CMS Config on DEV XI

We have landscape of four XI with SLD for each instance. And we are in the process of Migrating Sand, Dev and Q into one SLD. On Dev XI, we have portal instance running and CMS already configured to work for Portal Transports. For XI, we are yet to config.
My Question is: Can we config the CMS on same DEV XI to work through the transport, is there any conflicts between Portal CMS and XI CMS with respect to the transports.
We are trying to meet the timelines and budget, so we may not expect the Hardware for Seperate CMS Installation to take a place and trying to see if there are any work arounds.
Any help is appreciated

Hi Hari,
Please check these..
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b8d8f7b2-0701-0010-b09a-cda4cca2c98e
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f85ff411-0d01-0010-0096-ba14e5db6306
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/163a7cbf-0501-0010-8eb1-b25ad84a56ed
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/43f5d790-0201-0010-2984-ff72d822b109
Hope these help!
cheers,
Prashanth
P.S Please mark helpful answers

Similar Messages

How to tranport XI config from DEV to QAS or PRD

Dear Sir,
We would like to know How to tranport XI config from DEV to QAS or PRD
Thank you and best regards,
Vimol

Hi,
Check some links on transporting Objects.
Transporting IR,ID Objects using File System
http://help.sap.com/saphelp_nw2004s/helpdata/en/93/a3a74046033913e10000000a155106/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/a8/5e56006c17e748a68bb3843ed5aab8/frameset.htm
How to handle SLD for Tranporting Dev to Quality ser
https://service.sap.com/~sapdownload/011000358700001684302005E/HowToSLDandXI.pdf
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/0fa2c490-0201-0010-61b4-df12869c4753
Transporting XI from DEV to QA
Transporting XI from DEV to QA
using CMS system. in XI
1. /people/sap.india5/blog/2005/11/03/xi-software-logistics-1-sld-preparation
2. /people/sap.india5/blog/2005/11/09/xi-software-logistics-ii-overview
3. /people/sap.india5/blog/2005/11/28/xi-software-logistics-solution-iii-cms
4. /people/sravya.talanki2/blog/2005/11/02/overview-of-transition-from-dev-to-qa-in-xi --> Overview of Transition from Dev to QA in XI
5. /people/sravya.talanki2/blog/2005/12/20/inconsistencies-while-transporting-rfc-objects-from-dev-to-qa-150-sp12
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/9e76e511-0d01-0010-5c9d-9f768d644808
http://help.sap.com/saphelp_nw2004s/helpdata/en/93/a3a74046033913e10000000a155106/content.htm --> Transporting XI Objects
http://help.sap.com/saphelp_nw04/helpdata/en/ef/a21e3e0987760be10000000a114084/content .htm --> Configuring Groups and Transport Targets
Look into this blog for how to export / improt IR and ID objects,
/people/sap.india5/blog/2005/11/09/xi-software-logistics-ii-overview
/people/sap.india5/blog/2005/11/03/xi-software-logistics-1-sld-preparation
Please go through these links which actualy show you how to configure CMS and also gives you all information regarding it.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/43f5d790-0201-0010-2984-ff72d822b109
http://help.sap.com/saphelp_nw04/helpdata/en/de/a4214174abef23e10000000a155106/content.htm
/people/daniel.wirbser/blog/2005/10/27/tcsfilecreateexception--error-while-assembly-of-software-components-in-nwdi
http://help.sap.com/saphelp_nw04/helpdata/en/f6/719a2172f74b67b150612a7cd3b7df/content.htm
http://www.sap-hefte.de/download/dateien/964/074_lesesprobe.pdf
Here are some blogs.
/people/sravya.talanki2/blog/2005/11/02/overview-of-transition-from-dev-to-qa-in-xi
/people/sap.india5/blog/2005/11/03/xi-software-logistics-1-sld-preparation
Re: Moving project from Dev to QA
Error while exporting/transporting the Business system from Dev to Quality
Transporting the scenario frm Dev Server to PRD Server
transporting data from Dev to quality using CMS
Regards,
Phani
Reward points if Helpful

How to Purchase group configer in dev system and how to traverse quality

Hi All
I need ur help regarding for how to configer the Purchaseing group in dev system and how to traverse to Quality and production.
Thanks
Happy

Hi,
You can create the Purchasing Groups using the following settings.
SPRO-MM-Purchasing-Create Purchasing Groups.
Create a new entry for Purchasing group & save it in a Transport request & transport it to QAS & PRD.
Note: We define the Purchasing Groups @ client level
Thanks & Regards,

Config of CMS

Hi ,
Can some one help me to get a doc on CMS config.
Thanks
Nikhil

hi nikhil,
check these links,
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/b8d8f7b2-0701-0010-b09a-cda4cca2c98e">CMS BASED TRANSPORT IN XI</a>
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/163a7cbf-0501-0010-8eb1-b25ad84a56ed">Using CMS</a>
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/43f5d790-0201-0010-2984-ff72d822b109">how to use CMS in XI 3.0</a>
Regards,
Bhavesh

How to track changes for the config done directly in quality client-Reg

Hi,
In our system the landscape is Dev,Quality,Production.
For some transactions we will do the config in dev and transport to other clients or maintain in each client manually.Eg QS41,CI41.
In my case ,I have did the config in CI41 and transported to other clients.But someone user get in to CI41 in Quality client and did some changes. Now how to track the user Id through which the changes has been performed in QA directly.
Regards
SB

hi
you can use SE09 for displaying the transport no where you can see all the request nos ,from there you can check
also use the same transaction Cl41 do some changes like description ,then press the save button ,system will prompt you the previous saved Request No and make a note of it .cancel the request generation ,then you can trace them in SE09
also check whether you can find any change documents is available
regards
thyagarajan

CMS Positioning in the system landscape

Hi mates,
Currently, we have an environment XI DEV(SLD&CMS), QA(SLD), PRD(SLD) and Soln Mgr.
CMS is on DEV box and uses the SLD on DEV. So far we've been on XI 3.0 SP17, everything has been working well.
We are in the process of upgrading to PI 7.0 SP12 and re-evaluating positioning of CMS. We have a minor concern that, we sometimes have to bounce our DEV XI which will make CMS unavailable.
Whats the best practice for CMS positioning when we have SLD on each XI environment? Placing it on Soln Mgr or QA XI? Our primary use of CMS is for XI transports. We are not really sure of the robustness & advanatages of CTS + and think its early to go for it.
Are there any documents talking abt positioning the CMS like we have for positioning SLD?
I appreciate your inputs.
thx
praveen

Hi Praveen,
The best pracitse is to have two SLDs one one DEV serving DEV and Q
Other one on Production.
Two SLDs should be synched when ever there is a change, SLD provides this option by manual download and import of deltas.. These changes are very rare, so can be part of basis activity.
Also the adavantage of placing SLD on Production because Production mostly is Highly Available and SLD inherits thatr. SLD is one of crucial components for Production XI runtime and is advisable to keep on High Available environment.
Also SLD is not a very big app to hinder the perfomance of production.
I did this in all my implementations and works perfect.
There OSS notes for further analysis if you want to try
Thanks
Sujan

BOXI3 : How to copy a CMS to a new server?

Hello everybody,
Currently we have some problems on our production environnement.
Due to the complexity of the problem, we want to copy the production cms on our development server.
This is how we proceeded:
1- copy of frsinput and frsoutput on our dev server
2- copy of the production referential database using cmsdbsetup
But when we start the dev server all the servers are stopped and we have the following erro message "unable to locate the SIA on the server".
Can somebody give us some guidance to solve the problem?
Regards,

Hi,
Thank you for your quick replies.
I forgot important information.
Our confiuration is:
- OS: Sun Solaris 10
- BOXI3.0 with LAFIX16 and LAFIX33
- We have a production and a DEV environments that have already been installed
We want to copy the production cms on the DEV cms. What we did is :
1- copy the frs from prodution server to DEV server
2- copy the referential and audit database from production to DEV
3- use cmsdbsetup.sh to configure to import the copy of the production referential database on the DEV
4- restart all servers
Problem: All the servers don't see rhe SIA; so they can not start.
Did we forgot a step in the process?
Regards,

Custom kernel config and fsck error

Why does arch kernel config pass while custom kernel config fail the fsck during boot? Udev obviously populates /dev/sda* with the archlinux kernel config while the custom kernel config populates /dev/hda*. Is there a reason for this behavior related to the config file or is it a initscript based on /etc/fstab related issue? I have the two different kernel configuration files for the i686 machines, just in case someone can figure this out.
http://aur.archlinux.org/packages/longe … ig-longene
http://aur.archlinux.org/packages/longe … -archlinux

Check to make sure that it is not because of the system time being changed. It will complain about this if it has changed and fail the first filesystem check.
Last edited by Wintervenom (2009-09-08 15:56:26)

CMS Behaviour in XI - Clarifications needed

Hi All,
We have CMS configured in our landscape (indvidual SLDs for DEV, QA and PRD with CMS sitting on DEV SLD). Have been using CMS between DEV and QA quite from some time and was using file transports between QA and PRD. When we tried for the first time CMS between QA and PRD, instead of copying the only exported objects in the transport from DEV to QA, it has transported all the objects of that SWCV from QA to PRD, which made our lives worse.
Is this the normal way CMS behaves between the CONSOL and PRD systems? can't we transport delta objects from DEV to all the way till PRD using CMS (belonging to single name space)?
Or is it that, for the first time CMS behaves this way and setsup itself for further transports?
If that is not the case, do we have to design each interface in a separate SWCV, so that, each time, the entire SWCV gets transported from QA to PRD, though part of the changed objects have been transported from DEV?
Thanks in advance.

Since you are saying that, this is a work around, Can I assume that, CMS moves all the objects of a SWCV to PRD system from the CONSOL system (after assembly and approva steps) when ever I have exported any thing from DEV to CONSOL system using CMS? Is this the expected behaviour with CMS wrt XI?
Now -
If I have updated a datatype and interface of a single name space of a SWCV in DEV sys repository, and would want to transport it to PRD. For this the steps should be -
1. Select the objects in DEV at namespace level and export them to QA using CMS.
2. Before moving any other transports from DEV to QA, assmble these changes in CMS and move them to Approve status.
3. If the testing does not go well, go to step 1.
4. When testing goes well, approve the assembly that has been assemble previously and move it to PRD.
Should the above steps be the best way to go about with CMS?
Naveen please comment and confirm..
VJ

BOBJ DEV and BOBJ Q.A environments are syncing :(

HI experts,
I am facing an issue i have some folders and repors in bobj dev .but when i log in to bobj q.a i can see the same reports and folder .i did not export them and they are not pointing to same database .if i delete a folder in dev i can see its deleted in q.a ..help me how to resolve
i also created a user in dev and i was not able to login with that user in q.a so it shows database is not same but how come reports and folder are in sync ????????
please help me

Hi,
Did you migrate the whole CMS database from DEV to QA (using database copy or Copy Datasource method)? If yes, you need to delete and recreate your server and cluster entries as copying the datasource wouldn't change the metadata in the CMS database and your target system will be pointing to the source host only.

CMS Publishing

I am having a problem with publishing certs to a directory server. I am
using Netscape CMS 4.7 to
generate certs. and trying to publish them to iPlanet Directory Server 5.1.
From what I have read, you need to have an existing entry in the Directory
Server in order to pub. the cert. In my case, I want the CMS to create the
entry at the time of publishing.
One of the CA Cert. Mapper Plug-ins gives you an option to create an entry
at publish time, but the User Plug-ins do not allow this. (CMS created entry
for CA, but failed to post Cert??????)
Is there any simple way to do this, or do you need to create a new mapper
plug-in to fix this problem? If so, are there any shareware plug-ins that
are already written?
thanks in advance,
Nico

I was able to kludge this once by redirecting the user publisher to use the ca publisher function. I did not see any problems with this in affecting other functions. I asked this forum (before it was SunONE) about this and if they saw any problems with it but received no response.
You redirect by editing the CMS.config file in CMS 4.2. Seems the have changed this file somehow in 4.7 but as you asked about 4.2, I won't try to find it in 4.7. Also don't have a current install of 4.2 so I can't define which lines for certain get changed.
Hope this help.
BTW- I am not iPanet engineer so don't quote me on this but I have made it happen to test with CertCo OCSP responder requiring this. I think CertCo did right a new publisher function to work with CMS. This is probably the better way to do it.

How does XI system know the related CMS hostname?

Hi mates,
We ran into an issue using CMS. We are in the process of upgrade to PI 7.0.
We had the CMS on our DEV system and the CMS Tracks page has the following details.
CMS on Dev
DEV URL: DEV
QA URL: QA
PRD URL: PRD
In this process of upgrade, we copied our DEV system along with CMS on to EVAL. Before we upgrade DEV box, we tested the CMS that is copied on to EVAL. So we set the following on EVAL CMS
CMS on EVAL
DEV URL: EVAL
QA URL: DEV
PRD URL: <NONE>
We made sure that CMS service user & pwd are correct and exported a namespace from EVAL. Expectedly, it landed in DEV system. It worked fine.
Now, we had an emergency transport to be sent to PRD, so we have to do it using DEV CMS as PRD is specified there only. Before we did this, we removed the settings from EVAL CMS.(QA URL: DEV)
But, when we export the namespace from DEV, the transport goes in to status 'Waiting for Export' and doesnt appear in the consolidation tab of DEV CMS.
We tried to click on the button 'Update CMS', but it did not work. We are wondering if DEV system still assuming that it is linked to EVAL CMS. Do we explicitly specify the CMS hostname for an XI environment (in exchange profile or somewhere else)? Or, does the XI system determine it at runtime?
Please help me in understanding this flow logic between CMS & XI. I highly appreciate your inputs.
Hope I'm clear, let me know if you have questions.
The last thing we want to do is restore the DEV box using the back-up copy.
thx in adv
praveen

Rama Krishna,
> it doesn't make any meaning if we install XI and ask
> to USE CMS of different HOSTNAME.(like specifying CMS
> DEV as "QUALITY").
As I said earlier, not all the XI systems in the landscape have a "separate" CMS. They all are connected to one CMS...it can either be on the same box as XI DEV or XI QA or PRD or Soln. Mngr. Hope you understand this.
Now, my question is...for an XI box should I "explicitly" specify the host name of the CMS?
eg. in my case, I've the CMS on the same box as XI DEV. Now, do I need to explicitly specify the CMS hostname (i.e. hostname of XI DEV) in exchange profile of XI QA & XI PRD?
Coming to the DEV URL, QA URL & PRD URL, I'm talking about setting these values in the 'Tracks' tab. Please refer to pg 31 of <a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f85ff411-0d01-0010-0096-ba14e5db6306">How To Transport XI Content Using CMS</a>
> XI implictly takes local HostName for CMS.
if this is the case, that means XI DEV, XI QA & XI PRD will have separate CMS...sicne each one uses the CMS on the localbox as you say.
Somehow each XI box is told the CMS hostname.
Am I clear?
praveen

Where are /dev/sda 15 partitions?

I've got a PATA drive, and I installed arch64 half a month ago.
The problem is very easy to understand: my new ArchLinux installation can't detect /dev/sdaX where X>15.
So I can't load /dev/hda16,17,18,19.
How can I fix this?
Thanks

% ls /dev/sda1?
/dev/sda10 /dev/sda11 /dev/sda12 /dev/sda13 /dev/sda14 /dev/sda15
% dmesg | grep -i piix
% lsmod | grep -i piix
% grep ^MODULES /etc/mkinitcpio.conf
MODULES="piix pata_via ata_generic"
% mkinitcpio -M
Modules autodetected:
ata_generic
libata
pata_via
sata_via
ide-core
generic
via82cxxx
8139cp
8139too
mii
via-rhine
usbcore
ehci-hcd
uhci-hcd
ext2
jbd
ext3
reiserfs
xfs
% slocate -i piix
/lib/modules/2.6.21-ARCH/kernel/drivers/ata/pata_mpiix.ko
/lib/modules/2.6.21-ARCH/kernel/drivers/ata/pata_oldpiix.ko
/lib/modules/2.6.21-ARCH/kernel/drivers/ata/ata_piix.ko
/lib/modules/2.6.21-ARCH/kernel/drivers/i2c/busses/i2c-piix4.ko
/lib/modules/2.6.21-ARCH/kernel/drivers/ide/pci/piix.ko
/var/abs/local/kvm/src/kvm-17/qemu/hw/piix_pci.c
/var/abs/local/kvm/src/kvm-17/qemu/x86_64-softmmu/piix_pci.o
/usr/src/linux-2.6.21-ARCH/include/config/ata/piix.h
/usr/src/linux-2.6.21-ARCH/include/config/blk/dev/piix.h
/usr/src/linux-2.6.21-ARCH/include/config/i2c/piix4.h
/usr/src/linux-2.6.21-ARCH/include/config/pata/mpiix.h
/usr/src/linux-2.6.21-ARCH/include/config/pata/oldpiix.h
I've got a VIA controller.
Last edited by OCCASVS (2007-05-21 14:33:25)

Wireless: wpa_supplicant failed to open config file [SOLVED]

Hi,
I'm having trouble configuring my wireless network. At the moment I'm following the guide from the wiki, I can scan for networks but when i try to connect with wpa_supplicant I get following error:
Successfully initialized wpa_supplicant
Failed to open config file '/dev/fd/63', error: No such file or directory
Failed to read or parse configuration '/dev/fd/63'.
So far I've tried to google the problem, but haven't found a solution that works. I hope you can point me in the right direction.
Additional info:
'ip link' provide following output:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
2: wwp0s29u1u4i6: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
link/ether 02:80:37:ec:02:00 brd ff:ff:ff:ff:ff:ff
3: wlp3s0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state DOWN mode DEFAULT group default qlen 1000
link/ether 00:24:d7:af:98:dc brd ff:ff:ff:ff:ff:ff
4: enp0s25: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UP mode DEFAULT group default qlen 1000
link/ether f0:de:f1:53:66:eb brd ff:ff:ff:ff:ff:ff
And lspci:
lspci -k | grep Network
00:19.0 Ethernet controller: Intel Corporation 82579LM Gigabit Network Connection (rev 04)
03:00.0 Network controller: Intel Corporation Centrino Ultimate-N 6300 (rev 35)
And dmesg:
dmesg | grep firmware
[ 2.379351] iwlwifi 0000:03:00.0: Direct firmware load for iwlwifi-6000-6.ucode failed with error -2
[ 2.379368] iwlwifi 0000:03:00.0: Direct firmware load for iwlwifi-6000-5.ucode failed with error -2
[ 2.382114] iwlwifi 0000:03:00.0: loaded firmware version 9.221.4.1 build 25532 op_mode iwldvm
[ 8.560626] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
I guess it have something to do with the firmware, but I'm not sure, as when I googled the problem I stumbled upon a site stating that the wireless card should be supported by the kernel.
Last edited by cube2 (2015-01-07 14:00:34)

Yes it is on the same line as this:
sudo wpa_supplicant -D nl80211,wext -i wlp3s0 -c <(wpa_passphrase "SSID" "key")
systemtcl list-units
systemctl list-units
UNIT LOAD ACTIVE SUB DESCRIPTION
proc-sys-fs-binfmt_misc.automount loaded active waiting Arbitrary Executable File Formats File System Automount Point
sys-devices-pci0000:00-0000:00:01.0-0000:01:00.0-backlight-acpi_video1.device loaded active plugged /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0/backlight/acpi_video1
sys-devices-pci0000:00-0000:00:01.0-0000:01:00.0-drm-card0-card0\x2dLVDS\x2d1-nv_backlight.device loaded active plugged /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0/drm/card0/card0-LVDS-1/nv_backlight
sys-devices-pci0000:00-0000:00:02.0-backlight-acpi_video0.device loaded active plugged /sys/devices/pci0000:00/0000:00:02.0/backlight/acpi_video0
sys-devices-pci0000:00-0000:00:02.0-drm-card1-card1\x2dLVDS\x2d2-intel_backlight.device loaded active plugged /sys/devices/pci0000:00/0000:00:02.0/drm/card1/card1-LVDS-2/intel_backlight
sys-devices-pci0000:00-0000:00:16.3-tty-ttyS0.device loaded active plugged 6 Series/C200 Series Chipset Family KT Controller
sys-devices-pci0000:00-0000:00:19.0-net-enp0s25.device loaded active plugged 82579LM Gigabit Network Connection
sys-devices-pci0000:00-0000:00:1a.0-usb3-3\x2d1-3\x2d1.4-3\x2d1.4:1.0-bluetooth-hci0-rfkill2.device loaded active plugged /sys/devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.4/3-1.4:1.0/bluetooth/hci0/rfkill2
sys-devices-pci0000:00-0000:00:1a.0-usb3-3\x2d1-3\x2d1.4-3\x2d1.4:1.0-bluetooth-hci0.device loaded active plugged /sys/devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.4/3-1.4:1.0/bluetooth/hci0
sys-devices-pci0000:00-0000:00:1b.0-sound-card0.device loaded active plugged 6 Series/C200 Series Chipset Family High Definition Audio Controller
sys-devices-pci0000:00-0000:00:1c.1-0000:03:00.0-ieee80211-phy0-rfkill3.device loaded active plugged /sys/devices/pci0000:00/0000:00:1c.1/0000:03:00.0/ieee80211/phy0/rfkill3
sys-devices-pci0000:00-0000:00:1c.1-0000:03:00.0-net-wlp3s0.device loaded active plugged Centrino Ultimate-N 6300 (3x3 AGN)
sys-devices-pci0000:00-0000:00:1d.0-usb4-4\x2d1-4\x2d1.4-4\x2d1.4:1.1-tty-ttyACM0.device loaded active plugged F5521gw
sys-devices-pci0000:00-0000:00:1d.0-usb4-4\x2d1-4\x2d1.4-4\x2d1.4:1.3-tty-ttyACM1.device loaded active plugged F5521gw
sys-devices-pci0000:00-0000:00:1d.0-usb4-4\x2d1-4\x2d1.4-4\x2d1.4:1.6-net-wwp0s29u1u4i6.device loaded active plugged F5521gw
sys-devices-pci0000:00-0000:00:1d.0-usb4-4\x2d1-4\x2d1.4-4\x2d1.4:1.9-tty-ttyACM2.device loaded active plugged F5521gw
sys-devices-pci0000:00-0000:00:1f.2-ata1-host0-target0:0:0-0:0:0:0-block-sda-sda1.device loaded active plugged INTEL_SSDSA2M160G2LE 1
sys-devices-pci0000:00-0000:00:1f.2-ata1-host0-target0:0:0-0:0:0:0-block-sda-sda2.device loaded active plugged INTEL_SSDSA2M160G2LE 2
sys-devices-pci0000:00-0000:00:1f.2-ata1-host0-target0:0:0-0:0:0:0-block-sda.device loaded active plugged INTEL_SSDSA2M160G2LE
sys-devices-pci0000:00-0000:00:1f.2-ata2-host1-target1:0:0-1:0:0:0-block-sr0.device loaded active plugged MATSHITADVD-RAM_UJ8A2
sys-devices-platform-serial8250-tty-ttyS1.device loaded active plugged /sys/devices/platform/serial8250/tty/ttyS1
sys-devices-platform-serial8250-tty-ttyS2.device loaded active plugged /sys/devices/platform/serial8250/tty/ttyS2
sys-devices-platform-serial8250-tty-ttyS3.device loaded active plugged /sys/devices/platform/serial8250/tty/ttyS3
sys-devices-platform-thinkpad_acpi-rfkill-rfkill0.device loaded active plugged /sys/devices/platform/thinkpad_acpi/rfkill/rfkill0
sys-devices-platform-thinkpad_acpi-rfkill-rfkill1.device loaded active plugged /sys/devices/platform/thinkpad_acpi/rfkill/rfkill1
sys-devices-platform-thinkpad_acpi-sound-card29.device loaded active plugged /sys/devices/platform/thinkpad_acpi/sound/card29
sys-module-configfs.device loaded active plugged /sys/module/configfs
sys-subsystem-bluetooth-devices-hci0.device loaded active plugged /sys/subsystem/bluetooth/devices/hci0
sys-subsystem-net-devices-enp0s25.device loaded active plugged 82579LM Gigabit Network Connection
sys-subsystem-net-devices-wlp3s0.device loaded active plugged Centrino Ultimate-N 6300 (3x3 AGN)
sys-subsystem-net-devices-wwp0s29u1u4i6.device loaded active plugged F5521gw
-.mount loaded active mounted /
dev-hugepages.mount loaded active mounted Huge Pages File System
dev-mqueue.mount loaded active mounted POSIX Message Queue File System
home.mount loaded active mounted /home
run-user-1000.mount loaded active mounted /run/user/1000
sys-kernel-config.mount loaded active mounted Configuration File System
sys-kernel-debug.mount loaded active mounted Debug File System
tmp.mount loaded active mounted Temporary Directory
systemd-ask-password-console.path loaded active waiting Dispatch Password Requests to Console Directory Watch
systemd-ask-password-wall.path loaded active waiting Forward Password Requests to Wall Directory Watch
session-c1.scope loaded active running Session c1 of user jakob
dbus.service loaded active running D-Bus System Message Bus
[email protected] loaded active running dhcpcd on enp0s25
[email protected] loaded active running Getty on tty1
kmod-static-nodes.service loaded active exited Create list of required static device nodes for the current kernel
systemd-backlight@backlight:acpi_video0.service loaded active exited Load/Save Screen Backlight Brightness of backlight:acpi_video0
systemd-backlight@backlight:acpi_video1.service loaded active exited Load/Save Screen Backlight Brightness of backlight:acpi_video1
systemd-backlight@backlight:intel_backlight.service loaded active exited Load/Save Screen Backlight Brightness of backlight:intel_backlight
systemd-backlight@backlight:nv_backlight.service loaded active exited Load/Save Screen Backlight Brightness of backlight:nv_backlight
systemd-fsck@dev-disk-by\x2duuid-69c2b129\x2dd95a\x2d48f7\x2d84de\x2d058ba5f97b42.service loaded active exited File System Check on /dev/disk/by-uuid/69c2b129-d95a-48f7-84de-058ba5f97b42
systemd-journal-flush.service loaded active exited Trigger Flushing of Journal to Persistent Storage
systemd-journald.service loaded active running Journal Service
systemd-logind.service loaded active running Login Service
systemd-random-seed.service loaded active exited Load/Save Random Seed
systemd-remount-fs.service loaded active exited Remount Root and Kernel File Systems
[email protected] loaded active exited Load/Save RF Kill Switch Status of rfkill0
[email protected] loaded active exited Load/Save RF Kill Switch Status of rfkill1
[email protected] loaded active exited Load/Save RF Kill Switch Status of rfkill2
[email protected] loaded active exited Load/Save RF Kill Switch Status of rfkill3
systemd-sysctl.service loaded active exited Apply Kernel Variables
systemd-tmpfiles-setup-dev.service loaded active exited Create Static Device Nodes in /dev
systemd-tmpfiles-setup.service loaded active exited Create Volatile Files and Directories
systemd-udev-trigger.service loaded active exited udev Coldplug all Devices
systemd-udevd.service loaded active running udev Kernel Device Manager
pstree
systemd─┬─chromium─┬─chrome-sandbox───chromium─┬─chrome-sandbox───nacl_helper
│ │ └─chromium─┬─chromium─┬─2*[{Blink GC Sweepe}]
│ │ │ ├─2*[{Blink Heap Mark}]
│ │ │ ├─{Chrome_ChildIOT}
│ │ │ ├─{Compositor}
│ │ │ ├─{HTMLParserThrea}
│ │ │ ├─{OptimizingCompi}
│ │ │ ├─{WorkerPool/662}
│ │ │ └─{WorkerPool/663}
│ │ ├─chromium─┬─2*[{Blink GC Sweepe}]
│ │ │ ├─2*[{Blink Heap Mark}]
│ │ │ ├─{Chrome_ChildIOT}
│ │ │ ├─{Compositor}
│ │ │ ├─{HTMLParserThrea}
│ │ │ └─{OptimizingCompi}
│ │ ├─12*[chromium─┬─2*[{Blink GC Sweepe}]]
│ │ │ ├─2*[{Blink Heap Mark}]]
│ │ │ ├─{Chrome_ChildIOT}]
│ │ │ ├─{CompositorRaste}]
│ │ │ ├─{Compositor}]
│ │ │ ├─{HTMLParserThrea}]
│ │ │ └─{OptimizingCompi}]
│ │ ├─chromium─┬─2*[{Blink GC Sweepe}]
│ │ │ ├─2*[{Blink Heap Mark}]
│ │ │ ├─{Chrome_ChildIOT}
│ │ │ ├─{CompositorRaste}
│ │ │ ├─{Compositor}
│ │ │ ├─{HTMLParserThrea}
│ │ │ ├─{OptimizingCompi}
│ │ │ ├─{WorkerPool/155}
│ │ │ └─{WorkerPool/156}
│ │ ├─chromium─┬─2*[{Blink GC Sweepe}]
│ │ │ ├─2*[{Blink Heap Mark}]
│ │ │ ├─{Chrome_ChildIOT}
│ │ │ ├─{CompositorRaste}
│ │ │ ├─{Compositor}
│ │ │ ├─{HTMLParserThrea}
│ │ │ ├─{OptimizingCompi}
│ │ │ ├─{WorkerPool/666}
│ │ │ └─{WorkerPool/667}
│ │ └─chromium─┬─{AudioOutputDevi}
│ │ ├─2*[{Blink GC Sweepe}]
│ │ ├─2*[{Blink Heap Mark}]
│ │ ├─{Chrome_ChildIOT}
│ │ ├─{CompositorRaste}
│ │ ├─{Compositor}
│ │ ├─{FFmpegDemuxer}
│ │ ├─{HTMLParserThrea}
│ │ ├─{Media}
│ │ ├─{OptimizingCompi}
│ │ ├─{WorkerPool/688}
│ │ └─{WorkerPool/693}
│ ├─chromium─┬─chromium
│ │ ├─{Chrome_ChildIOT}
│ │ └─{Watchdog}
│ ├─{AudioThread}
│ ├─{Blink GC Sweepe}
│ ├─2*[{Blink Heap Mark}]
│ ├─3*[{BrowserBlocking}]
│ ├─{BrowserWatchdog}
│ ├─3*[{CachePoolWorker}]
│ ├─{Chrome_CacheThr}
│ ├─{Chrome_DBThread}
│ ├─{Chrome_FileThre}
│ ├─{Chrome_FileUser}
│ ├─{Chrome_HistoryT}
│ ├─{Chrome_IOThread}
│ ├─{Chrome_ProcessL}
│ ├─{Chrome_SafeBrow}
│ ├─{Chrome_SyncThre}
│ ├─{CrShutdownDetec}
│ ├─{IndexedDB}
│ ├─{LevelDBEnv.IDB}
│ ├─{LevelDBEnv}
│ ├─{NSS SSL ThreadW}
│ ├─{NetworkChangeNo}
│ ├─{OptimizingCompi}
│ ├─2*[{Proxy resolver}]
│ ├─{WorkerPool/1890}
│ ├─{WorkerPool/1936}
│ ├─{chromium}
│ ├─{extension_crash}
│ ├─{gpu-process_cra}
│ ├─{handle-watcher-}
│ ├─{inotify_reader}
│ ├─{renderer_crash_}
│ └─{sandbox_ipc_thr}
├─2*[dbus-daemon]
├─dbus-launch
├─dhcpcd
├─login───startx───xinit─┬─Xorg.bin─┬─xf86-video-inte
│ │ └─{Xorg.bin}
│ └─awesome───{gmain}
├─systemd───(sd-pam)
├─systemd-journal
├─systemd-logind
├─systemd-udevd
├─xterm───bash───pstree
└─xterm───bash

CMS - milter-spamc

Hi there,
we have a problem with the constallation CMS - milter/spamc
(Solaris8, CMS V. 4.7 SP1
Error message: RequestInQListener: send failed: sun.net.smtp.SmtpProtocolException: 553 5.1.0 [email protected].. address does not conform to RFC 2821 syntax)
We tried everything (hope so) in the CMS-config, but we didn't find out how to convert the address into the RFC syntax ([email protected] should be <[email protected]> )
Thanks for your help!

teekay wrote:
Looking at your postconf -n output, it looks like postfix isn't configured to use dovecot for SASL auth. Those two are missing:
smtpd_sasl_path = private/auth
smtpd_sasl_type = dovecot
See http://wiki2.dovecot.org/HowTo/PostfixAndDovecotSASL & http://www.postfix.org/SASL_README.html
From the certificate file name it also looks like you have the server running as mail.pedroliveira.com.
So it should be
myhostname = mail.pedroliveira.com
mydomain = pedroliveira.com
teekay, thank you for your answer, just in the bullseye, those configs, were missing as soon as I added them, I got my email setup correct!
Thank you once again!

CMS Config on DEV XI

Similar Messages

Maybe you are looking for