Component Price Change before CK11N for Std Cost Estimate-Mat(ppc1)

Hello CO Gurus ,
When I am running std. costing (ck11n) for a fert material it is giving price by exploding its bom( adding component prices).
I want to take one of its component price by taking 125% .( i.e. in the master (account view )of component price is Rs.100, I want to take its price as Rs.125 without increasing its quantity and then add the total price of fert material. There is a tab 'costing relevancy' in bom component component, I am clicking 125% costing rel. indicator, but it is taking master Std price not 125% of this Std price.
How to increase the component price more than specified in its master?
Your answer will be appreciated
Regards
Jia

Hi,
There is what can I suggest.
Create new costing variant with valuation variant that takes for example planned price 3 into account when running ck11n. Then put the new price for the material in planned price 3 field in costing view 2. This way you can recalculate cost with different prices for components without changing BOMs and Standard prices.

Similar Messages

Table -- log detail for std cost estimate material

Dear experts,
In which table the standard cost estimate log details will be stored? for ex: warning / error messages
Our client wants to develop customized ALV report for to show consolidate list (instead to check 1 by 1).
plz help me.
Regards
Sankaran

Hi,
Please use Table CMFK and CMFP for this.
Thanks,
Pawan Kumar

FG Valuation basis - Std Cost estimate or Net sale value whichever is less

Dear SAP Experts,
Query 1 -
Valuation of Finished goods is done on basis of standard cost estimate (CK24) or Net sale value whichever is less
*Net sale value u2013 Net sales ( Sales value minus Sales deductions)
Eg : Std cost estimate gives FG price as $100, whereas Net sale value price of FG $80,
      now the client wants FG values should be at $80
Is there any standard way, wherein SAP can capture whichever is less i.e standard cost estimate vs Net Sale Value
Pl let us know the options and which options would be ideal for query 1
Query 2 u2013 Can we use CRK1 and MR21 to manually change FG price whenever Net sale value is less than std cost estmate price?
u2022     In case the market value is less than the std cost estimate (CK11n) ,then Is this the approach to manually value FG price using CRK1 & MR21.
u2022     What could be the impacts if we follow this approach
For Eg: Impact on prev months WIP, Scrap, stock returns etc
u2022     We simulated CRK1 & MR21 and MR21 entries are posted successfully, however following below warning is the message is showed when CRK1 is executed
             Note u2013 Material Ledger is not active
Warning Message
Deleting current standard cost estimates can cause inconsistencies. Your comments please
Message no. CK669
Diagnosis
u2022     If you delete a current standard cost estimate, the fields for the cost estimate are set to zero in the material master record. If you use the material ledger, the standard prices in the material ledger master data are also deleted when you delete the current standard cost estimate. The material master record for the material thus does no longer contains a current standard price from a standard cost estimate.
u2022     If you delete an active standard cost estimate, you can no longer determine scrap, work in process and variations for previous periods.
u2022     In certain countries, it is a legal requirement to maintain records of standard pricing. Therefore, you should check whether you are obliged by law to keep records of your standard cost estimates. Please also contact the relevant accounting and inventory management departments.

Dear,
Query 1;
The FG or SFG will be valuated at Standard Cost there is no provision to enter Net sale value
Query 2:
Do not user CKR1 to delete Cost Estimate because it can bring lot of Descripenceies in CO, SAP do not recommend the same.
You can run the revaluation at the month end or revise your activity rates so that you standard price will be change accordingly and your inventory will be re valuated.
Hope it is clear, it not then please revert.
Br,Vivek

We cannot do std cost estimate every month in ML

HI
Can we do std cost estimate whenever required with changed price,
can i change the price in material master -how
regards
sowmya

Hi,
We can do std cost estimate once in a month. If we want to do multiple times in a month we should reorganise the material cost estimate using CKR1.
We can change the material master price for a material with out standard cost estimate using MR21.
If standard cost estimate exist, use CKR1, the use MR21.
Regards,
Rijo Paul

Std. cost estimate

Dear Experts,
We have ROH, HALB & ZMAT as materials. The question is with respect std. cost estimate.
The cost estimate are run for HALB & ZMAT items created on day to day basis. However cost estimate is executed for all the HALB & ZMAT on alternate months.
I would lke to know the best practice or industry standard on this issue on the frequency of estimates. I appreciate any other points rellated to this point.
Thanks in advance.
T.S.Shankar

hi read the following basics of CO-PC
1)A material cost estimate used to calculate the standard price in the
material master record.
2)The cost estimate must be executed with a costing variant that updates
the material master, and the cost estimate must be released.
3)Forms the basis for profit planning or product costing where the focus
is on determining the variances.
4)Typicall, a standard cost estimate is created for each product at the
beginning of the fiscal year or new season or BEGINING OF THE PERIOD / MONTH.
5)Standard cost estimates establish standard prices for semifinished
products and finished products. The costs calculated in standard cost
estimates are used to valuate materials with standard price control.
A costing type that calculates the cost of goods manufactured for a
product during the course of a planning period.
It differs from the standard cost estimate in that it uses the quantity
structure that has changed during the planning period as the basis for
calculating costs.   ( WHEN EVR YOUR PLANNING WILL BE CHANGED    )
CURRENT COST ESTIMATE
1)A cost estimate that can be created at any time to valuate the current
quantity structure with the current prices.
This cost estimate serves the following purposes:
A) You can compare its results with the results of the standard cost
     estimate to support decision-making in production.
B)You can transfer the results of this cost estimate to the material
     master and use them to valuate the goods receipt when working with
     materials that use the moving average price.
Regards
Mala K Reddy

Ck11n create a cost estimate

Hi guys
Could you provide the solution please.
SAP P01 Transaction code <b>CK11N create a cost estimate doesn'tt use the planning exchange rate for inter company purchased items
Client a dev d2 16 example of it part f00008537012, plant CA12 this is using the M rate instead of the P rate
Regards,
Prudhvi

You might be using special procurement key for the component in the BOM, which is sourced from inter-company.
During the calculation of the cost estimate of the material, the system reads the price from the cost estimate of the component in the supplying plant. The priority of the future, current or previous cost estimates are set up in the transfer strategy (or transfer control) for cross-plant (t-code OKKM).
What are the currencies involved in your case?

CK11N, release new costing estimate

Hello all experts,
Please help me on the following question, thank you!!
For example: Product A, it has a standard cost estimate which is released on 01.01.2010, it's costing date from is 01.01.2010 and costing end date is 31.12.2010. In the middle of the year, for example in May, the exchage rate was change a lot, so we want to release a new cost estimate for it. The costing start date is 01.05.2010 and costing end date is 31.12.2010.
My question is: Is it possible for me to do so directly in CK11N and then mark and release it in CK24?
Thank you very much!!!
Mavis

Dear,
The Standard Cost Estimate/Costing Run will be executed only in Company Code Currency i.e., Local Currency. Exchange rate differences will happen only during execution of Actual Postings.
For example : Goods Receipt of 100 units @ $ value of Rs. 45.
Finished Goods Account   DR      4500
GR/IR Clearing Account    CR       4500
Invoice Receipt/Invoice Verification -MIRO:
Invoice Receipt 100 units @ $ Value of Rs.48
If the stock is available, the Inventory/Stock Value will be revaluated with the new price. If the stock is not available the Exchange difference will be posted to Exchange Gain/Loss Account based on OBYC settings, like this.
Exchange Gain/Loss A/c     DR     300
GR/IR clearing A/c               DR   4500
Vendor A/c                            CR   4800
If you want to update the Material Master with new Standard Price, you need to Reorganize existing Cost Estimate through t-code CKR1 and re-run t-codes CK11N and CK24 for Mark and Release the new price.
Regards
appalas
Edited by: appalas on Jan 27, 2010 7:07 AM

Can we use two costing variant for standard cost estimate

Hi,
Can we use two costing variant for standard cost estimate of two different materials in the same period ? e.g. Costing variant Z001 for Material code 1000 and Costing Variant Z002 for Material code 2000.
Here the system is not allowing to change the costing variant in Marking Allowance (t code CK24) for marking and release of Material cost 2000 if the standard cost for Material code 1000 is already marked and released.
Thanks,
Bijay

For a material in a period only one price can be released. Though you cn have two separate costing variants and then calculate standard estimate with that. U can release based on one variant only for a month. Or use MR21 and update the price as per the other variant
Thanks and Regards

How to include ED in Std.cost estimate

Dear all
My client want to add ED to Std. cost estimate in receiving plant(Depot). I have acheived this by way of additive cost estimate manually. but my client wants that system could pick up the Ed from SD where ED is maintained SKU wise.
At recieving plant(Depot) the std.cost estimate is like this
Std cost from production Plant
ED from SD
Freight ( certain % on ( St.cost+ED)
Std cost at depot
Is it possible to get above scenerio?
Pl help me out
Regards
SPSankaram

HI
Standard formula for workcenter costing is SAP008 , you have to specify in the costing and capacity tab , whereas for scheduling specify SAP004
then try creating the order
regards
thyagarajan

Template allocation for standard cost estimate

Hi Guys
Can you please explain me how template function is triggered when we run a std cost estimate? What is the link between two?
Thanks in Advance
Regards
Sejar

Hi
Costing template is generally used for Activity Based Costing,
Please check the following SAP help page for more information
http://help.sap.com/saphelp_46c/helpdata/EN/c5/b02e8d1a3911d2a57a0060087d1f3b/content.htm
Regards
Sachin

Display Dept. amount in Std cost estimate cost component view

Dears,
During implementation of Repetitive manufacturing, my customer Requirement is to have 4 activity types:
1- Utilities : (Elect-water-GAS ... Etc)
2- Labor : (salary - bonus ..Etc)
3- Depreciation : (Depreciation exp)
4- other : like (maintenance .. Etc)
he wants that so he can know this classification of the above costs liek depreciation per material in the standard cost estimate so my question is:
Is it applicable to display the above requirement and using only 2 activity types
Labour and machine
and use the cost component structure to display the above req ?
as an example:
in CK11N : if i switch to cost component view to display the depreciation amount and Etc
Thanks and best Regards,
Ahmed Samir

Salaam Ahmad
You have both choices.
You can go with 4 act types or go with 2 and use costing sheet for the other costs
I will prefer 4 act types
Br. Ajay M

Price change before reverse document

I have a delivery document, suppose it when do vl01n, the cost will be inject into account document for the cost, may be MAV price. I would like to know, if i update the price using MR21, then reverse document. the document will use the new price or the old price. Thanks!

It is also important to know at what date you are performing MR21. If its current date then its ok. If its past date then there will be automatically reversal of MR21.

PO price changes before the complete delivery

I have an issue..... we have ordered a certain material say 2000 pcs to be delivered over 6 months of time in a PO. The price at the tme of PO date was say 100 INR....now we have GRNd 200 pcs. After 1 month the vendor will charge 105 INR for the same item. Case is price changes keep happening like this almost every month. How to address this issue in PO...?

When you do MIRO against PO, the prices are picked up automatically. In your case, the prices of GR will be picked up which are done against the PO as MIRO is basically settlement of GR/IR account. Remember the entries made at time of MIRO:
Vendor - Credit
GR/IR - Debit
At time of GR :
Gr/IR - Credit
Material - Debit.
So at time of MIRO, whatever amount will be in GR/IR will be debited.

Table for std cost of material

HI,
in which table can we get Std cost of material?

Try to check table MBEW for the field STPRS.
Hope this helps
Regards
Sai

Raw Material price change and its effect in costing of Quotation.

I have a scenario in which the Quotation is given on 11th May, and the costing of the Order is done where the Raw materials Details along with overhead costs is determined, and then sales value is quoted, after the production is done after 2 months, and at the time of dispath there is a change in the price of raw materials. The user wants to known that the net loss or profit against that order due to price change in the Raw material.
Will it be possible at the sales Order Level and whether it will give the costing as per the current RM rates.

I think the best way is to use a Make to order scenario with cost calculation in the order. the calculated cost is then stored in EK02 condition, the at invoicing time you can calculate the variance in CO/PA between real cost and estimated cost.
You have to ask the help of smart CO guy to do this.
Roberto

Component Price Change before CK11N for Std Cost Estimate-Mat(ppc1)

Similar Messages

Maybe you are looking for