Co3 error activation date has passed

Hi all I'm having problems with vision everytime i reboot the box that was delivered yesterday i get the c03 error i tried calling call centre there usless keep saying i promise it will come on it takes time but my activation date has now pass im starting to wish i never left virgin now any ideas how i can watch tv

Hi,
1. A C03 error means your Vision account has not been set up correctly at BTs end.
2. A c02 error means the box tried to upgrade its software and failed. This 99% probably happened because of point 1.
Get the Mods on it. They are very helpful.
Rank - Mostly Harmless.

Similar Messages

Activation date has passed, broadband is not activ...

Hi,
My activation date was yesterday. It has now passed and, somewhat unsurprisingly, my broadband has not been activated. On the BT ordertracking page, regarding the broadband it informs me "your broadband order is in hand with a member of our team....". Regarding the phone line it says "We are currently investigating your line order with our supplier....".
Has anyone had this problem before? What causes this problem? How long should it normally take from now to get connected? It says to call customer services if it is past activation date and BT don't get in touch (which they haven't so far), but I'd prefer not to have to spend an hour of my evening on hold.
Thanks,
Chris

Hi malfunct,
Welcome to the community and thanks for posting!
I'm sorry for the delay getting service connected. Is everything up and running now? If not, click on my username and under the section "about me" you'll see the link to get in touch with us. We can help sort things out from here.
All the best,
Robbie
BTCare Community Mod
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry that we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

My activation date has passed but my order status ...

Phone line has been fitted a couple of days ago so should've been activated at any time up to midnight on the activation date. This has now passed but the order status is still in progress when I go to the track order page. The help page says that this means there's been a problem with my order.
Please help!!
Thanks
Solved!
Go to Solution.

Once the Forum Mods have read your post they will post an invite here once you reply to them they will take personal ownership of the problem until resolved
do not send them a Personal Message as this is the incorrect contact method and cannot be properly tracked also the mod contacted may not be on shift for sometime and this will delay your help
If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

My activation date has passed and still no broadba...

My activation date was last Friday (25th October) and on Saturday morning (when mobing into a new flat I had ordered this to) Broadband had still not activated. I was also told during ordering that I could get the router delivered on the Friday and it wouldnt be a problem that no one would be home as it is "designed to fit through the letter box". I got there on move day to find a red ticket so I had to then queue at the post office after having been told specifically I wouldn't.
I called BT and after speaking to 4 people I was told that I had to speak to a 5th person in "Accounts" as it was an account related thing that BT had a technical problem with.
This lady then tells me that there was nothing I could do to help and that the braodband would start Monday midnight without fail and that she is sorry 100 times over and that she would email me details on how I could connect to Bt-Fon networks in the mean time...
Its Tuesday morning and we still have no internet and the order online still shows "in progress" instead of complete. Also never recieved this promised email.
What should I do?!!!
After all of the promises BT have made and not kept I am supremely disapointed!

Hi thommegzy,
Welcome to the community and thanks for posting!
Sorry for the delay getting services set up in your new flat. I can help you get connected from here. Click on my username and under the section "about me" you'll see the link to get in touch with us.
Please include the link to this thread when you complete the form and whenever we've received your details we'll take it from there.
Thanks a million,
Robbie
BTCare Community Mod
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry that we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

Broadband activation date has passed and no broadb...

After my contract broadband with O2 was sold to Sky and sky jacked up the price. I decided to switch to BT broadband. The sign up was fairly straight forward and I was given an activation date January 20th, hub arrived same day and BT sports was turned on too. I plugged in hub on Tuesday morning and it went orange with a flashing red b. I left it till the evening just in case I was being impatient but still no blue light. I had a text message that same evening apologising for the delay and they will call me on Thursday 23rd and not to call as there was no need. That's in itself was frustrating, the lack of information and the disregard for customer care. There was no call on 23rd so I decided to call them and was told that there is an issue and that a specialist would be in touch and there was nothing they could do just wait for the call. Up to now I have had no further information and I'm just frustrated by the lack of information or renewed activation date it's making me regret changing providers. Can anyone enlighten me as to what's happening and where this fabled specialist is?

Hi Novvy26,
I would like to take a look at your account to see what is happening with your order for BT Broadband. Please send me in your details using the "Contact The Mods" link found in my profile.
Thanks
PaddyB
BTCare Community Mod
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry but we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)

Broadband activation date has passed, and nothing....

Hi all,
So yesterday we had our new BT services in a property that we've just moved to. The OpenReach guy was actually early and after about an hour had the line up and running. Our equipment hadn't arrived so we couldn't test broadband but the phone line seems to be working fine.
Then our equipment arrived and we set it up but the blue B didn't glow. We thought this was fair enough as they do say up to midnight. Then at about 4 I received an email and text saying that the service was all ready to go. So we tried again but still the b light didn't glow.
So we called BT and didn't get much sense out of the advisor. She was flip flopping between different lengths of time based on my reaction - 24 hours, midnight tomorrow, etc. She settled on saying it would be up by midnight tonight (yesterday).
Needless to say, it didn't miraculously start working at midnight. It's now the morning after, and it still isn't working. Oh and the 24 hour support line closes at 9pm and reopens at 8am...
Any advice?
Thanks.

Hi jacklenox,
Welcome to the forum and thanks for posting. I can look into this if you wish. Drop me an email with the details. You’ll find the “contact us” link in the about me section of my profile.
Cheers
David
BTCare Community Mod
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry but we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)

WebPart is raising the following error "Invalid data has been used to update the list item.The field you are trying to update may be read only"

I have created a farm solution and then i deploy it to SharePoint server, the code looks as follow, and i use it to update a page info values (as the current page values represents old info):-
[ToolboxItemAttribute(false)]
public partial class VisualWebPart1 : WebPart
// Uncomment the following SecurityPermission attribute only when doing Performance Profiling using
// the Instrumentation method, and then remove the SecurityPermission attribute when the code is ready
// for production. Because the SecurityPermission attribute bypasses the security check for callers of
// your constructor, it's not recommended for production purposes.
// [System.Security.Permissions.SecurityPermission(System.Security.Permissions.SecurityAction.Assert, UnmanagedCode = true)]
public VisualWebPart1()
protected override void OnInit(EventArgs e)
base.OnInit(e);
InitializeControl();
using (SPSite site = new SPSite(SPContext.Current.Site.Url))
using (SPWeb web = site.OpenWeb())
SPList list = web.Lists["Pages"];
web.AllowUnsafeUpdates = true;
foreach (SPListItem items in list.Items)
items["Author"] = "SharePoint";
items["Created"] = "01/08/2014 01:44 PM";
items.Update();
list.Update();
web.AllowUnsafeUpdates = false;
protected void Page_Load(object sender, EventArgs e)
but when i try adding this web part to a page i got the following error:-
Invalid data has been used to update the list item.The field you are trying to update may be read only
so can anyone advice?

i only changed lines bitween
web.AllowUnsafeUpdates = true;
and
web.AllowUnsafeUpdates = false;
and other parts of code remains without change
so it will updates all pages in current web
yaşamak bir eylemdir

Only show certain fields after a date has passed

How would I set a recordset to only show certain fields after
a date has
passed?
For example:
I have a list of classified adverts some which include an
image which the
client pays extra for. After a certain time period, say, 1
year,
would it be possible to use some kind of IF statement (or
something) to no
longer show the image?
Thanks
Gary

scrap that entire post man.
I'll rewrite it here in a few.
"crash" <[email protected]> wrote in message
news:[email protected]...
>
OK. I can't be as much help as I was hoping, since I
just did this in
> PHP and MySQL. But we can do a bit. My ASP is rusty
enough I'm just going
> to give you what I think you should do.
>
> You'll need to research how to format dates and most
importantly strip
> away the timestamp. In MySQL, you can format the date as
it comes out of
> the recordset. I'm not sure if you can do this in
access, but I would
> imagine that you can (indeed, it might be the same SQL).
>
> <%
> varToday = Date (should be able to format out timesteamp
here);
> varTerm = 365; 'This will be your constant term, defined
in days, it looks
> like from archived posts
>
> varExpiredDate = varToday = varTerm;
>
> Search your recordset via varTerm. ie
> WHERE datefield < <% varTerm %>
>
> You will need to search date formatting in Access to see
how to strip out
> the Timestamp from your date, but you should be able to
do this from your
> SQL statement, and return just the date, this will be
compared to your
> varTerm, which basically states that if your signup date
is beyond a year
> from today, your ad will need to be renewed.
>
> I"m not very happy with this, but it's all my brain is
coming up with
> right now. Gimme a few to review it and I might have
something more for
> you.
>
> HTH, sorry I couldn't give you code or urls for date
formatting.
>
> Additionally, you will eventually need to build
somethign that checks
> images and and dates and then sends an email to your
customer letting them
> know their term has expired.
>
> OR - You could also add a new field to your database
which automatically
> updates an "expire" time in your ad table which
automatically adds days to
> the time. If you do this, you don't have to worry about
stripping
> timestamps or anyting, and you can just do a simple
lookup for if Date >=
> DateExpireField then don't pull image.
>
>
>

C4180 error:the data area passed to a system call is too small

C4180 Photosmart printer. Loaded official HP driver from the web site for this all in one.
OS is windows 8.1 pro 32bit.
After any print command , in my case a test print the following windows error.
"The data area passed to a system call is too small".
Removed driver and reinstalled, same problem.
Anybody had the same problem, more to the point what is the cause.
Thanks.

Hi jongar47,
Welcome to the HP Support Forums! I see when you attempt using a print command with your HP Photosmart C4180 you get a "The data area passed to a system call is too small" error. You have Windows 8.1, you updated the drivers for the PS C4180, and tried uninstalling and reinstalling the driver with no success.
I would like you to run the HP Print and Scan Doctor- It was designed by HP to provide users with the troubleshooting and problem solving features needed to resolve many common problems experienced with HP print and scan products connected to Windows-based computers.
Does the PSDR find any problems with the software and drivers, any conflicts?
Please let me know the outcome, I will watch for your reply.
Thank you,
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Error activating data for an ODS

I had a bidding ODS which was working perfectly.
Since I haded 0CALDAY in the data fields (with everything setup around, update rule, transfert, etc), I have an error when activating the data..
I can see that the new data (not yet activated) is correct, with the 0calday field correctly filled in, but impossible to activate.. the problem seems coming from the FORM ACTIVATE_SIDS. and I can't see the field 0calday in this routine.
more info:
here I can see that 0calday is missing:
      FORM ACTIVATE_SIDS                                            *
FORM activate_sids                                          "#EC CALLED
     USING     i_t_request TYPE rsdro_t_request
               i_err_count TYPE i
               i_serialize type rs_bool
               i_checkfl    type rs_bool
     CHANGING c_t_msg      TYPE rsdro_t_msg
               e_subrc      TYPE sy-subrc.
SP7
i_serialize einbauen...
DATA:
*INSERTAS 26052003 P14 <625425>
l_dummy(72),
*ENDINSERTAS 26052003
l_s_upddata TYPE l_s_sidupddata,
l_t_where    TYPE rsdro_t_abapsource,
l_new_sids_possible TYPE rs_bool,
l_count      TYPE i VALUE 0,
l_err_found TYPE i VALUE 0,
l_err_count TYPE i,
l_single_convert TYPE rs_bool,
l_subrc      TYPE sy-subrc,
l_cursor     TYPE cursor,
SP7
l_t_msg      TYPE rsdro_t_msg,
l_s_msg      type rsdro_s_msg.
remove following line once patch 1 is installed
raise x_message.
IF i_err_count <= 1.
    l_err_count = 1.
    l_single_convert = rs_c_false.
ELSE.
    l_err_count = i_err_count.
    l_single_convert = rs_c_true.
ENDIF.
empty tables
PERFORM clear_sid USING SPACE.
SP7
initialise activation task-handling
IF i_serialize = rs_c_false.
    PERFORM rsadmina_get_values.
    PERFORM init_activate_taskhandler.
ENDIF.
create WHERE condition based on the requests in I_T_REQUEST
PERFORM generate_where_requests(saplrsdro)
    USING i_t_request 'U' CHANGING l_t_where.
same SELECT-statement used multiple times
PERFORM open_cursor_with_hold
    USING    l_t_where
*INSERTAS 13082002 P12/05 <541698>
            rs_c_true "sorting means smaller hash-tables??
              rs_c_false
              g_max_tasks
*ENDINSERTAS
    CHANGING l_cursor.
DO.
    ADD 1 TO l_count.
    FETCH NEXT CURSOR l_cursor INTO l_s_upddata.
    IF sy-subrc <> 0.
      PERFORM register_sids
        USING l_s_upddata rs_c_true rs_c_true.
      CLOSE CURSOR l_cursor.
      EXIT.
    ELSE.
      PERFORM register_sids
        USING l_s_upddata rs_c_true rs_c_true.
      IF l_count >= c_check_intervall. "don't check all the time!
        l_count = 0.
        l_new_sids_possible = rs_c_false.
        IF g_req_BBP_BIDDER_cnt >= c_max_sid_hashtab.
SP7
          refresh l_t_msg.
          PERFORM check_and_get_sids_iobjnm
            USING    '0BBP_BIDDER'
                     l_single_convert
                     l_err_count
                     i_serialize
                     i_checkfl
            CHANGING l_t_msg
                     l_new_sids_possible
                     l_err_found
                     l_subrc.
SP7
          append lines of l_t_msg to c_t_msg.           "note 727227
          PERFORM clear_sid USING '0BBP_BIDDER'.
        ENDIF.
        IF g_req_BBP_BIGUID_cnt >= c_max_sid_hashtab.
SP7
          refresh l_t_msg.
          PERFORM check_and_get_sids_iobjnm
            USING    '0BBP_BIGUID'
                     l_single_convert
                     l_err_count
                     i_serialize
                     i_checkfl
            CHANGING l_t_msg
                     l_new_sids_possible
                     l_err_found
                     l_subrc.
SP7
          append lines of l_t_msg to c_t_msg.           "note 727227
          PERFORM clear_sid USING '0BBP_BIGUID'.
        ENDIF.
        IF g_req_BBP_BID_ID_cnt >= c_max_sid_hashtab.
SP7
          refresh l_t_msg.
          PERFORM check_and_get_sids_iobjnm
            USING    '0BBP_BID_ID'
                     l_single_convert
                     l_err_count
                     i_serialize
                     i_checkfl
            CHANGING l_t_msg
                     l_new_sids_possible
                     l_err_found
                     l_subrc.
SP7
          append lines of l_t_msg to c_t_msg.           "note 727227
          PERFORM clear_sid USING '0BBP_BID_ID'.
        ENDIF.      " l_reached = rs_c_true.
        IF g_req_GN_PAR_SSY_cnt >= c_max_sid_hashtab.
SP7
          refresh l_t_msg.
          PERFORM check_and_get_sids_iobjnm
            USING    '0GN_PAR_SSY'
                     l_single_convert
                     l_err_count
                     i_serialize
                     i_checkfl
            CHANGING l_t_msg
                     l_new_sids_possible
                     l_err_found
                     l_subrc.
SP7
          append lines of l_t_msg to c_t_msg.           "note 727227
          PERFORM clear_sid USING '0GN_PAR_SSY'.
        ENDIF.      " l_reached = rs_c_true.
        IF g_req_LOGSYS_PUR_cnt >= c_max_sid_hashtab.
SP7
          refresh l_t_msg.
          PERFORM check_and_get_sids_iobjnm
            USING    '0LOGSYS_PUR'
                     l_single_convert
                     l_err_count
                     i_serialize
                     i_checkfl
            CHANGING l_t_msg
                     l_new_sids_possible
                     l_err_found
                     l_subrc.
SP7
          append lines of l_t_msg to c_t_msg.           "note 727227
          PERFORM clear_sid USING '0LOGSYS_PUR'.
        ENDIF.      " l_reached = rs_c_true.
        IF g_req_BBP_SYS_BP_cnt >= c_max_sid_hashtab.
SP7
          refresh l_t_msg.
          PERFORM check_and_get_sids_iobjnm
            USING    '0BBP_SYS_BP'
                     l_single_convert
                     l_err_count
                     i_serialize
                     i_checkfl
            CHANGING l_t_msg
                     l_new_sids_possible
                     l_err_found
                     l_subrc.
SP7
          append lines of l_t_msg to c_t_msg.           "note 727227
          PERFORM clear_sid USING '0BBP_SYS_BP'.
        ENDIF.      " l_reached = rs_c_true.
        IF g_req_PROD_CATEG_cnt >= c_max_sid_hashtab.
SP7
          refresh l_t_msg.
          PERFORM check_and_get_sids_iobjnm
            USING    '0PROD_CATEG'
                     l_single_convert
                     l_err_count
                     i_serialize
                     i_checkfl
            CHANGING l_t_msg
                     l_new_sids_possible
                     l_err_found
                     l_subrc.
SP7
          append lines of l_t_msg to c_t_msg.           "note 727227
          PERFORM clear_sid USING '0PROD_CATEG'.
        ENDIF.      " l_reached = rs_c_true.
        IF g_req_PRCA_ID_cnt >= c_max_sid_hashtab.
SP7
          refresh l_t_msg.
          PERFORM check_and_get_sids_iobjnm
            USING    '0PRCA_ID'
                     l_single_convert
                     l_err_count
                     i_serialize
                     i_checkfl
            CHANGING l_t_msg
                     l_new_sids_possible
                     l_err_found
                     l_subrc.
SP7
          append lines of l_t_msg to c_t_msg.           "note 727227
          PERFORM clear_sid USING '0PRCA_ID'.
        ENDIF.      " l_reached = rs_c_true.
        IF g_req_/BIC/ZPROCREF_cnt >= c_max_sid_hashtab.
SP7
          refresh l_t_msg.
          PERFORM check_and_get_sids_iobjnm
            USING    'ZPROCREF'
                     l_single_convert
                     l_err_count
                     i_serialize
                     i_checkfl
            CHANGING l_t_msg
                     l_new_sids_possible
                     l_err_found
                     l_subrc.
SP7
          append lines of l_t_msg to c_t_msg.           "note 727227
          PERFORM clear_sid USING 'ZPROCREF'.
        ENDIF.      " l_reached = rs_c_true.
        IF g_req_/BIC/ZDELTO_cnt >= c_max_sid_hashtab.
SP7
          refresh l_t_msg.
          PERFORM check_and_get_sids_iobjnm
            USING    'ZDELTO'
                     l_single_convert
                     l_err_count
                     i_serialize
                     i_checkfl
            CHANGING l_t_msg
                     l_new_sids_possible
                     l_err_found
                     l_subrc.
SP7
          append lines of l_t_msg to c_t_msg.           "note 727227
          PERFORM clear_sid USING 'ZDELTO'.
        ENDIF.      " l_reached = rs_c_true.
        IF g_req_/BIC/ZDELFROM_cnt >= c_max_sid_hashtab.
SP7
          refresh l_t_msg.
          PERFORM check_and_get_sids_iobjnm
            USING    'ZDELFROM'
                     l_single_convert
                     l_err_count
                     i_serialize
                     i_checkfl
            CHANGING l_t_msg
                     l_new_sids_possible
                     l_err_found
                     l_subrc.
SP7
          append lines of l_t_msg to c_t_msg.           "note 727227
          PERFORM clear_sid USING 'ZDELFROM'.
        ENDIF.      " l_reached = rs_c_true.
        IF g_req_/BIC/ZTYPREL_cnt >= c_max_sid_hashtab.
SP7
          refresh l_t_msg.
          PERFORM check_and_get_sids_iobjnm
            USING    'ZTYPREL'
                     l_single_convert
                     l_err_count
                     i_serialize
                     i_checkfl
            CHANGING l_t_msg
                     l_new_sids_possible
                     l_err_found
                     l_subrc.
SP7
          append lines of l_t_msg to c_t_msg.           "note 727227
          PERFORM clear_sid USING 'ZTYPREL'.
        ENDIF.      " l_reached = rs_c_true.
        IF l_new_sids_possible = rs_c_true.
SP7
          PERFORM check_hierarchy_sids
            CHANGING c_t_msg.                           "note 727227
        ENDIF.
      ENDIF.        " l_count >= c_check_intervall.
    ENDIF.          " sy-subrc <> 0.
ENDDO.
SP7
refresh l_t_msg.
PERFORM check_and_get_sids
    USING    l_single_convert l_err_count i_serialize i_checkfl
    CHANGING c_t_msg l_err_found e_subrc.               "note 727227
SP7
IF i_serialize = rs_c_false.
cleanup activation task-handling
    PERFORM cleanup_activate_taskhandler.
save error messages from asynchronous RFC tasks:
    append lines of g_t_msg to c_t_msg.                 "note 727227
    PERFORM check_hierarchy_sids CHANGING c_t_msg.      "note 727227
    data: l_sx_task      TYPE rsdro_sx_task.
    loop at g_thx_task into l_sx_task.
*INSERTAS 20022003 P11 <596983>
*separate handling of error and started
     if l_sx_task-status   = rsdro_c_task_status-error or
        l_sx_task-status   = rsdro_c_task_status-started.
      if l_sx_task-status   = rsdro_c_task_status-error.
*ENDINSERTAS 20022003
*INSERTAS 26052003 P14 <625425>
MESSAGE ID 'RSDRO' TYPE 'E' NUMBER 122
WITH l_sx_task-taskname INTO l_dummy.
PERFORM msg_sy_append(SAPLRSDRO)
USING RS_C_FALSE CHANGING c_t_msg[].                  "note 727227
       l_s_msg-msgty = 'E'.
       l_s_msg-msgid = 'RSDRO'.
       l_s_msg-msgno = 122.
       l_s_msg-msgv1 = l_sx_task-taskname.
       append l_s_msg to g_t_msg.
*ENDINSERTAS 26052003
*INSERTAS 20022003 P11 <596983>
*extra handling of tasks that did not come back regularly
      elseif l_sx_task-status   = rsdro_c_task_status-started.
*INSERTAS 26052003 P14 <625425>
MESSAGE ID 'RSDRO' TYPE 'E' NUMBER 129
WITH l_sx_task-taskname INTO l_dummy.
PERFORM msg_sy_append(SAPLRSDRO)
USING RS_C_FALSE CHANGING c_t_msg[].                  "note 727227
       l_s_msg-msgty = 'E'.
       l_s_msg-msgid = 'RSDRO'.
       l_s_msg-msgno = 129.
       l_s_msg-msgv1 = l_sx_task-taskname.
       append l_s_msg to g_t_msg.
*ENDINSERTAS 26052003
*ENDINSERTAS 20022003
      endif.
    endloop.
endif.
c_t_msg[] = g_t_msg[].                               "note 727227
ENDFORM.                                                " ACTIVATE_SIDS
More info:
What happened?
Error in ABAP application program.
The current ABAP program "GP421RN9VH6Y2PR0X9WS35LYA6Y" had to be terminated
because one of the
statements could not be executed.
This is probably due to an error in the ABAP program.
Following a SELECT statement, the data read could not be placed in AN
the output area.
A conversion may have been intended that is not supported by the
system, or the output area may be too small.
Error analysis
An exception occurred. This exception is dealt with in more detail below
. The exception, which is assigned to the class 'CX_SY_OPEN_SQL_DB', was
neither
caught nor passed along using a RAISING clause, in the procedure
"ACTIVATE_SIDS" "(FORM)"
Since the caller of the procedure could not have expected this exception
to occur, the running program was terminated.
The reason for the exception is:
The data read during a SELECT access could not be inserted into the
target field.
Either conversion is not supported for the target field's type or the
target field is too short to accept the value or the data are not in a
form that the target field can accept
Missing RAISING Clause in Interface
Program GP421RN9VH6Y2PR0X9WS35LYA6Y
Include GP421RN9VH6Y2PR0X9WS35LYA6Y
Row 9.988
Module type (FORM)
Module Name ACTIVATE_SIDS
Trigger Location of Exception
Program GP421RN9VH6Y2PR0X9WS35LYA6Y
Include GP421RN9VH6Y2PR0X9WS35LYA6Y
Row 10.050
Module type (FORM)
Module Name ACTIVATE_SIDS
Source Code Extract
Line SourceCde
10020 ELSE.
10021 l_err_count = i_err_count.
10022 l_single_convert = rs_c_true.
10023 ENDIF.
10024
10024
10025 * empty tables
10026 PERFORM clear_sid USING SPACE.
10027
10028 *** SP7
10029 * initialise activation task-handling
10030 IF i_serialize = rs_c_false.
10031 PERFORM rsadmina_get_values.
10032 PERFORM init_activate_taskhandler.
10033 ENDIF.
10034
10035 * create WHERE condition based on the requests in I_T_REQUEST
10036 PERFORM generate_where_requests(saplrsdro)
10037 USING i_t_request 'U' CHANGING l_t_where.
10038
10039 * same SELECT-statement used multiple times
10040 PERFORM open_cursor_with_hold
10041 USING l_t_where
10042 *INSERTAS 13082002 P12/05 <541698>
10043 * rs_c_true "sorting means smaller hash-tables??
10044 rs_c_false
10045 g_max_tasks
10046 *ENDINSERTAS
10047 CHANGING l_cursor.
10048 DO.
10049 ADD 1 TO l_count.
>>>>> FETCH NEXT CURSOR l_cursor INTO l_s_upddata.
10051 IF sy-subrc <> 0.
10052
10053 PERFORM register_sids
10054 USING l_s_upddata rs_c_true rs_c_true.
10055
10056 CLOSE CURSOR l_cursor.

More info:
Job started
Step 001 started (program RSODSACT1, variant &0000000002104, user ID
Activation is running: Data target SRBIDO03, from 14.293 to 14.293
Data to be activated successfully checked against archiving objects
SQL: 16.08.2006 18:12:15 U92299
ANALYZE TABLE "/BIC/ASRBIDO0340" DELETE
STATISTICS
SQL-END: 16.08.2006 18:12:15 00:00:00
SQL: 16.08.2006 18:12:15 U92299
BEGIN DBMS_STATS.GATHER_TABLE_STATS ( OWNNAME =>
'SAPBD0', TABNAME => '"/BIC/ASRBIDO0340"',
ESTIMATE_PERCENT => 1 , METHOD_OPT => 'FOR ALL
INDEXED COLUMNS SIZE 75', DEGREE => 1 ,
GRANULARITY => 'ALL', CASCADE => TRUE ); END;
SQL-END: 16.08.2006 18:12:16 00:00:01
ABAP/4 processor: DBIF_RSQL_INVALID_RSQL
Job cancelled

Error - "The data area passed to a system call is too small"

When I will add the invoice, this error raise in the GetLastErrorDescription of company object... What it's wrong with my code ?
    Dim sComp As New SAP.Company
    With sComp
      .Server = "(local)"
      .CompanyDB = "SBODemo_Brazil"
      .UserName = "manager"
      .Password = "manager"
      If .Connect <> 0 Then
        MsgBox(.GetLastErrorDescription)
        Me.Close()
      End If
    End With
    Dim sPedi As SAP.Documents
    sPedi = sComp.GetBusinessObject(SAP.BoObjectTypes.oInvoices)
    sPedi.CardCode = "GUI"
    sPedi.CardName = "f"
    sPedi.DocDueDate = Now
    sPedi.Lines.ItemCode = "1"
    sPedi.Lines.Quantity = 3
    sPedi.Lines.Usage = "3"
    sPedi.Lines.Add()
    sPedi.Lines.ItemCode = "2"
    sPedi.Lines.Quantity = 3
    sPedi.Lines.Usage = "3"
    sPedi.DocTotal = 60
    If sPedi.Add() <> 0 Then
      MsgBox(sComp.GetLastErrorDescription)
    End If

Hi all,
I'm currently getting the same error when trying to add an Incoming Payment... I don't see where the error could be, it works fine on cash, but not on credit cards...
       Dim sap_pay As SAPbobsCOM.Payments
        sap_pay = vCompany.GetBusinessObject(SAPbobsCOM.BoObjectTypes.oIncomingPayments)
        sap_pay.CardCode = cliente
        sap_pay.Invoices.DocEntry = sap_key
        sap_pay.DocDate = Now.Date
        If CashTotal > 0 Then
            sap_pay.CashAccount = CashAcc
            sap_pay.CashSum = CashTotal
        End If
        If CardTotal > 0 Then
            used_cards += 1
            sap_pay.CreditCards.CreditType = SAPbobsCOM.BoRcptCredTypes.cr_Regular
            sap_pay.CreditCards.CreditCard = 1
            sap_pay.CreditCards.PaymentMethodCode = 1
            sap_pay.CreditCards.CreditCardNumber = "0000000000000000"
            sap_pay.CreditCards.CardValidUntil = DateTime.Now.AddYears(1)
            sap_pay.CreditCards.VoucherNum = used_cards
            sap_pay.CreditCards.CreditSum = CardTotal
            sap_pay.CreditCards.CreditAcct = CardAcc
            sap_pay.CreditCards.Add()
        End If
        If AmexTotal > 0 Then
            used_cards += 1
            sap_pay.CreditCards.CreditType = SAPbobsCOM.BoRcptCredTypes.cr_Regular
            sap_pay.CreditCards.CreditCard = 1
            sap_pay.CreditCards.PaymentMethodCode = 1
            sap_pay.CreditCards.CreditCardNumber = "0000000000000000"
            sap_pay.CreditCards.CardValidUntil = DateTime.Now.AddYears(1)
            sap_pay.CreditCards.VoucherNum = used_cards
            sap_pay.CreditCards.CreditSum = AmexTotal
            sap_pay.CreditCards.CreditAcct = AmexAcc
            sap_pay.CreditCards.Add()
            used_cards += 1
        End If
        Dim sap_inv As SAPbobsCOM.Documents
        sap_inv = vCompany.GetBusinessObject(SAPbobsCOM.BoObjectTypes.oInvoices)
        sap_inv.GetByKey(sap_key)
        suma_aplicada = sap_inv.DocTotal
        sap_pay.Invoices.SumApplied = suma_aplicada ' CashTotal + CardTotal + AmexTotal
        IRetCode = sap_pay.Add()
I hope someone can help me...
Thanks !
Alfredo Pérez
www.corponet.com.mx
SAP Developer & Consultant
alperal (at) gmail.com
+52-(81)-137-937-80

"SharePoint list itme update error : Invalid data has been used to update the list item. The field you are trying to update may be read only."

Hi Everyone,
i am facing one problem ...
when i am updating an SharePoint List item, it is throwing above error....
This is my code......
try
                tbl = getListDateTable("NCR");
                DataTable dt = tbl;
                oWebsite = mysite.OpenWeb();
                oList = oWebsite.Lists["NCR"];
                SPListItem itemToUpdate = null;
                foreach (SPListItem listItem in oList.Items)
                    listItem.Update();
                    workOrderID = Convert.ToInt32(txtTitle.Text);
                    itemToUpdate = listItem;
                //SPListItem itemToUpdate = oList.GetItemById(workOrderID);
                //itemToUpdate.Fields["Title"].ReadOnlyField = false;
                //string str = ddlStatus.SelectedValue;
                itemToUpdate["Title"] = txtTitle.Text;
                itemToUpdate["JobNumber"] = txtJobNumber.Text;
                itemToUpdate["PartNumber"] = txtPartNumber.Text;
                itemToUpdate["PartDescription"] = txtPartDescription.Text;
                //itemToUpdate["RequiredBy"] = txtRequiredBy.Text;
                itemToUpdate["ReportedBy"] = txtReportedBy.Text;
                itemToUpdate["WrittenBy"] = txtWrittenBy.Text;
                //itemToUpdate["DateOpened"] = txtDateOpened.SelectedDate;
                //itemToUpdate["DateClosed"] = txtDateClosed.SelectedDate;
                itemToUpdate.Update();
                oList.Update();
               // bind();
            catch (Exception ex)
                throw ex;
Thanks
viswanath

Hi Viswanath,
If you are using People/User Type Field Column then use below code methord
SPUser user = web.EnsureUser(loginName);
item["UserTypeFieldName"] = user;
Lookup Type Field Column then use below code methord
public static SPFieldLookupValue GetLookupFieldFromValue(string lookupValue,string lookupSourceColumn, SPList lookupSourceList)
SPFieldLookupValue value = null;
SPQuery query = new SPQuery();
query.Query = "<Where><Eq><FieldRef Name='" + lookupSourceColumn + "'/><Value Type='Text'>" + lookupValue + "</Value></Eq></Where>";
SPListItemCollection listItems = lookupSourceList.GetItems(query);
if(listItems.Count > 0 )
value = new SPFieldLookupValue(listItems[0].ID,lookupValue);
return value;
item["LookupField"] = GetLookupFieldFromValue(lookupfieldValue, lookupSourceColumn, listName);
Please mark the replies as answers if they help or unmark if not.

Activation date almost passed, no dial tone or bro...

Hi.
After waiting a month for an engineer appointment, I woke up this morning to a text from BT saying that it turns out I didnt need an engineer, my phone line and broadband were activated and I could start using them immediately. My order status on the site is completed as well.
This wasnt the case. I have been constantly checking all day, but I get no dial tone on the phone and the broadband light on my homehub is off. It isnt a problem with the ADSL filter, I still get no dial tone when plugging the phone directly into the master socket.
I'm kind of worried because I have already gone over a month without any internet, and I keep finding posts on forums of people having similar problems that have had to fight with phone support for weeks or months before getting it sorted.

Might be a stab in the dark, but is your new home "new" as in "new-build" new? Reason i ask is i had exactly the same thing occur to me when i moved into my new house, and after the call centre had assured me it was conneted, I unscrewed the faceplate from the phone socket next to the front door to find that Barrett Homes hadn't connected the phone sockets to the External NTE (i.e. the master socket) which is often outside nowadays.
Once connected, broadband worked fine (did it myself, 5 minute job) only problem was that Barretts had wired all the extension sockets with all six wires (huge no-no) which I also rectified (broadband sync went up from 3.5 meg to nearly 6); this isn't a one-off either as I have a friend on the other end of our road with exactly the same YTS wiring in their phone sockets. Hope you get your problem sorted anyways.

Passed phone/broadband activation date...

I know that this has been talked about a lot on these forums, but I'm hoping to get the attention of a Mod who will give me an answer.
I purchased unlimited broadband and calls online on Thursday 9th of September. This is for a new build flat - so my line needs to be activated. I was then informed that my estimated activation date would be Thursday 16th September and that I would not need an engineer to come to my property.
Unfortunately the activation date has passed and neither the phone or broadband works. So I phoned BT, and after being passed about and put on hold repeatedly (often ending in the line going dead after waiting 15 minutes and needing to start all over again), I was told that there was a fault... and some one will call me back in 48 hours to tell me why... not to tell me that they've fixed it, but just to tell me why.
The reason this is so important to me is because I work from home - I need a broadband connection and a phoneline to do my job, and I'm currently relying on a PAYG tmobile 3g dongle and my mobile - which are both costing a fortune (especially the mobile because I make a lot of international calls - something I am sure BT will love to profit from).
Having been mucked about by Sky for 2 months (who also failed to install a phoneline because they consistently failed to communicate with openreach properly - resulting in repeated cancled installs) I don't have the luxury to wait around! Having looked around this forum, it has taken some people months to get connected.
I simply want to know WHY my activation failed, and WHEN it can be fixed. Simple.

Oliver_H wrote:
I know that this has been talked about a lot on these forums, but I'm hoping to get the attention of a Mod who will give me an answer.
I purchased unlimited broadband and calls online on Thursday 9th of September. This is for a new build flat - so my line needs to be activated. I was then informed that my estimated activation date would be Thursday 16th September and that I would not need an engineer to come to my property.
Unfortunately the activation date has passed and neither the phone or broadband works. So I phoned BT, and after being passed about and put on hold repeatedly (often ending in the line going dead after waiting 15 minutes and needing to start all over again), I was told that there was a fault... and some one will call me back in 48 hours to tell me why... not to tell me that they've fixed it, but just to tell me why.
The reason this is so important to me is because I work from home - I need a broadband connection and a phoneline to do my job, and I'm currently relying on a PAYG tmobile 3g dongle and my mobile - which are both costing a fortune (especially the mobile because I make a lot of international calls - something I am sure BT will love to profit from).
Having been mucked about by Sky for 2 months (who also failed to install a phoneline because they consistently failed to communicate with openreach properly - resulting in repeated cancled installs) I don't have the luxury to wait around! Having looked around this forum, it has taken some people months to get connected.
I simply want to know WHY my activation failed, and WHEN it can be fixed. Simple.
(my bold)
Hi Oliver_H and welcome
mod email address - [email protected] (they'll need your name, account number and a link to this thread).
new build - I'll guess that your master socket connections have not been made off (connected), as only BT can do this. This could be why your line isn't active...
It could be a fault, but I'm stilling guessing they're not connected in the master socket...
You really shouldn't, but a quick look (don't touch) at the master socket connections may answer this for you.
-+-No longer a forum member-+-

Activation date passed and still no BB!!!!

I left my previous ISP due to poor service.....I somehow thought BT would be better but so far they have been utter rubbish, I am actually regretting my move from Tiscali/talk talk!! that says a lot as they have got to be the worst ISP's out! My latest problem now that my eagerly awaitied activation date has now passed 22.08.11 and I have no BB connection. I waited up till after midnight last night to check that the activation works and what do you know it didn't! (why don't you activate after midnight the night before your equipment is delivered so that your customers don't get there equipment and then still have to wait till after midnight for any BB) anyways I tried again this morning before work and still no connection...done all the tests i could prior to work and still nothing. This is really frustrating as you were late in delivering the equipment in the first place!! I NEED this sorted asap!! Can anyone point me in the right direction to get the quickest solution please???

try contacting the mods http://bt.custhelp.com/app/contact_email/c/4951
or live chat
live chat http://bt.custhelp.com/app/contact/c/2902/?s_intcid=con_intban_sanda_contact_us_chat_from_forums
mods may take 2/3 days to contact you
this is a customer to customer help forum with the only BT employees being the forum mods
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

Co3 error activation date has passed

Similar Messages

Maybe you are looking for