CO11N work center mandatory and without default

Dear guru,
i need to make work center mandatory in CO11N and without any default
from production routing.
I donu2019t want to use SHD0.
Do you suggest any exit to obtain this ?
Thanks in advance

Hi,
I believe the user-exit which you should look at is:
CONFPP03 PP order conf.: Cust. specific check after op. selection
or
CONFPP05 PP order conf.: Customer specific enhancements when saving
Check with your abaper if the above can meet your need.
Regards,
Vivek

Similar Messages

Work Center Mandatory in PM Order

Hi Experts,
May i know how can i make Mandatory, both Work center (Mn.wk.ctr) Under Person Responsible sub screen and the work center ( WkCtr/Plnt ) under first Operation sub screen of the Header TAB in PM Order.
Regards,
Kavvya

Hi,
The Work Center (CAUFVD-VAPLZ) field under 'Person Responsible' should always be mandatory as it is hardcoded.
The Work Center (AFVGD-ARBPL) of operation can be set with transaction OIOPD. If the 'work center' field is not available in OIOPD, then see the correction from note [1282463|https://service.sap.com/sap/support/notes/1282463].
-Paul

Work center design and operation confirmation

Hi All,
In my scenario im grouping the similar m/c to a work center
say for ex. 4 lathes m/c into a single work center as LatheALL and also the indiv cap as 4
my customer wants the traceability in which m/c the job is done
So i had designed in such a way that
1 LatheALL -4 cap(this will be additional wc)
2. lathe1 - 1cap
3.lathe2 - 1cap
4.lathe3-1cap
5.lathe4-1cap
in the routing only latheALL will be given., this will help customer in planning
when going for operation confirmation i will give confirmation for that operation and will confirm as lathe1or lathe2 or etc.. this will help prodn dept for traceability in which m/c the work is done
this is method i have informed to client .,
pls advice is this approach is correct ?
also suggest by giving confirmation for another work center will the capacity for the original work center will be reduced
Regards
Anand Srinivasan

Hi Anand,
this is method i have informed to client .,
pls advice is this approach is correct ?
yes, during confirmation time to enter the orginal actual work center, this suitable for your client requirement, do the settings for OPK0 - change the confirmations parameters (0410 or 0420)
Regards,
Sankaran

Work Center Hierarchy and Capacity

Hello SAP friends,
Can someone please help me with the following scenario?
I have 3 Work Centers
MAQ00 - (Capacity 10:00 x 2)
MAQ01 - 8:00 -- 18:00 (Capacity 10:00)
MAQ02 - 8:00 -- 18:00 (Capacity 10:00)
I have a hierarchy
HICY01
MAQ00 - Root of hierarchy
|_ MAQ01
|_ MAQ02
Then, I have a routing
10 - PP01 - MAQ00 - 1H
20 - PP01 - MAQ00 - 2H
If I go to CM01 for Work Center MAQ00 I can see the capacity and requirement, where:
Capacity: 10:00 x 2
Requirement: 3:00
But if I go to transaction CM21 for Work Center MAQ00 the capacity and requirement is not correct. Can someone please help me with this?
Thanks in advance,
Adelmo Silva

Hi,
CM01 will give the cumulative requirement as 3 hrs but CM21(Gradhical View) shows the individual spread of oprn. 10 and 20 as 1H and 2 H resp.
Does the above help you?
-Thaila Shree

To find 'Maintenance Work Center' for Equipment (without Production order)

Hi,
I have a Report for - 'Equipment BOM' - IB03.
Problem: How to find the 'Maintenance work Center ' For Equipment ? (IE03--> Organization > Responsibility> Main. W.Cntr)
[ Note: For Client --> It's not necessary that each Equipment has Production Order, Few Equipments are taken only for Repair purpose, Equipment is there in table - EQUI,
So - Not possible to fetch from AUFK, HIKO or any other order tables. ]

I have a Report for - 'Equipment BOM' - IB03.
Problem: How to find the 'Maintenance work Center ' For Equipment ? (IE03--> Organization > Responsibility> Main. W.Cntr)
[ Note: For Client --> It's not necessary that each Equipment has Production Order, Few Equipments are taken only for Repair purpose, Equipment is there in table - EQUI,
So - Not possible to fetch from AUFK, HIKO or any other order tables. ]
EQUZ-GEWRK has the main work center. Pass the equipment number and valid-to date to get the main work center.
Cheers
Sujay

PP work center capacity and link in Equipment master

Dear All
My client has five equipments which he is clubing them into one work center with five capacities. In equipment master i have given for respective equipments i have given PP work center locations but when i create a maint order for one equip then in planning the capacity avalability is affecting the entire work center for ex if the total work on one equip is 12 hrs then only 8 hrs of capcity should be deducted for to day and 4 hrs for tommorow but in plannig all 12 hrs are getting deducted in todays capacity itself.
Pls give some inputs from your experiances
Thanks and Regards
Pankaj

Hi,
Even if we have more than One Equipments in the same work center, PP-PM integration will work.
This is the standard scenario in any Process Industry or in case of an Assembly line of a Automobile manufacturing industry.
So it should work. Please check the following points again,
1. Assignment of Work Center to Equipment Master
2. System Condition - '0' Not in Operation in Both header as well as against Individual Operations (in Work Order for that Equipment)
3. Work Order has been released.
4. Same Work Center is used in Routing and the same is Planned for a period.
If we have all the above points right, then while dispatching the Production Order system should show the Period of block and should shift/plan the PO accordingly.
Regards
Sam

Work Center Hierarchy and Routing

Hi,
I would like to know what exactly Work Center hierarchy mean?. Where is it used. In Routing, we maintain Sequence of operation along with workcenter where this operations are performed . Would like to know does work center hierarchy is linked to sequence maintained in Routing?. Thanks

Hi,
Any one can explain me the use of Workcenter Hierarchy?. In Routing, we maintain the sequence of operations. Does Routing and Workcenter Hierarchy has relation?. If Yes, what is the relation between these 2.
Thanks in advance

Buyer Work Center performance and persoanlizations

Hi All,
we are currently on R12.1.3 and we've few issues with the way the Buyer Work Center is working
1) The performance of BWC is very slow. Navigating from one field to another field takes at least 5seconds. For fields like project, task, org etc the form takes 10seconds also. Combining all this, creating a PO with 10 lines takes about 10-15mins for our users. Is this normal? Are there ways to improve the performance?
2) There are multiple screens to navgiate. First the users start off with header then to line summary and then to line details/schedules/distributions etc. Is there a simple way to make all information available in one single page so that the users do not have to spend time navigating from one screen to another screen? This will be really helpful for users creating POs with more than 10lines. I'm thinking of persoanlizing the PO line summary screen and make POET available there. Has anyone done any customizations to the PO line summary screen?
I'm sure you must have faced similar issues with your clients. Please let me know if you handled these issues.
Thanks,

hadimulam wrote:
2) There are multiple screens to navgiate. First the users start off with header then to line summary and then to line details/schedules/distributions etc. Is there a simple way to make all information available in one single page so that the users do not have to spend time navigating from one screen to another screen? This will be really helpful for users creating POs with more than 10lines. I'm thinking of persoanlizing the PO line summary screen and make POET available there. Has anyone done any customizations to the PO line summary screen? Same question was asked by my client, I recommended them to go directly to the "Distributions" tab and search for the PO. Actually most of the key fields from the header, lines, shipments and distributions are available at the distribution tab and you can add many more fields by clicking on the "Add Another" field. Moreover, you can save the final view for future reference so that you don't need to add the same fields again.
Yes, it is a workaround, as you will see repeated lines for multi shipment and distribution scenarios but single shipment - distribution scenario will be OK.
Thanks,
PS.

The sound on my laptop has stopped working entirely, with and without headphones. What should I do?

The sound on my computer has stopped working. I have searched through countles google entries to try and figure out the problem but I can't find anything remotely useful. I never spilled any liquid or anything on my computer. I was just searching through youtube and when I clicked a video there was no sound. Then I checked iTunes and tried to play some music, still no sound. I played around with the preferences and volume control, still no sound. If you have any advice please help. Going to the apple store is so expensive and I don't have the time or money.

Did you try resetting PRAM and SMC?
Is there any red light visible in the headphone port?

My iPhone 4 worked fine yesterday an today the sound won't come out of the speakers from music and videos but worked on earphones and without earphones all I can hear is when Someone's calling me

Idk what I did

I got it out!
Here is how.
None of the Apple-suggested ways worked. However, before totally giving up I started Roxio Popcorn and pressed the big eject button on it. It came out effortlessly!
So, I thought "Weird..."
I put the CD back in and reproduced my original problem. I got it out just as easily using Roxio Popcorn Eject feature.
So, I then thought "Maybe it is the disk?" There is nothing wrong with the disk as far as I can tell. It is perfectly round, has a smooth label-side surface. It is not even a label, it is a standard software install disk you buy in stores.
I inserted a different disk. The mini mounted it, I browsed it, and then ejected it by dragging it to trash. Worked fine.
I tried a few other disks.
The drive seems to work fine.
Maybe that CD is cursed, I dunno. I tried that disk in my PowerBook and it works fine there.
Who knows ?
I am still backing up my hard drive as I type this message in case I need to take it to the store.

SAP GUI not working with SAP* and DDIC default passwords

Hi SAP Guru's ,
at last I installed the SAP ECC6.0 on Windows 2003 (stand alone) with Oracle 10G database.
I installed the SAP GUI , when I am trying to loging from SAP GUI clients 000 and 001 with SAP* and DDIC user accounts I am naot able to login . please give me the how to configure this .
thanks in advance
Edited by: srinivas kaveti on Apr 4, 2008 9:16 PM

Hi Srinivas,
You should set "login/no_automatic_user_sapstar=0", in the SAP profile. With ECC 6.0, default sapstar user deactivated. You can take a look at OSS note #68048, for detailed information.
Best regards,
Orkun Gedik

CTI Work Center ID not defaulted

Hi,
we're running CRM 7.0 with Computer Telephony Integration via Cisco/Bucher&Suter. My question is related to the Work Center ID which has to be entered by the agents during log-on. The work center ID is usually defaulted on the next log on, however, sometimes the work center ID is blank for some agents during log on and they have to manually enter it. I'm trying to find out how the work center ID is linked to the user logging on. I cleared my browser settings, deleted cookies, etc., but couldn't reproduce the issue some of the agents have. My work center ID is still defaulted when I log on. Anybody had this issue before or can tell me where the link between user and work center ID is stored?
Thanks
Ulf

Hello Ulf
As far as I know, the default workcenter Id is retrived from the CMS each time ICI request for user capabilities during log in process so you should have a talk with your CMS provider to check why it's not sending the default worcenter id. Check the method IciSystem_getWorkcenterCapability_Request defined in the ICI specification,
I hope this helps
Regards
Julio Peralta

URGENT........ACTIVITY TYPE AND THEIR ASSIGNEMENT TO WORK CENTER!!!!!!!!!!!

Hi Friends,
I have A REAL URGENT REQUIREMENT as far as activity type and assignment to Work Center is concerned.
I work for a client who is a manufacturer of Paint equipment. I'm responsible for capturing the cost of an assembly activity of spray guns, which is the last step of routing. However, there are 4 processes/steps of routing which are outsourced to the subcontracting vendors. we recieve the facbricated, anodised guns which are assembled in our factory.
I need to get the cost of assembly, which I have created as an actvity type in KL01 and planned for the same using KP26. However the system is throwing up errors related to costing, and I'm not sure about the assignment areas in work center.
And above all I'm not sure of various fields in KP26 like capacity field and what do we assign.
can anybody help me with the series of steps for me to be able to pick up the cost. or if there is any sort of material in this regards, plz mail it to: __ email removed by moderator
regards
sandhya

Hi,
You need to do the following:
1) Create an Activity type for the Assembly activity.
2) Define a Work Centre in PP (T-Code CR01) which represents the location where the Assembly is carried out.
3) Define a Cost Centre corresponding to the above Work Centre.
4) Plan for the Activity quantity for the combination of the Cost Centre and Activity type (KP26)
5) Plan for the Overhead Costs which are incurred on this Cost Centre which need to be included in the Standard cost of the Assembly.(KP06)
6) Assign the Cost centre & Acivity type to the Work Centre in CR02.(This is possible only after you do 5 above)
7) Execute the Plan price calculation (T-code KSPI)
After you do all of the above, when you do the Costing Run, all the relevant costs will be picked.
Ofcourse all the relevant master data for PP like BOM, Routing with the relevant assignments of materials to operations, etc should be in place.
Regards,
Assign points if useful

Table Link for EQUNR (Eqpt Number) and GEWRK (Main Work Center)

Hello,
I need to fetch the main work center from equipment master. I need a direct table link between the equipment number and mainwork center. We are getting a link of equipment number (EQUNR) to work center (ARBPL) and a link of work center (ARBPL) to main work center (GEWRK). But the problem with this scenario is - main work center is not getting fetched from equipment master once work center is missing.
We want a direct link through some table between EQUNR and GEWRK.
Puneet

Hi Puneet,
Appreciate your problem !
Many a times in such a situation (which I presume exists where no direct link is available between fields); we have 2 clear cut approaches -
Approach 1:
Develop a SAP Query, Functional Area/Infoset, and User Group ( using T code :SQ03,SQ02,SQ01 respectively )
While developing Functional Area feed in these 2 tables (Table 1- equipment number (EQUNR) & work center (ARBPL) and Table 2 - work center (ARBPL) to main work center (GEWRK) with work center (ARBPL) as the Primary Key- bridge to join these 2 tables.
In SAP Query Development; you may take Plant as the Selection Field or any other field as per business requirement to make a search in the query.
Now when you execute this query, you will get a complete Download of (EQUNR),work center (ARBPL) and main work center (GEWRK) in one table.
For SAP Query, you may also approach your ABAP Team Member. This is a cleaner approach than the other one.
Approach 2:
Take SE16 download of the Table 1 and Table 2 and join them in Excel (using vlookup if required).This approach is however limited to the data volume that you have to process.
Please let me know, if you get stuck !
Thanks,
RAVI.

Org unit s and work center

Hi,
Can i know how workcenters and orgunits are related ,can 2rgunits and 1workcenter exit,can 1org unit and 2workcenter ?
regards
Hema

Hi Hema,
It depends on your relationships between the objects. The 003 relationship - 'Belongs to' usually is used to relate a position 'S' to a work center 'A'. You can create a relationship where an org unit 'O' could be related to a work center 'A' and if you do so, you can specify the time constraint of the relationships so that 'only one may exist' (time constraint 2) or 'more than one may exist' (time constraint 3) at a time. Up to you how you want to define these relationships.
Table T778V should be your first stop to create the relationships and the time constraints. And then create the Evaluation Paths T778A so that you can assign the objects and then view them.
Work Centers are usually defined as 'physical work location'. Persons in a organizational unit could work at one or more work locations or a work location could have people from several organizational units working there. How do you see the relationship?

CO11N work center mandatory and without default

Similar Messages

Maybe you are looking for