CO-PA Report: Incorrect Drill-Down to Line Item Report result (KE32 / KE34)

Hi There
We have created a CO-PA report and assigned the ability to call up the CO-PA Line Item report (KE24).
When we drill-down from a cell within the report for an actual amount for a specific period, the line item report displays the line-items from the prior period?
Any assistance would be greatly appreciated.
Thanks
peter

hi
add another columns and populate the formula as required.

Similar Messages

Standard report for FI Special Ledger Line Item report

is there any standard report for FI Special Ledger Line Item report

Hi
GD23 for Display of SPL Document
GD13 for Trail Balance of SPL
GCAC for Ledger Comparision
GVTR Balance Carry forward in SPl.
Assign Points if useful.

Drill-down to line items in drill-down report (FGI0)

Dear All,
I have a problem regarding executing drill down report in FGI0
When executing the drill down report FGI0 , I try to drill down to the line items from Goto-> line items but it's deemed & I can't run it.
I searched a lot and found only one link but didn't help
Customized drill-down report cannot go to line item level (FGI4 and FGI1)
Please help as it's very important issue

this is due to authorisation limit.
Ithink you do not have the access to view the 2009 GL balances.

Message GU506 when branching to line item report

We have carried out a shortened fiscal year change and now when we use a existing report painter report to branch to the line item report, then the system generates Message GU506: "Posting period & is not defined for fiscal year variant &"
I have found SAP note 62138 which refers to the issue but this is for SAP release 3* and we are on the latest release ERP606
Has anyone else had the same issue before?
thanks

Hi,
Please check below:
Table PRPS: Select OBJNR and pass to RPSCO and check if any value exists there. Note down the Value type, Year.
While in CJI3, please check if any dynamic Selection is active, remove all.
if mutliple selection shows any exclusions, remove all.
Posting Data: Remove the values. (Or put from 01.01.1900 to 31.12.9999)
Select the standard SAP Layout (Starting with 1SAP)
Value type=11 should be selected by default (Ensure it is checked)
Hope it helps!
Thank you and Regards,
Varshal Kachole

SAP Report Painter (Drill down)

Hi, SAP Experts,
I'm Henry. This is my first post on SCN.
I'm trying to solve a problem on drill down report of report painter.
I don't have much experiences. I really need your help.
The problem is that I developed one report painter (Balance Sheet) and one query (Line item report by account code).
I put the query on the report painter as drill down report. So, when I click a row on the report painter,
It should go to the query and see appropriate data on it.
However, somehow, company code is NOT copied to the query. Therefore, the result is the query shows all compnies data.
*My client has several compnay codes.
<Example>
[Selection field on the report painter (BS)]
   *Table: FAGLFLEXT
   1. Company code: "A1"
   2. Fiscal Year: "2014"
   3. Fiscal Month: "3"
[Selection field on the query (Line item report by account code)]
   *Logical DB: SDF
   1. Company code: blank (This is the problem. I need to know why the company code isn't copied)
   2. Account code: xxxxxxxxx (The account code is copied from the report painter. This is no problem.)
   3. Fiscal Year: "2014" (No problem)
   4. Fiscal Month: "3" (No problem)
   *After clicking a row on the report painter, I can see all companise data on the query. The query should give only one company which is selected.
If you have any solution or knowledge, could you please share it with me?
If you give me some advice, I would really appreciate it.
Best Regards,
Henry

Hiii Sai Krishna,
can u forward the same documentation to me..plsss
my mail id - [email protected]
thanks in advance
regards
ramki

REPORT PAINTER DRILL DOWN REPORT

Hi,
i need to develop report painter report with drill down for cost elments and month wise
out should be cost elements and all months
Please suggest how to use drill down
Thanks and Regards
RAVi

Along these same lines. I have a user that cannot drill down into a drill down report. Let me clarify. This report does have drill down capability as some people can drill down into it but others cannot. If a user has authorization to run a report via GRR3. When they click on an item to drill down they do not get an authorization error statement, all they get is a statment that says "list contains no data". Any ideas why some can drill down and some can't? Thanks
Mark

How to use drill down option in Crystal Report

Dear all,
I want to know how to use drill down option in Crystal report 2008. In below i have explained my screnario
For example
My scenario is. In crystal report I have Purchase order like PO101,PO102. Each purchase order have 5 line items. If i drill down each purchase order it should display line item in crystal report.
Regards,
Baskaran.

hi,
Create a Group on 'Purchase order'.
Group Expert -> Select the Purchase Order and Click the arrow button such that it appears right side. Click ok.
GH1 is inserted.
Your detail section should include 'Line items' fields.
Right Click 'Detail' section on left hand side, Click 'Hide (Drill down Ok)'.
Now you will see only 'Purchase order's in Group Headers.
Now when you click on a particular order, you will see respective line items.
Regards,
Vamsee

CRVS2010 Beta - Drill down functionality for Crystal Report in VS 2010

I found a limitation with Drill down functinality in crystal Report using VS 2010.
If report`s section or group has data in furthure section or same group, its work fine, but section/group does not have data, it allows to click on fields for drill down but genrate issue.
Updated subject line per this Beta post - Crystal Reports for Visual Studio 2010 Beta - read before posting
Edited by: Don Williams on Oct 16, 2010 12:59 PM

If you look up you'll see you are now in the "SAP Community Network Forums » Business Intelligence SDK Application Development (SAP BusinessObjects and SAP Crystal Solutions) » .NET - SAP Crystal Reports" forum.
But if want the link here it is:
Thank you
Don

[Forum FAQ] How to use parameter to control the Expand/Collapse drill-down options in SSRS report?

In SQL Server Reporting Services (SSRS), drill-down is an action we can apply to any report item to hide and show other report items. They all are ways that we can organize and display data to help our users understand our report better. In this article,
we are talking about how to use parameter to control the Expand/Collapse drill-down options in SSRS report.
Consider that the report has a dataset (dsSales) with following fields: SalesTerritoryGroup, SalesTerritoryCountry, CalendarYear, SalesAmount.
1. The report has the following group settings:
Parent Group: SalesTerritoryGroup
Child Group: SalesTerritoryCountry
  Child Group: CalendarYear
   Details: SalesAmount
2. Add three parameters in the report:
GroupExpand:
Available Values: “Specify values”
Label: Yes           Value: Yes
Label: No            Value: No
Default Values: “Specify values”
Value: Yes
CountryExpand:
Available Values: “Specify values”
Label: Yes           Value: =IIF(Parameters!GroupExpand.Value="No",Nothing,"Yes")
Label: No            Value: No
Default Values: “Specify values”
Value: =IIF(Parameters!GroupExpand.Value="No","No","Yes")
YearExpand:
Available Values: “Specify values”
Label: Yes
Value: =IIF(Parameters!GroupExpand.Value="No" or Parameters!CountryExpand.Value="No",Nothing,"Yes")
Label: No            Value: No
Default Values: “Specify values”
Value: =IIF(Parameters!GroupExpand.Value="No" or Parameters!CountryExpand.Value="No","No","Yes")
3. Right click SalesTerritoryCountry icon in the Row Groups dialog box, select Group Properties.
4. Click Visibility in the left pane. Select “Show or hide based on an expression” and type with following expression:
=IIF(Parameters!GroupExpand.Value="Yes", False, True)
Select “Display can be toggled by this report item” option, and select “SalesTerritoryGroup” in the drop down list.
5. Use the same method setting CalendarYear, (Details) drill-down with following expression:
=IIF(Parameters!CountryExpand.Value="Yes", False, True)
=IIF(Parameters!YearExpand.Value="Yes", False, True)
6. Click SalesTerritoryGroup text box in the tablix. Select InitialToggleState property in the Properties dialog box, and type following expression:
=IIF(Parameters!GroupExpand.Value="Yes", True, False)
7. Use the same method setting SalesTerritoryCountry, CalendarYear text box with following expression:
=IIF(Parameters!CountryExpand.Value="Yes", True, False)
=IIF(Parameters!YearExpand.Value="Yes", True, False)
After that, when we preview the report, we can use these three parameters to expand/collapse drill-down.
Note:
In our test, we may meet following issue. We can check the expression of InitialToggleState property to troubleshooting the issue.
Applies to
Reporting Services 2008
Reporting Services 2008 R2
Reporting Services 2012

In SQL Server Reporting Services (SSRS), drill-down is an action we can apply to any report item to hide and show other report items. They all are ways that we can organize and display data to help our users understand our report better. In this article,
we are talking about how to use parameter to control the Expand/Collapse drill-down options in SSRS report.
Consider that the report has a dataset (dsSales) with following fields: SalesTerritoryGroup, SalesTerritoryCountry, CalendarYear, SalesAmount.
1. The report has the following group settings:
Parent Group: SalesTerritoryGroup
Child Group: SalesTerritoryCountry
  Child Group: CalendarYear
   Details: SalesAmount
2. Add three parameters in the report:
GroupExpand:
Available Values: “Specify values”
Label: Yes           Value: Yes
Label: No            Value: No
Default Values: “Specify values”
Value: Yes
CountryExpand:
Available Values: “Specify values”
Label: Yes           Value: =IIF(Parameters!GroupExpand.Value="No",Nothing,"Yes")
Label: No            Value: No
Default Values: “Specify values”
Value: =IIF(Parameters!GroupExpand.Value="No","No","Yes")
YearExpand:
Available Values: “Specify values”
Label: Yes
Value: =IIF(Parameters!GroupExpand.Value="No" or Parameters!CountryExpand.Value="No",Nothing,"Yes")
Label: No            Value: No
Default Values: “Specify values”
Value: =IIF(Parameters!GroupExpand.Value="No" or Parameters!CountryExpand.Value="No","No","Yes")
3. Right click SalesTerritoryCountry icon in the Row Groups dialog box, select Group Properties.
4. Click Visibility in the left pane. Select “Show or hide based on an expression” and type with following expression:
=IIF(Parameters!GroupExpand.Value="Yes", False, True)
Select “Display can be toggled by this report item” option, and select “SalesTerritoryGroup” in the drop down list.
5. Use the same method setting CalendarYear, (Details) drill-down with following expression:
=IIF(Parameters!CountryExpand.Value="Yes", False, True)
=IIF(Parameters!YearExpand.Value="Yes", False, True)
6. Click SalesTerritoryGroup text box in the tablix. Select InitialToggleState property in the Properties dialog box, and type following expression:
=IIF(Parameters!GroupExpand.Value="Yes", True, False)
7. Use the same method setting SalesTerritoryCountry, CalendarYear text box with following expression:
=IIF(Parameters!CountryExpand.Value="Yes", True, False)
=IIF(Parameters!YearExpand.Value="Yes", True, False)
After that, when we preview the report, we can use these three parameters to expand/collapse drill-down.
Note:
In our test, we may meet following issue. We can check the expression of InitialToggleState property to troubleshooting the issue.
Applies to
Reporting Services 2008
Reporting Services 2008 R2
Reporting Services 2012

What is the difference in Interactive reports and Drill down reports?

What is the difference in Interactive reports and Drill down reports? Are they same?

Hi FRD ,
Both are same .
as far as i know there is no difference .
bye .

How to insert "%" into the report figure in report painter/ drill down

Please kindly advice how to insert "%" in the calculated amount in the report painter/ drill down report.
Thank you
Sirirak

Hi,
Create a text variable (for query name, option available in query properties).
Processing Type would be Replacement path, replace with variable.
Give the variable name created for the selection box characteristic in 'Replace with variable' option.
This would replace value of the text variable with the user input value.
Hope this helps!

Drill Downs in SSRS 2010 reports

Hello, I have a SSRS 2010 report that I’m trying to add some drill down features in List report.
My dataset has the following fields:
NAME
MANAGER
SEC_TYPE
BUYS
SALES
NEW_MONEY
AUM
My Rows groups are:
NAME – Parent Group
SEC_TYPE – Child Group
My columns are in this order NAME , SEC_TYPE, MANAGER , BUYS , SALES , NEW_MONEY,
and AUM. The NAME and SEC_TYPE groupings are visible and the individual fields are hidden.
I would like to add drill downs to report to do the following
Show consolidated view of NAME, BUYS, SALES, NEW_MONEY, and AUM only. Essentially, I want to remove all the detail that SEC_TYPE and MANAGER brings into the report.
2. When a user clicks a textbox it will expand into the view that adds the SEC_TYPE detail to the report.
3. Then when a user clicks another textbox it will expand to add the Manager detail to the report as well.
So I’m basically trying to give the user a very consolidated view and then have the ability to see more data upon request.
I think some of can visibility settings..
Any help would be greatly appreciated.
x

Drill downs are pretty straight forward. You create your tablix so it shows all of the desired data, grouped as you want. Add a Total row to show the summary data when the group details are collapsed. Then in each group properties starting from the Details
and working up, set Visibility to Hide and to be toggled by another control. That control should be the textbox in the cell for the parent group. Continue this to the point that the report initially renders in the desired consolidated view. Each cell that
controls the visibility of child groups will have a + next to it that can be clicked to expand the child groups data.
"You will find a fortune, though it will not be the one you seek." -
Blind Seer, O Brother Where Art Thou
Please Mark posts as answers or helpful so that others may find the fortune they seek.

Bex Free characteristic drill down in Web i report

Hi
I have a question, we are using bex query as source for our web i report.
for that if you have an idea on Bex query analyzer, we can drill down on a free char list in bex and each and every drill down bex query go back to cube and fetches and refreshes the data based on the selection.
In the same way can i get the same feature in Web i report, when i drill down my web i report should go back to the Bex query
and should refresh the data.
Any help in this regards is greatly appreciable
Thanks in Advance,
Swaraj.

Hi,
What you described is an OLAP 'slice and dice' type workflow - try the Analysis web application (in bi4.0 launch pad). WebI can do some drill down, but it is really best at consuming small chunks of rowsets (not 'flattened' OLAP datasets)
webi does go back to hit the database, but only when you click "refresh". so you can add a new object, and it sometimes says "#TOREFRESH" - then user refreshes to expand the scope of analysis.
this process was automated in XI3.1 (where the interface didn't prompt for the refresh) and customers typically complained of slow response times. i.e. they didn't realise the inclusion of a results object fired a new query.
Regards,
H

How to down load GR55 line items report

Hi,
Is it possible to down load the actual line item report (not the totals) from GR55 report in ECC 6.0? How can i down load it?
I know that we can double click on each line and get the actual line items. But is there any way i can down load all the line items at a time?
Thanks for your help.
Kind Regards
Umapathi G
Edited by: Umapathi Naidu G on Dec 14, 2010 11:50 AM

Hi
Then better to create an account group in PCA and execute the line item reports rather than GR55 reports
I guess the std way to get line items from Gr55 report is what you are doing now and certainly that cant be changed in my opinion... One should not be rigid for one extra click of a mouse
Regards
Ajay M

COPA line item report, Number format -output type - object list(ALV).

Hi,
I am preparing COPA line item report. I want to change number format (two decimal place). I did the changes in form level then I did the changes in drill down report as well and saved as save definition.
But changes are not reflecting in- output type - object list(ALV).
Please provide help in this.
Regards

HI
What t-code you are using to write this line item report ?

CO-PA Report: Incorrect Drill-Down to Line Item Report result (KE32 / KE34)

Similar Messages

Maybe you are looking for