Cmd+shift+4 screenshot files do get created on Leopard??

Hi, I have a fresh install of Leopard that has since been "software updated" to 10.5.1.
When I cmdshift4 to create a screen shot, I get the screen area selector, and I hear the little camera shutter noise, but no files are created. In Tiger I used to get screenshot files created on my desktop "Picture 1", "Picture 2", and so on. But now I get nothing.
Using spotlight to search, the file don't appear to be anywhere on my system. I've reverted to using Grab to take screenshots which isn't nearly as quick and easy as the cmd-shift-4 key combination. (By the way, I'm logged in as a user who does not have admin capabilities, if that makes a difference.)
Is this functionality broken in Leopard? Any help is greatly appreciated,
slegge

Typed 'screencapture test', heard the camera noise, and saw the following output (below). It appeared to create a file called '.test-k1Xg' in my home folder.
CPE0016cb894156-CM000a735f6199:~ stephen$ screencapture test
2007-12-02 02:40:26.595 screencapture[4079:10b] * _NSAutoreleaseNoPool(): Object 0x10fe90 of class NSCFString autoreleased with no pool in place - just leaking
Stack: (0x9524927f 0x95156962 0x90122311 0x9012237d 0x901223d1 0x90120a6c 0x90120b32 0x90085da8 0x2f5b 0x5ef5 0x6213 0x6861)
2007-12-02 02:40:26.597 screencapture[4079:10b] * _NSAutoreleaseNoPool(): Object 0x111380 of class NSCFString autoreleased with no pool in place - just leaking
Stack: (0x9524927f 0x95156962 0x95161aca 0x9012239d 0x901223d1 0x90120a6c 0x90120b32 0x90085da8 0x2f5b 0x5ef5 0x6213 0x6861)
2007-12-02 02:40:26.598 screencapture[4079:10b] * -[NSCFString _getValue:forType:]: unrecognized selector sent to instance 0xa0012a70
2007-12-02 02:40:26.598 screencapture[4079:10b] * _NSAutoreleaseNoPool(): Object 0x1107b0 of class NSCFString autoreleased with no pool in place - just leaking
Stack: (0x9524927f 0x95156962 0x90122311 0x9012237d 0x90122411 0x90120a6c 0x90120b32 0x90085da8 0x2f5b 0x5ef5 0x6213 0x6861)
2007-12-02 02:40:26.599 screencapture[4079:10b] * _NSAutoreleaseNoPool(): Object 0x110cc0 of class NSCFString autoreleased with no pool in place - just leaking
Stack: (0x9524927f 0x95156962 0x95161aca 0x9012239d 0x90122411 0x90120a6c 0x90120b32 0x90085da8 0x2f5b 0x5ef5 0x6213 0x6861)
2007-12-02 02:40:26.599 screencapture[4079:10b] * _NSAutoreleaseNoPool(): Object 0x1107e0 of class NSCFString autoreleased with no pool in place - just leaking
Stack: (0x9524927f 0x95156962 0x95161aca 0x90122432 0x90120a6c 0x90120b32 0x90085da8 0x2f5b 0x5ef5 0x6213 0x6861)
2007-12-02 02:40:26.600 screencapture[4079:10b] * _NSAutoreleaseNoPool(): Object 0x10fcf0 of class NSException autoreleased with no pool in place - just leaking
Stack: (0x9524927f 0x95156962 0x90122462 0x90120a6c 0x90120b32 0x90085da8 0x2f5b 0x5ef5 0x6213 0x6861)
2007-12-02 02:40:26.601 screencapture[4079:10b] * _NSAutoreleaseNoPool(): Object 0x110cf0 of class _NSCallStackArray autoreleased with no pool in place - just leaking
Stack: (0x9524927f 0x95156962 0x951b04f8 0x9011b26b 0x93dc809b 0x9012246a 0x90120a6c 0x90120b32 0x90085da8 0x2f5b 0x5ef5 0x6213 0x6861)
2007-12-02 02:40:26.601 screencapture[4079:10b] * _NSAutoreleaseNoPool(): Object 0x111400 of class NSCFString autoreleased with no pool in place - just leaking
Stack: (0x9524927f 0x95156962 0x95161aca 0x9011b1ee 0x93dc809b 0x9012246a 0x90120a6c 0x90120b32 0x90085da8 0x2f5b 0x5ef5 0x6213 0x6861)
2007-12-02 02:40:26.602 screencapture[4079:10b] * _NSAutoreleaseNoPool(): Object 0x1110b0 of class NSConcreteMutableData autoreleased with no pool in place - just leaking
Stack: (0x9524927f 0x95156962 0x9516abc0 0x9516a921 0x9011b202 0x93dc809b 0x9012246a 0x90120a6c 0x90120b32 0x90085da8 0x2f5b 0x5ef5 0x6213 0x6861)
2007-12-02 02:40:26.603 screencapture[4079:10b] * Terminating app due to uncaught exception 'NSInvalidArgumentException', reason: '* -[NSCFString _getValue:forType:]: unrecognized selector sent to instance 0xa0012a70'
2007-12-02 02:40:26.603 screencapture[4079:10b] Stack: (
2417078891,
2480701595,
2417108074,
2417101420,
2417101618,
2416467368,
12123,
24309,
25107,
26721
Trace/BPT trap
CPE0016cb894156-CM000a735f6199:~ stephen$

Similar Messages

File not getting created in a different server

My requirement.
I have written a code in the BI system and now need to write an empty file (say a.done)in a directory /interfaces of PI system.
I wrote using open data set and close data set however the file (a.done) is not getting created in the PI system even though the directory /interfaces exist.
When I give any directory of that of BI system ,the file(a.done) is getting created i.e the file is getting created on the same server and not on the different server.
Is there any function module or any other way for the file to get generated in the PI system.
Please explain with an example.
Regards,
Vish

Try to use search FTP in se37 or checkout the below FM
CALL FUNCTION 'EPS_FTP_MPUT'
EXPORTING
 RFC_DESTINATION =
* FILE_MASK = ' '
* LOCAL_DIRECTORY = ' '
* REMOTE_DIRECTORY = ' '
* OVERWRITE_MODE = ' '
* TEXT_MODE = ' '
* TRANSMISSION_MONITOR = 'X'
* RECORDS_PER_TRANSFER = 10
* MONITOR_TITLE =
* MONITOR_TEXT1 =
* MONITOR_TEXT2 =
* PROGRESS_TEXT =
* IMPORTING
* LOCAL_DIRECTORY =
* REMOTE_DIRECTORY =
* LOCAL_SYSTEM_INFO =
* REMOTE_SYSTEM_INFO =
* TABLES
* FILE_LIST =
* EXCEPTIONS
* CONNECTION_FAILED = 1
* INVALID_VERSION = 2
* INVALID_ARGUMENTS = 3
* GET_DIR_LIST_FAILED = 4
* FILE_TRANSFER_FAILED = 5
* STOPPED_BY_USER = 6
* OTHERS = 7
IF SY-SUBRC <> 0.
* Implement suitable error handling here
ENDIF.

Empty files are getting created at receiver FTP server

Hi Experts,
I have an Idoc to File scenario where I am sending an XML file to receiver FTP server.
Scenario is working fine but sometimes an empty file is getting generated at receiver FTP server.
I have already selected ignore empty file at receiver channel so issue is not within PI system configuration.
When I checked the message log I can see that almost all the files are getting created successfully without any issues, but
for some files/messages I can see that there are below error logs.
"Transmitting the message to endpoint <local> using connection IDoc_AAE_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: Could not get FTP connection from connection pool (1 connections) within 5,000 milliseconds; increase the number of available connections"
"Exception caught by adapter framework: Could not get FTP connection from connection pool (1 connections) within 5,000 milliseconds; increase the number of available connections."
And after there is again success message log in the same message and it creating a file successfully during that time stamp.
but the third party is sometime receiving empty file which I am not able to find in any trace or log (my file name is SD_timestamp.xml).
Can you please let me know what is the solution and what adjustments FTP server need to do in order to resolve this issue.
Thanks in advance.
Regards,
Rahul Kulkarni

The error you are getting that says "Could not get FTP connection from connection pool (1 connections) within 5,000 milliseconds; increase the number of available connections" has probably nothing to do with the empty files problem.
I second Hareesh Gampa that you first should try "temporary file creation". You might also need to tell the FTP owner that he should only pick up files with that are written completely and that do comply with a negotiated file name schema. The temp file should have another schema of course then. He should not pick up just every file that is written. See here for details
http://help.sap.de/saphelp_nw74/helpdata/en/44/6830e67f2a6d12e10000000a1553f6/content.htm
HTH
Cheers
Jens

.xel file not getting created

Hi All,
I am using 9.1.0.2 version. I archived the xel.log file as it was getting very bigger in size after stopping oim_server through Weblogic console.
I expected that after I start the oim_server all log files will get created automatically.
I see some log files got created when I started OIM application but not xel.log.
Should I create it manually or should it get created automatically?
Thanks in advance,
Manohar

Open log.properties file. You can see entry for xel.log file. Create this file manually and restart OIM server. Make sure you create it manually using the same user, using which you are starting servers.
Alternativley, in log.properties configure loggers and provide there path.xel.log in case entry for xel.log is not there.
regards,
GP

File not getting created in Target Directory..........

Hi All,
We are trying a IDOC-File scenario & trying to create a XML file on the receiver side........All the mappings have been checked & everything is working fine.It shows success in SXMB_MONI. But the file is not getting created at the target directory..... Checked the component Monitoring and message monitoring as well, which is also successful...
What could be the reason of such behaviour, and is there a way to track the where the target file is getting placed?
Please Help
Regards,
Jayashri

>
Jayashri Rade wrote:
> Hi All,
> We are trying a IDOC-File scenario & trying to create a XML file on the receiver side........All the mappings have been checked & everything is working fine.It shows success in SXMB_MONI. But the file is not getting created at the target directory..... Checked the component Monitoring and message monitoring as well, which is also successful...
i
Did you check the receiver communication channel in communication channel monitoring?
Are there any errors?

File not getting created at the Reciever

Hi All,
I have implemented a simeple file to file scenario. The file is getting deleted from the source directory but is not getting created in the target directory. It shows a checkered flag in SXMB_MONI . When i do Communication Channel monitoring for the reciever Comm. Channel, it shows no messsages .
I have refreshed the Cache in Integration directory. it is still not working.
I tried using a different Communication channel with the Mail adapter that is working fine.
I cant figure out what the problem is please help.
Many Thanks,
Neha

Hi! Neha,
Here i want to add some points :
Even I faced same problem in project....... then I followed this procedure...
My scenario is FILE TO RFC via FTP Server in file adapter.
Here issue is file is picking from FTP and showing success in MONI but data is not reaching to BW system..
Most of the times I checked and I did successfully.
Main issue are due to:::
1. Check Queues in Inbound queue SMq2
2. Trace teh step by step in message flow in message monitoring that means check whether message flows
from a) Intergration Engine
b) Adapter Engine..
3. Check and trace the flow in Message monitoring in Run Time work Bench
4. Check Status of Receiver communication Channel in Communication channel Monitoring
5) Check whether Business Services are Scheduled in Availability Time planning or not
6 Also Check in Visual admin whether the services are released or not if any others are might using the same servivcees and cahnnels and suppose if they are scheduled or not
7. Do Cache Refresh mainly SXI CACHE, ADAPTER ENGINE CACHE
8 Finally if still not resolved J2EE ENgine SOFT Restart..instead of doing restarting entire XIengine server.
Once the Server is started then defintely all the messages if suppose if 40 messages are picked from source directory and not reached to Target then all those definetely 100% become success and reached
Note:: All above needs to check only if development part is correctly configured.
Also check the Receiver target and sender directory Permissions in FTP Server i.e., rwx permissions okay
Thanks
Amar Srinivas Eli
Reward Points if useful

IDOC File target - file not getting created

I am using Realtime job for sending idoc from data services to sap. I am using idoc message as source, query and idoc file as target transform in the data flow. I have following settings in IDOC file as target
Idoc file : /tmp/costcentertest.txt
Idoc type: COSMAS01
Data store name: DS_SAP
Application server: saptest
When i send the idoc I can load the data into table or create the file in /tmp directory. After changing target to idoc file and entering the above settings i don't see any file getting created. I do see idoc was received from we05 and also show green in data management console.
I was checking if i have to change something or missing some steps.

Hi Satheesh
Check whether the order qty field is there in flat file or not. Second if the data is there then it is getting uploaded
in read the file or not. Subsequently in converted data . When the mapping is correct and data is getting populated
in read file and converted file it will get uploaded. Hope it will help you.
Thanks
Sushant

Silent Installation - Respond file not getting created !!!

Hi,
I am trying to create a respond file by running the installation as follows
./runInstaller -ignoreSysPrereqs -record -destinationFile /backup/ORA_DOWNLOADS/9201.rsp
ignoreSysPrereqs is used because we have Sun Solaris 5.10 which is not in oraparam.ini.
I am installing 9.2.0.1 Please do not ask why 9.2.0.1 now.
Now the problem is my respond file is not getting created when I run the install. Does the respond file gets created after the installation is complete? I do not want to end up doing installation at one server without the respond file.
Please help.
Thanks,
Ankit.

Hm, you might be hitting a bug. Need to check my archive of historic Oracle events (means, I'll get back when I have looked through my notes in a few hours or more).

HANA auditing, what file types get created?

Hello,
I've read through the blog 'SAP HANA audit trail, best practice' by Frank Buchholz to create audit policies in HANA. Great blog and really appreciate sharing his experience. I've also worked with my hosting team to make audit configuration changes.
They've now asked me to check to see that the policies I've setup are creating records, and they've given me the path to check. The problem I have is I don't know what to look for. What file types are created in the OS SYSLOG by the audit policies? Would the files have the same name as the policies themselves? (self auditing, user SYSTEM, technical users, etc..) Does anyone have a sample with a screenshot to share?
Thanks for the help.
Cheers, Paul

This web site may be a good place to start:
http://www.fileinfo.com/filetypes/common
There are other places that you may search on the Internet that may help close the gap.
Ciao.

Cannot add mailbox database copy to DR site - .edb file not getting created

I have a DR site setup that I want copies of 4 of my mailbox databases. 3 of the mailbox databases copied over successfully but the last and largest one which is really not that large 69Gbs keeps failing when i Update the database copy. Seems
to not be creating the .edb file. Is there another way to get the .edb file over to the server, possibly manually copying it then doing and update database copy? I have my backups turned off on all the servers that have the mailbox role on it now
thinking that was causing some issues with the database copy? Any suggestions is appreciated, thanks.
Michael Duhon

Yes manually copy the edb file and paste them in the DR server . Then try to update with for the incremental of database copy. Verify the database is clean shutdown that you are moving to the DR site.
What error message it throws when you performing update the database copy
Exchange Queries

File not getting created

Hi Frnds,
I have a Idoc to file scenario,
Iam getting following error in RWB
Conversion initialization failed: java.lang.Exception: java.lang.Exception: Error(s) in XML conversion parameters found: Parameter '.fieldFixedLengths' or '.fieldSeparator' is missing
Following are the FCC configured:
Record.fieldFixedLengths     2,4,4,10,2,20,8
Record.fieldNames     RecordType,CompanyCode,OrderType,OrderNo,HoldCode,HoldCodeDesc,ReleasedDate
Record.endSeparator     'nl'
Please can anybody help in resolving this issue.

These are some of the very important content conversion parameters :
1)NameA.endSeparator= 'nl'
2)NameA.fieldNames=a,b,c...
3)NameA.fieldSeparator= ;
The above 3 parameters are important and almost mandatory.Your error clearly mentions missing out of        ' fieldSeparator ' .
NameA.fixedFieldLengths can also be included........
Some other important FCC parameters are :
4)NameA.addHeaderLine = 0
5)NameA.fixedFieldLengths = 10,10
Hope this information is effective and useful........
Award points if helpful
Regards : Deepika Kuppachari

JAR file not getting created

Hi All,
i have to develop a JAVA mapping JAR file using SAX parser.
So for this in Netweaver Developer Studio, i created a new EJB project. in the ejbModule, i created a package and a JAVA class in it. But the problem is the JAVA class is not showing in EJBCandidates - so i am unable to add it to ejb-jar.xml file.............
Can anybody suggest why the JAVA class file is not appearing in EJBCandidates..........
Thanks,
Rajeev Gupta

> Hi All,
>
> i have to develop a JAVA mapping JAR file using SAX
> parser.
> So for this in Netweaver Developer Studio, i created
> a new EJB project. >
Rajeeev
For a JAVA MAPPING in the NWDS , you need not ceate an EJB Project.
Just use NEW--> JAVA Project and then define a class that implements Stream Transfomratiom Interface in thsi project.
DO you coding in the execute mthod , and then finally , create a JAR file for this class / Project and then import it in your mapping uinder Imported Archives
Regards,
Bhavesh

Stange Files getting Created

I have recently noticed that I am getting strange files that I am not sure were they are coming from. The files when opened using VI show the text of MUTX and that is all they say. They are names starting with 0x, followed by a rather long string of Hexidecimal numbers.Example (0x6c6d48142) The files are getting placed directly in my main hard. The files are 44bytes in size but many many of them are getting created daily. I have found little to no articles explaing what may be related to MUTX,except it may be related to some type of "leak", I do not understand what that means. Has anyone seen this or this type of thing before? Thank you for your help

AnkitV wrote:
Hi
I am facing the below peculiar problem.
Our prod database D1 is installed on host H1 and PL/SQL jobs run on server S1 accessing D1 and create files on S1 only.
Recently I got same jobs scheduled to run on S2 accessing D2 database (test) installed on H2 serve,r but files are getting created on H2 instead of S2.
Directory object is EXTERNAL_TABLE_DIR on both S1 and S2.
Actually files should be created on S2 only as jobs are being run there only.
Can you please tell why are the files getting created on H2 given that jobs are run from S2 and what can be done to rectify this ?
Thanks a lotHi,
The job will be created the file only on the server where the database is installed not in any other server.

Screenshot cmd-shift-4 not working after startup

Guys, please help me. I have a 7 months old Imac running on OS X 10.9.4 with a bluetooth/wireless keyboard.
Recently my keyboard shortcut for screenshot (cmd-shift-4) stopped working. The funny thing is when I restart, the screenshot shortcut works for a minute or two and suddenly stops working again. I'm guessing is it one of the daemons/startup/login items?
I already tried:
-putting fresh batteries to the keyboard
-reinstalling Mavericks
-using another account name -
-checked the system preferences (under the keyboard shortcuts)
None of these worked. I use this function a lot in my work and it's driving me nuts for such a simple feature please help.
tion ~/Desktop/

If you boot into Safe Mode, does Command-Shift-4 continue to work
<http://support.apple.com/kb/ht1564>
If you use Command-Control-Shift-4 to capture the screen shot into the copy/paste buffer and then use Applications -> Preview -> File -> New from Clipboard, does that work? I'm mostly checking if screen shot functionality works at all, or if it is just the creation of a file on the desktop, or if maybe some other function has taken over Command-Shift-4 hotkey.
If you look in Applications -> Utilities -> Console -> All Messages, do you get any message that might be related to screen capture at the exact moment you are trying to do a Command-Shift-4?

Html5 but when press Shift+Enter in code view, get created a br / tag

WHEN I CREATE a new web page what choose if i want:
HTML 5 page
when press Shift+Enter in code view, get created a tag and NOT tag...? now if choose html5 created tag...

Are you manually selecting an HTML 5 document then?
If I have understood your question correctly, the link I posted should give you a workable answer. It basically changes the default to whether it's an HTML doctype or XHTML doctype. http://www.alistapart.com/articles/dreamweaver/
Closing non–closing elements
XHTML requires you to close non–closing (“empty”) elements including form tags, image tags, horizontal rule tags and break tags. Closing these pesky elements can be one of the most time–consuming tasks in transitioning to XHTML. But you can modify Dreamweaver to do the work for you:
CLOSING THE LINEBREAK.HTM
Let’s start with the simple line break; we’ll change to .
First, find the file called LineBreak.htm in Configuration\Objects\Characters.
Create a backup of LineBreak.htm.
Open LineBreak.htm.
Edit line 17 so that becomes .
Save and close the file.
Open a new HTML document in Dreamweaver and insert a line break.
View Source to be sure it worked.

Cmd+shift+4 screenshot files do get created on Leopard??

Similar Messages

Maybe you are looking for