Cockpit Issue

One of my customers has been using the Cockpit, including the ability to drag Outlook emails to Activities, for some time. Today they reported that one user is unable to use this function. She can drag the email, but the system does not create the Activity. Nothing has changed on her PC or authorizations; she can create Activities manually without any problem. She has rebooted several times.
This is a customer service rep who uses this function frequently every day. Does anyone have an idea of what could have happened or what to do about it?
Thank you.
Marcia

Hi Marcia,
Is this problem solved?
Thanks,
Gordon

Similar Messages

PR to SRM Sourcing Cockpit Issue

In ECC, the ME_SOU* BADI is implemented to activate sending PR of type RV to go to SRM Sourcing Cockpit.
The necessary Workflow Event Linkages are activated in ECC to send the PR to SRM.
When the PR is released, it does not trigger the event to call the workflow. The event trace SWELS at the time of releasing the PR does not show any events triggered.
Any thoughts here to resolve this issue?
Thanks

Hi Kasee,
If you are going to transfer ECC PR to SRM via SOA, the following steps should be configured well in ECC side:
1, LOG_MM_P2PSE_1 should be activated via trx SFW5 in ECC side;
2, implement BADI ME_REQ_SOURCING_CUST;
3, go to trx SWETYPV and check if the following objects are existing:
BUS2015 RFXREQUESTED
BUS2105 SOURCINGREQUESTED
4,activate outbound message as below:
(ERP) Transaction SPRO -> Other mySAP.com components->Supplier Relationship Management->
Message Control-->Activate outbound messages through qRFC
BUS2015 RFXREQUESTED
BUS2105 SOURCINGREQUESTED
5, configure RFC destination for workflow system
6,configure RFC destination for SAP XI
7, create SU01 XI user
8, trx olme: Portal >Set Up Landscape
9, trx smqr: MMPURS_BUS2105_* should be registered.
XML message should be triggered after this.
You may also refer to the following notes:
note 1263876
note 1268336
Hope this helps.
Regards,
Ivy

Sourcing cockpit issue

Hi,
I am having two cases over here.
1) There are some SC which are sitting in my sourcing cockpit even after backend document is created.
2) There are some sc which are not supposed to go into sourcing cockpit.
I need to clean up both scenarios. Please advise if there is any function module or program to do that.
Points will be rewarded.
Munna

Hi,
1) There are some SC which are sitting in my sourcing cockpit even after backend document is created.
See the foll notes:
1050349 - Sourced Shopping cart reappears in Sourcing cockpit
527648
1084987 - Synchronizing documents and status between ERP and SRM.
0001072266 BBP_GET_STATUS_2: Item is not removed from Sourcing Cockpit
0001130842 BBP_GET_STATUS_2: shopping cart sent back to SOCO
0000691569 Error messages in BBP_GET_STATUS_2
0000989891 BBP_GET_STATUS_2: Incorr quantity determination in back end
0001001882 BID: Requirement reappears in sourcing cockpit
0001012124 SHP not reappear in SOCO after backend PO delete
0001027598 BBP_GET_STATUS_2: Error message E 011 in back end
0001032713 BBP_GET_STATUS_2: incorrect sourcing indicator
0001033208 Complete sourcing indicator is getting lost
0001040847 Requirement is removed from sourcing after BBP_GET_STATUS_2
0001041334 BBP_GET_STATUS_2 cannot handle more than one PO
0001044351 BBP_GET_STATUS_2: Error message with reservation
0001049989 External requirements: Object id not found error in XI
0001050349 Sourced Shopping cart reappears in Sourcing cockpit.
0001055375 BBP_GET_STATUS_2: Error message during conversion
0001056941 Shp. cart sent back to SOCO in case of P. Req. or Reservatio
0001062223 BBP_GET_STATUS_2: Performance and runtime error
0001062565 No reference of backend Object ID is updated in Shop. cart
0001066128 Shp cart item is not updated from the related PO
0001084144 BBP_GET_STATUS_2 sourcing relevant indicator
0001088315 External Requirement: Sourcing ind. flag is wrongly set
0001106550 SOCO: completed requirement is sent back to SOCO
2) There are some sc which are not supposed to go into sourcing cockpit.
-You can control this using the badi "BBP_SRC_DETERMINE".
For The existing ones in SOCO,run the report BBP_GET_STATUS_2.
BR,
Disha.
Do reward points for useful answers.

Auto-Id Cockpit Link Issue

Hi
I am using SAP AII 4.0.
When I open the Auto-Id Cockpit link this error message is displayed
500 Internal Server Error
The initial exception that caused the request to fail, was:
com.sap.tc.webdynpro.services.exceptions.WDRuntimeException: Failed to resolve JCO destination name 'AII_WD_RFC_METADATA_DEST' in the SLD. No such JCO destination is defined in the SLD.
Appreciate your help.
Thanks

Hi Yogesh,
Thanks for the reply.
Anything specific thing needs to be checked on Java stack of Netweaver or else the SAP Basis team will understand the issue if I just send them the error
Thanks

SRM 5.0 Sourcing Cockpit (SP 09) issue

Hi,
I'm working on plan driven scenario with system SRM 5.0 (SP 9 - SAPKIBKT09) and ECC 6.0 (SP 8 - SAPKNA7008).
Yesterday we have upgrade SRM package to 09 from 08, and now we have the following issue:
when I try to convert SC (created from a back end purchasing requisition via plan driven channel) in sourcing cockpit into a GOA it's raised the following error "Some backend documents could not be generated, or they contain errors", that before upgrade there isn't!!!
I hope someone could help me.
BR
Marco

Hi Marco,
for a. I still see the following option:
Get a PR into Sourcing Cockpit, extend the contract, close the PR in Sourcing
Cockpit (modify the email sent,when the complete button is pushed).
Besides, I would question the buyer, why he did not extend the contract on own
intension - seems there is a bigger stroy behind this requirements
For b., I am sorry, but I do not understand yet and I have no suggestion yet.
When one ECC PR is transfered to SRM the counterpart is one SC. I assume,
you want to group single items of several SCs into one PO? This would be
possible via the grouping function.
Cheers,
Claudia

HCP course - issues with authorization panel in cockpit

I am unable to assign the required authorizations for the feedback service. In fact my authorizations screen in the HCP cockpit looks very different from what Rui see's on his screen. I do not have a column called Account. I only see columns for Application and Role.
When I try to assign a new role I have no option to specify the account!
Is this yet again another issue where those of use with original HCP trial account user-id's are missing new functionality? My account is p1081110.
3 weeks into the course an I'm still unable to complete the practical exercises from Week 1. Both this accounts issue and also the outstanding issue about not being able to activate the paldemo folder!
Regards.

Marking as answered as per http://scn.sap.com/community/developer-center/cloud-platform/blog/2014/06/12/opensap-hanacloud2-guide-week-1#comment-503428

Sourcing Cockpit email issues

We had to customize the BBP_SOCO_APP_ITEM_COMPL_MAIL completion text and we did the changes as well. However we're facing issues in email notification which has been send to requistioner when the shopping cart is rejected.
Instead of requistioner email ID maintained in SU01, it triggers a email to dummy ID . We have analyzed SU01 and BP for requistioner email ID and it looks correct, however it goes to dummy email ID.
Appreciate you help/suugestion this issue.
Thanks & Regards
Venkat

what is the email id in SOST notification
As per standard REQUESTER get this email.
report to SAP.
Muthu

BI7 Admin Cockpit Data Collection Issue

Hi,
We are in BI7 SP15.
When I run my Z query & run Query Runtime Statistics - Delta process chain i don't see any statistics data in 0TCT_C02. I activated all required objects. But if i run query in 0TCT_MC02 & run delta load i see the records in 0TCT_C02.
I verified 'Tools - BW Statistics for Infoproviders' both 0TCT_C02 and my Zcube (also both quries) has same setting. Am i missing any steps?
Thanks
Ramesh

Thanks for the reply.
After running the delta process chain i can see only the stat data for query from 0TCT_MC21 not for my Zcube. I ran query against my Zcube but i could not see any stat records related to my Zcube queries.
I set RSA1 - Tools - Statistics for InfoProviders for my Zcube to X & 2.
Any help is appreciated.
Thanks
Ramesh

DSD Settlement Cockpit authorisation issue

Hello
We are using paper-based DSD. There are many TPPs mapped to several Settlement offices. Objective is to restrict a user to have a worklist consisting of shipments related to Transportation Planning Point that are assigned to his user-id via authorisation/roles. Currently, all users (irrespective of which state(BSO) he/she belongs to) get a worklist of all shipments.
Any ideas/suggestions on how we can implement such an authorisation?
Ujjwal

Hello,
After you Assign Allowed Settlement Types to Settlement Office in customising use Parameter ID /DSD/SL_BSO and assign it to user profile parameters.
Hope this helps.
Best,
Osnat

LO Cockpit & 0SD_C03

Hello Experts. I am asking this question again as I didn't get any answers last time.
I am creating a report that will have Open Orders, Sales Orders and Deliveries.
For my open orders, I want to see:
1.sales orders or the deliveries, which are not billed
2.deliveries which are not goods issued
3.sales order which are confirmed, but not delivered
4. Or any other type of open order.
I need to know what are the Data Sources in LO Cockpit that I need to activate?
These data sources will be feeding the cube 0SD_C03.
According to my research, I hace listed the following datasources:
2LIS_11VAHDR
2LIS_11_VAITM
2LIS_11_V_ITM
2LIS_11_V_SCL
2LIS_11_V_SSL
2LIS_12_VAHDR
2LIS_12_VCITM
2LIS_12_VCSCL
2LIS_13_VDITM
2LIS_13_VDHDR
I am having serios doubts about using the underlined datasources.
Any help will be greatly appreciated.
Thanks.
Janet

Hi...From my own experience i recommend you to activate the possible datasources that you think could be useful for you...and run the RSA3 transaction in order to see if any of them beings the data you need....
check the Help.sap.com in order to see tha structure for every datsource
Regards

Error while activating TCT and BI admin. Cockpit (Urgent)

Hi Experts,
We are configuring NW 04s BI system right now. We have followed the general settings on the system after Basis handed that over to us accrding to Best Practice config. document. Now to install BI administration cockpit, we need to activate the technical content for executing the BI Admin. cockpit. First of all, when we tried to install technical content automatically, we got this error msg no. RSTCO_UT013 and in our 2nd trial we are getting err msg no RSQBW400. First msg was about the job BI_TCO_ACTIVATION failure. Second msg is " There is no A version of Infoset 0RSTT_I07. Because of the errors, we are not able to install any standard business content. Every time we run a background job, it gets cancelled.
We are applying the OSS notes no. 965386 and 934484. If any one has any idea of resolving the issue plz. let us know. Full points will be awarded for the correct answers. Thanks 

Hi All,
This is best practice in activating BI Statistics and Admin Cockpit.
BI Administration Cockpit and new BI Statistics Content in SAP NetWeaver 2004s - Webinar Details
https://www.sdn.sap.com/irj/sdn/webinar?rid=/library/uuid/d09864c5-0bb0-2910-8e8a-a306a886dcd9
I recomend to use BI CONT 703 SP5.
If not, you need do manual correction and apply more than 50 notes.

Error BRAIN 276 when you execute a Web template in BI Admin Cockpit in EP

Hi Experts,
I have Installed BI Administration Business Packages in Portal and configured necessary steps in BI System.I have assigned the role in Portal and BI System.
I tried executing one iview...and was getting the following error:
Error loading template 0TPLI_0TCT_MCA1_Q0143
and when i click on the above error ..i was getting another window which shows below message:
Technical Information for Message:
Error loading template 0TPLI_0TCT_MCA1_Q0143
Notification Number BRAIN 276
I was suggested by SAP Note 1014795 to do the below changes :
TEMPLATE_ID=0TPLI_0TCT_MCA1_Q0143 To TEMPLATE=0TPLI_0TCT_MCA1_Q0143
Please note that the above note says to replace TEMPLATE_ID by TEMPLATE in the property of "BEX Web application Query String" of the IView in Portal
and also please note that i have Version=SAP BW 2.X/3.X in Iview Property .
After having made the above changes iam getting the BEX Web Analyzer...where i have the options to open a query ( from all the infoareas of BI System).and then i will select the query (0TCT_MCA1_Q0143) and am executing the same to display the data.
i know that this Is not the correct way of executing the iview for BI Admin Cockpit.
Can anyone help me how to execute the Web Template automatically when the user clicks on IView ?
we have all the above Web Templates Corresponding to BI admin cockpit in active mode in when checked from WAD 3.X , but when when i search for the above web templates in WAD 7.0 i do not find them
Is there anything that i need to activate in BI System ? Or in Portal System?
Or do i have to execute the above web templates in BI WAD before linking them to portal iviews?
Do we have to Migrate the Web Templates from BW 3.5 to BI 7.O?
Thanks
P.Navakanth
-When i try to execute the web templates

We are having this exact same issue - example of one of the errors:: Error loading template 0TPLI_0TCT_MCA1_Q0114. We get this error for all MCA1 templates. Basis says they've deployed latest BP BI Administration 1.0 with Patch 2 (BPBIADMINOSP_2-1000342B.SCA).The info refers to BI Admin Cockpit, Business Package for BI Administration,
BP BI ADMINISTRATION 1.0 ,BI Usage Statistics,0TCT_CA1.
I see from documentationthat the multicube 0TCT_MCA1 is from 0TCT_CA1 and 0TCT_VCA1
From the documentation in http://help.sap.com/saphelp_nw70/helpdata/en/26/9ef41d14dc424183b4807538be8e1e/frameset.htm, under web templates,
1) How come there are more than 1 template with same name and Query with same names- for example:
Web Template: Long-Term Trends in Total Runtimes of BI Applications
WebTemplate: 0TPLI_0TCT_MC01_Q0114
This Web template is the container for the query 0TCT_MC01_Q0114 and is designed to provide detailed analyses.
AND
Web Template: Long-Term Trends in Total Runtimes of BI Applications
WebTemplate: 0TPLI_0TCT_MCA1_Q0114
This Web template is the container for the query 0TCT_MCA1_Q0114 and is used for detailed analyses
2) How come the delivered process chains load other technical content, but does not load 0TCT_CA1
Basis re-deployed the bi admin cockpit contents, but still have error in loading template 0TPLI_0TCT_MCA1_Q0114.
3) Do we need to do any of the following?
SE38 u2013 run RSTCC_ACTIVATEADMINCOCKPIT_NEW
RSA1 - bi content, install & transport
Check role SAP_BI_BW_ADMINSTRATOR
Se38 u2013 rs_template_maintain for active templates u2013 look for MCA1 templated
Tr code RSDDSTAT
Activate Virtual providers
Anything else?
Thanks!

Issue in product category replication from R/3 to SRM

Mehul G Shah: BACKGROUND:
We are in the process of replicating Material Group from R/3 to SRM
using transaction R3AR2 & R3AR4. Our Pre-Production server got
refreshed recently & this has caused all EBM data inclucing Logical
System & Destination being overwritten with EBP data.
We have maintained middleware paramaters, viz., CRMCONSUM, CRMRFCPAR,
CRMPAROLTP & also TBE11.
We have also maintained sites in CRM Middleware Monitoring Cockpit
using SMWP.
We have also tried after deleting entries in tables CRMPRLS (R/3) &
CRMMLSGUID (EBM) as suggested by SAP note 765018
We have followed steps mentioned in link /people/marcin.gajewski/blog/2007/02/05/how-to-replicate-material-master-from-r3-to-srm
(But we are not clear about site attributes which needs to maintain as per the CRM Middleware Monitoring Cockpit.)
ISSUE:
Material Group gets replicated to Product Category in SRM. However, the
Product Category gets replicated with Logical System which is not
maintained in EBM

Hi ,
Thanks 4 ur replay,i have maintained Site attributes,please give me detail of site attributes like which attributes should i maintain ?please give me descriptive answer.

Search Help for Custom field in Sourcing Cockpit

Hi SRM Experts,
I added custom field "rush order" in the Structures as per requirement. I added code in MODIFY_SCREEN function module. Search help is working for "rush order" in Process Purchase Orders (to search PO) and Check Status (Searching Shopping Cart). But it is not working in sourcing cockpit. Please guide or suggest me is there any additional settings or programming is required to have search help for custom fields in Sourcing Cockpit.
Thanks a lot in advance.
Thanks,
Koyya

Hi SRM Experts,
Please let me know any suggestion on this issue.
Thanks a lot in advance.
Thanks,
Koyya

Timeout during allocate / CPIC-CALL: 'ThSAPCMRCV' (managment cockpit)

Hi Friends,
I'm getting following error, while accesing BI query data in management cockpit.
ODBO Error:
timeout during allocate / CPIC-CALL: 'ThSAPCMRCV'
Pls suggest me steps to resolve issue.
thanks,
naresh

Naresh,
   Couple of suggestions...If this thread is   still relevant....or please close this thread...
1) Make sure you are   not having any issues with running the query, try running it directly in BEX/RSRT.
2)Once we know that there is no issue with teh query...try running the Trace on the user (ST05) to get further details on the error by trying to run it from management cockpit..
3) Check    Note 1285242 - CPIC-CALL: 'ThSAPCMRCV' no data received.
Hope this helps..
Vishal.

Cockpit Issue

Similar Messages

Maybe you are looking for