Computer can't connect with firefox

Cannot get firefox to work on either of my computers. when I try to open, it says it can't connect. Internet Exployer works fine.

This is normally an indication of a Firewall blocking Firefox. For details on that and other possible causes see [[Firefox cannot load websites but other programs can]].

Similar Messages

TC joined network, but computer can't connect with TC

Easily got the TC up and running, successfully joined my existing wireless network- a solid green light. But when I tried to activate Time Machine, I keep getting the message "Connection failed- The server "xxxx" may not exist or it is unavailable at this time."
I waited a while, tried again. Same thing. Then I unplugged the TC, rebooted, and restored the factory settings on the TC. Again, successfully rejoined my wireless network. But got the same message.
I'd appreciate any thoughts....thank you very much

The Time Capsule performs no routing functions at all when it is configured to "join a wireless network". Therefore, the ethernet ports are not enabled.
In effect, when configured to "join", the Time Capsule simply becomes a wireless backup device and nothing more.
You might want to restart the entire network to see if the Time Capsule becomes available. You should be able to open the Finder and see the Time Capsule under the SHARED heading if it is successfully joining the network.
Message was edited by: Bob Timmons

I have an account for apple but this is not acceptable for i cloud. It say it is correct ID and password but this is not icloud account. So my phone can not connect with my computer and not synchronization too

I have an account for apple but this is not acceptable for i cloud. It say it is correct ID and password but this is not icloud account. So my phone can not connect with my computer and not synchronization too. Last a few months i have not use this phone. Just i start to use again. So most probably i gave my old mail address as a ID or password. So how can i clearing this subject. regards

ErolSinan wrote:
... there is no button for update between the About and Usage buttons in the General. ...
Correct. That is only a feature of iOS 5 or later...
ErolSinan wrote:
... yes my phone is 3G.
then it can only go as far as iOS 4.2.1

How can I count time that a computer has been connectted with the internet

I want to count the time which a computer has been connectted with the internet?
I had already tried several times,
one is socket,
second is Runtime.exec("ping -n 1"+ip)
I don't think they are better;
do you have another idea?

The internet is a conceptual entity not a physical entity so you are never connected to it.
As a conceptual entity the internet is represented by a cloud of computing devices (computers, gateways, routers, etc.)
Your computer connects to a another computer by being routed through various devices and then finally connecting to that remote computer.
Depending on various thing you can measure the time that you can connect to other devices by either pinging a common IP in the internet (such as yahoo.com) or by pinging the router that that represents the entry point for your cloud (such as the router/gateway of your ISP.)
If you are concerned about a particular connection, such a specific remote computer, then using a socket and sending a 'keep-alive' message and recieving the response is the best way to track that.

Can not connect with itunes with iphone but can connect with same password with my computer

I can not connect with Apple ID by IPhone but I can with same ID on my computer.

Read the article from which the thread was started.

I can not connect with pocket mac to my computer

I can not connect with pocket mac to my computer

I can not connect with pocket mac to my computer

Computer Can't Communicate With Printer

Hi,
After installing Win 8.1 on two different computers, both have the same printing problem.
The first problem that appears is "Bidirectional Support" must be enabled... It was enabled in Win 8 prior to the upgrade...
It took awhile to figure out how to enable it, as after every attempt to check the box, the check would disappear after closing and reopening the window.
It turns out that this won't work with the printer connected. After disconnecting the printer the setting will stick, and when the printer is reconnected it stays that way...
Unfortunately this doesn't resolve the problem... Now I get the error that the computer "Can't Communicate With The Printer"
Attempts to reinstall the software\drivers have been for the most part useless... Even after removing the printer in Devices and Printers and uninstalling the software\drivers, the Driver installer insists that the drivers are still installed and will only
"Update" them, or "Install Another Copy"... neither of which resolves the problem...
On one occasion, I was able to get a complete install, but only after doing a search through the Registry and Deleting everything that came up concerning the printer... This still didn't resolve the problem.
On one machine, after doing this, the Print Spooler would hang and run the CPU at 50% indefinitely. After playing around awhile, I found that if I turned off the Print Spooler in "Services" while it was doing this, and then restart it, the file
would actually print properly...
I have checked the settings in Windows Firewall, and everything for the printer is "Allowed". I even turned the Firewall off to no effect...
This is a Lexmark X5340 USB inkjet printer that works perfectly on the same machines when running Win 7 or Win 8 with all the same connections, software, drivers, and etc....
Is there something different with Win 8.1 than Win 8 concerning printers?

Hi,
I wanted to let you know that I've stumbled upon a way to get the Lexmark software\drivers to reinstall on the Win 8 to 8.1 Upgrade...
It has to do with the Print Spooler interfering with the uninstall\reinstall process. I had read about a recommendation to turn off the Print Spooler before uninstalling the software quite some time ago, and I had tried that, but it didn't work. Here are
the tricks to get it to work if it isn't too late for you.
Note: Bidirectional Support is needed, and for some reason the upgrade process turns it off. This may also be related to the Print Spooler....
1) Turn on and hook up your printer... This needs to be done just this one time to get it to show up in Devices and Printers.... Otherwise, all I get with my machine is the Lexmark Fax, and as a result, you can't "Remove" the printer.
2) Once the printer is visible in Devices and Printers, unhook it..
3) "REMOVE" the Lexmark Printer and Lexmark Fax (if you have one) in Devices and Printers.
4) Stop the Print Spooler in "Services"
5) Uninstall the software\drivers... In the process of doing this, I got a popup Security message from Windows Firewall concerning "Allowing" Printer Communication... I selected "Allow".
6) At the prompt from the Lexmark uninstaller, Reboot.
7) After rebooting, stop the Print Spooler again.
8) Reinstall software\drivers... I used both XP SP3 and Vista Compatibility Mode on different attempts, and both worked... Hook the printer back up when prompted by the installer.
9) Unhook the printer again and reboot. Bidirectional Support must be Enabled, and the setting won't stick if the printer is hooked up.. You need to reboot to clear things up before the next step.
10) Enable Bidirectional Support and Reboot. To do this, go to Devices and Printers and select "Printer Properties" and then the "PORTS" tab... The check box is near the bottom.
11) Set any Printer Preferences you use, if any, and it's ready to go.
I just noticed that when I right click on the Lexmark Preferences, Properties, etc., it is showing two of them for some reason. I don't remember that happening the first time I tried this, but I might have missed it.
I'll need to investigate that a bit.
EDIT... It seems the second printer doesn't show up until after Enabling Bidirectional Support...
I guess that makes a little bit of sense... two printers for two directions.
Thanks for the info. I found it was necessary to change the print spooler. You will also need to set another service that is used during printing that provides screen interaction for the print spooler. Make both of them automatic.

Deskjet Advantage 3540 (Envy 4500): Computer won't connect with printer during software installation

I just bought this printer and I am trying to install it by using the HP installation CD but I am running into difficulties to complete the process. The problem is that the computer won't connect with the printer (but my printer connects fine with my Wi-Fi network) and installation does not complete.
The HP software installation process appears to go normally (at least no error messages are shown) but when it gets to the part where it asks me how I would like to connect to the printer (Wireless or USB cable) I get an error message when I select Wireless Mode. My printer appears listed but as soon as I select it, a dialog is shown stating that "network installation could not be performed".
Below are the dialogs and what happens (text is in portuguese but you get the idea)
Dialog 1: selecting wireless connection mode
Dialog 2: printer appears in list and I select it
Dialog 3: Error message is shown, no further details
Here are some more facts:
(1) Printer connect fines with my Wi-Fi network: the connection details are correctly shown in its display (Wi-Fi SSID and IP 192.168.0.6) ;
(2) If I go to a web browser in my computer and type in the IP address, I can access the printer's webpage fine;
(3) I've tried uninstalling and reinstalling HP software;
(4) I've resetted my router;
(5) I've executed "HP Print and Scan Doctor" utility and it states my software hasn't been installed (which I don't understand) and it tries to download HP software and install one more time and I get to the error.
(6) If I go to "Start" menu, I can see the HP group is empty (installation only creates icons on my desktop). See picture below:
My OS is Windows 7 64 bit Ultimate (Service Pack 1)
EDIT: I've just discovered the inkjet Advantage 3540 and Envy 4500 appear to be the same printer, each target to a different market.
Help is much appreciated as I tried a lot of things to make this printer work wirelessly with my computer but without success.
Thank you,
Joao Pedro

Hi JoaoPedro,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
Sorry to hear that you are having installation issues.
To get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial product. You can do this at Commercial Forums.
Thank you for your time
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

Can I connect with more than one iTunes acct

Can I connect with more than one iTunes acct

Laxman25 wrote:
If its multiple apple id's on one computer you can't because you have to log out of one and login on another.
I've only got one ID so I can't test but Winston says you can be signed into iTunes with multiple AppleIDs (i.e authorise iTunes for more than one ID content) at the same time, and that even different account content will stream so long as Home Sharing ID in iTunes matches AppleTV Home Sharing ID.
AC

TNSping ok..can't connect with sqlPlus ...just stopped working

Hey Guys,
I have an Oracle Server running for the last year with little issues.
The lister just stopped working...
I can TNSPing ok...I just can't connect with toad or sqlplus anymore from another computer..
I can connect with sqlplus on the same computer...just not from any other computers.
=================================================================
C:\Documents and Settings\Phil>tnsping elvis 5
TNS Ping Utility for 32-bit Windows: Version 10.1.0.2.0 - Production on 17-JUL-2008 11:10:28
Copyright (c) 1997, 2003, Oracle. All rights reserved.
Used parameter files:
C:\Oracle\product\10.1.0\Client_1\network\admin\sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=7.7.1.1)(PORT=1521))(CONNECT_DATA=(SID=orcl)))
OK (70 msec)
OK (40 msec)
OK (50 msec)
OK (50 msec)
OK (40 msec)
C:\Documents and Settings\Phil>
==================================================
Listener status info
================================================
LSNRCTL>
LSNRCTL> status
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for 32-bit Windows: Version 10.1.0.4.0 - Production
Start Date 17-JUL-2008 10:45:26
Uptime 0 days 0 hr. 29 min. 2 sec
Trace Level off
Security ON: Password or Local OS Authentication
SNMP OFF
Listener Parameter File D:\oracle\product\10.1.0\Db_1\network\admin\listener.ora
Listener Log File D:\oracle\product\10.1.0\Db_1\network\log\listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROCipc)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=elvis)(PORT=1521)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=elvis)(PORT=8080))(Presentation=HTTP)(Session=RAW))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=elvis)(PORT=2100))(Presentation=FTP)(Session=RAW))
Services Summary...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
Service "orcl" has 1 instance(s).
Instance "orcl", status READY, has 1 handler(s) for this service...
Service "orclXDB" has 1 instance(s).
Instance "orcl", status READY, has 1 handler(s) for this service...
The command completed successfully
LSNRCTL>
LSNRCTL>
LSNRCTL>
LSNRCTL>
==================================================
Listener.ora
# listener.ora Network Configuration File: D:\oracle\product\10.1.0\Db_1\NETWORK\ADMIN\listener.ora
# Generated by Oracle configuration tools.
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = D:\oracle\product\10.1.0\Db_1)
(PROGRAM = extproc)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC))
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = elvis)(PORT = 1521))
====================================================================
sqlnet.ora
SQLNET.AUTHENTICATION_SERVICES= (NTS)
NAMES.DIRECTORY_PATH= (TNSNAMES, EZCONNECT)
====================================================================
tnsnames.ora
ORCL =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = elvis)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = orcl)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
=============================================================================
I am getting this error from sqlnet.log
Fatal NI connect error 12638, connecting to:
(DESCRIPTION=(LOCAL=YES)(ADDRESS=(PROTOCOL=beq)))
VERSION INFORMATION:
TNS for 32-bit Windows: Version 10.1.0.4.0 - Production
Oracle Bequeath NT Protocol Adapter for 32-bit Windows: Version 10.1.0.4.0 - Production
Time: 17-JUL-2008 10:23:14
Tracing not turned on.
Tns error struct:
ns main err code: 12638
TNS-12638: Credential retrieval failed
ns secondary err code: 0
nt main err code: 0
nt secondary err code: 0
nt OS err code: 0

LSNRCTL>
LSNRCTL> services
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=elvis)(PORT=1521)))
Services Summary...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:0 refused:0
LOCAL SERVER
Service "orcl" has 2 instance(s).
Instance "orcl", status UNKNOWN, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:0 refused:0
LOCAL SERVER
Instance "orcl", status READY, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:18 refused:0 state:ready
LOCAL SERVER
Service "orclXDB" has 1 instance(s).
Instance "orcl", status READY, has 1 handler(s) for this service...
Handler(s):
"D000" established:0 refused:0 current:0 max:1002 state:ready
DISPATCHER <machine: ELVIS, pid: 2284>
(ADDRESS=(PROTOCOL=tcp)(HOST=elvis)(PORT=1027))
The command completed successfully
LSNRCTL>

I'm an active subscriber for creative cloud photography plan. However, I can not connect with lightroom mobile. On my desktop app or on iPad app I get the message ˜trial expired˜. Please, what is going on?

I'm an active subscriber for creative cloud photography plan. However, I can not connect with lightroom mobile. On my desktop app or on iPad app I get the message ˜trial expired˜. Please, what is going on? Thanks for the help.

Does your Cloud subscription properly show on your account page?
If you have more than one email, are you sure you are using the correct Adobe ID?
https://www.adobe.com/account.html for subscriptions on your Adobe page
If yes
Some general information for a Cloud subscription
Cloud programs do not use serial numbers... you log in to your paid Cloud account to download & install & activate... you MAY need to log out of the Cloud and restart your computer and log back in to the Cloud for things to work
Log out of your Cloud account... Restart your computer... Log in to your paid Cloud account
-Sign in help http://helpx.adobe.com/x-productkb/policy-pricing/account-password-sign-faq.html
-http://helpx.adobe.com/creative-cloud/kb/sign-in-out-creative-cloud-desktop-app.html
-http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html
-http://helpx.adobe.com/creative-suite/kb/trial--1-launch.html
-ID help https://helpx.adobe.com/contact.html?step=ZNA_id-signing_stillNeedHelp
-http://helpx.adobe.com/creative-cloud/kb/license-this-software.html
If no
This is an open forum, not Adobe support... you need Adobe staff to help
Adobe contact information - http://helpx.adobe.com/contact.html
-Select your product and what you need help with
-Click on the blue box "Still need help? Contact us"

Itunes can`t connect with the ipad because it is blocked with a code

the thing is the following . I bought an Ipad and they connected it to the computer without synicing it with itunes so I could use it. I used it for a while and inserted a password. After using it I turned it off and when I got home it appears " Itunes can´t connect with the ipad because it is blocked with a code. Insert the code in the ipad to use it with itunes." The point is that I can´t even use it because it says to insert the password and the ipad says that I have to connect it to itunes so no password can be inserted so I can´t use my ipad

You need to start all over from the beginning. After connecting your iPad to the computer, look in iTunes for instructions how to "Restore as new."

Itunes can not connect with the Itunes store

Every time I try to connect to the ITunes Store an error pops up : Itunes can not connect with the Itunes store. I have downloaded the updated software and have access to the internet. Anyone ever run into this problem?

If it still has problems after trying the steps above, try resetting Winsock. It looks like it worked for a few people in this thread -> With iTunes 10.4 I can access iTunes store.
MTG68 wrote - In windows 7, click on your start menu, go to accessories, right click on the command prompt icon and choose "run as administrator". Once it opens, type in the following command...
netsh winsock reset
hit enter and it should say something like winsock reset successful now reboot your computer.

TS3694 My iphone has reboot loop and it can't connect with itunes.

My iphone has reboot loop and it can't connect with itunes. https://www.youtube.com/watch?v=bONKHhHlN78

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

When I am connected with Firefox I am hearing a background sound of a door opening and closing.

Starting about one month ago I have been hearing a background sound of a door opening or closing. When opening, it is the sound of a latch turning and then a creaking door sound, and when closing it is the sound of a slamming latch.It is intermittent, ocurring every 5-10 minutes or so when connected with Firefox. There is no apparent problem associated with sounds, I'm just wondering why it's happening and what it might mean.

Do you have that problem when running in the Firefox SafeMode? <br />
[http://support.mozilla.com/en-US/kb/Safe+Mode] <br />
''Don't select anything right now, just use "Continue in SafeMode."''
If not, see this: <br />
[http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes]

Computer can't connect with firefox

Similar Messages

Maybe you are looking for