Component Substitution in BOM

Hello,
I have some problem, my User have a material substitution in BOM component of my Finished Goods 25520. the Component material 10001520 was declared to be replaced by component material 10002520 but the effective date will be on September 7, 2008.
here come the problem, we made a production order for meterial 25520 on the date August 19, 2008. and made confirmation. when we check in the Prodcution order component Overview both the material 10001520 and 10002520 was pick up by the order and when examine closely material 10002520 (this is the one to be the substitute for 10001520 in september 7, 2008) it has zero req qty but it's backflushed indicator was tick, and when see the confirmation made to the order it has an error. since this material must not be pick by the order when the BOM exploded since this material is not yet effective in the BOM as desired.
why this happen?
please help, is am not clear on my description, please let me know.
thanks
Ryan
Edited by: Ryan Lazaro on Aug 26, 2008 8:53 AM

Hello Expert,
In CS11,
Material: 25520
Plant: 0160
BOM Usage: 1
Alternate BOM: 01
I see the following:
10001520  Valid from (14.10.2008)  Valid to (05.05.2008)
10001520  Valid from (14.05.2008)  Valid to (07.09.2008)
10002520  Valid from (07.09.2008)  Valid to (31.12.9999)
same amount, this was the series of bom component in CS11.
Please give your findings.
Thanks
Edited by: Ryan Lazaro on Aug 26, 2008 12:13 PM
Edited by: Ryan Lazaro on Aug 27, 2008 3:33 AM

Similar Messages

  • Fetch Open PO's based on component part numbers (BOM)

    Hi All,
    I need to fetch Open PO's based on component part numbers (BOM).
    Is there any standard FM or any T-Code or program to achieve this?

    Hi All,
    I need to fetch Open PO's based on component part numbers (BOM).
    Is there any standard FM or any T-Code or program to achieve this?

  • Component in the BOM whit the for decimal .

    Dear gurus,
    i need insert in the quantity of component in the BOM the value 1,1234 , a value whit for decimal but the system for the UM ( example KG) is 3 decimal in the  transaction CUNI .
    Are there the procedure for insert this value ?
    Thanks a lot
    Daniele Pistilli
    PP

    Hi,
    SAP Standard will allow u only 3 decimal palces.
    So do one thing increase the base quantity of header material so it can fullfill you're requirement..
    EX: in bom you have given like for one FERT material you want RAW material 1.1234..normal in this sap std will allow only up to
    1.123 only...
    For this in the BOM of FERT material header data PUT base Quantity 100 so that you can put youre RAW material Quantity as
    112.23.
    Regards,
    Ravi

  • Mass change in component Scrap % in BOM

    Hi Guru,
    Can someone explain me the process of mass change in component scrap % in BOM ? I have to make zero coponent scrap % in BOM for all materials.

    Dear Vikash,
    Check with t-code CEWB
    for this you need to define work area in OP77
    Regards
    Madhu

  • How to get calculated component quantity for BOM like in CS12

    Hi All,
    Please let me know how to get the calculated component quantity of BOM similar to the field in CS12.
    Regards
    Mahesh

    hi,
       [http://www.sap-topjobs.com/SpecialPP/overviewdoc1.pdf]

  • Add component to 200+ BOMs

    Hi,
             I want to add a single component to over 200 BOMs. Is there any mass change transaction ? I tried the CEWB but cant seem to figure out how to use it to add a single component to many BOMs.
    Thanks
    GS

    >
    GS wrote:
    > ok dudes, I am not getting a firm answer still.
    >
    > Can CEWB be used or not ? Whether LSMW or BDC is better is a later discussion.
    >
    > Also to use CS20 I need to specify a common component which would need to be replaced by this new component. I DO NOT have a common component in the 200+ BOMs. So where do I put the list of 200+BOMs to be updated ?
    >
    > Thanks
    > GS
    GS,
    1. CEWB cannot be used to mass add a Components to Multiple Material BOMS.
    CS20 if none of the BOM components are common for all 200, may be you can try to group them based on common materials and then try to run CS20 multiple times to complete your task.
    Final option is as described earlier LSMW and BDC.
    Regards,
    Prasobh

  • No Business Component Substitutions

    I am trying to extend a VO. I am able to see the substitution of the base VO with the custom VO in the database using jdr_utils.printdocument. But when I run the application, I get the "Definition attribute_name of type attribute not found" exception. The Personalization tab in the "About this Page" says "No Business Component Substitutions" in the substitutions section. Why is this page saying that there are no substitutions found when I could see it in the database. I have followed the exact same steps mentioned in the OAF Guide to extend a VO. Any help is greatly appreciated.
    Edited by: Raj S on Aug 8, 2009 7:16 PM

    Yes, I did bounce the apache. Now I am struck with the following huge error stack, each time I get into the page.
    oracle.apps.fnd.framework.OAException: Could not load application module 'oracle.apps.ar.irec.accountDetails.server.AccountDetailsAM'. at oracle.apps.fnd.framework.webui.OAJSPApplicationRegistry.registerApplicationModule(OAJSPApplicationRegistry.java:279) at oracle.apps.fnd.framework.webui.OAJSPApplicationRegistry.registerApplicationModule(OAJSPApplicationRegistry.java:78) at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:1184) at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:509) at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:430) at oa_html._OA._jspService(_OA.java:84) at oracle.jsp.runtime.HttpJsp.service(HttpJsp.java:119) at oracle.jsp.app.JspApplication.dispatchRequest(JspApplication.java:417) at oracle.jsp.JspServlet.doDispatch(JspServlet.java:267) at oracle.jsp.JspServlet.internalService(JspServlet.java:186) at oracle.jsp.JspServlet.service(JspServlet.java:156) at javax.servlet.http.HttpServlet.service(HttpServlet.java:588) at org.apache.jserv.JServConnection.processRequest(JServConnection.java:456) at org.apache.jserv.JServConnection.run(JServConnection.java:294) at java.lang.Thread.run(Thread.java:595) ## Detail 0 ## JBO-30003: The application pool (db2060.coresys.comYMCC50301oracle.apps.ar.irec.accountDetails.server.AccountDetailsAM) failed to checkout an application module due to the following exception: oracle.jbo.JboException: JBO-29000: Unexpected exception caught: oracle.jbo.JboException, msg=JBO-29000: Unexpected exception caught: java.lang.InstantiationException, msg=null at oracle.jbo.common.ampool.ApplicationPoolImpl.doCheckout(ApplicationPoolImpl.java:1619) at oracle.jbo.common.ampool.ApplicationPoolImpl.useApplicationModule(ApplicationPoolImpl.java:2366) at ......

  • BOM: Component Substitution

    Hi All,
    How to set up in the system for auto substitute BOM component when the main component not available. I have tried the alternative item where the substitute item also maintained as BOM item and assigned alternative group as 1, priority 2, strategy 2, usage probability 100% as well. When I perform MD02, the result it seems not correct because system create PR for the main component even though the stock is zero. My requirement system auto switch to alternative item due to the substitute component still plenty enough stock.  Your advice is appreciated.
    Best regards,
    Mahnansa

    Dear Mahnansa,
    Plz find Mr. Mangalraj inputs on Altenative items in BOM
    Eg:
    If there's a material Alt2 which can be used instead of a material called Alt1,now we will first form an Alternative item group using this 2 material.It can be more than 2 materials also.
    Now in our case after u enter Alt1 as the line item for a HALB or FERT,select that entire row and click on Item details or Press F7.In Item data screen,in the bottom under general data u can find the field for Alternative item group.
    Click that and enter the values as follows
    A-Alt Item Group
    2- Priority
    2- Strategy
    70% - Usage probability ,now come back.
    Now enter Alt2 as the line item and after that as i said select that row & press F7.
    Click on Alt.Item group button and enter the values.
    A,
    1,
    2,
    30%.Now save.
    Now let's assume this BOM is used for a HALB.Let's assume 10 quantity is mentioned in the BOM for each of this line item.
    Now if there's PIR for say 100 quantity
    After running MRP for the HALB the requirements will be seen as Alt1 700 required & Alt2 300 required.
    Here for the planning Only Usage Probability comes into picture.
    When you are doing the production booking for making 100 quantities,the system shows 1000 quantity of Alt1 and no Alt2 will be seen in good's movement's screen.
    Now the priority comes into picture,as we have given priority as 1 to Alt1 the systems proposes 1000 quantity of Alt1.
    So while planning Only usage probability is considered and requirements fallas as per that.
    While doing Production booking priority comes into picture.
    So Here as we have maintained priority 1 and strategy as 2 for Alt1,the systems proposes 1000 quantity of Alt1.
    If your strategy is then the planning & production will be as per the usage probability.
    Second case:
    If for Alt1 A & for Alt2- A
    2 1
    2 1
    70% 30%
    Planning will be 700 & 300 of Alt1 & Alt2.
    But for production booking 1000 & 300 of Alt1 , Alt2 will be proposed by the system.Because For Alt1 though the priority is 2,but its strategy is 2.
    For Alt2 priority1 but strategy is 1(Manual maintenance).
    also Plz check the below links
    [Alternative item in BOM;
    [Alternative BOM;
    [http://help.sap.com/saphelp_erp2005vp/helpdata/en/f4/7d3f9344af11d182b40000e829fbfe/frameset.htm]
    Regards
    kumar

  • Mass component substitution in Task List

    Hi Gurus,
    I'have so many Task Lists, and total have hundreds of line operations.
    But, now there material substitution. Let say, previously in Taks List using Material/Component "A", and now material "A" substituted become material/compenent "B".
    How could we do change (mass change) to all Component in Task List that previously using "A" and than replaced by "B" and how about if there are unit of measure differences .
    How do we do it ? Any T-Code to do this ?
    Regards,
    Tri W

    Tri W,
       The material will be replaced, with the follow up material,  once there isnt sufficient quantity available to satisfy the demand from the reference date entered on the MRP screen.
        However, it looks like this replacement of the follow up material only works if you manually enter the orginal material in the components tab or if you import the material from a BOM.This doesnt seem to work if the material is directly associated to the Task list(Even though this is also assigned a BOM number of Type "standard") . When you import the task list into the order, the Original material is not replaced with the Follow up material if there isnt sufficient stock available.This looks like a bug to me, you may want to consider raising a OSS note to see where that leads you, otherwise my apologize for misleading you. We had used the BOM and this worked perfectly for us,hence i was pretty sure this would work for materials assigend directly to task list(Since this also had a BOM number and type assigned to it).
    Best Regards
    Narasimhan

  • Purchase Order With Sub Item Component List for BOM material..??

    Hi MM Experts,
    We want to create PO with a component list that should be appears under the main item.
    The component list is a mterial BOM.
    Ex:- bom MATERIAL - CATALOG1 (Non Stock Materials)
    COMPONENT 1 :-ABCD
    COMPONENT 2 :- XYZ.
    WHEN I ENTER THE BOM MATERIAL:- CATALOG1 IN /ME21N . Higher-Level Item-
    Automatically botom line should be appear component 1 , 2 as a Sub Item.
    how to configur this issue..?? Its a standard Ponot Subcontract
    Thanks,
    NAR.

    Hi!
    If you have correctly maintained the BOM in CS01, make sure that in ME21N you enter "L" as the item category, and then, in the field "material", enter the finished product (the header material in your BOM). Then, enter all other required fields.
    When all mandatory data has been completed in ME21N, go to the "Material Data" tab. Here you will see an icon named "Components". If you click this icon, the materials in your BOM will be listed here.
    So, please, do not expect the BOM to be displayed with mother and daugther segments in the item overview of ME21N. Instead, consider that you will only be able to see the components if you click the "Components" icon under the "Material Data" tab at item detail level.
    I hope this helps!
    Esther.

  • Deleted Component appearing in BOM

    Dear Guru's,
    I m facing a strange situation where i have a BOM of material with one component and then i came to knw that,that material is not required any more so i removed the component  and deleted the BOM.
    But when i am running the MRP it is showing the deleted component,i am not able to understand hw it is happening.
    Kindly throw some light on this.
    With Regards.

    check in md04 of that bom component, is there any dependent requirement.May be mrp for that header material
    was carried out earlier before your bom change and later you have run mrp for components individually.
    Do one thing run mrp - single item multi level for your header material again with planing mode 3 - delete and recreate planning data.
    Regards,
    Dhaval

  • Mass component change in BOM

    hi
    i want to  mass change some components in BOM. For example in the BOM i have 10 components. Now i want to change 5 components in the BOM
    I have around 500 FG How to do that? Is it possible in LSMW?. or CS20?

    It is better to go for getting a BDC developed for all the mass changes in the BOM.
    Using CS20 you can only change a single component and replace with a new material. I think BDC is the best alternative.
    Hope this helps you.

  • Component unit in BOM

    Hi ,
    I have a product whose base unit is KG. In the bill of material we are maintaining as G(because qty is very less).
    When i run the MRP this quantity is getting rounded to 1.0.
    What do i need to check .
    Regards
    ShankarR

    Normally the base UoM is the lowest measurable unit. Since you have maintained KG for this, give this a try in your sandbox to check if it works in your business context.
    For the BOM header maintain a base unit say as 1000 or 10,000 then in the component for this material which is maintained in grams increase the qty in relation to the base qty. which you have maintained for the header.
    Now load demand & check if it meets your need.

  • Component determination in BOM

    Hello,
    I have to include a procedure in a BOM component to determine if that component must be selected or not according to a caracteristic but the option is not enabled in the BOM item.
    Does anybody know if it is a customizing issue and if yer, where to custimize it?
    Thanks
    Laura

    Laura,
    In the BOM, you can go and define the dependency for that BOM material based on the characteristic value.
    Thanks
    MG

  • Plant specific component views in BOM

    Hi,
    I have 2 Plants say, A and B. I have a Product say P which has several components C1, C2, C3 ...
    I wish to create a single centralized BOM with all the components. However, Plant A should be able to view components C1 and C2 only whereas Plant B should be able to view components C2 and C3 only.
    When I make changes in the centralized BOM, the change should be reflected in the respective Plant views accordingly. I do not want to create BOMs individually at each Plants for the Product.
    I tried using Group BOM and Plant Assignment, but not able to restrict component visibility as required above. I tried using Effectivity Filter using Effective Parameter as Plant. But doesn't seem to work ...
    Is there any simpler way ...?
    Thanks.
    Raj

    hi
    is plant A using only two components C1 &c2
    is plant B using only c2& c3
    plz let clear your requirement ,why its needed
    create alternative bom using authorisation key
    probably solve   your problem
                                      sasikanth

Maybe you are looking for