The Web Management Service service terminated with service-specific error %%-2147483640,

We've been able to successfully, automatically, deploy our MVC and WebApi to IIS7.5 on Win2008 R2, for some time now. Just this week the MSDeploy stopped working. The System event log shows this error when attempting to restart the Web Management
Service on the targeted Win200 R2 server:
The Web Management Service service terminated with service-specific error %%-2147483640.
The Application log shows this error at the same exact time the above error occurs.
IISWMSVC_STARTUP_UNABLE_TO_ACTIVATE_HWC
Failed to activate the Hostable Web Core (HWC). Web Management Service startup failed. Please reference the Win32 error in this event for further information. Exception:System.Runtime.InteropServices.COMException (0x8007007F): The
specified procedure could not be found. (Exception from HRESULT: 0x8007007F) at System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal(Int32 errorCode, IntPtr errorInfo) at Microsoft.Web.Management.Server.WebServer.Microsoft.Web.Management.Server.Interop.IWebServer.Start()
Process:WMSvc User=NT AUTHORITY\LOCAL SERVICE
The above error is preceded by this warning:
A listener channel for protocol 'http' in worker process '7164' serving application pool 'WMSvcAppPool' reported a listener channel failure. The data field contains the error number.
Which is preceded by this error:
Failed to find the RegisterModule entrypoint in the module DLL C:\Windows\Microsoft.NET\Framework64\v4.0.30319\webengine.dll. The data is the error.
We've attempted to reach the target server using https://ourservername:8172/MsDeploy.axd. The response is:
Error 102 (net::ERR_CONNECTION_REFUSED): The server refused the connection
Is this occurring because the port is blocked or because the Web Management Service is not running? (The Windows Firewall with Advanced Security dialog says the "Windows Firewall is off" and there are no entries in the firewall log (C:\Windows\System32\LogFiles\Firewall).
We've seen some posts that indicate the certificate may be the issue. Not sure how to actually tell if this is the case though. The CERT we have says it is valid thru 2029.

Hi Nicola,
seems like your web service runtime is not configured correctly. Please check out the following SAP Notes:
Note 1043195 - Configuration of the Web service runtime
Note 1292171 - Troubleshooting Guide: ABAP Web Services Runtime
Kind regards
Heiko

Similar Messages

The Lync Server Front-End service terminated with service-specific error %%-1008124893.

Hello, everyone
I've installed Lync Server 2010. There was no error during installation. But when i start Lync Server Front End Server, i'm getting following error:
The Lync Server Front-End service terminated with service-specific error %%-1008124893.
In event viewer:
The evaluation period for Microsoft Lync Server 2010 has expired. Please upgrade from the evaluation version to the fully licensed version of the product. Look at help for Setup.exe to learn how to upgrade from evaluation version to the licensed version.
Cause: The evaluation period for Microsoft Lync Server 2010 has expired.
I've upgraded Lync Server according to http://technet.microsoft.com/en-us/library/gg521005.aspx?ppud=4
Also I've installed all Lync Server updates.
But I still could not start Lync Front End Sever. How can I solve this problem?
Thanks

Hi,
Can you try to run
start-cswindowsservice -report c:\report.html
and post the report so we can have more information about your problem ?
Regards,
Adrian TUPPER - ABC Systemes - http://thelyncexperience.blog.com/ If answer is helpful, please hit the green arrow on the left, or mark as answer Thank you

How to resolve error 'The DPMRA service terminated with service-specific error Only one usage of each socket address (protocol/network address/port) is normally permitted'

One of my exchange 2010 servers dpm agent is give the following error when the dpmra service attempts to start.
The DPMRA service terminated with service-specific error Only one usage of each socket address (protocol/network address/port) is normally permitted..
I have tried uninstalling/reinstalling the agent but this does not resolve the issue
Any help would be greatly appreciated.
Thanks
William Hickson

Hi
Something has probably changed on the protected server side that affects the DPM agent. In some cases the DCOM configuration could change. Look at this blogpost and verify your DPMRA DCOM object.
http://robertanddpm.blogspot.com/2010/08/dpm-ra-rights.html
If this doesn't do the trick try reinstall the agent.
Best Regards
Robert Hedblom
MVP DPM
Check out my DPM blog @ http://robertanddpm.blogspot.com

SQL Server VSS Writer terminated with service-specific error 2147549183 (0x8000FFFF)

Hi Team,
SQL VSS Writer service terminated with service-specific error,
find SC query results, please advice wat;s the issue. Kindly note this service running fine for long time and suddenly stopped.
SERVICE_NAME: SQLWriter
        TYPE               : 10 WIN32_OWN_PROCESS
        STATE              : 1 STOPPED
                                (NOT_STOPPABLE, NOT_PAUSABLE, IGNORES_SHUTDOWN))
WIN32_EXIT_CODE    : 1066 (0x42a)
        SERVICE_EXIT_CODE : -2147418113 (0x8000ffff)
        CHECKPOINT         : 0x0
        WAIT_HINT          : 0x0
Regards,
Karthik
Thanks & Regards, Karthikeyan

this is part of a log error for example:
24 Info 2011/09/26 23:00 [Start SQL VSS Comman]
(NOT_STOPPABLE, NOT_PAUSABLE, IGNORES_SHUTDOWN)
25 Info 2011/09/26 23:00 [Start SQL VSS Comman] WIN32_EXIT_CODE : 0 (0x0)
26 Info 2011/09/26 23:00 [Start SQL VSS Comman] SERVICE_EXIT_CODE : 0 (0x0)
27 Info 2011/09/26 23:00 [Start SQL VSS Comman] CHECKPOINT : 0x0
28 Info 2011/09/26 23:00 [Start SQL VSS Comman] WAIT_HINT : 0x7d0
29 Info 2011/09/26 23:00 [Start SQL VSS Comman] PID : 15532
30 Info 2011/09/26 23:00 [Start SQL VSS Comman] FLAGS :
31 Info 2011/09/26 23:00 Klaar met uitvoeren post-opdrachten
32 Error 2011/09/26 23:00 The writer vetoed the shadow copy creation process during the
backup preparation state. (VSS_WS_FAILED_AT_PREPARE_BACKUP)
33 Info 2011/09/26 23:00 Verwijderen tijdelijk bestand C:\Users\serveradmin\.temp\
1313680495583
34 Error 2011/09/26 23:00 Backup voltooid met fout(en)
This is what I look for usually from this log:
32 Error 2011/09/26 23:00 The writer vetoed the shadow copy creation process during the
backup preparation state. (VSS_WS_FAILED_AT_PREPARE_BACKUP)
Just post all the log messages if you can.
[Personal Site] [Blog] [Facebook]

Workflow Manager 1.0 Refresh with Service Bus 1.1 Error

Hi I have installed and configured Workflow Manager 1.0 Refresh with Service Bus 1.1.
I didn't face any errors while installing or configuring the SB 1.1 and WFM 1.0.
I used the Workflow Configuration Wizard to configure the SB 1.1 and WFM 1.0 instances.
I have some workflows where I have custom code activities that put messages into the topic or pull messages from the topic.
I'm able publish these WFs to the scope as well.
However, when I try to execute these workflows, it throws up the following error:
Could not load file or assembly 'Microsoft.ServiceBus, Version=2.1.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' or one of its dependencies. The located assembly's manifest definition does not match the assembly reference. (Exception from HRESULT:
0x80131040)
I checked the ServiceBus dll version that is present in the WF Artificats and WFWebroot/Bin folders and find that the versions of this dll in both the folders is: 2.0.40131.0 (the version of the dll in the Service Bus folder is 2.1.30904.0).
How do I get the WFM to load the latest SB 1.1 dll?

What is the account used to install Workflow in Staging and Dev environment
I assume that Workflow in Staging might be installed with different account that can cause issue
Also check ULS log and Event log on Workflow manager server and sharepoint server when workflow does not execute
I assume it is working on DEV so I dont trust DEV environment. Try the same setup on a different machine(Preferred new).
Also check server level permission for the account like if working and non working account can access system drive.
If this helped you resolve your issue, please mark it Answered

The selected signed file could not be authenticated. The file might have been tampered with or an error might have occured during download. Please verify the MD5 hash value against the Cisco Systems web site

I am trying to load any 9.0.3 firmware on my UCM 5.0.4.2000-1 server. Every newer firmware I load throws the following error. I have verified the MD5 is correct and also downloaded the file several times with the same result. I can load the same firmware file on another UCM server and it loads fine. Any ideas?
Thanks in advance!
Error Message:
The selected signed file could not be authenticated. The file might have been tampered with or an error might have occured during download. Please verify the MD5 hash value against the Cisco Systems web site: 9b:b6:31:09:18:15:e7:c0:97:9f:e6:fe:9a:19:94:99
Firmware File: cmterm-7970_7971-sccp.9-0-3.cop.sgn
UCM version: 5.0.4.2000-1

Thanks for your reply. We have a lab environment where I maintain UCM 5.0, 5.1, 6.0, 6.1, 7.0, 7.1 and 8.0 servers each running the latest released firmware for our QA testing team. I have downloaded and installed the latest device packages but find that if I try to install any firmware newer then 8.3.1 on either 5.0.4 or 6.0 i start getting MD5 hash authentication errors. It looks like 9.0.3 firmware should work on UCM 5.0 and 6.0 so I am lost as to why I can't seem to update any firmware for any model phone if it is newer then version 8.3.1 on either 5.0 or 6.0. while 5.1 and 6.1 work without issues. Maybe it is just a bug. I mostly wanted to see if anyone else has experienced this or if it is just me.

I have the curve but was never able to open the download manager disc that came with the phone. i have a mac computer. i do not have the internet on my phone. i would like to backup my phone book. thankyou, joan

i have the curve but was never able to open the download manager disc that came with the phone. i have a mac computer. i do not have the internet on my phone. i would like to backup my phone book. thankyou, joan

Unfortunately I lost my life and am trying to rebuild. Isn't the technical era great.
Backup, backup, backup
As a minimum, use 3-2-1 (or even more)
3 copies of your data (original copy counts as 1)
2 different backup utilities/storage formats (protects from bugs in the software)
1 copy off-site (protects against theft, fire, and natural disaster)
More backup copies are even better.
Backup disks are cheap compared to the lost of personal data that does not exist anywhere else.

DTP run Time Error : Dump: Internal session terminated with a runtime error

Hi Experts,
I'm facing a problem during loading data from PSA to DSO from DTP. It gives Dump: "Internal session terminated with a runtime error".
When i went to PSA and see the no. of data packages, it is 1532.
Could anybody please help me how to load the data.
Thanks
Ajay

Thanks Srini!!
the load is running for 15 min and then it is throwing dump without a single package extract.
Ok...the same I'm also thinking to selective upload but can you please explain me how do i do that as it has only request in PSA.
and it is a pricing data.
Thanks
Ajay

Internal session terminated with a runtime error(ITAB_DUPLICATE_KEY)

Hi All,
Process Chain is failing While loading data from ODS to Cube iam getting error in DTP level internal session terminated with a runtime error(ITAB_DUPLICATE_KEY).Here my source is CRM.
Can you please suggest me for this issue.
Thanks,
Mahes.

hi Maheesh,
Runtime Error ITAB_DUPLICATE _KEY is resulted because of Duplicate Transfer Structures from different Logical Systems.
You can find the corresponding entries in the table RSISOSMAP ..On executing,we have the option to give the InfoSource name(ISOURCE) for wich the data load got failed with Runtime Error ITAB_DUPLICATE_KEY..
You can coreect this error by running the Program RSAR_RSISOSMAP_REPAIR in repair mode , the program first checks the RSISOSMAP table and corrects any incorrect entries found. A log is then written for the mappings that were corrected.
This will solve your problem.
Please refer to link mention in above thread for more detail i have just summarize the things :
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/a04c82eb-ec7c-2c10-7fae-ca6e764c483a?QuickLink=index&overridelayout=true
Thanks,
Deepak

Office 2011 for the mac, want to export contacts with a specific catewgory so I can produce a specific report

office 2011 for the mac, want to export contacts with a specific catewgory so I can produce a specific report, I can do this by selecting a tab delimited file format & shows up as .olm but I can'y open this file or import to another application, any suggestions?

http://answers.microsoft.com/en-us/mac

Firefox Mobile 4 beta 3 (and pre-beta 4) fails to install on Archos 101 Tablet using Android 2.1 Eclair with no specific error.

Firefox Mobile 4 beta 3 (and pre-beta 4) fails to install on Archos 101 Tablet using Android 2.1 Eclair with no specific error. Is this a know issue or has someone been able to successfully install?

Sorry, we haven't tested Firefox on this device yet, and we aren't sure why it isn't working. If anyone (especially with Android development experience) would like to help us debug this problem, please start by creating an account and submitting a bug report at: https://bugzilla.mozilla.org/
Thanks for the report.

Diadem 11 crashed when using AOP5 plugin with no specific error

We have a ASAM-ODS database and are running a Avalon v4.2e server. DIAdem data TDM file is uploaded using openMDM client.
We have installed AOP5 plugin on 2 systems running DIAdem 11 to access the data directly from the ASAM-ODS database. On one machine it is working fine.
On the second machine with the same parameters, when we try to connect, DIAdem hangs and then crashes with no specific error in the log file. DIAdem is not able to refresh the Navigator window and show the data stored in the ASAM-ODS server. The relevant errors are attached and also the log file of the plugin.
How do we debug and resolve the issue? Any pointers would be welcome. We are using aop5dataplugin2_0_1.exe downloaded from the NI site.
Regards,
Shailesh
Attachments:
Error_1.JPG ‏83 KB
Error_2.JPG ‏49 KB
MDM AOP5 plugin.log ‏783 KB

Hi Shailesh,
Is it possible that the computer this worked on has had a newer version of DIAdem or LabVIEW or DataFinder on it? All three of those NI software packages share a layer called USI, which is what the DataPlugins "plug into". The USI layer only upgrades, so even if you installed a DIAdem 2012 evaluation version and then uninstalled it, you would keep the USI version from DIAdem 2012, and your DIAdem 11.0 would use that newer USI version. It is possible that the latest AOP5 DataPlugin is not compatible with 11.0, which was released nearly 5 years ago. I can look into that and get back to you.
Alternatively, DIAdem 11.0 may be struggling to work with a USI version from LabVIEW 2012 or DIAdem 2012. We do regression testing every release with multiple older DIAdem versions, but at some point the newer features don't work with the older software.
Brad

OracleDiscoverer4i service terminated with service-specific error 6.

Hai Friends..
Tried installing 9iAS 1.0.2.1.0 on NT. When I tried to start the Discoverer4i service got this error. When i am running Discover Viewer it is saying that Communication error or ORB internal error.
I wouid appreciate any help.
Cheers
Gopi
null

Navigate to the drive:\%oracle_home%\DISCWB33 directory in a DOS prompt. Type in dis33ws. This executable should run. It will give you output similar to this:
D:\orant\DISCWB33>dis33ws
Setting up the Operation Mode and Application Name
Session name: OracleDiscovererSession
Preference name: OracleDiscovererPreferences
Setting the creator of DCSThreadMonitor
Registering SessionManager
Error binding to Preference Repository
Starting the memory manager
Session Manager destructor called (or some other message)or Wakeup if configured properly
This is normal since we are not passing any parameters to the executable as the batch
files or services would. The point here is to see if the executable responds and runs.
If the executable does not run, then the likely cause is corrupt or missing .dlls.
In this case you would need to reinstall Discoverer.
Example of one particular resolution:
Ran dis33ws and received an ODBC error indicating a .dll problem exists.
Reinstalled Service Pack 6a (SP6a) and Microsoft Data Access Component 2.5
(MDAC). Re-ran dis33ws and received proper resonponse above.
Brought up Discoverer via the portal page with no error.
Christopher

Service Ticket SLA with Service Agreement

hi experts,
we have a requirment where we need to create service tickets with reference to service agreement. As per the doucmentation, service agreements can be created based on sold to party BP or BP type. We are planning to use with BP Type as we dont want to maintain at every BP level. Now the issue is, i dont have sales org data maintained at all sold-to party level. we have thousands of existing customers and maintaining their sales area data now is gonig to be difficult task.
Is there any alternate way to create Service ticket with reference SLA? is it possbile to determine SLA information purely based on BP type and organization info provided in service agreement (without going to sales area of the corresponding BP)
another question: if i create a copy of standard OAS service agreement and remove the org determination for sales org, will it work? Does the SLA determination still happens from service ticket?
i dont think service contracts work in thsi scenario either.
any details steps in this aspect would be greatly appriciated and rewared.
Thank you
Raghavendra

Hello,
only a small hind which is maybe interesting:
If you use service request instead of service ticket you will be able to use a SLA determination procedure in the customizing of servicerequest.
This is quiet usefull - we changed from ticket to servicerequest.
Best regards
Manfred
Edited by: ManniF on Mar 30, 2010 4:58 PM

Digest-service spamming console with digest-request errors

I, like many, have been having all sorts of problems with 10.9 server and Windows clients at work in a mixed-client network. Unlike a lot of people, so far 10.9.2 seems to have resolved most if not all of my users' issues. The server is used for File Sharing, Websites, and Software Update only.
However, my server has, since upgrading to Mavericks, been getting a weird set of digest-service errors every 10 seconds. I had assumed these were connected to the smbd crashes, but after the 10.9.2 update and so far having no issues with it the messages continue unabated. A few other people on the forums here have mentioned seeing similar messages, but nothing suggested has helped.
The chunk of errors looks like this, repeating every 10 seconds (on suspiciously regular clock multiples of 10 seconds, in fact):
3/20/14 5:26:30.394 PM digest-service[30240]: digest-request: uid=0
3/20/14 5:26:30.394 PM digest-service[30240]: digest-request: init request
3/20/14 5:26:30.399 PM digest-service[30240]: digest-request: init return domain: SERC-SERVER server: SERC-SERVER indomain was: 3/20/14 5:26:30.401 PM digest-service[30240]: digest-request: uid=0
3/20/14 5:26:30.401 PM digest-service[30240]: digest-request: init request
3/20/14 5:26:30.404 PM digest-service[30240]: digest-request: init return domain: SERC-SERVER server: SERC-SERVER indomain was: 3/20/14 5:26:30.405 PM digest-service[30240]: digest-request: uid=0
3/20/14 5:26:30.405 PM digest-service[30240]: digest-request: init request
3/20/14 5:26:30.408 PM digest-service[30240]: digest-request: init return domain: SERC-SERVER server: SERC-SERVER indomain was: 3/20/14 5:26:30.409 PM digest-service[30240]: digest-request: uid=0
3/20/14 5:26:30.410 PM digest-service[30240]: digest-request: od failed with 2 proto=lm
3/20/14 5:26:30.410 PM digest-service[30240]: digest-request: user=\
3/20/14 5:26:30.410 PM digest-service[30240]: digest-request: kdc failed with 22 proto=unknown
3/20/14 5:26:30.410 PM digest-service[30240]: digest-request guest: ok user=SERC-SERVER\GUEST proto=lm flags: NEG_KEYEX, ENC_128, NEG_VERSION, NEG_TARGET_INFO, NEG_NTLM2, NEG_ALWAYS_SIGN, NEG_ANONYMOUS, NEG_NTLM, NEG_SIGN, NEG_TARGET, NEG_UNICODE
3/20/14 5:26:34.346 PM AppleFileServer[534]: _Assert: /SourceCache/afpserver/afpserver-644.90.3/afpserver/FPCarbonVol.cpp, 71 (-35)
Note that the AppleFileServer error at the bottom also repeats every 10 seconds, but is offset from the digest-service errors by 6 seconds, so I'm not sure if it's related or a separate issue.
I have thus far tried configuring then disabling OpenDirectory (we don't use it, and it had not previously been configured), deleting and regenerating "/Library/Preferences/com.apple.security.systemidentities.plist" by running "sudo /usr/libexec/configureLocalKDC", disabling and re-enabling services, disabling guest access, re-setting the host and computer names, and generic voodoo like permissions repair.
Any suggestions for what might be causing these errors, and/or what I might try to prevent them?

Hi all
we do have the same issue and do not find any hint what cuases the problem.
running 10.9.2 with apple server 3.1.1 on a macpro of 2011 we do get the same messages in the logfile.
Every 10 seconds we get:
AppleFileServer[424]: _Assert: /SourceCache/afpserver/afpserver-644.90.3/afpserver/FPCarbonVol.cpp, 71 (-35)
We also have an issue on mac clients running 10.9.2:
If we do not use the client for about 30 minutes (does not necessarily go to sleepmode) and we turn back to the desktop we will not see the afp connection to the server for about 30 seconds. After this we are able to see the file server again. This delay is very anoying.
In the logfile on the the server we see at this very monment the following messages:
08.05.14 08:19:40,013 digest-service[2706]: digest-request: uid=0
08.05.14 08:19:40,038 digest-service[2706]: digest-request: netr probe 0
08.05.14 08:19:40,039 digest-service[2706]: digest-request: init request
08.05.14 08:19:40,210 digest-service[2706]: digest-request: init return domain: SERVER server: SERVER indomain was: <NULL>
08.05.14 08:19:40,210 digest-service[2706]: digest-request: uid=0
08.05.14 08:19:40,210 digest-service[2706]: digest-request: init request
08.05.14 08:19:40,257 digest-service[2706]: digest-request: init return domain: SERVER server: SERVER indomain was: <NULL>
08.05.14 08:19:47,751 digest-service[2706]: digest-request: uid=0
08.05.14 08:19:47,751 digest-service[2706]: digest-request: init request
08.05.14 08:19:47,798 digest-service[2706]: digest-request: init return domain: SERVER server: SERVER indomain was: <NULL>
08.05.14 08:19:47,809 digest-service[2706]: digest-request: uid=0
08.05.14 08:19:47,809 digest-service[2706]: digest-request: init request
08.05.14 08:19:47,999 digest-service[2706]: digest-request: init return domain: SERVER server: SERVER indomain was: <NULL>
08.05.14 08:19:48,000 digest-service[2706]: digest-request: uid=0
08.05.14 08:19:48,001 digest-service[2706]: digest-request: od failed with 2 proto=ntlmv2
08.05.14 08:19:48,001 digest-service[2706]: digest-request: user=\ladmin
08.05.14 08:19:48,004 digest-service[2706]: digest-request kdc: ok user=SERVER\ladmin proto=ntlmv2 flags: NEG_KEYEX, ENC_128, NEG_VERSION, NEG_TARGET_INFO, NEG_NTLM2, NEG_ALWAYS_SIGN, NEG_NTLM, NEG_SIGN, NEG_TARGET, NEG_UNICODE
Right know I do not have a clue what to do to resolve this issue.
Any help or hint is appreciated.
Thanks
Thomas

The Web Management Service service terminated with service-specific error %%-2147483640,

Similar Messages

Maybe you are looking for