Components invalid in Standard Edition

Hi all
     have to upgrade from 11.2.0.2 to 11.2.0.4 and pre-upgrade tool indicates that Oracle Olap Api component is invalid.  Since this option is not availabe in Standard Edition, wanna know if I can safely ignore it or should I try to de-install it prior to upgrading. And if so, shold apply note 1362752.1?
thanks in advance
Gustavo.

It means that these components are not supported by your database edition. After the upgrade they will remain at the original version and not been patched.
As far as I know that they are not necessary.
Consequently, you  will not face issues , if you do not specially use these components.

Similar Messages

  • Microsoft server 2003 standard edition r2 x64 bit product shows invalid product.

    Dear all,
    I am facing a problem, to register  Microsoft server 2003 standard edition r2 x64 bit. My product key is ok. But on time of registration this product it will not accept my key or on Microsoft product registration support it's show its a invalid product. 
    Please help me to register this product. 
    Thanks
    Puneet

    You need to contact Microsoft's Activation Center and talk to someone.  The phone numbers for reaching them are on the activation page you go through when trying to activate manually.  Apparently the activation code you have is not 'ok', and only
    Microsoft can help you with that.
    A second thought is where did you get the media?  If not from a reputable Microsoft source, then it could be the copy you have is a pirated copy with a key that Microsoft has deactivated.  Again, only Microsoft can tell you.
    .:|:.:|:. tim

  • Web Service Client(Console App) not working on Windows Server 2008 R2 Standard Edition

    I am trying to consume an ASMX Web Service in a console app, its working fine in Windows 7,Windows Server 2012 Standard,Windows Server 2008 R2 DataCenter,Windows Server 2008 R2 Enterprise, But its not working in Windows Server 2008 R2 Standard Edition which
    is the deployment server.
    I tried consuming the ASMX web service using Web Reference and Service Reference as well but its not helping. Its throwing up the following error,
    Message:There is an error in XML document (1, 331491).
    Inner Exception : System.Xml.XmlException: '.', hexadecimal value 0x00, is an invalid character. Line 1, position 331491.
    The scenario is that i call the web service and it returns me an XML i am not able to receive the XML on Windows Server 2008 R2 Standard Edition.
    Please provide suggestions on this I need to resolve this ASAP.

    Hi,
    This question is better asked here:
    http://social.msdn.microsoft.com/Forums/en-US/home?forum=asmxandxml
    Experts here are more familiar about it and they can give you more efficient suggestion.
    Thank you.

  • Sample Response File for Oracle Database 12c Standard Edition on Oracle Linux 6.4 -- working

    oracle@styles-and-artists-development-oracle database]$ cat response/db_install.rsp
    ## Copyright(c) Oracle Corporation 1998,2013. All rights reserved.##
    ## Specify values for the variables listed below to customize     ##
    ## your installation.                                             ##
    ## Each variable is associated with a comment. The comment        ##
    ## can help to populate the variables with the appropriate        ##
    ## values.                                                        ##
    ## IMPORTANT NOTE: This file contains plain text passwords and    ##
    ## should be secured to have read permission only by oracle user  ##
    ## or db administrator who owns this installation.                ##
    # Do not change the following system generated value.
    oracle.install.responseFileVersion=/oracle/install/rspfmt_dbinstall_response_schema_v12.1.0
    # Specify the installation option.
    # It can be one of the following:
    #   - INSTALL_DB_SWONLY
    #   - INSTALL_DB_AND_CONFIG
    #   - UPGRADE_DB
    oracle.install.option=INSTALL_DB_AND_CONFIG
    # Specify the hostname of the system as set during the install. It can be used
    # to force the installation to use an alternative hostname rather than using the
    # first hostname found on the system. (e.g., for systems with multiple hostnames
    # and network interfaces)
    ORACLE_HOSTNAME=styles-and-artists-development-oracle
    # Specify the Unix group to be set for the inventory directory. 
    UNIX_GROUP_NAME=oracle
    # Specify the location which holds the inventory files.
    # This is an optional parameter if installing on
    # Windows based Operating System.
    INVENTORY_LOCATION=/home/oracle/oracleInventory
    # Specify the languages in which the components will be installed.            
    # en   : English                  ja   : Japanese                 
    # fr   : French                   ko   : Korean                   
    # ar   : Arabic                   es   : Latin American Spanish   
    # bn   : Bengali                  lv   : Latvian                  
    # pt_BR: Brazilian Portuguese     lt   : Lithuanian               
    # bg   : Bulgarian                ms   : Malay                    
    # fr_CA: Canadian French          es_MX: Mexican Spanish          
    # ca   : Catalan                  no   : Norwegian                
    # hr   : Croatian                 pl   : Polish                   
    # cs   : Czech                    pt   : Portuguese               
    # da   : Danish                   ro   : Romanian                 
    # nl   : Dutch                    ru   : Russian                  
    # ar_EG: Egyptian                 zh_CN: Simplified Chinese       
    # en_GB: English (Great Britain)  sk   : Slovak                   
    # et   : Estonian                 sl   : Slovenian                
    # fi   : Finnish                  es_ES: Spanish                  
    # de   : German                   sv   : Swedish                  
    # el   : Greek                    th   : Thai                     
    # iw   : Hebrew                   zh_TW: Traditional Chinese      
    # hu   : Hungarian                tr   : Turkish                  
    # is   : Icelandic                uk   : Ukrainian                
    # in   : Indonesian               vi   : Vietnamese               
    # it   : Italian                                                  
    # all_langs   : All languages
    # Specify value as the following to select any of the languages.
    # Example : SELECTED_LANGUAGES=en,fr,ja
    # Specify value as the following to select all the languages.
    # Example : SELECTED_LANGUAGES=all_langs 
    SELECTED_LANGUAGES=en
    # Specify the complete path of the Oracle Home.
    ORACLE_HOME=/extended2/oracleBase/db12c1
    # Specify the complete path of the Oracle Base.
    ORACLE_BASE=/extended2/oracleBase
    # Specify the installation edition of the component.                    
    # The value should contain only one of these choices.       
    #   - EE     : Enterprise Edition                               
    #   - SE     : Standard Edition                                 
    #   - SEONE  : Standard Edition One
    #   - PE     : Personal Edition (WINDOWS ONLY)
    oracle.install.db.InstallEdition=SE
    # PRIVILEGED OPERATING SYSTEM GROUPS                                          #
    # Provide values for the OS groups to which OSDBA and OSOPER privileges       #
    # needs to be granted. If the install is being performed as a member of the   #
    # group "dba", then that will be used unless specified otherwise below.       #
    # The value to be specified for OSDBA and OSOPER group is only for UNIX based #
    # Operating System.                                                           #
    # The DBA_GROUP is the OS group which is to be granted OSDBA privileges.
    oracle.install.db.DBA_GROUP=osdba
    # The OPER_GROUP is the OS group which is to be granted OSOPER privileges.
    # The value to be specified for OSOPER group is optional.
    oracle.install.db.OPER_GROUP=osoper
    # The BACKUPDBA_GROUP is the OS group which is to be granted OSBACKUPDBA privileges.
    oracle.install.db.BACKUPDBA_GROUP=bckdba
    # The DGDBA_GROUP is the OS group which is to be granted OSDGDBA privileges.
    oracle.install.db.DGDBA_GROUP=dbdba
    # The KMDBA_GROUP is the OS group which is to be granted OSKMDBA privileges.
    oracle.install.db.KMDBA_GROUP=kmdba
    #                               Grid Options                                  #
    # Specify the type of Real Application Cluster Database
    #   - ADMIN_MANAGED: Admin-Managed
    #   - POLICY_MANAGED: Policy-Managed
    # If left unspecified, default will be ADMIN_MANAGED
    oracle.install.db.rac.configurationType=
    # Value is required only if RAC database type is ADMIN_MANAGED
    # Specify the cluster node names selected during the installation.
    # Leaving it blank will result in install on local server only (Single Instance)
    # Example : oracle.install.db.CLUSTER_NODES=node1,node2
    oracle.install.db.CLUSTER_NODES=
    # This variable is used to enable or disable RAC One Node install.
    #   - true  : Value of RAC One Node service name is used.
    #   - false : Value of RAC One Node service name is not used.
    # If left blank, it will be assumed to be false.
    oracle.install.db.isRACOneInstall=
    # Value is required only if oracle.install.db.isRACOneInstall is true.
    # Specify the name for RAC One Node Service
    oracle.install.db.racOneServiceName=
    # Value is required only if RAC database type is POLICY_MANAGED
    # Specify a name for the new Server pool that will be configured
    # Example : oracle.install.db.rac.serverpoolName=pool1
    oracle.install.db.rac.serverpoolName=
    # Value is required only if RAC database type is POLICY_MANAGED
    # Specify a number as cardinality for the new Server pool that will be configured
    # Example : oracle.install.db.rac.serverpoolCardinality=2
    oracle.install.db.rac.serverpoolCardinality=
    #                        Database Configuration Options                       #
    # Specify the type of database to create.
    # It can be one of the following:
    #   - GENERAL_PURPOSE/TRANSACTION_PROCESSING                      
    #   - DATA_WAREHOUSE                               
    oracle.install.db.config.starterdb.type=GENERAL_PURPOSE
    # Specify the Starter Database Global Database Name.
    oracle.install.db.config.starterdb.globalDBName=cbd
    # Specify the Starter Database SID.
    oracle.install.db.config.starterdb.SID=cdb1
    # Specify whether the database should be configured as a Container database.
    oracle.install.db.ConfigureAsContainerDB=true
    # Specify the  Pluggable Database name for the pluggable database in Container Database.
    oracle.install.db.config.PDBName=pdb1
    # Specify the Starter Database character set.
    #  One of the following
    #  AL32UTF8, WE8ISO8859P15, WE8MSWIN1252, EE8ISO8859P2,
    #  EE8MSWIN1250, NE8ISO8859P10, NEE8ISO8859P4, BLT8MSWIN1257,
    #  BLT8ISO8859P13, CL8ISO8859P5, CL8MSWIN1251, AR8ISO8859P6,
    #  AR8MSWIN1256, EL8ISO8859P7, EL8MSWIN1253, IW8ISO8859P8,
    #  IW8MSWIN1255, JA16EUC, JA16EUCTILDE, JA16SJIS, JA16SJISTILDE,
    #  KO16MSWIN949, ZHS16GBK, TH8TISASCII, ZHT32EUC, ZHT16MSWIN950,
    #  ZHT16HKSCS, WE8ISO8859P9, TR8MSWIN1254, VN8MSWIN1258
    oracle.install.db.config.starterdb.characterSet=AL32UTF8
    # This variable should be set to true if Automatic Memory Management
    # in Database is desired.
    # If Automatic Memory Management is not desired, and memory allocation
    # is to be done manually, then set it to false.
    oracle.install.db.config.starterdb.memoryOption=true
    # Specify the total memory allocation for the database. Value(in MB) should be
    # at least 256 MB, and should not exceed the total physical memory available
    # on the system.
    # Example: oracle.install.db.config.starterdb.memoryLimit=512
    oracle.install.db.config.starterdb.memoryLimit=512
    # This variable controls whether to load Example Schemas onto
    # the starter database or not.
    oracle.install.db.config.starterdb.installExampleSchemas=true
    # Passwords can be supplied for the following four schemas in the             #
    # starter database:                                                           #
    #   SYS                                                                       #
    #   SYSTEM                                                                    #
    #   DBSNMP (used by Enterprise Manager)                                       #
    # Same password can be used for all accounts (not recommended)                #
    # or different passwords for each account can be provided (recommended)       #
    # This variable holds the password that is to be used for all schemas in the
    # starter database.
    oracle.install.db.config.starterdb.password.ALL=CDBadmin12345#
    # Specify the SYS password for the starter database.
    oracle.install.db.config.starterdb.password.SYS=CBDsys12345#
    # Specify the SYSTEM password for the starter database.
    oracle.install.db.config.starterdb.password.SYSTEM=PDBsys12345#
    # Specify the DBSNMP password for the starter database.
    oracle.install.db.config.starterdb.password.DBSNMP=DBsnmp12345#
    # Specify the PDBADMIN password required for creation of Pluggable Database in the Container Database.
    oracle.install.db.config.starterdb.password.PDBADMIN=PDBadmin12345#
    # Specify the management option to use for managing the database.
    # Options are:
    # 1. CLOUD_CONTROL - If you want to manage your database with Enterprise Manager Cloud Control along with Database Express.
    # 2. DEFAULT   -If you want to manage your database using the default Database Express option.
    oracle.install.db.config.starterdb.managementOption=DEFAULT
    # Specify the OMS host to connect to Cloud Control.
    # Applicable only when oracle.install.db.config.starterdb.managementOption=CLOUD_CONTROL
    oracle.install.db.config.starterdb.omsHost=
    # Specify the OMS port to connect to Cloud Control.
    # Applicable only when oracle.install.db.config.starterdb.managementOption=CLOUD_CONTROL
    oracle.install.db.config.starterdb.omsPort=
    # Specify the EM Admin user name to use to connect to Cloud Control.
    # Applicable only when oracle.install.db.config.starterdb.managementOption=CLOUD_CONTROL
    oracle.install.db.config.starterdb.emAdminUser=
    # Specify the EM Admin password to use to connect to Cloud Control.
    # Applicable only when oracle.install.db.config.starterdb.managementOption=CLOUD_CONTROL
    oracle.install.db.config.starterdb.emAdminPassword=
    # SPECIFY RECOVERY OPTIONS                                                    #
    # Recovery options for the database can be mentioned using the entries below  #
    # This variable is to be set to false if database recovery is not required. Else
    # this can be set to true.
    oracle.install.db.config.starterdb.enableRecovery=true
    # Specify the type of storage to use for the database.
    # It can be one of the following:
    #   - FILE_SYSTEM_STORAGE
    #   - ASM_STORAGE
    oracle.install.db.config.starterdb.storageType=FILE_SYSTEM_STORAGE
    # Specify the database file location which is a directory for datafiles, control
    # files, redo logs.        
    # Applicable only when oracle.install.db.config.starterdb.storage=FILE_SYSTEM_STORAGE
    oracle.install.db.config.starterdb.fileSystemStorage.dataLocation=/extended1/db/data
    # Specify the recovery location.
    # Applicable only when oracle.install.db.config.starterdb.storage=FILE_SYSTEM_STORAGE
    oracle.install.db.config.starterdb.fileSystemStorage.recoveryLocation=/extended1/db/recovery
    # Specify the existing ASM disk groups to be used for storage.
    # Applicable only when oracle.install.db.config.starterdb.storageType=ASM_STORAGE
    oracle.install.db.config.asm.diskGroup=/dev/oracleasm
    # Specify the password for ASMSNMP user of the ASM instance.                
    # Applicable only when oracle.install.db.config.starterdb.storage=ASM_STORAGE
    oracle.install.db.config.asm.ASMSNMPPassword=ASMsnmp122345#
    # Specify the My Oracle Support Account Username.
    #  Example   : [email protected]
    MYORACLESUPPORT_USERNAME=
    # Specify the My Oracle Support Account Username password.
    # Example    : MYORACLESUPPORT_PASSWORD=password
    MYORACLESUPPORT_PASSWORD=
    # Specify whether to enable the user to set the password for
    # My Oracle Support credentials. The value can be either true or false.
    # If left blank it will be assumed to be false.
    # Example    : SECURITY_UPDATES_VIA_MYORACLESUPPORT=true
    SECURITY_UPDATES_VIA_MYORACLESUPPORT=false
    # Specify whether user doesn't want to configure Security Updates.
    # The value for this variable should be true if you don't want to configure
    # Security Updates, false otherwise.
    # The value can be either true or false. If left blank it will be assumed
    # to be false.
    # Example    : DECLINE_SECURITY_UPDATES=false
    DECLINE_SECURITY_UPDATES=flase
    # Specify the Proxy server name. Length should be greater than zero.
    # Example    : PROXY_HOST=proxy.domain.com
    PROXY_HOST=
    # Specify the proxy port number. Should be Numeric and atleast 2 chars.
    # Example    : PROXY_PORT=25
    PROXY_PORT=
    # Specify the proxy user name. Leave PROXY_USER and PROXY_PWD
    # blank if your proxy server requires no authentication.
    # Example    : PROXY_USER=username
    PROXY_USER=
    # Specify the proxy password. Leave PROXY_USER and PROXY_PWD 
    # blank if your proxy server requires no authentication.
    # Example    : PROXY_PWD=password
    PROXY_PWD=
    # Specify the proxy realm.
    # Example    : PROXY_REALM=metalink
    PROXY_REALM=
    # Specify the Oracle Support Hub URL.
    # Example    : COLLECTOR_SUPPORTHUB_URL=https://orasupporthub.company.com:8080/
    COLLECTOR_SUPPORTHUB_URL=
    # Specify the auto-updates option. It can be one of the following:
    #   - MYORACLESUPPORT_DOWNLOAD
    #   - OFFLINE_UPDATES
    #   - SKIP_UPDATES
    oracle.installer.autoupdates.option=SKIP_UPDATES
    # In case MYORACLESUPPORT_DOWNLOAD option is chosen, specify the location where
    # the updates are to be downloaded.
    # In case OFFLINE_UPDATES option is chosen, specify the location where the updates
    # are present.
    oracle.installer.autoupdates.downloadUpdatesLoc=
    # Specify the My Oracle Support Account Username which has the patches download privileges 
    # to be used for software updates.
    #  Example   : [email protected]
    AUTOUPDATES_MYORACLESUPPORT_USERNAME=
    # Specify the My Oracle Support Account Username password which has the patches download privileges 
    # to be used for software updates.
    # Example    : AUTOUPDATES_MYORACLESUPPORT_PASSWORD=password
    AUTOUPDATES_MYORACLESUPPORT_PASSWORD=

    This is the simplest installation you can get, but if you want to do a fast response file based installation, there it is.

  • Problem installing Oracle 8i(8.1.7) standard edition on windows 2000 server

    I am trying to install Oracle 8i (8.1.7) standard edition on windows 2000 server but the setup program doesn't run.
    It starts up, allocates some ram then closes before a window even pops up.
    I also have MSSQL server installed on this computer, does that conflict?
    Has anyone encountered this problem before? If so, please give a solution if you have one, thanks,
    OPS

    Yes. There is a bug with Pent4, Win2000 & Oracle8i.
    Here is the workaround:
    This is a known bug with Oracle java-based applications and Pentium 4 Use this work-around:
    1) Copy the install directory from the CD to the hard disk.
    2) Edit oraparam.ini and modify it as follows:
    * Edit the "SOURCE=" line to to show the full path to the CD ; SOURCE={CD DRIVE LETTER}:\stage\products.jar)
    * Edit the "JRE_LOCATION" line to show the full path to the CD ;
    JRE_LOCATION={CD DRIVE
    LETTER}:\stage\Components\oracle\swd\jre\1.1.7\1\DataFiles\Expanded)
    * Edit the "OUI_LOCATION" line to show the full path to the CD ;
    OUI_LOCATION={CD DRIVE
    LETTER}:\stage\Components\oracle\swd\oui\1.6.0.9.0\1\DataFiles\Expanded
    * Edit the "JRE_MEMORY_OPTIONS" line to include "-nojit" as the first argument ;
    JRE_MEMORY_OPTIONS=-nojit
    -ms16m -mx32m
    3) Start setup.exe from your hard drive
    Choose a Custom install and choose not to create a database during the install.
    This way, the Database
    Configuration Assistant will not be launched during installation. DONT SELECT
    NET8 products for installation.
    You need to put the same java parameters for the DB configurator and the Net8
    Configurator
    to run.
    -nojit -ms16m -mx32m before -classpath on:
    * assistants\dbca\DBAssist.cl
    * network\tools\netca.cl
    ** Run the DataBaseConfigurationAssistant and NetworkConfigurationAssistant after installation.
    Hope it helps!
    Amrit

  • Standard Edition ONE and Advanced Installation

    Hello,
    I would like to perform an installation of the Oracle DB 11g Standard Edition ONE by using the Advanced installation. However, the Standard Edition ONE option is not available in the Advanced installation.
    Can I use the Standard Edition option?
    How can I proceed?
    Thanks!
    :)

    Nathan Morgan wrote:
    I have installed SE1 many times by clicking the SE option on the installer page. There is no SE1 option. From the point of view of the database installer SE1 and SE are identical. The software components are the same. The limitation in the licence agreement is that SE1 is restricted to a single machine with maximum capacity 2 sockets (2 n-core processors) -but- SE can be installed as a multple node RAC cluster with a maximum total capacity of 4 sockets (4 n-core processors). For example, see Oracle® Database Licensing Information 11g Release 1 (11.1) Part Number B28287-08
    I AGAIN referenced that document. And again I do not see anything in the Licensing document that says you INSTALL SE1 by selecting SE. I see a lot of references to the fearture comparison. So I ASSUME that the installation is by selecting SE and using moral control over how it is deployed.
    Could you please copy/paste the paragraph that turns it from assumption to fact ..

  • Java(TM) 2 Platform Standard Edition binary has stopped working

    Does anyone ever put ODAC10203x64.zip into Windows Server 2008 x64? I hit the error:
    Java(TM) 2 Platform Standard Edition binary has stopped working
    Ming Man

    Hi Mark,
    Let me get you more details.
    I have Windows Server 2008 x64 running with Visual Studio 2008 installed.
    For Oracle, I have cleared all my previous installation and even deleted all the folders for previous installation of ODP.NET. After that I only installed the Oracle Database 10g Client Release 2 (10.2.0.4) from the link you gave (I installed all the components) :
    http://www.oracle.com/technology/software/products/database/oracle10g/htdocs/10204_winx64_vista_win2k8.html
    I have Oracle Database 11g running on VMWare on Windows XP 32 bit.
    When I run my WinForm application using code so far so good. I extract data from the HR schema and put them in listbox, perfectly no error.
    But when I am trying to create by Add New Data Source... then I hit the:
    Attempt to load Oracleclient libraries threw BadImageFormatException. This problem will occur when running in 64 bit mode with the 32 bit Oracle client components
    Hope that can give you a better idea.
    Ming Man

  • Weblogic Enterprise or Standard Edition

    Hello there,
    Could anyone please advise if it's possible to find out whether you're running Weblogic 11g Standard or Enterprise edition?
    There doesn't seem to be any details in the console apart from the version (10.3.1).
    Any help greatly appreciated !

    Hi,
    There is only one WebLogic Server software download. Whether you need a WebLogic Server Enterprise Edition or a WebLogic Suite license depends on whether you use the premium components which are included in the WebLogic Server Enterprise Edition or WebLogic Suite licenses.
    For WebLogic Server 11g, the packaging is as follows:
    WebLogic Server Standard Edition:
                 includes WebLogic Server
                             Kodo Enterprise
                             TopLink and ADF
                             JDeveloper
                             Enterprise Pack for Eclipse
    WebLogic Server Enterprise Edition:
                 includes WebLogic Server Standard Edition
                              + Clustering
                              +Enterprise Manager Diagnostics Pack
    WebLogic Suite:
                 includes WebLogic Server Enterprise Edition
                              + Coherence EE
                              + JRockit Real Time
                              + Management Pack for Coherence
                              + iAS EE (on WebLogic)
                              + WL Operations Control
    Thanks,
    Sharmela

  • Oracle 10g standard edition installation and problems with logon (help pls)

    I installed 10g standard edition, however I got the following two messages during installation:
    1) The host IP address can not be determined
    2) Missing or Invalid password ...
    Eventhough I unlocked all the passwords during install (tiger/scott, sys, system, etc) I can not logon now with none of them ("invalid username/password: logon denied"). I also get "ORA-12170: TNS: Connect Timeout Occured" when trying to lgoon with my email addr and password used for installation.
    Please help, this is frustrating. Thx!
    P.S> Do I need to input anything in the "Host String" box ?

    Chances are
    1) you are using WIndows of some sort;
    2) your machine does not have a static IP address (you are using DHCP);
    3) you have not installed the loopback adapter, as desrcibed in the installation document.
    You may want to review the Oracle Database 10g (release whichever you are using) "Installation Guide" manual for your operating system again. I think you missed a step.

  • ENTERPRISE EDITION 데이터베이스를 STANDARD EDITION으로 변경하는 법

    제품 : ORACLE SERVER
    작성날짜 : 2004-08-31
    ENTERPRISE EDITION 데이터베이스를 STANDARD EDITION으로 변경하는 법
    ====================================================
    PURPOSE
    이 문서는 Enterprise Edition 데이터베이스를 Standard Edition 데이터베이스로
    변경하는 방법에 대하여 설명한다.
    Introduction:
    Oracle 서버는 Standard Edition과 Enterprise Edition 사이에 다양한 차이점이
    존재한다. 두 Edition간의 차이점에 대하여는 메타링크에서 <Note:1011449.7>와
    <Note:112591.1>를 참조한다.
    다양한 Option들을 사용하는 경우 이 두 Version간의 차이점 때문에, Enterprise
    Edition에서 Standard Edition으로 변경하는 것이 간단하지 않다. 사실 이러한
    문제는 Enterprise Edition이 Standard Edition에서는 사용할 수 없는 많은
    Data Dictionary object들을 포함하고 있기 때문이다. 단순히 Standard Edition
    소프트웨어를 설치하더라도 쓸모없거나 데이터베이스를 관리하면서 문제를 만들
    소지가 있는 Data Dictionary object 가 남아 있을 뿐이다.
    Standard Edition에서 Enterprise Edition으로 변경할 때는 단순히 적합한
    소프트위어를 설치하고, 새 Oralce 특색을 위한 Oracle Data Dictionary 를
    업그레이드 하기 CATALOG.SQL과 CATPROC.SQL (또는 EE Version 소프트웨어의
    Advanced Replication 같은 Option 사용을 위한 Data Dictionary 스크립트)를
    실행하면 된다.
    Actions:
    Enterprise Edition에서 Standard Edition으로 돌아가는 가장 적합한 방법은
    Export/Import 를 이용하는 것이다. SYS 스키마의 Object들은 추출되지 않기
    때문에 이것만이 Enterprise Edition에만 있는 Data Dictionary object들을
    제거하는 방법이다.
    Standard Edition 데이터베이스로 Import 후에는 MDSYS 계정과 같은 Enterprise
    Edition 기능들과 연관이 있는 스키마들을 삭제하는 것만 필요하다.
    NOTE: CAT* 스크립트들을 실행하는 것만으로도 EE 에서 SE 로 변경할 수는
    있지만, data dictionary에서 더 이상 사용할 수 없는 Object들을 볼 수 있다.
    이러한 invalid object들을 제거 하는것을 원하지 않는다면, EE 소프트웨어를
    설치하고 데이터베이스를 생성 후 data를 import 해야만 한다.
    RELATED DOCUMENTS
    Oracle8i Getting To Know manual
    Oracle8i Utilities manual
    <Note:139642.1> Converting from Enterprise Edition to Standard Edition
    <Note:1011449.7> Differences between Oracle7 Workgroup Server and Oracle7
    Enterprise Server
    <Note:112591.1> Differences Between Standard Edition and Enterprise
    Edition in 8i
    <Note:117048.1> How to Upgrade from Standard to Enterprise Edition

  • OIM installation with Oracle db Standard Edition

    The 11g version of OIM, OAM works with Oracle 11g db Enterprise Edition. Will these components work with Oracle db 11g Standard Edition ?
    If this works then I am planning to use only for prototype purpose, where I can use a low end server.

    Thanks Thiago,
    Looks like the Enterprise Edition is required only for OAAM. rest of the components like OAM, OIM, OID and OVD will work with Standard Edition. Is my assumption correct ?
    Thanks!
    Kabi
    Followings are the extract from the certification matrix.
    +. The Oracle databases listed in this column are supported on all configurations (including RAC) and platforms that the database team supports. Check Certify for details.+
    +. Oracle recommends using latest Oracle DB PSU's. For latest recommended patch information, refer to https://support.oracle.com/+
    +. For OAAM, Oracle recommends Oracle Database Enterprise Edition for production deployments.+

  • Find Weblogic server is Enterprise or Standard Edition

    Hi,
    I need to find if the Weblogic server version in my windows server is standards or enterprise edition.
    My  weblogic version 10.3.6.0 which was configured earlier and now we have got the enterprise version lisence
    Regards,
    Gaurav

    Hi,
    There is only one WebLogic Server software download. Whether you need a WebLogic Server Enterprise Edition or a WebLogic Suite license depends on whether you use the premium components which are included in the WebLogic Server Enterprise Edition or WebLogic Suite licenses.
    For WebLogic Server 11g, the packaging is as follows:
    WebLogic Server Standard Edition:
                 includes WebLogic Server
                             Kodo Enterprise
                             TopLink and ADF
                             JDeveloper
                             Enterprise Pack for Eclipse
    WebLogic Server Enterprise Edition:
                 includes WebLogic Server Standard Edition
                              + Clustering
                              +Enterprise Manager Diagnostics Pack
    WebLogic Suite:
                 includes WebLogic Server Enterprise Edition
                              + Coherence EE
                              + JRockit Real Time
                              + Management Pack for Coherence
                              + iAS EE (on WebLogic)
                              + WL Operations Control
    Thanks,
    Sharmela

  • Co-location of persistent chat and monitoring databases on Standard Edition server

    Hello, I've seen all kinds of different answers to this question around the web with conflicting answers.
    We have a basic IM/Presence only install of Lync 2013 and now want to deploy Monitoring and Persistent Chat roles.
    As per this blog, it states you can co-locate all of these on one FE server.
    http://windowspbx.blogspot.ca/2012/07/aaa-donotpost-install-lync-standard.html
    Which does match what this TechNet article states:
    http://technet.microsoft.com/en-us/library/gg398131.aspx
    However, in the Blog, it says you need to install Full SQL Server 2008 in order to collocate, yet this goes against what TechNet says is possible, in that you can have all databases in one instance:
    Each SQL instance can contain only a single back-end database (for an Enterprise Edition Front End pool), single Monitoring database, single Archiving database, single persistent chat database, and single persistent chat compliance database.
    I guess my question is, can I simply install Monitoring and Persistent Chat using the same default SQL Server 2012 instance that was installed along with the Front End Standard Edition server (RTC instance)? Or should I create a new instance? Or do I need
    to install a new SQL Server 2012 somewhere on a different server altogether?
    Thanks!

    Hi,
    Lync standard edition server has SQL express database by default to host RTC instance. Monitoring server required SQL reporting services, SQL express does not have reporting components part of it. Hence, you required full SQL version for monitoring
    and archiving deployment.
    Technically, you can install full SQL server on the standard edition server itself. But , it is not recommended in production environment. It's good idea to install SQL server on a dedicated server for hosting monitoring and archiving database.
    Thanks
    Saleesh
    If answer is helpful, please hit the green arrow on the left, or mark as answer. Blog : http://blogs.technet.com/b/saleesh_nv/

  • FAST_START_MTTR_TARGET & Redo Log Advisor in 10g Standard Edition

    OS: Oracle Enterprise Linux 5 Update 2 (64-bit)
    DB: 10.2.0.4
    I've been trying to set the FAST_START_MTTR_TARGET in my 10.2.0.4 Standard Edition database. As well as wanting the value set for recovery reasons, I'd also like to use the Redo Advisor Log to determine the best size for my redo logs.
    [oracle@scgamadb01pl ~]$ sqlplus / as sysdba
    SQL*Plus: Release 10.2.0.4.0 - Production on Thu Oct 16 15:04:32 2008 Copyright (c) 1982, 2007, Oracle. All Rights Reserved.
    Connected to:
    Oracle Database 10g Release 10.2.0.4.0 - 64bit Production
    SQL> ALTER SYSTEM SET fast_start_mttr_target=300;
    ALTER SYSTEM SET fast_start_mttr_target=300
    ERROR at line 1:
    ORA-02097: parameter cannot be modified because specified value is invalid
    ORA-00439: feature not enabled: Fast-Start Fault RecoveryOracle Support tells me that Fast-Start Fault Recovery is not available in 10g Standard Edition so I'm unable to set FAST_START_MTTR_TARGET. I'm confused because in my 9i Standard Edition iinstance I have the value set and can adjust it.
    Has anybody else run into this? Is there a workaround other than manually adjusting all the checkpoint-related parameters?

    In 9i, it's also not suppose to be working for SE
    Oracle either ignored the parameter or it's a bug not detecting the setting.
    http://download.oracle.com/docs/cd/B10501_01/server.920/a96531/ch5_edit.htm#66165
    You can use LOG_CHECKPOINT_INTERVAL instead
    http://download.oracle.com/docs/cd/B19306_01/server.102/b14237/initparams109.htm#REFRN10095

  • Oracle Business Intelligence Standard Edition 1 download?

    Hi,
    Apologies in advance if this is a daft question but could someone point me in the direction of the download link for Oracle Business Intelligence Standard Edition 1 11G for Windows 64bit?
    The white paper below dated 2010 eludes to there being an 11g version of this software but the download site only has 10g:
    http://www.oracle.com/technetwork/middleware/bi-foundation/obi-se1-11g-wp-187262.pdf
    http://www.oracle.com/technetwork/middleware/ias/downloads/101321biseone-095993.html
    I downloaded the Enterprise edition 11g in the vain hope that the installer would have an option for installing standard edition 1, which it didn't.
    This is a stupid problem to have but a problem nonetheless.
    All help gratefully received.
    David.

    Am I correct in saying that the Simple Install is Standard Edition 1? It doesn't say that anywhere (unless I'm missing it).Simple install is like a standard installation, less input is required from you.
    Oracle Business Intelligence Standard Edition 10g docs/downloads can be found at:
    http://www.oracle.com/technetwork/middleware/bi-standard-edition/downloads/index.html
    http://www.oracle.com/technetwork/middleware/bi-standard-edition/overview/index.html
    From http://www.oracle.com/technetwork/middleware/bi-foundation/obi-se1-11g-wp-187262.pdf you can see the following:
    The 10g version of BI SE One included a special installer and documentation tailored to the specific components that were available in 10g. For the 11g version of BI products, Oracle does not plan to release a special installer for BI SE One.
    Thanks,
    Hussein

Maybe you are looking for

  • Can't shut down my Mac desktop

    Ok, so I bought a Mac to get away from PC's, and only after two days of having it, I can't shut it down. I thought Mac's weren't supposed to have this problem. Here's the deal: I downloaded MS Office and then ran the software update. It said I had to

  • SAP PI7.31 : Mail with multiple attachments - how to process via UDF

    Hi wondering how I can approach this problem.   I have to read an Email with any number of attachments  - it can have between 1 and 4 or maybe more of different types (CSV,XLS,PDF,ZIP).  I need to read this email and extract the attachments to a fold

  • Document is alrady contains cleared items-reversal not possible

    Hi All, At the time of MIRO reversal we are getting error massage Document is already contains cleared items-reversal not possible actually one MIRO document using TDS line item and we make a payment for that TDS line item after that we try to reserv

  • Return statement executed before soapresult is set

    In my method i'm doing a soap call. The return statement is executed before de soapresultset is read. is there a way to "delay" the return statement

  • [EDGE E430C - WIN7 64Bit] Can't install my WAN (Ericsson H5321)

    Hi, I'am using a Thinkpad E430c. I'have installed all the drivers shown in this page: http://support.lenovo.com/en_US/research/hints-or-tips/detail.page?&DocID=HT073272 But Windows doesn't detect my wan adapter (even when i put a sim card) I've tried