Clientdeploy fails whilst validating user
I cannot join client computers to the domain on the Server Essentials 2012 system. When ever I try, the clientdeploy wizard fails with a message that it can't find the server, just after it has collected the domain account name and password. I'm assuming
this is some configuration issue with IIS on the server, but I haven't got any handle on what it might be.
In the ClientDeploy Log, this is what I see:
[2064] 131227.171658.4208: ClientSetup: Validating User
[2064] 131227.171658.4208: ClientSetup: Call MachineIdentityManager.GetMachineStatus
[2064] 131227.171658.6611: ClientSetup: MachineIdentityManager.GetMachineStatus had errors: ErrorCatalog:NetworkError ErrorCode:-1
BaseException: Microsoft.WindowsServerSolutions.Devices.Identity.MachineIdentityException: MachineIdentityManager.GetMachineStatus ---> System.ServiceModel.ProtocolException: The remote server returned an unexpected response: (405) Method Not Allowed. ---> System.Net.WebException: The remote server returned an error: (405) Method Not Allowed.
at System.Net.HttpWebRequest.GetResponse()
at System.ServiceModel.Channels.HttpChannelFactory`1.HttpRequestChannel.HttpChannelRequest.WaitForReply(TimeSpan timeout)
--- End of inner exception stack trace ---
Server stack trace:
at System.ServiceModel.Channels.HttpChannelUtilities.ValidateRequestReplyResponse(HttpWebRequest request, HttpWebResponse response, HttpChannelFactory`1 factory, WebException responseException, ChannelBinding channelBinding)
at System.ServiceModel.Channels.HttpChannelFactory`1.HttpRequestChannel.HttpChannelRequest.WaitForReply(TimeSpan timeout)
at System.ServiceModel.Channels.RequestChannel.Request(Message message, TimeSpan timeout)
at System.ServiceModel.Dispatcher.RequestChannelBinder.Request(Message message, TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation)
at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message)
Exception rethrown at [0]:
at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
at Microsoft.WindowsServerSolutions.Devices.Identity.ICertService.GetMachineStatus(MachineStatus& status, Boolean& isAdmin, Int32& maxClientNum, Int32& currentClientNum, String userName, String password, String machineName)
at Microsoft.WindowsServerSolutions.Devices.Identity.MachineIdentityManager.GetMachineStatus(String serverName, String userName, String password, String machineName, Boolean& isAdmin)
--- End of inner exception stack trace ---
at Microsoft.WindowsServerSolutions.Devices.Identity.MachineIdentityManager.GetMachineStatus(String serverName, String userName, String password, String machineName, Boolean& isAdmin)
at Microsoft.WindowsServerSolutions.ClientSetup.ClientDeploy.ValidateUserTask.Run(WizData data)
[2064] 131227.171658.6611: ClientSetup: Exiting ValidateUserTask.Run
[2064] 131227.171658.6611: ClientSetup: Task with Id=ClientDeploy.ValidateUser has TaskStatus=Failed
[2064] 131227.171658.6611: ClientSetup: Task with Id=ClientDeploy.ValidateUser has RebootStatus=NoReboot
[2064] 131227.171658.6611: ClientSetup: Exting ConnectorWizardForm.RunTasks
[164] 131227.171658.6711: ClientSetup: JoinNetwork Tasks returned TaskStatus=Failed
[164] 131228.000408.7404: ClientSetup: Back from the Client Deployment Wizard
[164] 131228.000408.7805: ClientSetup: Saving Wizard Data
[164] 131228.000408.7805: ClientSetup: End of ClientDeploy: ErrorCode=1603
Searching the web, I can only find this error in items about people programming web services in ASP.
Can anyone help to figure out what's wrong?
Can you check the IIS log file for "WSS Certificate Web Service"
Web Application. Log files should ben the folder C:\Inetpub\Logs\LogFiles\W3SVC2.
Check for error 405.
If you are getting error 405 check for Web Handler for *.svc
You can do this by running the PowerShell command Get-WebHandler | Where-Object {$_.Path -like "*.svc"}
This should result in the following Web Handlers
Name Path
Verb Modules
svc-Integrated-4.0 *.svc *
ManagedPipelineHandler
svc-ISAPI-4.0_32bit *.svc *
ManagedPipelineHandler
svc-ISAPI-4.0_64bit *.svc *
ManagedPipelineHandler
If the command does not return any result, you need to add the Web Handler for *.svc
This post is "AS IS" and confers no rights. Mohammed Sabir [MSFT]
Similar Messages
-
Hello,
I've got a SOA Suite development environment set up and whilst trying to change the weblogic password using this tutorial a problem arose with my soa managed server.
Firstly I was unable to start the Managed SOA server due to mismatching passwords, and after I modified the boot.properties file, now I cant start the usermessagingserver and soa_infra applications due to the following error:
Error 1
Getting weblogic deployment manager.
Got weblogic deployment manager.
Invoking Start Up operation.
Start Up operation for application usermessagingserver on target soa_server1 RUNNING.
Start Up operation for application usermessagingserver on target soa_server1 FAILED.
weblogic.application.ModuleException: Exception preparing module: EJBModule(sdpmessagingclient-ejb-parlayx.jar)
Unable to deploy EJB: MessagingClientParlayX from sdpmessagingclient-ejb-parlayx.jar:
The run-as security principal, 'OracleSystemUser', chosen for the EJB 'MessagingClientParlayX(Application: usermessagingserver, EJBComponent: sdpmessagingclient-ejb-parlayx.jar)' is not a valid user principal in the current security realm. Please specify a valid user principal for the EJB to use.
Getting weblogic deployment manager.
Got weblogic deployment manager.
Invoking Start Up operation.
Start Up operation for application soa-infra on target soa_server1 RUNNING.
Start Up operation for application soa-infra on target soa_server1 FAILED.
weblogic.application.ModuleException: Exception preparing module: EJBModule(hw_services_wls_ejb.jar)
Unable to deploy EJB: ASNSInteraction from hw_services_wls_ejb.jar:
The run-as security principal, 'OracleSystemUser', chosen for the EJB 'ASNSInteraction(Application: soa-infra, EJBComponent: hw_services_wls_ejb.jar)' is not a valid user principal in the current security realm. Please specify a valid user principal for the EJB to use.
I've checked both weblogic and OracleSystemUser users and their groups are (respectfully) Administrators and OracleSystemGroup.
I've searched for an answer to this problem and found this other support article but couldn't resolve the issue.
The weblogic server version is 10.3.2.0 and it's running on RedHat Linux.@Sri_Sonti
In the Admin Console, I can see both users in the security realm with the following configs:
weblogic:
all atributes with the "value" column blank
groups: Administrators
OracleSystemUser
all atributes with the "value" column blank
groups: OracleSystemGroup
Also I have not found the system-jazn-data.xml file you mentioned. In that folder there's only a readme.txt file.
Best Regards,
luismcs
Enter Cookie as format:
(ex: name=val;) separate with ';'
OKCancel -
Inconsistent Form Behavior on Failed Struts Validation
So I'm working on a strange bug regarding an Edit User form for an application, where some fields revert to their default and some fields do not.
We have a form for editing users in our system, with most of the usual information inputted in text boxes (login, first name, last name, password, password confirmation). We also have three possible levels of 'admin' - none, admin, and superadmin. These are chosen via radio buttons. There are also a couple of checkboxes (like 'user is active'). Overall, it's a fairly simple form.
When the form is submitted, we do struts validation. We've set up the validation via comment annotation in our Java code, like so:
* @struts.validator type="minlength"
* arg1value="${var:minlength}"
* @struts.validator-var name="minlength" value="8"
* @struts.validator type="maxlength"
* arg2value="${var:maxlength}"
* @struts.validator-var name="maxlength" value="50"
public void setPassword1(String string) {
password1 = string;
}All of the fields in our form are set from user properties, so they're initialized by the values in the user object. For example, if we had user John Smith, an admin, with login 'jsmith,' we'd have the first name and last name fields initialized to John and Smith, and the radio buttons for Admin set to 'admin.' For reference, here's the EditUser.jsp code for the radio buttons, based off of the selectedAdminRole property:
<div class="InputElement">
<label for="selectedAdminRole"><bean:message key="userForm.adminType"/></label>
<html:radio styleId="selectedAdminRole" property="selectedAdminRole" value="None"
disabled="${userForm.loggedInUser.admin and userForm.userId == userForm.loggedInUser.id}">None</html:radio>
<html:radio property="selectedAdminRole" value="Admin"
disabled="${userForm.loggedInUser.admin and userForm.userId == userForm.loggedInUser.id}">Admin</html:radio>
<c:if test="${userForm.loggedInUser.superAdmin}">
<html:radio property="selectedAdminRole" value="SuperAdmin">Super</html:radio>
</c:if>
</div>As you can see above, the struts validator requires passwords to be at least 8 characters long. So if the user tries to change their password to something with less than that, they'll fail validation and they'll end up back on the form with the validation errors in red at the top of the page. However, the form data that they've edited will be preserved. So if John had tried to change his first name to 'Fred,' he'd still see 'Fred' in the First Name text field, even though it wouldn't actually get saved to the user object until he submitted the form with no errors. This works with radio buttons too - if John had tried to set his admin status down to 'none' from 'admin,' the radio button 'none' would still be checked. Basically, it preserves all your progress on the form until you navigate away.
Unfortunately, it does NOT do this when you create a new user. Creating a new user uses the same form, and since there's no user object to get the fields from, they all get initialized to blank - except for one of the checkboxes ('user is active') and the radio buttons for admin (starts with 'none' checked). Now, if the user fills out the form and hits submit, but fails the struts validation, it preserves all the form data in the text fields, but reverts the checkboxes and the radio buttons to their default state.
This leads to the following problem: say I'm trying to create a new admin, Jane Smith. I fill out the whole form, check the 'admin' button, and then enter a four-letter password. I submit, and the form fails struts validation and throws me back to the page with an error message informing me that passwords need to be at least 8 characters. I look over the form again - the login field is still 'janesmith,' the first name field is still 'Jane,' the last name field is still 'Smith,' everything looks fine except I screwed up the password. I enter an 8 letter password and resubmit. Jane then logs in and complains that she's not an admin, because I didn't notice that the 'admin' button had reset itself to the default of 'none' when I failed validation.
My question is, why does it reset the radio buttons and checkboxes - but not the text fields - on failed validation when a new user is being created, but resets nothing at all when an existing user is being edited? I'd like it to reset none of the information when a new user is being created, but I cannot figure out the reason for this inconsistent behavior.
If anyone can help me figure out how to get this working so that nothing gets reset - or at least explain to me the reason for this inconsistent behavior - I would be very grateful. I will also try to provide any additional information I can if this isn't enough.So what you are saying is that radio and checkboxes don't retain their state when validation fails?
Checkboxes are always troublesome because of their design. If not selected, they don't submit any value - so you have to specifically unset them.
My first instinct would be to look at the formbean which you are populating from, and see what (if anything) modifies its values.
- for originally loading the new user page is it an action or JSP? Does it apply any default values to the form?
- check the "input" page you redirect to when validation fails. Is it an action or a JSP?
- is the same form being uses on the newUser jsp and whatever action you are submitting it to?
- is there a form reset() method?
My theory is that the "input" page you are redirecting to when validation fails is an action, and it sets some values on the form prior to loading.
But thats just a guess at this point. Its hard to debug this without a working example. Its been a while since I worked with struts, and never with annotations providing the validation.
Suggestion for debugging: dump the contents of the form bean at strategic points in the process to see that the values are what you think they should be.
- running the save action
- just after validation
- on the jsp page.
Hope this helps some,
evnafets -
You must supply a valid User Name and Password to log onto the system
he installing Hyperion 9.3.1 on a server, I installed and tested successfully Shared Services, Essbase Administration Services, Essbase Server, Essbase Client ........ my problem is when installing Reporting and Analysis
Services and installed without problems UIServices in confuguratio utility comes a list of products to configure (Financial Reporting, Web Analysis Planning .... .... among others), first configure Financial Reporting and Web Analysis, when done reboot the machine, then wake up coughing the service entrance to http://localhost:45000/workspace, correspontiente and I get this message "you must supply a valid User Name and Password to log onto the system"
I need an urgent solution k and the above does not work until the time
or failing to address where we can solve thisHi,
First of all really you should be going through the webserver plugin port if you want to access the other components through workspace.
e.g. http://localhost:19000/workspace
If you entering the correct login details and the account you are using is provisioned then you could check out what information is in the logs :- \Hyperion\logs\BIPlus\SharedServices_Security_Client.log
Cheers
John
http://john-goodwin.blogspot.com/ -
Mitigation control: Sending failed No valid SAP sender address
GRC 5.3 SP10 RAR
In mitigation control: I have created a new control ID. When I am trying to assign it to a user getting error
"Sending failed No valid SAP sender address"
Please advise to resolve the issue. I need to mitigate user.Hello Pal,
Please go to RAR configuration -> Risk Analysis -> Additional Options. Here check if you have the parameter Enable Monitor Notification set to YES. If you do then set this one to NO. Also, kindly check and make sure that you have a valid email address maintained for each of the mitigation control monitor in Mitigation tab.
If you wish to have the parameter set to yes only then you need to do the JAVA mail settings in Visual Admin. Check configuration of the JAVA mail client, which can be done using Visual Administrator, to send the Email Notification.
(Configuration > Java Mail Client > Properties > Smtp).
Regards, Varun
Edited by: Thakur Varun on May 21, 2010 3:47 PM -
ORA-04098 trigger"BANKTRAN_BEF_DEL" is invalid and and failed re-validation
Hey Experts,
I created follwoing trigger successfully...
create or replace trigger BANKTRAN_BEF_DEL
before delete on BANKTRAN
declare
weekend_error EXCEPTION;
not_authentocated_user EXCEPTION;
begin
if TO_CHAR(SysDate,'DY') = 'SAT' or TO_CHAR(SysDate,'DY') = 'SUN' THEN
RAISE weekend_error;
end if;
if SUBSTR(User,1,3) <> 'ATN' THEN
RAISE not_authentocated_user ;
end if;
EXCEPTION
WHEN weekend_error THEN
RAISE_APPLICATION_ERROR (-20001,
'Deletions not allowed on weekends');
WHEN not_authentocated_user THEN
RAISE_APPLICATION_ERROR (-20002,
'Deletions only allowed by authentocated users');
end;
but when deleting the records using query delete from BANKTRAN
getting the below error
ORA-04098 trigger"BANKTRAN_BEF_DEL" is invalid and and failed re-validation
Edited by: SShubhangi on Jan 7, 2013 4:21 PMAlright.
Now Try the DML that causes the Trigger to fire.
And post the details.
PS:- Please use {noformat}{noformat} before and after the SQL statements/results or code samples.
It makes post more readable and you get better help. -
Trouble with notifications - failed schema validation
I am trying to send an Email notification from a workflow and am getting the following error:
System.Web.Services: System.Web.Services.Protocols.SoapException: The request failed schema validation: The element 'Message' in namespace 'http://schemas.microsoft.com/exchange/services/2006/types' has invalid child element 'Header' in namespace 'http://schemas.xmlsoap.org/soap/envelope/'.
List of possible elements expected: 'Sensitivity, Body, Attachments, DateTimeReceived, Size, Categories, Importance, InReplyTo, IsSubmitted, IsDraft, IsFromMe, IsResend, IsUnmodified, InternetMessageHeaders, DateTimeSent, DateTimeCreated, ResponseObjects,
ReminderDueBy, ReminderIsSet, ReminderMinutesBeforeStart, DisplayCc, DisplayTo, HasAttachments, ExtendedProperty, Culture, Sender, ToRecipients, CcRecipients, BccRecipients, IsReadReceiptRequested, IsDeliveryReceiptRequested, ConversationIndex, ConversationTopic,
From, InternetMessageId, IsRead, IsResponseRequested, References, ReplyTo' in namespace 'http://schemas.microsoft.com/exchange/services/2006/types'.
at System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall)
at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters)
at Microsoft.ResourceManagement.WebServices.Mail.Exchange.ExchangeServiceBinding.CreateItem(CreateItemType CreateItem1)
at Microsoft.ResourceManagement.Mail.ExchangeProxy.ExecuteCreateItem(CreateItemType request)
at Microsoft.ResourceManagement.Mail.ExchangeServer.SendNotification(NotificationMessage message)
at Microsoft.ResourceManagement.Mail.NotificationMessage.Send(Int32 timeoutInMilliseconds)
at Microsoft.ResourceManagement.Workflow.Hosting.SendMailWorkItemProcessor.SendMailMessage(MessageContent messageContent, Int32 timeoutInMilliseconds)
at Microsoft.ResourceManagement.Workflow.Hosting.SendMailWorkItemProcessor.ProcessWorkItem(WorkItem workItem
It appears that the Exchange web service doesn't like the schema FIM is presenting. Anyone seen this? Is there a trace setting that will dump out the call to the Exchange
server?
I have tested that I can hit
https://fqdn_server/ews/exchange.asmx
from the FIM Service account and the certificate is correct.After getting product support involved, it turns out that we were pointing the FIM Service at an Exchange 2013 server but the mailbox had been created on and was physically stored on an Exchange 2010 server. By pointing FIM at the 2010 server or by trying
to send notifications to mailboxes on the 2013 server, we could make it work. Moving the mailbox from the 2010 server to the 2013 server did not solve the problem. It had something to do with mailboxes that were originally created on a 2010 server but
were accessed over EWS from a 2013 server.
It also was not a FIM issue. We used an EWS diagnostic tool (EWSEditor) to test outside of FIM and saw the same results.
The final result to get the specific user working for notifications was to create a new mailbox for them on the Exchange 2013 server. -
Job scheduling failed because the user has no permission to access this rep
Hi. I've OBIP 10.1.3.4.1.
When I launch a print with the scheduler I see this error:
oracle.apps.xdo.servlet.scheduler.ProcessingException: Job scheduling failed because the user has no permission to access this report. [REPORT_URL]=[folderreport/report/report.xdo], [USERNAME]=[administrator]
at oracle.apps.xdo.servlet.ui.scheduler.SchedulerServlet.scheduleJob(SchedulerServlet.java:1140)
at oracle.apps.xdo.servlet.ui.scheduler.SchedulerServlet.doPost(SchedulerServlet.java:295)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:763)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:64)
at oracle.apps.xdo.servlet.security.SecurityFilter.doFilter(SecurityFilter.java:100)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:621)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:368)
at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:866)
at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:448)
at com.evermind.server.http.HttpRequestHandler.serveOneRequest(HttpRequestHandler.java:216)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:117)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:110)
at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
at oracle.oc4j.network.ServerSocketAcceptHandler.procClientSocket(ServerSocketAcceptHandler.java:239)
at oracle.oc4j.network.ServerSocketAcceptHandler.access$700(ServerSocketAcceptHandler.java:34)
at oracle.oc4j.network.ServerSocketAcceptHandler$AcceptHandlerHorse.run(ServerSocketAcceptHandler.java:880)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
at java.lang.Thread.run(Thread.java:595)
In this env. I've a LDAP Security Model and all the report and all the users work.Please check whether you have assigned below responsibility to the user trying to schedule report.
XMLP_SCHEDULER -
Tacacs authentication fails for one user account for only one switch
Hi,
I am having an scenario, where as Tacacs authentication fails for one user account for only one switch.
The same user account works well for other devices.
The AAA configs are same on every devices in the network.
Heres the show tacacs output from the switch where only one user account fails;
Socket opens: 157
Socket closes: 156
Socket aborts: 303
Socket errors: 1
Socket Timeouts: 2
Failed Connect Attempts: 0
Total Packets Sent: 1703
Total Packets Recv: 1243
Expected Replies: 0
What could be the reason ?
No errors on ACS server; same rights had been given to the user account.
Thanks to advise.
PraseyHi there,
Does the user get authenticated in the ACS logs?
reports and activity----> failed attempts
ro
reports and activity-----> passed authentications
That will help narrow it down.
Brad -
I am running an environment with an Active Directory and Terminal Servers.
I have searched high and low for resolutions to this error but I cannot find anything related to my situation, let me explain further.
The fixes I found are related to local users only.
When I create a new user in the Active Directory I provide the paths to the profile folder in the "Remote Desktop Profile" and "Profile tab" lets say for example \\ad001\home\%username% and \\ad001\profil\%username% .
I give rights to the user to read/write the "home" folder which is mapped for folder redirection. An I know that when the user first logs on it should create a "v2.%username%" folder upon successful logon. This is when I am
presented with the error message below:
"The registration of the service "User Profile Service" has failed.
The user profile can not be loaded"
Does anyone have any experience with this or know a suitable fix. Again this is for the "Roaming" profile creation no local.
Many thanks in advance.Hi,
Thank you for posting in Windows Server Forum.
Did you receive for any one user or for all users?
Have you tried to solve the issue by fixing the user account profile?
For that you can adjust the registry setting “ProfileImagePath” with
particular SID of that user under below mention path.
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList
Also if this can’t resolve the issue you can try to delete the SID of that user or renaming the old and and then check the result again by creating new profile for that users.
More information.
You receive a "The User Profile Service failed the logon” error message
http://support.microsoft.com/kb/947215
Hope it helps!
Thanks.
Dharmesh Solanki -
TFS says {oldaccount} is not a member of the Team Foundation Valid Users group, but I am
I'm trying to check in changes to TFS using VS2013. When I hit the submit button, TFS returns the following error, "TF14002: The identity {domain} \ {oldaccount} is not a member of the Team Foundation Valid Users group."
Background: my account name has been changed to {newaccount} from {oldaccount}. And when the sys-admins changed my account name they did not update my computer itself, so I'm still using C:\Users\{oldaccount}. I can't believe that would make a difference
but you never know....
When I first started working at this company I'm almost certain I set up my TFS Workspace with my old account. But I thought I deleted all that stuff related to my old account and reset everything to my new account (Workspaces and TFS server). My lead tech
has even shown me the account mgmnt screen with my new account name. And I've been able to check out items with my new account name.
I performed the following steps to try to "clean out" TFS:
• I copied all of my changed files to a back-up location.
• I undid all changes in TFS (note that TFS has been allowing me to check out files to edit).
• I deleted the TFS entry in Credential Manager per a suggestion online.
• I deleted my Workspace.
• I even deleted my TFS server.
• I Rebooted my computer.
• I reconnected to the TFS server.
• I rebuilt my Workspace.
• I restored my changed files from my back-up location.
At this point I tried checking-in my changes again but got the same error message as above.
Next, I deleted everything in this folder:
C:\Users\ ...\AppData\Local\Microsoft\Team Foundation\5.0\Cache
... but I'm still seeing the error.
Also, we'd been informed that a number of us need to downgrade from "Ultimate" to "Professional". I did my downgrade to VS2013 Pro (after the steps above) but I am still seeing the same error.
A comment on another question
here suggested that I shelve my changes without preserving changes locally, then un-shelve and attempt to check-in. This also did not work, I could shelve my changes and un-shelve, but doing so did not fix the original problem.
Note that I do NOT have access to the TFS server itself - much less permissions to perform any sort of admin on it (and I don't know the person who would) - but might there be a table in the TFS database that still has an entry for my old account that could
be joining to my computer name &/or new account name when TFS goes to look up my account info when I check in my changes? I am getting desperate for an answer!
Any suggestions?
Thanks,
D. KelleyHi D. Kelley,
Thanks for the details. Based on your description, you might need to change or update the SID for users. Try identity command to change the username if you never use the new username in TFS. Check this page for more information about
identities command in this
page.
You can also check the table "tbl_Identity" in the tfs_configuration database to see if the new user exists, or it has the old user. Another option is have a check on other machines to see if it works fine. Refer to links below for more information:
https://social.msdn.microsoft.com/Forums/en-US/93568425-a877-4d21-8497-1adc4561b6d3/unable-to-check-in-code-to-tfs-due-to-tf14002-the-identity-old-user-name-is-not-a-member-of-the?forum=tfsversioncontrol
https://social.msdn.microsoft.com/Forums/en-US/acc56859-624f-41bc-b698-cbb5e0b8f525/cant-check-in-code-the-identity-devoldusername-is-not-a-member-of-the-team-foundation-valid?forum=tfsversioncontrol
Best regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Analytical Services failed to get user's parent group tree with Error
Hi,
We have a frequent errror during our weekly batch for an application.
The context:
- Essbase Administration Services we are using is version is 9.3.1.
- 8 applications are calculated during the week-end. The scripts executed are exactly the same for the 8 applications.
- For example let's say that 5 scripts are launched during the night in the batch for each application (script 1, script 2 ... script 5)
- App1 and App2 are launched alone and before the 6 others applications as these applications database are 3 x bigger (App1 is calculated alone, then app2 is calculated alone, then app3 to app8 scripts are launched in the same time).
The issue :
- We don't see any issue for app3 to app8, the calculation are executed without any problem from script1 to script5.
- But we have an error in App1 and App2 log when the bath execute script 4 and we see the following error in the server log **
"Analytical Services failed to get user's parent group tree with Error".
(** : we don't see any log for script 4 in the application log - it's like the server bypass script 4 to go directly from script 3 to script 5 )
Nothing special is done in script 4 but just an aggregation of the Year dimension (using a @SUM(@RELATIVE(Year,0)) calculation.
I think that there is may be a synchronization error with Shared Services but what is strange is that it's always for the same script 4 and the batch is launched at different time every week-end.
Can the issue be linked to the size of the database of applications (8 Gb) and difficulties for the processor to executes aggregation in a large database volume ?Hi,
According to your description, my understanding is that the error occurred when sending an email to the user in workflow.
Did you delete the existing Connections before setting NetBiosDomainNamesEnabled?
If not, I recommend to delete and recreate your AD connections, then set NetBiosDomainNamesEnabled to true.
Or you can delete the original User Profile Service Application and create a new one, then set the NetBiosDomainNamesEnabled to true and start the User Profile Service Application
synchronization.
More reference:
http://social.technet.microsoft.com/wiki/contents/articles/18060.sharepoint-20xx-what-if-the-domain-netbios-name-is-different-than-the-fqdn-of-the-domain-with-user-profile.aspx
Best regards.
Thanks
Victoria Xia
TechNet Community Support -
Good Afternoon Everyone,
I am not technologically savvy as a result I'm having trouble understanding previous posts on "The user profile service service failed to logon user profile cannot be loaded." Lingo on domain reset etc, not sure that this pertains to solving my issue
... I cant even get pass the sign in page let alone make changes. I am having this issue with my Dell Studio XPS 1340 with Windows 7 Home Premium. If anyone can provide their two cents I would greatly appreciate.
Very Respectfully,
Jesse"Jesse.soto1" wrote in message news:1e164fdf-7370-45c0-9bc7-3b58278121c3...
Good Afternoon Everyone,
I am not technologically savvy as a result I'm having trouble understanding previous posts on "The user profile service service failed to logon user profile cannot be loaded." Lingo on domain reset etc, not sure that this pertains to solving my issue
... I cant even get pass the sign in page let alone make changes. I am having this issue with my Dell Studio XPS 1340 with Windows 7 Home Premium. If anyone can provide their two cents I would greatly appreciate.
Very Respectfully,
Jesse
Home Premium cannot logon to a Domain, nor can it be set to try it.
when you get the logon window, try hitting the three-finger salute )Ctrl+Alt+Del) twice – it may bring up the old-style login window – enter your credentials there.
Noel Paton | Nil Carborundum Illegitemi |
CrashFixPC | The Three-toed Sloth -
Profit Center Master Data - Validation - User Exit
Hi,
I need to add few validation to the profit center master data. If there is any user exit that I can use or is there any validation like OB28 (we have for financial accounting document) that can be used.
Please help me out.
Regards,
Binay AgarwalWe are on version 4.6C. Requirement is that while creating profit center, two fields, Budget Holder and CC Board Member field should be updated via some valid user id that exist in SAP.
This user id would be used in work flow. This fields are free field and would accept anydata. But subsequent processes would be hindered. Same thing has been implemented for Cost center and we were able to get hold of user exit but I am struggling to find the same for profit center.
As far as I am aware there might not be any user exit for KE51 tcode. Now only point is is there any other way (like validation) which can be setup before the data us saved so that we have control over the data being saved in these two fields.
Regards,
Binay Agarwal -
Validation user exit at asset master data
hi all,
at asset master data creation level, if you want to validate company code vs asset class vs equipment type, how do you define validation user exit? Also, we have so many company codes. Do we have to individually validate rules for each and every company code?
Regards,
RobHope the below user exits are useful:
AAPM0001 |Integration of asset accounting and plant maintenance
AINT0001 |Extended checks when posting an asset
AIST0002 |Customer fields in asset master
Pls assign points as wa to say thanks
Maybe you are looking for
-
When I double click on videos in iPhoto, they don't play
I have a problem on that now I have installed iLife 09 (and don't even go there suggesting I install iLife 11), it will not play videos in Quicktime anymore, even when downloaded from my iPhone 4 camera roll. I have Quicktime Player 7 Pro installed..
-
How to insert a carriage return/line feed in a TextEdit without using wrap
Hi, The string that I want to pass to the textedit is "Order Notes : bla bla bla Shipping notes : bla bla bla" The length of Order notes and shipping notes can vary. I am using wrapping. But I need to insert a line feed just before Shipping Notes so
-
Is annotation for a hyperlink to another video is possible from the original video?
hi there, i have been working on Adobe Presenter trail period for a while and thanks to adobe it's a tremendous help. i have a doubt- is it possible to hyperlink to another video from the original video. i.e after creating a video i want to integrat
-
All photos duplicated after restoring Photoshop Elements 11 catalog
I recently had my computer reformatted and notice that following Photoshop Elements reinstall and catalog restore all my photos have been duplicated in the Adobe/digital photos folder. I have read that this is due to my computer tech restoring all ph
-
How do I import MTS video files from my Sony Handycam HDR-CX160E into Premiere Elements Quick Editor?