What is client specific,client dependent,client in-dependent please explain

Hi,
Could anyone explain below terminologies
client specific,
client dependent,
client in-dependent
Delta -
Thanks.
RAAM

Hi,
when you log on to SAP you log on to a client.
That client may be sitting on server with other client.
Typically in a development system you will have several clients.
- One for you configuration
- one for your unit testing
- one for your playpen testing
- some even have one just for ABAP developments
There are some configuration setting you do that are client specific (client dependent). I.e it means that your configuration will only be seen in client.
There are some configuration settings and all ABAP developments that are client independent. I.e do the change in one client and that change is automatically, immediatly visible in all other clients.
Hope it clears things up.

Similar Messages

Product type 56A - what do clients use as the underlying

Hi All
I now understand that you associate some borrowing transaction type/product type combination to product type 56A as a facility in the 'Admin' tab.
The question I have is what do clients normally use as the product type/transaction type combination for these facilties? Do they do like a 0% interest 55A/200 or do they set up a fixed interest 55A/200. I mean I am not sure what to advise the client of mine to use. What product type to use, where to give the injterest (in the 56A or the underlying product type)
Your thoughts & inputs are appreciated.
Thanks
Regards
Morgan

Hi Morgan,
just to add a few words to what mentioned by Ravi.
Facility or credit line is a kind of guarantee, that you as a borrower will be able to borrow some maximum agreed amount of funds during certain period of time. And, of course, usually you need to pay certain price for that. Pricing itself really depends on competitive environment.
So, overall you have 2 type of expenses:
--- interest expenses on facility/ credit line (Product category 560);
--- interest expenses on real borrowing/ drawing (earlier mentioned instruments fixed-term deposits, interest rate instruments, etc.). Usually, interest rate here depends on number of factors, like credit quality of borrower, benchmark yield curve for specific currency, etc., and is almost >0, cause money has certain price.
hope this will help you.
Rgds,
Renatas

What is client independent customizing....Newbie

Gurus
Client has Application data(master + transactional data)
Customizing data pertaining to the client
Then what is client independent customizing...I read on SAP...but I do not understand its weird definition...please explain me in simple English
During client copy when should i choose client independent data to be copied? if my target client already exists.

Hi
A client is an independent business unit within an R/3 System, Data in the R/3 are classified as cleint-Dependent and client-independent.
Client-independent data such as ABAP Programs, R/3 repository objects throught the entire system.
Other data is client-dependent. meaning, it can be viewed from one client.Cleint-dependent data includes customizing application and user data.
enterprise IMG is cleint independent.
REgards
Anwer Waseem
SAP BASIS

BR*Tools 7.0 and 7.1 what Instance Client version 10202 or 10204

I'm not sure if this is the wright form, but here goes. I have a question. What Instance Client verion (10.2.0.2 or 10.2.0.4) do you install with BRTools 7.0 and BRTools 7.1. Can you use either Instance Client version with either versions of BR*Tools?

I'm not sure if this is the wright form, but here goes. I have a question. What Instance Client verion (10.2.0.2 or 10.2.0.4) do you install with BRTools 7.0 and BRTools 7.1. Can you use either Instance Client version with either versions of BR*Tools?

What is Client in SAP?

Dear
What is Client in SAP?

Client is the instance in SAP.
For eg:
Client 200 - Development client, where Abappers would do coding / like a sandbox
Client 300 - Customization Client, where do you customization pertaining to client business.
Client 500 - Quality Client - Where you do your testing before Go-live
Client 700 - Production - Where the end users use the SAP system as per real time scenario.
Hope this is clear.
Reward points if helpful.
Regards
Ravi

What is client in SAP???how to explain as a technical Consultant??

What is client in SAP???how to explain as a technical Consultant??
this is the question asked by SAP labs,India.
Can anyone giv me a proper Answer
Thanks in Advance.

Hi,
Normally we have 3 clients in our real time scenario.Development,Quality and production client.Each client has different client numbers like 100 ,200, 300. First we develop our applications in development client.We will assign this to a package like ZDE. at this time a request will be assigned .then we will release this from se01 or se10. then we need to import themin quality client. In quality client we have the data which is closed to Production system.Here we will perform all the testing .If any changes we want to do then once again we will do in dev client and transport it to quality.If everything is ok.Then we will transport this to Production client where key users will use our applications.
Hope u understand.
Regds,
Vinsa.R

Is there an online version of ichat, like what google clients have ie the google chat

is there an online version of ichat, like what google clients have ie the google chat

Not tried it yet
http://www.aol.com/av/
10:29 PM Friday; October 14, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb( 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

5800xm .. What is Client Platform

I guess the title says it all.
Had my phone replaced yesterday for the 3rd time.. and had my first re-ocurring fault today..
No message alert for incoming text messages.
I said that I wasn't going to install any apps on this one, until I was satisfied, that it was going to be OK, but upon configuring my email yesterday, the phone downloaded and installed Nokia Email..
I know it's not required, as I've just removed it along with client platform, and my emails still work..
So my question at the top, what is client platform ?

I think its one of the setup files for the connection to your Ovi Account through PC or Ovi Suite.
If you find my post helpful please click the green star on the left under the avatar. Thanks.

Hi,can anyone guide me on what is client side database & grid database.....

what is client side database & grid database..........and what is the difference between Dataguard and stand by database() these are interview questions.........i am dba learner pls explanin me.......
thanks u all...

I'm not trying to be funny or mean, but, in my experience, if you don't know what a product/tool/component is, then you should say so. If you give the impression that you do know about a technology in your interview and you are hired based upon that premise, you might find yourself struggling mightily when your employer asks you to 'implement DataGuard by the end of the week'...
Just some advice. Good luck in your interview!

What is Client-Side API for RMI on the Java Card Platform

What is Client-Side API for RMI on the Java Card Platform ?
And what is host software ?

Your post is weird: you seem not to agree with yourself O_o
OF COURSE sim cards have CPUs, otherwise how would you run an OS or a java vm on them?
to drive the wifi there will be a proprietary api, just like mifare access on normal cards.
the OS should manage the wiki stack in C/asm and expose javacard entry points. only "should" because this is only a press release.

Public folder migration difference what Outlook client see

I have successfully migrated public fodders from Exchange 2007 to Exchange 2013. Problem that I`m seeing is what Outlook client see.
I have two types of clients :
Windows XP + Outlook 2007
Windows 7 + Outlook 2013
Outlook 2013 client see Public fodders as expected.
Outlook 2007 client, sees one level lower including ipm_subtree.
Is these normal ?

Hi,
Please try to use OWA to check whether you can expand the subtree of Public Folder.
If OWA works, how about using Outlook 2007 with Online Mode?
Thanks
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Mavis Huang
TechNet Community Support

(Cisco Historical Reporting / HRC ) All available connections to database server are in use by other client machines. Please try again later and check the log file for error 5054

Hi All,
I am getting an error message "All available connections to database server are in use by other client machines. Please try again later and check the log file for error 5054" when trying to log into HRC (This user has the reporting capabilities) . I checked the log files this is what i found out
The log file stated that there were ongoing connections of HRC with the CCX (I am sure there isn't any active login to HRC)
|| When you tried to login the following error was being displayed because the maximum number of connections were reached for the server . We can see that a total number of 5 connections have been configured . ||
1: 6/20/2014 9:13:49 AM %CHC-LOG_SUBFAC-3-UNK:Current number of connections (5) from historical Clients/Scheduler to 'CRA_DATABASE' database exceeded the maximum number of possible connections (5).Check with your administrator about changing this limit on server (wfengine.properties), however this might impact server performance.
|| Below we can see all 5 connections being used up . ||
2: 6/20/2014 9:13:49 AM %CHC-LOG_SUBFAC-3-UNK:[DB Connections From Clients (count=5)]|[(#1) 'username'='uccxhrc','hostname'='3SK5FS1.ucsfmedicalcenter.org']|[(#2) 'username'='uccxhrc','hostname'='PFS-HHXDGX1.ucsfmedicalcenter.org']|[(#3) 'username'='uccxhrc','hostname'='PFS-HHXDGX1.ucsfmedicalcenter.org']|[(#4) 'username'='uccxhrc','hostname'='PFS-HHXDGX1.ucsfmedicalcenter.org']|[(#5) 'username'='uccxhrc','hostname'='47BMMM1.ucsfmedicalcenter.org']
|| Once the maximum number of connection was reached it threw an error . ||
3: 6/20/2014 9:13:49 AM %CHC-LOG_SUBFAC-3-UNK:Number of max connection to 'CRA_DATABASE' database was reached! Connection could not be established.
4: 6/20/2014 9:13:49 AM %CHC-LOG_SUBFAC-3-UNK:Database connection to 'CRA_DATABASE' failed due to (All available connections to database server are in use by other client machines. Please try again later and check the log file for error 5054.)
Current exact UCCX Version 9.0.2.11001-24
Current CUCM Version 8.6.2.23900-10
Business impact Not Critical
Exact error message All available connections to database server are in use by other client machines. Please try again later and check the log file for error 5054
What is the OS version of the PC you are running and is it physical machine or virtual machine that is running the HRC client ..
OS Version Windows 7 Home Premium 64 bit and it’s a physical machine.
. The Max DB Connections for Report Client Sessions is set to 5 for each servers (There are two servers). The no of HR Sessions is set to 10.
I wanted to know if there is a way to find the HRC sessions active now and terminate the one or more or all of that sessions from the server end ?

We have had this "PRX5" problem with Exchange 2013 since the RTM version. We recently applied CU3, and it did not correct the problem. We have seen this problem on every Exchange 2013 we manage. They are all installations where all roles
are installed on the same Windows server, and in our case, they are all Windows virtual machines using Windows 2012 Hyper-V.
We have tried all the "this fixed it for me" solutions regarding DNS, network cards, host file entries and so forth. None of those "solutions" made any difference whatsoever. The occurrence of the temporary error PRX5 seems totally random.
About 2 out of 20 incoming mail test by Microsoft Connectivity Analyzer fail with this PRX5 error.
Most people don't ever notice the issue because remote mail servers retry the connection later. However, telephone voice mail systems that forward voice message files to email, or other such applications such as your scanner, often don't retry and
simply fail. Our phone system actually disables all further attempts to send voice mail to a particular user if the PRX5 error is returned when the email is sent by the phone system.
Is Microsoft totally oblivious to this problem?
PRX5 is a serious issue that needs an Exchange team resolution, or at least an acknowledgement that the problem actually does exist and has negative consequences for proper mail flow.
JSB

HI experts please explain abap client proxy

1) please explain abap client proxy step by step.how it is working

Hi
-->ABAP proxy are the proxy which we create in R/3 system
-->If we create the proxy on Outbound Message interface in R/3 system then it is ABAP Client proxy.
-->If we create the proxy on Inbound Message interface in R/3 system then it is ABAP Server proxy.
Thanks

SCREEN LOCKED error "Searching for your client device. Please wait..."

This error is locking my routers configuration screen. "Searching for your client device. Please wait... If you haven't clicked on the Wi-Fi Protected Setup button on your client device, please do so now."
Is there a fix for this issue without restoring to the factory defaults?.
Your work around is not an option because restoring the factory defaults and reconfiguring the router manually is would be too time consuming in our small office and can afford the downtime. Is there a fix for this issue without restoring to the factory defaults? This problem has been crippling many of the Linksys routers for some time now; just search the error on goggle.
Solved!
Go to Solution.

Power cycle the router. Unplug the power cord for 30 seconds and power it back on. If it still won't work, then you will have to reset and reconfigure the router. Please check the links below on how to reset the router and set it up for either cable or DSL:
Title: Resetting the router to factory defaults and changing the router’s password
Article ID: 19584
http://kb.linksys.com/Linksys/GetArticle.aspx?docid=1e97db4854604b0fb5cc8c0d74491e35_19584.xml&pid=8...
Title: Setting up a Linksys router for DSL Internet connection
Article ID: 3687
http://kb.linksys.com/Linksys/ukp.aspx?vw=1&docid=20ee1457387f40178cd5f41d4b585db4_3687.xml&pid=80&r...
Title: Setting up a Linksys router with Cable Internet service
Article ID: 3686
http://kb.linksys.com/Linksys/ukp.aspx?pid=80&vw=1&articleid=3686

What are the Specifications of Extreme Model A1354

What are the Specifications of Extreme Model A1354

If you might be thinking about purchasing a used device, you should be aware that the A1354 is going to be anywhere from 4 years to 5+ depending on when it was originally sold.
The useful life of an AirPort router is, on average, about 5 years....so you might want to give that some thought, if you are considering a purchase.

What is client specific,client dependent,client in-dependent please explain

Similar Messages

Maybe you are looking for