Communication from the Oracle Management Service.....

Hi everybody,
I've got a problem after installing agent on one my server hosting Solaris 9 and Oracle 9i.
In my grid, my server is discovered but when I click on database which is up (icon key green), i tried to log on and I receive this error message :
Io exception: The Network Adapter could not establish the connection
Anyway, when I have a look on Management system, agent Tab, I cannot configure my monitored targets and I have a small message in red under my machines :
Communication from the Oracle Management Service host to the Agent host failed. Refer to help for details. UnknownHostException sending request :: chsunnprod01: chsunnprod01
Thanks in advance.
David

clear indication listener is not running on your box
Does you agent is up and running and loading whole info to oms
check your upload dir if any xml file are there Then try to manualy upload
bu using command ./emctl upload

Similar Messages

  • Communication from the Oracle Mngt service host to the agent host failed

    Hi There,
    I have installed Oracle 10.2.0.1 Grid software on a Solaris Zone. I plan to upgrade it to 10.2.0.5 very soon but would like to test the agent connection from a remote server first. I installed agent version 10.2.0.5 on the remote server. When I log into the oracle grid GUI I can see the host called "localhost" (this is not the correct name. It should be the server name) and the database instances on that server. However, when I select the localhost and press the configure button I get the following message:
    Communication from the Oracle Mngt service host to the agent host failed. Refer to help for details localhost:cn=servername
    The system administrators changed the /etc/hosts file to make sure the server was listed first fully qualified. For example: servername.domain.com instead of servername. However, this did no make a difference.
    Could the issue be any of the following:
    - Oracle 10.2.0.1 GRID does not work with 10.2.0.5 agents ?
    - Oracle GRID in general don't work on SOLARIS Zones?
    Please help.
    Thanks.

    OMS - -> Agent communication is not upward compatible
    Downward, so Agent 10.2.0.1 --> OMS 10.2.0.5, should not be a problem.
    In the last case however, you would not have access to any 10.2.0.5 Agent features.
    So you can choose from 2 working options:
    1 - Install the 10.2.0.1 Agent
    2 - Upgrade your OMS to 10.2.0.5 (preferable)
    Regards
    Rob
    For more info, tips and tricks on OEM GC, check http://oemgc.wordpress.com

  • Feed back needed about the Oracle support service request

    Dear Oracle professional,
    When you have an issues in the Oracle softwares while doing the installations or working funcnalities.
    Is it good to get it touch with Oracle support services to get supports or Self efforts is good.
    Some company's are feeling get supports is not good way of approach from the Oracle supports services.
    Rather they would keep thier business on hold till they get the supports by themself.the daly will causes in to the business losses because of the time.
    And their business production will be less.
    By getting Oracle supports you get the solutions faster this helps to increase the productivities high.
    Some IT Manages will like to play this role always find a solutions by themself and eaten up the time.
    Why this is happending with them?
    Any issues or eagostics with them?
    Feel free to express it to me, i would be happy to hear this please.
    Thanks
    Riyas
    email [email protected]

    Clearly it is a trade of between high productivity vs time & money.
    So now a days companies which i have seen that they will have internal team of SMEs which will try to look into issues and there are certain escalation points from where in you will get some support from Oracle support.
    and again this changes from organization to organization not a thumb rule.
    Regards
    Prashant Pathak

  • Error communicating with the Cluster Manage Web Service

    Hi,
    i connected oracle database with the Endeca Studio but while uploading Departments dataset i m getting this error
    "Error communicating with the Cluster Manage Web Service" so plz can anyone explain me wat is this error about.
    thanks in advance

    I actually ran into this myself- as Pat notes, it's hard to say without seeing log files, but I think that perhaps the default domain profile that the Endeca Server uses for domains created using Provisioning services has not been created.  First see what domain profiles exist.  Navigate to wherever endeca-cmd lives (e.g., user_projects/domains/endeca_server_domain/EndecaServer/bin), and use the list-dd-profile command:
    -bash-3.2$ ./endeca-cmd.sh list-dd-profiles
    The profiles that exist will be returned in your terminal window:
    prov_dd_profile
    default
    If you only see 'default', then you will need to create 'prov_dd_profile'
    ./endeca-cmd.sh put-dd-profile prov_dd_profile
    Then try uploading your file again in Studio.
    Cheers,
    Andrew

  • Problem starting the Oracle Management Server service

    Hi
    I have configured the Oracle Management Server (since I need to use the Jobs functionality) in an Oracle 9i home installed in my desktop. Then I have tried to put the service to work; it always starts and stops at once; the message also states that some services are automatically shutted down when they are not in use...
    Also, I noticed that I cannot use the typical option when creating the repository for OMS because it does not accept the domain my computer is in (dgsaude.min-saude.pt) since it seems to be an invalid domain name...
    I am a little under pressure here...Please help

    Thank you very much; I will take a look at documentation; anyway, just a question I am in doubt about..the tasks I need to automate have to do with deleting the contents of some local tables, then run some SqlPlus queries to fill those tables again (I run them locally by using a database link to another database); final tables will be connected to an www site and refreshed. As I have understood, I can do this using DBMS_JOBS (for which, I think, I would need to learn some PL/SQL...) or configure the OMS to do it (which, as you said, can be a bit of a pickle in the start...). Given the situation, which one of these tools would you advise me to use?
    Thank You
    Andre

  • I want to share files from iMac to MacBookPro.  In "Sharing" setup I want to check "screen Sharing" but get the error message"Screen Sharing is currently being controlled by the Remote Management service."  What do I need to FIX???

    I want to share files from iMac to MacBookPro.  In "Sharing" setup I want to check "screen Sharing" but get the error message"Screen Sharing is currently being controlled by the Remote Management service."  What do I need to FIX???

    Care to share which OS you are using? 
    Have you read for possible solutions over in the "More Like This" thread over here?-----------------------> 

  • Install OEM 12c fails on "start oracle management service". win2008

    Windows Server 2008 R2 Enterprise SP1 x64
    Oracle Database 11g release 11.2.0.3.0
    I install OEM 12c(12.1.0.3) following this manual: Installing Enterprise Manager System
    before start i've installed WebLogic Server 10.3.6 and aplied 2 patches specified in this manual
    installation type is advanced, small, so i have created database from the appropriate template
    i also installed cygwin and started ssh-service
    the installation of OEM process fails on 73% "start oracle management service" with this message:
    INFO: oracle.sysman.top.oms:Starting OMS ...
    INFO: oracle.sysman.top.oms:Executing command: cmd /c set NEED_EXIT_CODE=1&&C:\Oracle\Middleware\oms\bin\emctl.bat start oms
    INFO: oracle.sysman.top.oms:Oracle Enterprise Manager Cloud Control 12c Release 3 
    INFO: oracle.sysman.top.oms:Copyright (c) 1996, 2013 Oracle Corporation.  All rights reserved.
    INFO: oracle.sysman.top.oms:Windows service OracleManagementServer_EMGC_OMS1_1 failed to be started
    INFO: oracle.sysman.top.oms:Oracle Management Server is Down
    INFO: oracle.sysman.top.oms:Please check C:/Oracle/gc_inst/em/EMGC_OMS1\sysman\log\emctl.log for error details
    SEVERE: oracle.sysman.top.oms:Starting of OMS failed.
    in C:/Oracle/gc_inst/em/EMGC_OMS1\sysman\log\emctl.log i got this:
    2013-09-06 12:24:27,012 [main] ERROR commands.BaseCommand logAndPrint.620 - Oracle Management Server Could Not Be Started
    Check EM Server log file for details: C:\Oracle\gc_inst\user_projects\domains\GCDomain\servers\EMGC_OMS1\logs\EMGC_OMS1.out
    2013-09-06 12:24:27,012 [main] INFO  commands.StartCommand startOMS.337 - startOMS finished with result: 1
    2013-09-06 12:24:30,974 [main] INFO  commands.StartCommand startOMS.371 - net start return code is 2
    2013-09-06 12:24:30,974 [main] ERROR commands.BaseCommand logAndPrint.620 - Windows service OracleManagementServer_EMGC_OMS1_1 failed to be started
    2013-09-06 12:24:34,094 [main] INFO  commands.BaseCommand printMessage.404 - statusOMS finished with result: 8
    2013-09-06 12:24:34,094 [main] ERROR commands.BaseCommand logAndPrint.620 - Please check C:/Oracle/gc_inst/em/EMGC_OMS1\sysman\log\emctl.log for error details
    and in C:\Oracle\gc_inst\user_projects\domains\GCDomain\servers\EMGC_OMS1\logs\EMGC_OMS1.out this:
    <06.09.2013 12:24:01 ICT> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with Java HotSpot(TM) 64-Bit Server VM Version 23.25-b01 from Oracle Corporation>
    <06.09.2013 12:24:01 ICT> <Info> <Management> <BEA-141107> <Version: WebLogic Server Temporary Patch for 13349651 Thu May 24 10:18:28 IST 2012
    WebLogic Server Temporary Patch for BUG14482558 Fri Jan 11 11:20:16 IST 2013
    WebLogic Server 10.3.6.0  Tue Nov 15 08:52:36 PST 2011 1441050 >
    <06.09.2013 12:24:03 ICT> <Info> <Security> <BEA-090065> <Getting boot identity from user.>
    Enter username to boot WebLogic server:Error: Failed to get value from Standard Input
    Enter password to boot WebLogic server:
    <06.09.2013 12:24:04 ICT> <Critical> <WebLogicServer> <BEA-000362> <Server failed. Reason:
    There are 1 nested errors:
    weblogic.management.ManagementException: Booting as admin server, but servername, EMGC_OMS1, does not match the admin server name, EMGC_ADMINSERVER
         at weblogic.management.provider.internal.RuntimeAccessService.start(RuntimeAccessService.java:67)
         at weblogic.t3.srvr.ServerServicesManager.startService(ServerServicesManager.java:461)
         at weblogic.t3.srvr.ServerServicesManager.startInStandbyState(ServerServicesManager.java:166)
         at weblogic.t3.srvr.T3Srvr.initializeStandby(T3Srvr.java:881)
         at weblogic.t3.srvr.T3Srvr.startup(T3Srvr.java:568)
         at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:469)
         at weblogic.Server.main(Server.java:71)
    >
    <06.09.2013 12:24:04 ICT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FAILED>
    wlst:
    wls:/offline>
    what I did wrong? how to start WLS server?

    Hi,
    First of all with EM 12.1.0.x any version you are not required to install wls separately, we have single installer for em and wls. Is there any specific reason you installer wls separately?
    Coming back to your issue: can you check
    %OMS_HOME%\BIN>emctl istart oms completes successfully.
    %OMS_HOME%\BIN>emctl istop oms completes successfully.
    Also open an SR with Oracle support and share the number. We should debug such issue through SR so that we can share logs and come find a root cause.

  • 'VTK-1000: Unable to connect to the Oracle Management Server

    Hello, I installed ORA 8.1.7 on Win2k, everything went smooth apart from I can't run OEM now, brings the following error:
    'VTK-1000: Unable to connect to the Oracle Management Server. Please verify that you have entered the correct host name and the status of the Oracle Management Server'
    I recall it was ok for NT, there was OracleOra817ManagementServer Service and now there is no any for Win2k..
    If you know any way I can make it up and running please help
    Thanks in advance
    Marina

    services: management server service started successfully.
    but OracleOra90Agent not yet started.
    the current scenario with my oem with login as management server has started with the user:sysman
    password:oem_temp
    still OracleOra90Agent has not started.
    inside oem server management,the discovery wizard is not cofiguring the nodes.
    kindly tell me, that is it due to the Agent, or SOMETHING ELSE.
    please do reply, thanks

  • Party Resource selected from the Assignment Manager is not available on SR

    Party Resource selected from the Assignment Manager is not available on Service Request.
    Hi,
    Im working on Oracle Customer Support and observed the following.
    I imported a party (dealer) from AR and created it as a resource.
    Then created a Service Request, assigned Tasks to the service request and then tried to assign the task to the imported resource using Assignment Manager.
    In the assignment manager searched for the resources using Unassisted search. In the resource type selected 'Party Resource'. Found the party resources by clicking on the search button.
    Double clicked on the party resource and specified the Start Time and End Time.
    After clicking on the Ok button, the selected party resource is not available in the Service Request Form.
    Can somebody please help me in this matter. I want the party resource on the service request form.
    Thanks in advance.
    Regards
    Anil

    Shiv,
    Thank you for your reply. I don't have access to the production instance..but I will definitely recommend the solution. I did these steps in test instances earlier whenever I had this error. But they used to go away after bouncing app server.
    Now, some of the functions are available to the responsibility without any modifications..seems like it takes a while for the newly added functions to a menu to propagate in the E-Business system.
    What confounds me is that even after a mid-tier bounce, the system didn't pickup the menu changes.
    Regards,
    Arun

  • Where do I find the "Node Manager" service?

    Can anyone tell me where to find the "Node Manager Service" In Call Manager 5.1.2 or IPCC 4.5?
    My db_CRA database in IPCC is not updating the real time ICD statistics table and Bug CSCsc09160 seems to indicate that stopping and starting the "Node Managers" may fix the issue.
    From the bug report:
    Symptom:
    Under the db_cra two tables (RtCSQsSummary and RtICDStatistics) are not updating. They stop updating concurrently with engine failovers and reboots. Only a hard reboot or a
    service failover brings them back into an active state.
    When the RtCSQsSummary and RtICDStatistics tables do update on the
    primary DB they do not update on the secondary DB and the data on them
    doesnt get refreshed.
    Conditions:
    stopping Node manager on node 1, data fails to be written to node 2. Then when we start NM back up on node 1 data is still not written to either data store
    Workaround:
    Not much as a workaround, because the solution requirs stop on both Node
    Managers and bring up node 1 first and the data starts writing to DB
    again.
    Thanks,
    Brian

    Post Author: jsanzone
    CA Forum: Authentication
    Sven,
    The reference to Session Manager is more of a concept of operations versus an entity.  The portion of code that you copied and pasted in your post is actually part of the verbiage used in an ASP script that BusinessObjects expects you to create in order for you to obtain your objective.  You can use this coding to create your own customized script or you might be able to search around on the web for a more complete solution.

  • Message (on one account) when logging in: The user account running the Configuration Manager console has insufficient permissions to read information from the Configuration Manager site database.

    After installing the reportservice/database i cannot use the Configuration Manager Console 2012 anymore with my own AD account. (The accounts of my colleagues are stil working)
    When i login i get the following message:
    The user account running the Configuration Manager console has insufficient permissions to read information from the Configuration Manager site database. The account must belong to a security role in Configuration Manager. The account must also have
    the Windows Server Distributed Component Object Model (DCOM) Remote Activation permission for the computer running the Configuration Manager site server and the SMS Provider.
    I checked the following:
    I am a administrative user in SCCM (Full Administrator)
    I am a member of the administrator group on the server
    Deleted HKEY_CURRENT_USER\Software\Microsoft\ConfigMgr10
    I tried to start it on multiple workstations and deleted my roaming profile
    Any more suggestions?

    Hi,
    Maybe you could have a look on the below blog.
    http://blog.nimbo.com/how-to-disable-user-account-control-in-windows-server-2012/
    (Note: Microsoft provides third-party contact information to help you find technical support. This contact information
    may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.)
    Best Regards,
    Joyce Li
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • The Web Management Service service terminated with service-specific error %%-2147483640,

    We've been able to successfully, automatically, deploy our MVC and WebApi to IIS7.5 on Win2008 R2, for some time now.  Just this week the MSDeploy stopped working.  The System event log shows this error when attempting to restart the Web Management
    Service on the targeted Win200 R2 server:
    The Web Management Service service terminated with service-specific  error %%-2147483640.
    The Application log shows this error at the same exact time the above error occurs.
    IISWMSVC_STARTUP_UNABLE_TO_ACTIVATE_HWC
    Failed to activate the Hostable Web Core (HWC). Web Management Service startup failed.  Please reference the Win32 error in this  event for further information.  Exception:System.Runtime.InteropServices.COMException (0x8007007F):  The
    specified procedure could not be found. (Exception from HRESULT:  0x8007007F)    at  System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal(Int32  errorCode, IntPtr errorInfo)    at  Microsoft.Web.Management.Server.WebServer.Microsoft.Web.Management.Server.Interop.IWebServer.Start() 
    Process:WMSvc User=NT AUTHORITY\LOCAL SERVICE
    The above error is preceded by this warning:
    A listener channel for protocol 'http' in worker process '7164' serving application pool 'WMSvcAppPool' reported a listener channel  failure.  The data field contains the error number.
    Which is preceded by this error:
    Failed to find the RegisterModule entrypoint in the module DLL C:\Windows\Microsoft.NET\Framework64\v4.0.30319\webengine.dll.  The  data is the error.
    We've attempted to reach the target server using https://ourservername:8172/MsDeploy.axd. The response is:
    Error 102 (net::ERR_CONNECTION_REFUSED): The server refused the  connection
    Is this occurring because the port is blocked or because the Web Management Service is not running?  (The Windows Firewall with Advanced Security dialog says the "Windows Firewall is off" and there are no entries in the firewall log (C:\Windows\System32\LogFiles\Firewall).
    We've seen some posts that indicate the certificate may be the issue. Not sure how to actually tell if this is the case though. The CERT we have says it is valid thru 2029.

    Hi Nicola,
    seems like your web service runtime is not configured correctly. Please check out the following SAP Notes:
    Note 1043195 - Configuration of the Web service runtime
    Note 1292171 - Troubleshooting Guide: ABAP Web Services Runtime
    Kind regards
    Heiko

  • Internal NT error when attempting to use the Oracle Management Server

    Our platform is:
    HP NetServer LC 2000
    1 GB Ram.
    CPU: x86 Family 6 Model 8 Stepping 8
    Windows NT 4.0
    Oracle 8.1.6
    Currently the database is working fine except the problems with
    the Oracle Management Server which will allow us to do a backup.
    The Management Server NT Service is giving an error
    called: "Error 2140 . An Internal NT Error Occurred" There is a
    Listener service running but I don't know if the settings are
    correct??

    Hello,
    I too am an Ashford University student, and I have received the same error. However, I have found a couple workarounds that allow me to do pretty much everything except view my degree progress (for that I use Chrome on my iMac).
    ****CAUTION: THE FOLLOWING PROCEDURE COULD RESULT IN LOSS OF DATA****
    First, back up your iPad in iTunes (if you do not know how to do this, then do not proceed until you do). Second, quit Safari (double-tap the home button so that the multi-task bar appears at the bottom of the screen, then swipe until you see Safari, then press and hold the Safari icon until the 'X' appears, finally press the 'X' to quit the App) Third, make sure Safari is configured as follows:
    Settings > Safari >
    Java Script "ENABLED"
    Block Popups "OFF"
    Accept Cookies "ALWAYS"
    Reset Safari:
    Settings > Safari >
    Clear History
    Clear Cookies
    Clear Cache
    Restart your iPad by holding the Home and Sleep buttons until the Apple Logo appears (immediately let go of both buttons or else you will put your iPad into recovery mode). Accessing the Ashford Student portal should now work.

  • Disable the Remote Management Service?

    I know this is "Why would anyone want to do this" question but we are having conflicting issues in one of our labs between NetSupport and Zenworks when trying to run Adobe Flash. NetSupport is a tool that quite a few of our lab teachers use, it gives them the ability to see all of there students screens, take control of them, and a few other features, all from a console that runs on the teacher machine.
    The problem comes in when running Flash if the student tries to create a text box and scroll inside of it then the computer crashes. We contacted NetSupport for help with this and they had us run a reporting tool that looked at the hardware setup and driver information. Then they setup a test machine and tried to replicate the problem and they were not able to. However they tech did note that in the scan of the machine there could be a conflicting issue between NetSupports Mirror Driver and DemoForge TightVNC Mirror Driver. I assumed the latter was part of Zenworks remote management. So we stopped the remote management service on a machine and tried to replicate the problem. We did not encounter the problem so we turned the remote management service back on and sure enough as soon as we tried to replicate the problem again the machine crashed.
    Now when we tried to disable the remote management service in the services menu but it will not stay disable as soon as the machine restarts the remote management service is running and its set to automatic again.
    Is there anyway to disable (preferable) or remove just the remote management piece with out removing the rest of the client from the machines?
    Thanks,
    Mike

    You can configure this in the ZCC for which components you want
    installed. You can deselect Remote Management.
    Note: You can also disable or remove the Mirror Driver from the Devices
    Control Panel under Display Drivers and it will not come back.
    On 1/13/2012 2:36 PM, mshicks wrote:
    >
    > I know this is "Why would anyone want to do this" question but we are
    > having conflicting issues in one of our labs between NetSupport and
    > Zenworks when trying to run Adobe Flash. NetSupport is a tool that quite
    > a few of our lab teachers use, it gives them the ability to see all of
    > there students screens, take control of them, and a few other features,
    > all from a console that runs on the teacher machine.
    >
    > The problem comes in when running Flash if the student tries to create
    > a text box and scroll inside of it then the computer crashes. We
    > contacted NetSupport for help with this and they had us run a reporting
    > tool that looked at the hardware setup and driver information. Then they
    > setup a test machine and tried to replicate the problem and they were
    > not able to. However they tech did note that in the scan of the machine
    > there could be a conflicting issue between NetSupports Mirror Driver and
    > DemoForge TightVNC Mirror Driver. I assumed the latter was part of
    > Zenworks remote management. So we stopped the remote management service
    > on a machine and tried to replicate the problem. We did not encounter
    > the problem so we turned the remote management service back on and sure
    > enough as soon as we tried to replicate the problem again the machine
    > crashed.
    >
    > Now when we tried to disable the remote management service in the
    > services menu but it will not stay disable as soon as the machine
    > restarts the remote management service is running and its set to
    > automatic again.
    >
    > Is there anyway to disable (preferable) or remove just the remote
    > management piece with out removing the rest of the client from the
    > machines?
    >
    > Thanks,
    > Mike
    >
    >
    Craig Wilson - MCNE, MCSE, CCNA
    Novell Knowledge Partner
    Novell does not officially monitor these forums.
    Suggestions/Opinions/Statements made by me are solely my own.
    These thoughts may not be shared by either Novell or any rational human.

  • BAM Server stopped working - Cannot connect to the Oracle BAM services

    Hi,
    On logging into the OracleBAM page, I get Error 500 - Internal Server Error.
    Caused by: java.lang.reflect.InvocationTargetException
    Caused by: oracle.bam.common.remoting.ServiceUnavailableException: BAM-00223: Service "interface oracle.bam.adc.common.core.IDataStore" is unavailable.
    Caused by: oracle.bam.adc.api.exceptions.ServerUnavailableException: BAM-01261: Cannot connect to the Oracle BAM services.
    In the server startup log I find the following error before the server state changed to RUNNING
    BAM-01324: Unable to establish BAM administrator account.
    java.lang.Exception: BAM administrator account OracleSystemUser does not have administrator privileges.
    How do I fix this? Help Please!
    Also, is there a way to bring my BAM installation back to its vanilla state? Maybe run the Repository Creation Utility once more? Are there any files on the server that has to be cleaned?
    Thanks
    Alosh

    Hello SOA gurus,
    We're getting the same error as well. Our's a Linux environment and we've configured 2 managed servers (soa_server and bam_server)
    Log file for the bam_server throws up this error message periodically. Looks like the other server doesn't. Does this message pertain to only BAM server ? (I'm new to SOA suite).
    Also, is this a show stopper ? I've seen the managed server going down at times and wasn't sure if it was due to this error. Don't know if this error can be ignored or need to fix.
    Can someone help on how to fix this really soon please ?
    Thanks
    Muthu

Maybe you are looking for