ColdFusion Builder 2 and WebDav

I maintain a website that is hosted by a University. Files are synced from my local machine to their server using WebDav. For the previous 5 years I have used Dreamweaver which supports synching to a remote site via WebDav in the site definitions. I have recently begun using CFBuilder, however, which appears to only support synchronization via SFTP or FTP. My question is 2 part:
1. Is there a plugin for CFBuilder / Eclipse that will give me the option of synchronizing via WebDav
2. If there is no plugin what other option would be *Easy*? I have Transmit so I suppose I could use it if that is really the best option.
Server is running CF9 and I am on an iMac running CFBuilder 2 on Snow Leopard.
Thanks.

Please google Eclipse and WebDav. Here is what I turned up.
http://www.eclipse.org/tm/
http://www.eclipse.org/eclipse/platform-team/target.php
http://www.easyeclipse.org/site/plugins/eclipse-webdav-ftp.html
http://stackoverflow.com/questions/318788/webdav-plugin-for-eclipse-3-4

Similar Messages

Coldfusion Builder and Flash Builder 4 Premium

I am not sure should this question go in Flex forum or ColdFusion.
I am going to buy the ColdFusion builder which come with the Flash Builder 4 Standard. And I need to have Flash Builder 4 Premium. So should i buy the upgrade which is US$499 or should i but the full Flash Builder 4 Premuim for US$699?

Adam,
Thanks for the quick/thorough reply! You stated: You can use FB4 to write source files for any version of CF.
With that, I will continue to march foward with what tools I do have; I just didn't want to waste time if the end result wasn't going to work.

Coldfusion Builder beta 3 and Subclipse

Has anyone experienced problems with their working copy getting corrupted? The combination of coldfusion builder and subclipse plugins for my Eclipse 3.5.1 keeps causing me to have checksum and other errors when trying to update or commit. Am I the only one with these issues or are other having them, too?

Try to reinstall from subclipse plugin
http://subclipse.tigris.org/servlets/ProjectProcess;jsessionid=5A6C1A9EF0E5933BD72C16B9501 84B37?pageID=p4wYuA

ColdFusion Builder won't start at all

After installing Coldfusion Builder and Flash Builder as standalone installations on WinXP, I can't start either of them.
In the Coldfusion Builder folder where the the .exe is located, I get the hs_pid.log log files that you would normally see from a problem in eclipse. I get the same exact problem with Flash Builder with the same hs error logs after the program fails. Obviously they are suffering the same problem and the root of the problem is the embedded eclipse they are using.
Any ideas? I realize that it would be difficult to debug considering the complete lack of details about why the apps fail. That's due to Adobe offering no user feedback when they fail.
My guess is that it's a problem with the JRE in the installs, but there's no debugging info to find out what is going on. When I try FlashBuilderC.exe standalone, I get the following:
C:\Program Files\Adobe>"Adobe Flash Builder 4\FlashBuilderC.exe"
# A fatal error has been detected by the Java Runtime Environment:
# Internal Error (os_windows.cpp:3266), pid=19764, tid=26520
# Error: DuplicateHandle failed
# JRE version: (uninitialized)
# Java VM: Java HotSpot(TM) Client VM (14.2-b01 mixed mode, sharing windows-x86 )
# An error report file with more information is saved as:
# C:\Program Files\Adobe\hs_err_pid19764.log
# If you would like to submit a bug report, please visit:
#   http://java.sun.com/webapps/bugreport/crash.jsp
I can run Flashbuilder as an eclipse plugin, and I suspect that I could run CFBuilder as a plugin also but that's not really what I want to do. It's just frustrating that products that cost thousands of dollars fail silently, offer no recovery, and won't run at all from a fresh standalone install.

I'm using 1.6 for my Java stuff and for the plugin versions of CFB and FB4. Each builder standalone has it's own JRE which appears to be the same version (except for FB4 which is only a couple builds off). Both builders reference the same internal error file os_windows.cpp. As I mentioned earlier, both IDEs are currently running fine as eclipse plugins in my home directory.
U:\>java -version
java version "1.6.0_18"
Java(TM) SE Runtime Environment (build 1.6.0_18-b07)
Java HotSpot(TM) Client VM (build 16.0-b13, mixed mode, sharing)
C:\Program Files\Adobe\Adobe ColdFusion Builder\jre\bin>set PATH=
C:\Program Files\Adobe\Adobe ColdFusion Builder\jre\bin>.\java.exe -version
java version "1.6.0_18"
Java(TM) SE Runtime Environment (build 1.6.0_18-b07)
Java HotSpot(TM) Client VM (build 16.0-b13, mixed mode)
C:\Program Files\Adobe\Adobe Flash Builder 4\jre\bin>set PATH=
C:\Program Files\Adobe\Adobe Flash Builder 4\jre\bin>.\java.exe -version
java version "1.6.0_16"
Java(TM) SE Runtime Environment (build 1.6.0_16-b01)
Java HotSpot(TM) Client VM (build 14.2-b01, mixed mode)
hs_err_pid27396.log
# A fatal error has been detected by the Java Runtime Environment:
# Internal Error (os_windows.cpp:3276), pid=27396, tid=29696
# Error: DuplicateHandle failed
# JRE version: (uninitialized)
# Java VM: Java HotSpot(TM) Client VM (16.0-b13 mixed mode, sharing windows-x86 )
# If you would like to submit a bug report, please visit:
#   http://java.sun.com/webapps/bugreport/crash.jsp
--------------- T H R E A D ---------------
Current thread is native thread
Stack: [0x00030000,0x00130000], sp=0x0012fba4, free space=3fe0012fbb4k
Native frames: (J=compiled Java code, j=interpreted, Vv=VM code, C=native code)
V [jvm.dll+0x1f4000]
V [jvm.dll+0xa1cc8]
V [jvm.dll+0x17d0e3]
V [jvm.dll+0x1030a0]
C [eclipse_1206.dll+0x501e]
C [eclipse_1206.dll+0x4721]
C [eclipse_1206.dll+0x152c]
C [CFBuilder.exe+0x1495]
C [CFBuilder.exe+0x1181]
C [CFBuilder.exe+0x4a3a]
C [kernel32.dll+0x17077]
--------------- P R O C E S S ---------------
VM state:not at safepoint (not fully initialized)
VM Mutex/Monitor currently owned by a thread: None
Dynamic libraries:
0x00400000 - 0x0040e000     C:\Program Files\Adobe\Adobe ColdFusion Builder\CFBuilder.exe
0x7c900000 - 0x7c9b2000     C:\WINNT\system32\ntdll.dll
0x7c800000 - 0x7c8f6000     C:\WINNT\system32\kernel32.dll
0x6f000000 - 0x6f06c000     C:\WINNT\system32\SYSFER.DLL
0x7e410000 - 0x7e4a1000     C:\WINNT\system32\USER32.dll
0x77f10000 - 0x77f59000     C:\WINNT\system32\GDI32.dll
0x773d0000 - 0x774d3000     C:\WINNT\WinSxS\x86_Microsoft.Windows.Common-Controls_6595b64144ccf1df_6.0.2600.5512_x-ww _35d4ce83\COMCTL32.dll
0x77c10000 - 0x77c68000     C:\WINNT\system32\msvcrt.dll
0x77dd0000 - 0x77e6b000     C:\WINNT\system32\ADVAPI32.dll
0x77e70000 - 0x77f02000     C:\WINNT\system32\RPCRT4.dll
0x77fe0000 - 0x77ff1000     C:\WINNT\system32\Secur32.dll
0x77f60000 - 0x77fd6000     C:\WINNT\system32\SHLWAPI.dll
0x76390000 - 0x763ad000     C:\WINNT\system32\IMM32.DLL
0x10000000 - 0x1001e000     C:\WINNT\system32\privman32.dll
0x7c9c0000 - 0x7d1d7000     C:\WINNT\system32\SHELL32.dll
0x72000000 - 0x72014000     C:\Program Files\Adobe\Adobe ColdFusion Builder\plugins\org.eclipse.equinox.launcher.win32.win32.x86_1.0.200.v20090519\eclipse_12 06.dll
0x77c00000 - 0x77c08000     C:\WINNT\system32\VERSION.dll
0x6d8b0000 - 0x6db47000     C:\Program Files\Adobe\Adobe ColdFusion Builder\jre\bin\client\jvm.dll
0x76b40000 - 0x76b6d000     C:\WINNT\system32\WINMM.dll
0x7c360000 - 0x7c3b6000     C:\WINNT\system32\MSVCR71.dll
0x76bf0000 - 0x76bfb000     C:\WINNT\system32\PSAPI.DLL
VM Arguments:
java_command: <unknown>
Launcher Type: generic
Environment Variables:
JAVA_HOME=C:\java\jdk1.6.0_18\jre
JRE_HOME=C:\java\jdk1.6.0_18\jre;C:\java\jre6
CLASSPATH=.;JDK_HOME;JAVA_HOME;C:\java\jre6\lib\ext\QTJava.zip
PATH=C:/Program Files/Adobe/Adobe ColdFusion Builder/jre/bin/client;C:/Program Files/Adobe/Adobe ColdFusion Builder/jre/bin;C:\Program Files\Adobe\Adobe ColdFusion Builder;C:\java\jdk1.6.0_18\bin;C:\java\jdk1.6.0_18\lib;C:\java\jdk1.6.0_18;C:\java\jdk1. 6.0_18\jre;C:\java\flex_sdk_4\bin;C:\java\flex_sdk_4\;C:\Program Files\Serena\Dimensions 10.1\CM\prog;C:\servers\subversion;C:\Ent\Appl\Prod\Oracle8i\bin;c:\ent\appl\prod\Oracle8 i\JRE\bin;C:\WINNT\system32;C:\WINNT;C:\Serena\CHANGE~1\DIMENS~1\9.1\PROG;c:\ent\appl\prod \perl\5.00502\bin\MSWin32-x86;c:\ent\appl\prod\perl\5.00502\bin;C:\WINNT\system32\wbem;c:\ ent\appl\prod\bin;C:\Program Files\Common Files\Roxio Shared\DLLShared\;C:\Program Files\ATI Technologies\ATI.ACE\;C:\DSM\Script\;C:\ent\appl\prod\Exceed\Connectivity\10.00\Accessori es\;;C:\servers\cake\cake\console;C:\servers\xampplite\php;C:\java\apache-maven\bin;C:\jav a\ant\bin;C:\Program Files\CA\SC\CAWIN;C:\Program Files\ActivIdentity\ActivClient\;C:\Program Files\QuickTime\QTSystem\;C:\servers\SDK\bin;C:\Program Files\IDM Computer Solutions\UltraEdit\
USERNAME=pritcjm
OS=Windows_NT
PROCESSOR_IDENTIFIER=x86 Family 6 Model 23 Stepping 6, GenuineIntel
--------------- S Y S T E M ---------------
OS: Windows XP Build 2600 Service Pack 3
CPU:total 2
Memory: 4k page, physical 3652840k(1812720k free), swap 7137288k(4992188k free)
vm_info: Java HotSpot(TM) Client VM (16.0-b13) for windows-x86 JRE (1.6.0_18-b07), built on Dec 17 2009 13:35:55 by "java_re" with MS VC++ 7.1 (VS2003)
time: Thu Apr 29 08:52:56 2010
elapsed time: 0 seconds

ColdFusion Builder 2 RDS Debugging error.

I am running a Windows 7 Professional 64-bit system with ColdFusion 9.01 (Developer Edition). I just downloaded the trial version of ColdFusion Builder and cannot get the debugger to work. I have followed all the instructions concerning making sure RDS is enabled in ColdFusion (which it was for my old CFEclipse version and some Flex apps). I've done everything I can think of for configuring CF Builder, but I cannot get the debugger to work. When I go to RDS configuration in CF Builder and click "Test Connection," A popup states that "Test connection was successful." Since I'm using IIS and not the CF built-in web server, I configured the Server Information using port 80. However, when I click "Test Debugger," I get an error: "Test debugger failed. The debugger server is currently listening on port 51,367..." So, I change the port to 51367. The connection tests successfully again, but when I test the debugger, I get another error: "Test debugger failed. An RDS connection was established but the ColdFusion RDS line debugger could not be contacted. The server gave the following message: -1: Could not initialize class coldfusion.logs.CFlogs." I cannot find any reference to that error message using Google, or searching Adobe. When I click on the "bug" drop-down and then click the name of "Debug server," I get a similar, but different and longer error:
Unable to connect to the RDS server 'ColdFusion'.
Ensure that the server is currently running and that line debugging and RDS are enabled. You may also need to check your RDS connection settings in Eclipse to ensure that they are correct.
Error message:
-1:Error connecting to JVM for debugging at localhost:5005. Could not attach the VM at port 5005. You must specify this debugger port in the JVM settings of you application server, for example: -Xdebug -Xrunjdwp:transport=dt_socket,server=y,suspend=n,address=5005. You will also need to make sure that another debugger is not currently connected to the CF JVM at the same port (5005).
Root cause ->
Connection refused: connect
I check in the jvm.config file and those settings are already there. So, does anyone have a clue about any of this? I've run all possible CF and JRE updates, I've not only stopped and restarted the ColdFusion service several times, but I've even rebooted my system. This should be a simple process.

CF Line Debugger is enabled. every thing is configured perfectly. This is a error which I've never seen before.
Actually, I am a IT Manager in a Software company and we need to setup a remote CF9 Server for development and testing with debugging. This is a centralize server for my team to work and test. Currently we are working using dreamviewer and every thing is going fine with this tool but as you know there is no good debugger tool in DW so we have decided to work in CFBuilder 2. Below you will find the jvm config in my CF Server.
========================================================================================== =======================
-Xdebug -Xrunjdwp:transport=dt_socket,server=y,suspend=n,address=5005 -server -Dsun.io.useCanonCaches=false -XX:MaxPermSize=192m -XX:+UseParallelGC -Xbatch -Dcoldfusion.rootDir={application.home}/../ -Dcoldfusion.libPath={application.home}/../lib -Duser.language=en -Duser.country=US -Dfile.encoding=UTF-8 -DDEBUGGER_SERVER_PORT=5005 -DDEBUGGER_TRACE=true
========================================================================================== =======================

New Platform Support for ColdFusion 10 and ColdFusion Builder 2.0.1: Windows 8 and Windows 2012 Serv

Microsoft Windows 8 and Microsoft Windows 2012 server are now supported platforms for ColdFusion 10. The new Windows installers are available for download to all retail and licensing customers as well on the trials download page.
The ColdFusion Builder 2.0.1 installers have also been updated to support Windows 8. The existing MAC OS X installer for ColdFusion Builder 2.0.1 has also been certified to now support MAC OS X 10.8.
Refer this technote for more details about the support.

@Adam @CarlV
>what's the version number when you dump the server scope?
ColdFusion Server - Evaluation 10,0,8,284032
OK I see, the I button reports differently to Settings Summary.
About ColdFusion »
System Information
Server Details
Server Product ColdFusion
Version 10,0,8,284032
Tomcat Version 7.0.23.0
Edition Enterprise (Trial)
Serial Number
Operating System Windows Server 2012
OS Version 6.2
Update Level /D:/ColdFusion10/cfusion/lib/updates/chf10000008.jar
Server Settings > Settings Summary
System Information
Server Details
Server Product ColdFusion
Version ColdFusion 10,284032
Edition Enterprise (Trial)
Operating System Windows Server 2012
OS Version 6.2
Update Level /D:/ColdFusion10/cfusion/lib/updates/chf10000008.jar
Adobe Driver Version 4.1 (Build 0001)
Regards Carl M.

How to show cfm, html, js, css, and browser tab in coldfusion builder 3?

On Coldfusion Builder 2, I see these tabs are available when I create a new page, but not on Coldfusion Builder 3.
What should I do to show them on CFB 3?

Builder 3 does not seem to offer those sub-tabs in its toolbar, but if you open each of those kinds of files, you’ll find that the top toolbar (where they appeared) shows many of the same icons for each of those type of files as was previously listed in those sub-tabs.
I realize that isn’t as helpful if you are opening a single CFM or HTML file which happens to have also HTML, CSS, and JS code in it. You won’t see the icons for that other kind of code, even when you move to such code.
FWIW, note that CFB 1 and 2 had previously relied upon an underlying 3rd party tool called Aptana, for most such HTML, CSS, and JS-specific functionality. In CFB3 that product was dropped and the CFB team tried to recreate much of its functionality. This (the tabs for other code within a single file extension) may be something they didn’t think was used often, or maybe there was a challenge in doing so.
Even so, do note also that there is still support for CSS and JS (and HTML) within a CFM page, in terms of CFB’s features like code completion, code assist, outline view, etc.
Still, I realize that some of the “wrap”-oriented tools in that old toolbar aren’t accessible any other way, so you may want to file a feature request (or bug report, however you may want to cast it) at bugbase.adobe.com.
Hope that’s helpful.
/charlie

New Coldfusion Server Setup in Flashbuilder and Coldfusion Builder not working

I have not found the combination for adding a new Coldfusion Server in Flash Builder 4.7 or Coldfusion Builder 2.01 with Coldfusion 10. I am running windows 7 64bit. on IIS 7. Coldfusion 10 is running fine.
All was well with Coldfusion 9 Flash Builder 4.6 and Coldfusion Builder 2.0.
Local Server Settings for CF9 were
Server Home C:\Coldfusion9
Document Root C:\inetpub\wwwroot
Version: 9.0.x
Now as soon as I put in C:\Coldfusion10 or C:\Coldfusion10\cfusion I get an error "Server home is not valid".
Any hints on getting this going.

Hi Jeff,
Can you let us know the directory location for wwwroot on your system.
jeffcg2 wrote:
That does not work. As soon as I put C:\ColdFusion10\cfusion in the Server Home I get the error Server Home Invalid. I have uninstalled Coldfusion 10 and re-installed added the latest updates. Coldfusion 10 is working fine running on IIS 7.
Not necessarily. As soon as you select the "cfusion" location, it would automatically pick the wwwroot location.
jeffcg2 wrote:
With Coldfusion 10 , since you have C:\ColdFusion10\cfusion\wwwroot. as the Document root will this only work if you install the included web server?
Regards,
Anit Kumar

Dreamweaver and ColdFusion Builder

Dreamweaver has frontend design tool and have SQL builder to access database server.
I just wonder if I have Dreamweaver then I do not need Coldfusion Builder for server side.
Please let me know if I am wrong,
iccsi

Have a look here http://forums.adobe.com/message/3084791#3084791
Gramps

What is the difference between Coldfusion 9 and Coldfusion Builder?

in plain english

ColdFusion 9 is a web application server. It gets installed on the same machine as a web server, typically, and will generate output when someone requests a URL that corresponds to a CF script in their browser. ColdFusion 9 is necessary to run CF programs.
ColdFusion Builder is a development environment for ColdFusion programmers. It allows programmers to write and debug the scripts you put on a CF server. While it's very helpful, it's not required to write CF programs. It also doesn't run CF programs - you need ColdFusion for that.
Dave Watts, CTO, Fig Leaf Software
http://www.figleaf.com/
http://training.figleaf.com/

The internal html viewer is not working in coldfusion builder 2.

It is so frustrating how hard this is. I finished setting up coldfusion and coldfusion builder 2 with an apache local webserver and was hoping to make use of the internal html viewer but it won't come on! All I see is a blank grey page with no content. After creeping around the forums for a while it seemed that the simplest solution was to use the internal coldfusion server so I uninstalled everything and did just that, reverting my administrator page to http://localhost:8500/CFIDE/administrator/index.cfm (working and launchable from the IDE), placing my webroot at C:\ColdFusion9\wwwroot and with all the folders in their right place. The server is running ok and when I launch the run as "coldfusion administrator" option to run my index file, it succesfully opens the external browser and displays the page.
I have the same setup on my desktop at home, the same files, installation, everything! and it works but not on my laptop. I followed Ben Forta's instructions to a T and yet I still am not getting the html preview. I even tried to hard code the absolute url in the html preview settings and still nothing but that annoying grey.
Is this a bug? There doesn't seem to be anything about it in the bug reports. It is quite infuriating how something that seems so miniscule could be such an annoyance. I have already gotten quite used to the preview pages and coldfusion and I would prefer to code that way rather than making use of dreamweaver which I feel I am being forced to use, but at least it's consistent.
Please if anyone could provide some answers and help I would really appreciate it! I have only so much hair left!
Thanks!

Perhaps others may recognize and resolve this for you. I and others here often can and do offer quick solutions to many problems. And I can appreciate that it’s reasonable to think that something so simple should just work. But in this case I think are simply too many variables that could explain why things are not working for you. And while I can also appreciate that you will prefer to get a solution for free if anyone can offer it, I just can’t even begin to offer all the possible problems and solutions, at least by email, in this case. Again, maybe someone else will make a quick connection.
But I will point out that if you’re willing to pay US$75, I offer a service of remotely troubleshooting any one CFBuilder problem for that fixed price. Hopefully I might help you solve it quickly (when I can see exactly what’s going on in your environment), but you will not pay if I don’t solve the problem in up to 2 hours effort. If you may be interested, see www.carehart.org/consulting/ for more, and if you want to set up a time to get together (over the web), drop me an email at [email protected]
Finally, please note that I don’t often point out this service here on the forums. I generally just offer suggestions (sometimes lengthy ones) without any commercial expectation, so please don’t regard this as me engaging in “abusive unsolicited commercial email”. I’m just offering a possible solution, given the OPs sincere challenge in solving things.
/charlie

How does one get ColdFusion Builder.

I understand that if one buys ColdFusion builder, one gets Flash Builder Standard included. If one buys Flash Builder Premium one gets a license for ColdFusion Builder included.
Well, I am currently installing Creative Suite 5 Web Premium, which includes Adobe Flash Builder (level unknown) as well as Dreamweaver, fireworks, flash pro, photoshop, ect. But not ColdFusion Builder. Seems to be an odd item to be left out of that list?

The way I understand it, CF Builder comes with Flash Builder Premium and CS5 premium includes Flash Builder Standard, which does not come with CF Builder.
A while ago, my sister bought me Flex Builder 3 as a gift. It did not come with data visualization (charts), which I wanted. So I called Adobe, explained the issue, and they let me get the charts and pay the difference.
So it might be worth your while to make a phone call to Adobe sales and ask if you can pay the difference between FB Standard and FB Premium, so you can get CF Builder.
You never know until you try. Good luck,
Carlos

Adobe ColdFusion Builder Bugbase: Vote for Some of these Bugs to be Fixed

As I'm sure you know CF Builder 3 isn't quite perfect yet and the Adobe Bugbase has a not-so-great search interface so I thought I would share some issues I reported recently which have impacted my workflow with the product. Perhaps some of my fellow developers have also run into these annoyances. If you have, or if you feel like supporting these issues to get Adobe's developers to fix them, I encourage you to also leave a note on each bug to increase the likelihood that they get fixed in the next release. Feel free to also post links to bugs/feature requests you've submitted and perhaps the community will also support your bug reports as well.
Below please find the name and link to each bug/feature request. To vote for the bug please click the "my vote" button at the bottom right corner of the page.
Bug 1:Code Coloring Breaks When Comments Used Within Function with Named Arguments
Bug#3831825 - Code Coloring Breaks When Comments Used Within Function with Named Arguments
Bug 2: ColdFusion Builder 3.0 Hangs When Using Code Assist on Large Files
Bug#3833130 - ColdFusion Builder 3.0 Hangs When Using Code Assist on Large Files
Note: Adobe has asked for code samples on this one. If you have a large CFM or CFC file that hangs when trying to provide suggestions please upload your file to the bug report.
Feature Request 1: Code Suggest Enhancement: Ability to disable code suggest for variables / tags independantly
https://bugbase.adobe.com/index.cfm?event=selectBug&CFGRIDKEY=3854326
Note: This one is related to the above bug (bug #2). I believe that if we can turn on/off specific types of suggestions we can improve the performance when using code assist. This one will need a lot of votes since it's a feature request.
Bug 3: ColdFusion Builder Ignores CFELSEIF/CFELSE Tags in Outline
https://bugbase.adobe.com/index.cfm?event=selectBug&CFGRIDKEY=3865754

Thanks Carl. I haven't tried Twitter yet as I don't really have any followers that are fellow developers. I've been looking for other people with relevant problems though on forums (this one, stackoverflow, etc...) and when I encounter them I pass along my bugbase submissions.

How do I add/update/delete data using ColdFusion Builder 3?

I feel like this is a really simple and stupid question and should be easy to figure out, but I can't.
I am relearning ColdFusion after 12 years out of the IT field. I am using the ColdFusion 9 Getting Started:Volume 1 book. In Chapter 7 it states that I need to edit the Application.cfc file so that I can edit the database rather than just selecting from the database. I can't seem to find anything related to that file in any search. In my ColdFusion 11 Administrator I have set this mySQL database to be able to be edited, but ColdFusion Builder 3 doesn't seem to allow any editing of the tables. I have not had much luck searching for help regarding this on the internet either. My biggest problem so far is getting ColdFusion Builder to talk with my mySQL database properly so I can actually get on with relearning ColdFusion and writing code. Frustrating!!

I do have ColdFusion 11 Administrator installed. When I go to Data and Services there and open the datasource (OWS) that I want to connect to and query off of, and go to Advanced Settings, I show that the following are selected:
SELECT
CREATE
GRANT
INSERT
DROP
REVOKE
UPDATE
ALTER
Stored Procedures
DELETE
If, in ColdFusion Builder 3, I open the RDS Query viewer and write the following basic update query (Server: default:local; Datasource: OWS):
insert into directors(FirstName, LastName)
Values ('Benjamin', 'Forta');
I get the following RDS error message:
java.sql.SQLException: Can not issue data manipulation statements with executeQuery().
According to the book and some information I have seen online, the SQL Query Tool, for security's sake, by default allows execution of SELECT statements, but no other SQL statements. According to the book, to change this behavior I need to edit the Application.cfc file in the ows/sql directory. I have to change the THIS.select_only flag from the default of yes to no and save the file. I cannot find this file anywhere. I have seen an application.cfm, but I think this is different that what they want because I can't find anything in that file that says THIS.select.

ColdFusion Builder 3 Settings Reset on Restart

I've downloaded the ColdFusion Builder 3 trial and am experiencing some odd and very annoying behavior.
I've customized some code editor text font and color settings. I've added an entry to the CF Servers panel for an instance of ColdFusion 10 running inside a VMWare virtual server on my laptop.
When I restart Eclipse, all the code customizations I've made are reverted back to the default install settings and the entry in my CF Servers panel is gone.
I've been an IntelliJ user for well over a year, but in doing much more cfscript-based development the CF Plugin for IntelliJ is proving to be a hindrance so I thought I'd give CFB 3 a try and see if there were any improvements over CFB 2. However, I can't take this kind of behavior. Hopefully someone can give me a setting or someone else has seen this before and can give me an idea of where to start looking.
I have CF Builder installed as a plugin into Eclipse Kepler 64-bit for Mac. I added the CF Builder update site and have updated to CF Builder 3.0.0.290000. I also previously installed as the standalone version with no additional plugins and experienced the same behavior.
Anyone have any ideas?
Thanks,
Dan

Milan...
My apologies for taking so long to get back to this. I just did some testing tonight of your instructions as well as those by Kaif above.
Firstly, I installed ColdFusion 10 locally on my Mac. I added the local server to the CF Servers panel successfully. After restarting Eclipse, the localhost entry remained in the CF Server panel.
Secondly, I followed your instructions to make a new profile and make my font/coloring customizations in it. I restarted Eclipse and my font and color selections were maintained (through 3 restarts). I noted that my newly created profile was selected in Preferences after each restart.
I then added a remote CF 10 server to the CF Servers panel successfully (as noted by the panel telling me that the server was running and being able to launch the CF Admin from within Eclipse). At this point there were 2 entries in my CF Server panel--localhost and the one remote server that lives inside my VM. I restarted Eclipse and when it came back up, only the localhost server remained. I might add that the VM has ColdFusion 10 installed in "multi-instance" mode and that the remote server instance that I added to the CF Servers panel was one of 4 CF instances configured and running inside the VM.
All the while, my font and color customizations have remained the way I set them.
So, it appears as though we're down to just one bug relating to remote server registrations in the CF Servers panel.
I saw that another user was reporting something similar in this thread: ColdFusion Builder 3 RDS and Remove Server settings reset on each restart so apparently it's not just me.
Thanks to you and everyone else for all the ideas and troubleshooting help thus far. At least at this point I think I might be able to use this for day-to-day coding, even though I really want the remote server system to work correctly so I can use the step debugger feature again.
Dan

ColdFusion Builder 2 and WebDav

Similar Messages

Maybe you are looking for