Component / Requirement Quanity in CSMB

Hi Gurus,
           Can anyone please explain the difference between component and requirement quantity in tcode CSMB.
I have a multilevel bom.For example here is what I see:
Item                        Component qty                          requirement qty
item 1(stockable)               888.890                                      98
item 2(stockable)               .8976                                          1
item 3((stockable)              .6899                                          1
item4(text item)                   45                                           45
item 5(stockable)                40                                              5
item 5(stockable)                31.120                                        4
Thanks you all.

Hi,
First check whether it is in CSMB OR CS11
Required qty: Your requirement qty for FERT (Example 10 pcs reqmt qty)
Component qty: For producing 1 pc of FERT
                          how many HALB AND ROH is needed(Example 1 and 2 respectively)
   So for producing 10 pcs your HALB Reqmt is 10 pcs
                                      your ROH Reqmt is 20 pcs.
Regards,
nandha

Similar Messages

This component requires that the embedded font be declared with embedAsCFF=false.

I'm getting the following warning for my project.
"warning: incompatible embedded font 'MyFont' specified for views::MyViewInnerClass0 (MyViewInnerClass0_61) . This component requires that the embedded font be declared with embedAsCFF=false."
Here's what I have in my style.css file.
/* CSS file */
@namespace s "library://ns.adobe.com/flex/spark";
@namespace supportClasses "spark.globalization.supportClasses.*";
@namespace views "views.*";
@font-face {
          src: url("assets/MyFont.ttf");
fontFamily: "MyFont";
advancedAntiAliasing: true;
embedAsCFF: true;
@font-face {
          src: url("assets/MyFont.ttf");
fontFamily: "MyFont";
advancedAntiAliasing: false;
embedAsCFF: false;
The 2nd font section I have is what is suggested as the fix in most places but that isn't working out for me. I wonder if I'm missing something else.

I tried changing the name and it didn't work. Tried all sort of combinations too and none worked. Tried a different font and that didn't work too.
Turns out the problem wasn't in the declaration of the fonts but where I was using it.
I initially had the font declared globally
global
   fontFamily: DroidSansMono;
I saw that, in your comment you had mentioned "..then apply it to the component" so I applied the font to the label component
s|Label
fontFamily: DroidSansMono;
and boom.. no warning. Problem solved.
Thanks so much.

This component requires that the embedded font be declared with embedAsCFF=true.

Hey all,
I fall into a small problem with fonts embedding. In my application I have embedded over 50 fonts and all expect one works as expected.
That one shows an error "warning: incompatible embedded font 'Algerian-CFF' specified for spark.components::RichEditableText (RichEditableText310) . This component requires that the embedded font be declared with embedAsCFF=true."
I have been looking all over the internet for similar problem, without success. Why this font is not working while all the rest does? Any clues?
/* CSS file */
@namespace s "library://ns.adobe.com/flex/spark";
/* embedded font */
@font-face {
src: url("ttf/ALGER.ttf");
fontFamily: Algerian-CFF;
Thanks.

Thanks,
My issue is not to embed a font twice. Let me describe the issue so this will helpful.
I have embed a fonts like below code.And apply LucidaBlackletterSpark font for spark component but it gives me error like
"warning: incompatible embedded font 'LucidaBlackletterSpark' specified for spark.components::RichEditableText (RichEditableText2301) . This component requires that the embedded font be declared with embedAsCFF=true".
But Font have already embedAsCFF property true. I am not able to find the solution why it is give me this warning.Due to that i am not able to embed a font.
@font-face {
          src: url("assets/fonts/LucidaBlackletter.ttf");
          fontFamily: LucidaBlackletterSpark;
          embedAsCFF: true;
@font-face {
          src: url("assets/fonts/LucidaBlackletter.ttf");
          fontFamily: LucidaBlackletterMX;
          embedAsCFF: false;

Off set for component requirement in PM order

Dear Experts,
In my PM order, offset date for component requirement date is working only for the first component. for the next component it is taking basic start date( i e order generated date by default) as the requirement date even though i entered offset for some days.
Experts, please explain me how to come out of this problem.
Thanks & Best regards,
Praveen

Dear Praveen,
Its working Praveen.
Please check this way: 1st operation>double click operation no.>put component>double click item no. of component>now set offset
2nd operation>double click operation no.>put component>double click item no. of component>now set offset
Now suppose you taking two component for same operation then for the second you can have different offset by clicking item no. of that componet.
Please check and let us know again.
Regards,
Kaushal Rai

Component requirement date in subcontracting PO

Hello All,
I have subcontracting PR having delivery date as 26.11.2010 and release date as 17.10.2010 and planned delivery time as 40 days. I change the PR release date to 10.10.2010 and it shows the requirement date for the components as same as 10.10.2010 which is my requirement. But when I convert PR to PO it is showing the component requirement date as 19.09.2010 and release and delivery date same as in PR.
How system is showing requirement date in PO as 19.09.2010? Is some one has any idea?
Mayur Phalak

Hi,
Can you upload screenshots of what you see in ME53N & ME23N with details as seen in component list & the dates to picasaweb or some portal?
Regards,
Vivek

Component requirement date in subcontracting case

Hello All,
I have subcontracting PR having delivery date as 26.11.2010 and release date as 17.10.2010 and planned delivery time as 40 days. I change the PR release date to 10.10.2010 and it shows the requirement date for the components as same as 10.10.2010 which is my requirement. But when I convert PR to PO it is showing the component requirement date as 19.09.2010 and release and delivery date same as in PR. I want system should not change the component requirement date.
How system is showing requirement date in PO as 19.09.2010? Is some one has any idea?
Mayur Phalak

Hi Mayur
The requirement date for component in subcontract is Delivery date of the item minus planned delivery time -This is what SAP library says. But in your case I see a huge difference. Is your PR manually created or MRP generated?
Have you maintained info record? Is planned delivery time is copied from info record? You can see planned delivery time in PO delivery tab. (find out which value has been copied).
As per SAP standard when you press enter button in PO requirement date is redetermined based on planned delivery time in the PO delivery tab. So try giving Planned delivery time in PR or info record to adjust requirement date
Write to me if you are not clear.
Regards
Antony

Error activating CIF model for subcontractor PO w/component requirements

Hello CIF experts,
I'm having a problem with the CIF POs and PReqs between ECC and SCM. If the CIF model is already active, then a subcontractor PO with component requirements is created (the material exists in SCM but the components do not exist in SCM) then the order CIFs successfully to SCM.
However, if the CIF model is deactive, then a subcontractor PO with component requirements is created (the material exists in SCM but the components do not exist in SCM), then when the CIF model is activated, it fails. The error is "Product x for location y in model z does not exist".
We do not want to send all components to SCM because we do not plan components and do not want to overload SCM with additional data.
Can anyone answer why the order CIFs successfully if the model is active but why it fails when trying to activate the model?
Much thanks,
Elizabeth

Elizabeth
You have mentioned that you get an error that product X - loc Y does not exist in APO. Does this " product X" refer to the parent material or component material ? If the product X refers to component material then check your PO integration model and make sure the component is not included in the filter criteria by mistake - CFM5 tcode .
I understood your scenario and i believe that you must be able to transfer the parent subcontracting PO successfully to APO . Please delete the error queue and check your master data again in APO. Check if the parent material - location exists in APO and then create the integration model and activate it.
Thanks
Aparna

WIP over-completion increased component requirement qty

Hi all,
In normal situation, produce 1 product just 1 component. So that we create a discrete job in ebs to produce 1000 pcs of product and the component requirement qty is 1000 pcs.
However, in some cases, factory can produce more products based on this components.
To record the actual completion, we use 'Over-completion' and input 1011 pcs of product to complete.
The ebs system automatically change the component required qty = 1011 pcs. It makes factory seems need to procurement 11 pcs more to complete the production. (it also affect the MRP planning).
Please kindly advise how to fix it.
Best regards,
Laurie

Hi,
As mention "WIP over-completion increased component requirement qty" - yes, this is seeded functionality.
In Oracle, WIP Over completion qty is nothing but extra produced qty as per WIP job Qty. (ex. Job qty=10, total produced qty=12, i.e. 2 is over-completion qty)
Please explain expected requirement with example so that will figure out possible ways.
Thanks
ND

Component Required Quantity Field Mandatory In PM order

Dear All,
I want to make required quantity field as mandatory in PM order component tab.
Plz help
Rgards

Dear Friends,
Requirement for not changing the qty arises in the situtaion like,suppose a person has created the maint order for certain qty,and released either by him or by his superior.there is a possibility that component quanity can be changed by the lower level people.(like supervisor or technicinan).In this case ,it can be controlled by authorisation .ie Dont give order change authorisation to those people,so that componenet quanity cannot be changed by anyone other than authorised people.
This problem i am facing in my every projcet,and handling thro roles and authorisation only rather than going for making the quantity field mandatory with some devellopment and alll.
I hope it is clear.
Thanks and Regards
V.Dhanasekaran

Cisco UCS with FEX system Component requirements

Hi ,
I am looking for quick suggestion for required components to have a VMware vSAN implemented using FEX system with maximum Fabric trough put. Ideally a configuration for without multipath using single Fabric switch and later on to be able to upgrade to Multipath fabric.
We are in great rush to provide POC concept and was looking if you folks can suggest me on this. If need be you want to talk to me more in detail I can available.
Appreciate your help here.
Who can I reach to able to pull up build and quote the configurations for implementing complete UCS solution.
Are these below components absolutely required ?
2 x Nexus 2232PP 10GE Fabric Extenders
The Cisco Nexus 2232PP 10GE provides 32 x 10Gb loss-less low latency Ethernet and Fiber Channel Over Ethernet (FCoE) Small Form-Factor Pluggable Plus (SFP+) server ports and eight 10 Gb Ethernet and FCoE SFP+ uplink ports in a compact 1 rack unit (1RU) form factor. They enable Seamless inclusion of UCS rack servers into UCS Manager domain with UCS blade servers when connected to the UCS 6200 Fabric Interconnects, providing converged LAN, SAN, and management connectivity.
We currently have these below servers :
2 x UCSC-BASE-M2-C460
        524 GB RAM
        No SSDs
        No VIC Card
        4 x SAS 1 TB Drives
        1 x L1 Intel 1 Gbps Ethernet Adapter
        1 x L2 10Gbps Ethernet Adapter
        1 x LSI Mega RAID SAS 9240-8i (no RAID 5 support, Need a card that supports RAID5)
1 x UCSC-C240-M3L
        132 GB RAM
        30 TB SAS HDD
        1 x VIC Card
        1 x Intel I350 Gigabit Ethernet Card with 4 ports
        1 x LSI Mega RAID SAS 9240-8i (no RAID 5 support, Need a card that supports RAID5)
1 x 5548UP Nexus Switch ( Will I be able to use this switch in place of Nexus 2232PP 10GE Fabric Extenders to achieve complete UCS solution)

Cisco UCS Manager 2.2 supports an option to connect the C-Series Rack-Mount Server directly to the Fabric Interconnects. You do not need the Fabric Extenders. This option enables Cisco UCS Manager to manage the C-Series Rack-Mount Servers using a single cable for both management traffic and data traffic.
If you need high performance low latency (storage, for VMware VSAN), direct connection to UCS Fabric Interconnect and/or N5k is recommended.

How to lookup what datatype JSF tag component requires?

Kinda beginner question following on my part and not sure I'm asking this in the correct web-page speak?
I just happen to know if I have a tag such as <af:tree>, I know its value attribute requires an instance of oracle.adf.view.faces.model.TreeModel at runtime.
However how do I determine specifically the datatype that the tag-attribute requires at design time? For the majority of tags in JSF/ADF Faces this will be strings, but for tricky tags like <af:tree> how can I work this out?
The tag doco doesn't mention this. Do I need to go to the tag libraries? How would I do this in JDeveloper? Does JDeveloper provide any other help on looking this up?
Any help appreciated.
Regards,
CM.

The tagdoc for tree at
http://www.oracle.com/technology/products/jdev/htdocs/partners/addins/exchange/jsf/doc/tagdoc/core/tree.html
says about the value attribute:
"the hierarchy of tree data - must be of type oracle.adf.view.faces.model.TreeModel"
As to how I found that? Google. I find ADF documentation very hard to find any other way and often end up googling things like:
adf af:tree value site:oracle.com
Not exactly what you were looking for, I know, but hope it is of some help.

Is there any third party component required to run SAP Mobile ?

Hi Gurus,
What 3rd party mobile components are required to run SAP mobile (E.g DB2e)? Do any of them require separate licensing thatu2019s not covered by the SAP licence?
Thanks in Advance,
Dharani

Hi Larissa Limaravo,
Thank you so much for you detailed answer.
Can you please let me know your view on this please.
Q4 What do we get in terms of remote management (i.e. any of the security points above plus deployment of software and remote support)? Is there any benefit in moving to 7.1 from 7?
Thinking of the supplied XAPPS that are available with SAP mobile, how configurable are they in terms of:
Q5
u2022     Adding new fields (both for info in the field and for engineers to return additional data).
u2022     Changes to validation.
u2022     Changes to workflow within the application.
u2022     Anything else!
Q5.1 Is there an IDE or tool available for implementing configuration changes?
Q5.2 What weu2019re after here is a feel for the overall influence on functionality, expressed as a percentage (e.g. 0 no influence to 100% complete control), which can be achieved with configuration?
Q5.3 Typically, who is responsible for making configuration changes, would it be possible to do this in-house or would we require experienced consultants? If this is a split between the 2 could we get a feel based on the most commonly requested changes?
Q5.4 With regard to customizing supplied XAPPs or writing our own, would we be talking Java development through webdyn pro? How would customisation impact patching and upgrades of the SAP infrastructure?
Q6 Our assumption is that SAP mobile solutions are only suitable for SAP backend systems owing to the tight integration. In your experience, has anyone successfully implemented a SAP mobile solution on a non SAP backend system? Would you, as experienced SAP consultants, recommend such a venture?
Q6.1 How would we go about integration of other systems on the mobile device? For example GPS, Barcode, Cameras or other applications like boiler diagnostics. Again, can you break this down into tasks that can be performed in house vs. tasks that are typically performed by experienced consultants?
Q6.2 This is a bit of a vague question so I must apologies in advance: Company will ultimately control our production environment but weu2019d be interested in having some control to be able to deploy configuration changes without having to bother them. If you could suggest if and how this arrangement would be implemented, then I can approach company to assess the feasibility.
Thanks in Advance,
Dharani

QT MPEG 2 playback component requirements

Is the newest version able to work on a B&W G3? I know the published system requirements won't allow it, I was just wondering if some else has tried it? Let me know if it works.

The installer app that places the needed files on your computer has a "read me" declaration that suggests a G3 (or newer) with at least 128MB's of RAM.
You may have to "copy" the DVD contents on to your HD because of read/write speed issues from the source files, however.
Note that there are two installers. 6.3 is for QuickTime 6 and 6.4 is for QT 6 and 7. I believe the 6.3 installer is for QT prior to 6.4 (but could be wrong).

Lexmark printer says "a component required for printing is missing."

hi, im new to this forum so bear with me.
i use a lexmark x5470 printer and it worked fine for the past few years and suddenly it says, "Missing component: /Library/Printers/Lexmark/Drivers/.Resources/5400 Series Color 1.lut"
i just refilled the ink cartriges and it printed out the test paper (whenever you refill the cartridges it automatically prints the test page), so my printer definitely works, it just cant print out the files from my macbook.
i havent re-installed or installed my printer because i don't have the installation disc or anything of the sort.
any help would be appreciated.

So is that file it wants there?
/Library/Printers/Lexmark/Drivers/.Resources/5400 Series Color 1.lut
In the finder, select Go menu, Go to Folder... menu item. Then enter (or cut/paste) /Library/Printers/Lexmark/Drivers/.Resources/ and click the Go button. The Drivers/.Resources folder will open in the finder. See if 5400 Series Color 1.lut is in there. I'm guessing it's not.
I did some google searching for that X5470 printer and found a page to download it's support files and found this page. Then I clicked "change OS" and selected Macintosh and 10.6 from the popups on that page and clicked Filter. It brought up a link to support code to download; Lexmark 5400 Software support for Mac OS X 10.6. I downloaded that suff and took a look at it and it will install the requisite 5400 Series Color 1.lut file (among other stuff) in the proper place.
Here's the direct download link.
http://downloads.lexmark.com/downloads/cpd/5400WebInstaller1.0.1.dmg

Time Component required

Hi,
Can any one please let me know how to extend JTextField and create a time field, so that the user can enter the time in the format hh:mm.
Any working code will be of great help.
regards,
shantanu

You might be able to use JFormattedTextField. Otherwise you can check out this [url http://www.discoverteenergy.com/files/TextGroup.java]class i wrote before JFormattedCheckField existed:

Component / Requirement Quanity in CSMB

Similar Messages

Maybe you are looking for