Closed period for Material Record

Hi,
I did MIGO: 101
-document day: 26.09.2010
-posting day: 26.09.2010
everything is ok and i verify ,  I get this message :Only possible to post  periods 2010/09 and 2010/08 for company 0211
So i Checked
1. - MMPV   (LOG) : seems to be ok
-Incorrect period in control rec. of CoCd 0002; no conversion
-The current period (month/year) of the control record is092010
- Period closing complete; log issued.u201D
2.- OMSY, seems to be ok
Co     Co name     year     Pe     Fyr     M     Fyr     LM     ABp
0002     xxxxx     2010     9     2010     8     2009     12     x 
3.- OB52 : seems to be ok
0002     +              1     2010     12     2010     13     2010     16     2010
0002     A ZZZZZZ     1     2010     12     2010     13     2010     16     2010
0002     D ZZZZZZ     1     2010     12     2010     13     2010     16     2010
0002     K ZZZZZZ     1     2010     12     2010     13     2010     16     2010
0002     M ZZZZZZ     1     2010     12     2010     13     2010     16     2010
4.-  OB37 seems to be ok but i have a doubt in V6 if it is causing the problem?  but V6 is the correct selection
0002     XXXXXXXXX      V6     July-June, 4 períods spec.
5.- Table MARV seems to be OK
0002     2010            09             2010           08           2009           12            X
Regards,
Edited by: buck485821 on Sep 26, 2010 12:47 PM
Edited by: buck485821 on Sep 26, 2010 1:48 PM
Edited by: buck485821 on Sep 26, 2010 2:01 PM

I found the problem
Fiscal year variant is V6  (oby6) and actual material period is 9 and should be 3 (MMRV)
I am in Development enviorement. Anyone can help me to fix this. , thanks and regards

Similar Messages

  • How to open again the past period for Material?

    Hi All,
    by t.code MMPV, I can close a period for Material.
    I wonder if is possible to turn back.
    Thanks

    hi
    If you want to open previous period for reversal entry or additional entry
    The following are steps for Opening previous period in MM :
    1. Go to TCode SU01 (see OSS NOTES 487381)
    2. Choose "change" tab with your loging Name
    3. Choose "Parameter" tab
    give Parameters MMPI_READ_NOTE with date format as YYYYMMDD
    (say today 20100302)
    4. SAVE.
    5. Go to T-code MMPI
    6. open the old periods which you want to post into,
    Note :
    the period opening will be valid for only for the particular day only.
    7. Complete the posting you want to reverse or add
    8. Go to MMPV to close the periods
    Note :
    If we enter the date or month in MMPV means we are opening that date or month by closing previous date or month
    (Never use MMPV without completing the transaction in previous month)
    POSTING ENTRY INPAST PERIOD IS NOT RECOMENDED check note  487381

  • Tables/FM for opening/closing stock for material on given posting date

    Hi All,
    I had requirement of find the opening/closing stock for material on given posting date. The values we can find out using TCode - MB5B.
    But I cannt use MB5B to extract data because I need to find detials for thousands of material.
    Can you please adivce if their is any FM or tables through which i can find this detial on any given date apart from current date.
    Thanks & Regards,

    Hi,
    [https://forums.sdn.sap.com/click.jspa?searchID=19631709&messageID=6593903]
    [https://forums.sdn.sap.com/click.jspa?searchID=19631709&messageID=6630975]

  • Close period for material Master record error

    my current period is 07 2010.
    I want to close period 07 2010, and make new posting to period 08 2010.
    but when i do the posting, system show error "Posting only possible in periods 2010/07 and 2010/06 in company code C999"
    PS: C999 is the company code that contains the plant P999
    And when i try to close the current period of material Master record  by MMPV, system show below information :
    "L O G
    Mode: Check and close period
    Client: 000
    Period entered (month/year): 07 2010
    Incorrect period in control rec. of CoCd C999; no conversion The current period (month/year) of the control record is 07 2010
    Period closing complete; log issued.
    E N D"
    and my current OB52 setting is below:
    Please help to supply some suggestion.
    P999     +               1     2010     12     2010     13     2010     16     2010
    P999     A          ZZZZZZZZZZ     1     2010     12     2010     13     2010     16     2010
    P999     D          ZZZZZZZZZZ     1     2010     12     2010     13     2010     16     2010
    P999     K          ZZZZZZZZZZ     1     2010     12     2010     13     2010     16     2010
    P999     M          ZZZZZZZZZZ     1     2000     12     2010     13     2000     16     2010
    P999     S          ZZZZZZZZZZ     1     2010     12     2010     13     2010     16     2010
    V001     +               1     2000     12     2010     13     2000     16     2010

    Hi,
    Check in T.code: MMRV and see which period is open for ur Co.Code and back posting is allowed or not. If you are sure to open new period now of  new posting to period 08, then
    use t.code: MMPV ,
    enter
    Company code C999
    Period to open 08
    Fiscal Year 2010
    Execute
    ( system will close the period last period 07 and automatically system open the new one 08)
    Now try ur transaction.
    if any problem, then check  in FI Side:
    Use t.code: OB52 and open the 08,2010 period in Account Types A, K, D,M, S and specially Account Type u201C+u201D which stands for valid for all accounts type and save. Better consult FICO consultant for OB52 step.
    Regards,
    Biju K

  • Setting period for MM record (about invalid period)

    Hi,Experts!
    I create a new company code "Y001" and try to assign MM periods to the company code.
    When I try to customize MM period using t-cds,MMPI and OMSY, but I take the error "You have entered an invalid period for company code Y001" in both of them.
    Now I set :
    ･Fiscal year variant(t-cd:OB29/OB37): V3
    ･Variant for open posting periods: Y001
    ･Open and close posting periods: Y001 ＋ 02 2009 12 9999 2 2009 12 9999 ADMIN
    I try to set:
    ･Material Management view on company codes(OMSY or MMPI):2009 02
    Do you have knowledge of the error? And What's an invalid period?
    I am just starting to study ECC, so I have only poor knowledge about it.
    Thanks.

    Hi,
    First goto OBBP t.code and choose your company code and check what is the posting period variants, then goto OKKP t.code and choose your company code and click details button , where you can find fiscal year variant , if it is V3 means april - march.
    Now check in OB52 t.code choose your posting period variant (which is in OBBP) check the period open, it must be 02-2009.
    regards,
    abi

  • Need to create report query to get latest open and last closed period for given application

    Hi All,
    I need to create a report query to get below result displayed in report output.
    1)   -   Application name
    2)   -    Ledger name
    -o/  -Operating Unit
    3)   -  Last Closed Period
    4)   -  Current Open Period
    5)   -  Date Closed – Last Closed Period
    6)   -  Date Open – Current Open Period
    I tr I tried to create the query below is the same. Please let me know if it looks fine.
    SELECT *
      FROM (SELECT fav.application_name ,
                   hou.name Operating_Unit_Name,
                   gl.name Ledger_name,
                   gl.latest_opened_period_name,
                   gps.period_name Period_Name,
                   DECODE(gps.closing_status, 'O', 'Open', 'C', 'Closed') status,
                   gps.last_update_date Last_status_modified_date
              FROM gl_period_statuses gps,
                   gl_sets_of_books   gsob,
                   fnd_application_vl fav,
                   hr_operating_units hou,
                   gl_ledgers         gl
             WHERE gps.period_name = gps.period_name
               AND gps.closing_status ='C'
               AND fav.application_short_name =
                   NVL('&p_application_short_name', fav.application_short_name)
               AND gps.application_id = fav.application_id
               AND gsob.set_of_books_id = gps.set_of_books_id
               AND hou.set_of_books_id = gps.set_of_books_id
               AND gl.ledger_id = gsob.set_of_books_id
               AND hou.organization_id=NVL('&p_operating_unit',hou.organization_id)
               AND gl.ledger_id=NVL('&p_ledger_id',gl.ledger_id) 
             ORDER BY gps.last_update_date desc )WHERE ROWNUM = 1 
    UNION ALL
    SELECT *
      FROM (SELECT fav.application_name Application_Name,
                   hou.name Operating_Unit_Name,
                   gl.name Ledger_name,
                   gl.latest_opened_period_name,
                   gps.period_name Period_Name,
                   DECODE(gps.closing_status, 'O', 'Open', 'C', 'Closed') status,
                   gps.last_update_date Last_status_modified_date
              FROM gl_period_statuses gps,
                   gl_sets_of_books   gsob,
                   fnd_application_vl fav,
                   hr_operating_units hou,
                   gl_ledgers         gl
             WHERE gps.period_name = gps.period_name
               AND gps.closing_status = 'O'
               AND fav.application_short_name =
                   NVL('&p_application_short_name', fav.application_short_name)
               AND gps.application_id = fav.application_id
               AND gsob.set_of_books_id = gps.set_of_books_id
               AND hou.set_of_books_id = gps.set_of_books_id
               AND gl.ledger_id = gsob.set_of_books_id
               AND hou.organization_id=NVL('&p_operating_unit',hou.organization_id)
               AND gl.ledger_id=NVL('&p_ledger_id',gl.ledger_id) 
             ORDER BY gps.last_update_date desc)
             WHERE ROWNUM = 1

    It is within the table I believe (I'm not a DBA or a developer) since I created a BLOB column and then used the file browse feature to allow users to attach a resume to the table in order to be able to perform a search of the attached documents.
    I'm just having a hard time pointing the link in the search results report to the document in the blob column.
    The information on that page is great if you're trying to create a link to the document on the initial report.
    But I created a query using Oracle Text to run a report that does a boolean search of the attached word documents in the table.
    When it displays the search results, it doesn't create a link to the document and I can't figure out how to do it.
    Here's a link the the instructions I used to create the initial search report with Oracle Text, mind you I only created the index and query, I didn't add in all the link data since they're using documents on websites and I'm using documents in a table.
    http://www.oracle.com/technology/products/database/application_express/pdf/apex_text_application_v1.6.pdf
    If you can help me with this I'd really appreciate it.
    Thanks again.
    Greg
    Edited by: gjones77 on Dec 2, 2008 8:14 AM

  • Problem with MMPV(close period for material master records)

    Hy,
    I'm really stuck in this weird problem.
    I have already open 04.2008 period in MMPV  and in MIGO transaction I got this error message:
    Document date lies in the future.
    Posting period 004 2008 is not open.
    What should I do?
    Please, someone help me.

    First check the date in MIGO transaction.... is it current date ?
                                                                                  (April's )
    and then
    go to OBBP  and check the posting period variant,
                           of your Company code..
    Now, go to OB52  and check the periods, they should be in
                               year 2008 for your posting period variant..

  • Open Period for material master record

    Hi gurús
                    We´d just create a new company code and plant. After the activation of ML we started to make some materiales movements, but the system show the error message "Posting only possible in period XXX".
    Whe we opened the period through MMPV tcode system confirm us that the last period open is 06/2005. But the company code and plant was created after that date (11/2009).
    How it is possible? From where the system is taking the date?
    Thanks in advance for the help
    Regards
    Enzo

    Hi,
    See the date came as from which Company code your Company is Created, as well the Factory calender Might be Copied with the Calender and never Started the Update program. there are many reason's it happens.
    So one thing As Your ABAPer to Try execute the program RMMMPERI upto today's Period. so that you can be able to do the process.
    as Well as ABAPer to maintain background job through SM38 for program RMMMPERI in SAP so that you will never found the place to update the periods per month.
    Regards,
    Ninad Kshirsagar

  • FM for Opening And Closing Stock for Material

    Dear All,
        I need to Calculate the opening and closing stock of the material. If there is any FM for the same just let me know and if not kindly let me know the way out.
    Regards
    Amit

    Hi!
    The closing stock can be found in the MARD table.
    And the opening stock should be always zero.
    I think you wanted to know the yearly/monthly closing/opening stocks, then you have to gather all material documents from MKPF, MSEG tables, and calculate the stock, using the actual stock and subtract/add (depends on the movement type) the material document's quantity, until the given date.
    I don't know any FMs for this, maybe someone could tell you one...
    Regards
    Tamá

  • Period for material

    Dear all,
    There's a material docs created in Sep, but in Oct, we reversed the docs, post to Sep wrongly, then it impact our statement in Sep, which is not allowed, then we need to reverse the reversed docs again in Sep, but today we hv open the Nov material period,can't post any documents in Sep now, so can you tell me how to solve this problem?
    thanks in advance.looking forward your kind reply.

    Hi,
    Your Posting period open is November(11) now, So U can post only in October(10) and November(11) .This you can check in T.Code: MMRV.So You can not post in September(09) in MM side.In MM side you can post only current period and cureent minus one period.If really needed ask your FICO Consultant to post in FI Side by using OB52.
    You can follow the SAP Note:487381 for your requirement also.
    If helpful to you,then reward.
    With Regards,
    Biju K

  • Display overlap of period for each record.

    Hi All,
    I have a report in which I have 2 date columns(start date say 'a' and end date say 'b'). In my prompts i have selected a time range. My start date and end date will fall in this time range.
    Time range is 1/5/2009 to 3/16/2009
    Start Date     End Date          1/5/2009     1/12/2009     1/19/2009     1/26/2009     2/2/2009     2/9/2009     2/16/2009     2/23/2009     3/2/2009     3/9/2009     3/16/2009
    1/19/2009     6/8/2009          0     0     1     1     1     1     1     1     1     1     1
    4/20/2009     5/25/2009          0     0     0     0     0     0     0     0     0     0     0
    3/16/2009     5/18/2009          0     0     0     0     0     0     0     0     0     0     1
    1/19/2009     6/8/2009          0     0     1     1     1     1     1     1     1     1     1
    1/5/2009     3/8/2009          1     1     1     1     1     1     1     1     1     0     0
    3/16/2009     5/18/2009          0     0     0     0     0     0     0     0     0     0     1
    As shown above I need to stamp '0' if the week(horizontal row) doesn't fall in the a-b time range and '1' if it falls.
    How can I achieve this .
    Thanks and regards,

    Very tricky but it can be done.
    1- create view which returns all the week start date between the prompts (if you are on oracle play around with a select againts the ALL_OBJECTS).
    2 Bring this view as a dimension in your RPD and create a dummy join againts your fact table.
    3. In your report use a case when to determine if your period is valid or not.
    4. put it in a pivot table.
    regards
    John
    http://obiee101.blogspot.com/
    Edited by: John Minkjan on Jun 26, 2009 6:03 AM

  • Open an already closed period

    Is it possible to open an already closed posting period? If yes, how? And is it recommended to open any closed period?
    Thanks in Advance

    Hello,
    There are two different places where  the period is closed in SAP.
    a. FI period
    Use transaction OB52.
    b. MM period - MMPI
    The help extract for the same is given below for your reference:
    Short text
    Initialize Period for Material Master Records
    Description
    This program must be viewed in conjunction with the period closing program (RMMMPERI). It does the following:
    Sets the current period
    However, do not use this program to set the new period at the end of a period, and use it only in addition to the period closing program, never instead of it.
    Creates or updates the control record
    Makes it possible to create material master records if you are initializing a company code for the first time
    However, to initialize company codes, you are recommended using the IMG activity Maintain company codes for materials management instead of this program.
    You can also use this program to correct data inconsistencies, for example, due to user errors when running the period closing program, or that occur as a result of skipping several periods in a test system. However, first make sure you understand why the inconsistency arose and then decide whether running this program is the correct way of resolving it.
    Caution
    Be careful if the period used for initialization precedes the current period in the control record for the company code since this can result in an inconsistency between goods movements and material master segments. This is because the stock information in the material master segments is assigned to the new current period in this case (see the following example).
    Example
    Current period 02
    Opening stock balance 0 pieces
    Goods receipt 10 pieces
    Period used for initialization 01
    According to the material master segment, there are 10 pieces in stock in period 01, although 10 pieces were posted to stock in period 02 according to the goods movement document.

  • MMPV - is Cost center assessment possible after closing period in MMPV?

    Hi,
    We are performing MMPV for April, which will close automatically postings for February. As far as I know MMPV opens and closes periods for MM postings only. Is that true?
    I would like to perform Cost center assesment and CC assessment to COPA for february after I run MMPV. Will the system allow me to do that or due to the fact that february is closed in MM it won't be possible.
    Thanks for your help,
    Regards,
    Karol

    Hi
    What you feel is right as MMPV related to close the period for material document positing . To run the assessment cycle (KSU5) Co and Fi periods are required to be kept open.
    If the answer is helpful kindly assign points
    Thanks & Regards
    Mahesh

  • Run CKMLCP (material ledger cockpit) for closed period in MMPV

    Hi,
    I would like to run CKMLCP for period 12.2008, however MMPV was run in 02.2009, and only january and fabruary 2009 are allowed for material postings.
    How can I settle material ledger in 12.2008? I know about note 361236 (CKMLCP: No period-end closing operations after period shift), but don't know if this will do all the proper postings or only close 12.2008 technically.
    Regards,
    Karol

    Hi Carol ,
    Please remeber costing Run i.e CKLMCP is a closing activity so it should be done only at the time of closing a particular period .A syou said two periods are open for MM but costing also post some Accounting enteries if FI period is closed the its not possible.
    And its not recommended to run costing any time in middle of the period.
    Thanks
    Deepa

  • Open a previous period in material master record

    I'm working in a test system and current period was closed and so was the next period. So period 3/2008 is closed, period 4/2008 is closed, and now 5/2008 is the current period. I know I can post to the previous period but that doesn't help me because I need to post for 3/2008.
    My question is can I reopen 3/2008? If so what is the potiential problems I'll run into if I do?
    Thanks,
    Matt

    Hi,
    NOTE: Involve also FICO Consultant and collect all the documents before proceeding.
    MMRV: to check which period is open & also set back posting allowed,
    MMPV: to open the period.
    It is possible to re-open a previously closed period. However, it is NOT advisable to do so because the valuation data of the previous period could be affected.
    In general, it is only safe to reopen a previously closed period when no material postings have been done after the period shifting to the new period.If there has already been a posting after the period shifting to the new period, reverting the period back will cause database inconsistencies in the history tables.
    If you decide to proceed with this process, you can use the program RMMMINIT, but, please review the documentation of this program first!! and the check the SAP notes 487381 (for the error message that you are receiving) and the 369637 (for an explanation about the inconsistencies that will be generated.
    Steps are as below;
    Go to Transaction Code SE38
    Enter program name RMMMINIT
    Execute or press F8 function button
    Enter your company code (From and To)
    Enter relevant date: Say 01/02/2008 for Feb. 2008 month to be opened as of now
    That means, user can post for the month of Jan 2008 as well as Feb. 2008
    Refer SAP Note No. 487381 for more details.
    As per SAP Notes 487381 ( If the periods are opened in advance in mmpv to again change it to current period the following process should be follow ), Go to Tcode MMPI, then go to menu bar and select system -> user profile->owndata.In that screen , under the parameters tab enter MMPI_READ_NOTE in Parameter ID field and enter, then under short description you will get Initialise period. Next Save.
    Again go to MMPI enter company code, period and year and execute.
    OR
    NOT ADVICEABLE THIS METHOD, ONLY TRY IN SANDBOX NOT IN RUNNING SYSTEM OR TEST SYSTEM1.
    Use T.codes:
    1.OX18, and delete the plants assigned to your CO.CD and save.
    2. Use t.code: OMSY and change the posting period to the one u want and save.
    3. Use t.code:OX18 and assign the plants you have deleted in step 1.and save.
    Regards,
    Biju K

Maybe you are looking for