among the list of patch numbers, this is the only one I could not find.
The do you have referred to is for 11g not 10g.
Regards
then you need to follow Srini's suggestion regarding cloning the oracle home.

What is client specific,client dependent,client in-dependent please explain

Hi,
Could anyone explain below terminologies
client specific,
client dependent,
client in-dependent
Delta -
Thanks.
RAAM

Hi,
when you log on to SAP you log on to a client.
That client may be sitting on server with other client.
Typically in a development system you will have several clients.
- One for you configuration
- one for your unit testing
- one for your playpen testing
- some even have one just for ABAP developments
There are some configuration setting you do that are client specific (client dependent). I.e it means that your configuration will only be seen in client.
There are some configuration settings and all ABAP developments that are client independent. I.e do the change in one client and that change is automatically, immediatly visible in all other clients.
Hope it clears things up.

Problem in transporting Variants - "You cant transport client-specific obj"

Hi,
I am facing a problem while trying to transport variant from DEV to QAS.
When I tried to transport one of the variants (of a program) from DEV to QAS (quality system), it gave me an error that: "You cannot transport client-specific objects".
Pleasehelp.
Thanks,
Vishal.

Hi,
The program is Not a local object. I am trying to assign the variant to a transport via. SE38->variant->display->utilities->transport request-> request number.
Is there a way to modify this variant from client specific to "non-client-specific".
Also, please let me know hoe do we copy this variant into a new variant which is not client specific (i.e. a global variant).
Thanks,
Vishal.

Client Specific TMS configuration

Similar Messages

Maybe you are looking for