Computer "dies" when start some programs

The computer "dies" and the screen turns off but the computer is still running.
This happens when I try to use gimp, FL studio (through wine), monopoly, volumeicon etc
I use fluxbox. Kernel version is 3.0-ARCH.
I have a Dell Latitude D531.
Graphic info:
01:05.0 VGA compatible controller: ATI Technologies Inc RS690M [Radeon X1200 Series]
Xorg.0.log: http://dl.dropbox.com/u/12215606/xorg

orrebo wrote:
The computer "dies" and the screen turns off but the computer is still running.
This happens when I try to use gimp, FL studio (through wine), monopoly, volumeicon etc
I use fluxbox. Kernel version is 3.0-ARCH.
I have a Dell Latitude D531.
Graphic info:
01:05.0 VGA compatible controller: ATI Technologies Inc RS690M [Radeon X1200 Series]
Xorg.0.log: http://dl.dropbox.com/u/12215606/xorg
I mean that the screen turns off but the computer is still running but close everything I think.
I was listening to music the last time it happend and the music died.
Here's the dmesg log: http://dl.dropbox.com/u/12215606/dmesg

Similar Messages

  • Once computer dies, when starting back up get "eratic" application message

    1st my battery has not been holding a charge for long at all. I charge it and it says that it is charged then I unplug it and it only last like maybe a hour. It used to last like 2 hours. It doesn't charge long either.
    Once is does die when I leave it on unplugged and I come back to use it I have to restart it totally. I used to be able to just move the mouse or hit the space bar and it would wake up and I could plug it in.
    When it does restart I get a message that says "Your computer's clock is set to a date before March 24th, 2001. This may cause some applications to behave erratically." Then it says someting about going to the Time and Date preference panel to change it. The funny thing is that once I click OK it doesn't do anything to the time and date. but several applications like iChat & Safari have been acting "erracically." Like iChat will start up in random places on my screen & i have to restart safari windows to get them to load.
    I got the Mac only a year ago so I don't know what is going on.
    Please if you have any ideas write me back, this comp. is my life since I am a graphic design major about to graduate. Thanks so much!
    iBook G4   Mac OS X (10.4.9)   HELP!!!

    AppleSyncNotifier.exe - unable to locate component. This application has failed to start because CoreFoundation.dll was not found. Re-installing the application may fix the problem.
    Do you have the MobileMe control panel for Windows, lizzie? If so, try uninstalling and reinstalling the MobileMe control panel. Does that clear up the message?

  • Fluxbox dies when starting some applications

    I instaled fluxbox and now I can start fluxbox using startx. I also generated menu using "fluxbox-generate_menu" but now as soon as I start applications like firefox, rox, opera, fluxbox dies and leaves me in console with differnt error messages for different clients and that the app has lost connection with xserver. However, few applications like aterm, gmplayer, starts up fine.

    For Christ's sake, then remove this version from the stable repo... I installed Arch yesterday after roaming in the Vista/Ubuntu world for a year or so - thought of getting back to fluxbox and the locale causes random Xserver shutdowns And pretty please don't be a troll with:
    1. change your locale
    2. use another wm

  • Entourage dies when starting up.  Error message: libSystem.B.dylib          0x9eaea0de  thread_start   34

    Entourage dies when starting up.  Error message: libSystem.B.dylib     
    0x9eaea0de  thread_start   34
    Any idea how to fix it?

    When posting please be more descriptive, at the very least what is needed is the version of MS Office for Mac you are running and the version of OS X installed on the computer. Also you should be posting your question on the MS Office for Mac product forums located at:
    http://www.microsoft.com/mac/support
    Entourage is a MS product so it only seems natural for them to support it.

  • Why does a new run once start up program run every time I start my computer? The start up program is coming from Reader XI. The only name on it is a number starting with 141_______.

    Why does a new run once start up program run every time I start my computer? The start up program is coming from Reader XI. The only name on it is a number starting with 141_______.

    See also https://forums.adobe.com/thread/1654402

  • Datasource problem - error 8 when starting extraction program

    Hello,
    we are using a datasource (data mart) to write data from one cube to another.
    When running the infopackage we get the 2 errors below. When testing with the extractor checker, everything was fine. Datasource was replicated, transfer rules are active.
    1. Message no. R3019 - Error 8 when starting extraction program
    2. Message no. RSM340 - Errors in source system
    more error info...
    " Error message from the source system
    Diagnosis
    An error occurred in the source system.
    System response
    Caller 09 contains an error message.
    Further analysis:
    The error occurred in Service API ."
    Has anybody any ideas?
    Thank you,
    Ruairi

    Hi Friend,
    Check the following OSS notes
    947690
    511475
    23538
    Even though the note 947690 is for process chain the steps mentioned in this note could cause Error 8 when scheduling a package for extraction. I think in your case the server name or the host name is incorrect. Check the host and the server name in TCODE SM51 and ask basis to look for the same in RFC entries using SM59 as well.
    Regards,
    varun.

  • Message "Error 4 when starting extraction program" with any extraction.

    Hi to everyone.
    We have a problem in a pre-existing BW system of development.
    When we start any extraction (for example 0MATERIAL_ATTR), the monitor give us the following error:
    ERROR 4 WHEN STARTING THE EXTRACTION PROGRAM (R3-19).
    I've checked the link between the two system, and it may be right. When I check the soursystem from BW I havn't any error.
    Then, when I test the extractor on R/3 with RSA3, any error as result and the tester extracts a lot of records.
    Anyone have any idea ?
    Max

    Thanks for your fast help.
    Claudio, the messages are only two ...
    - Error 4 when starting the extraction program
         R3     19
    - Errors in source system     RSM     340
    No dump on the R/3 and BW.
    Roberto, I've followed the note 325470 too, but the problem remain. Only one ... the note 147104 say ...
    "This server must be capable of starting a background process for data extraction".
    Is there a way to check this point ?
    Thanks in advance guys.
    Max

  • My macbook pro 13 inch when start ,some noise appears ! is it normal ?

    please help me . when my macboo pro 13 inch starts some noise appears . is it normal..? i want to by ear fone and external hard disk . please suggest me the brand name and shop ?

    chintupintu wrote:
    please help me . when my macboo pro 13 inch starts some noise appears . is it normal..?
    Probably.  my macbok pro 13" is 6 months old and makes some very small noises when starting up.  For example the optical drive makes a small noise on startup, but it is very brief. 
    i want to by ear fone and external hard disk . please suggest me the brand name and shop ?
    How much money are you looking to spend?

  • Powernowd cpu making noise when start some application

    When I start some application my cpu is making noise. Is this because of powernowd.
    I recently started using powernowd. Below is the default settings.
    powernowd: PowerNow Daemon v1.00, (c) 2003-2008 John Clemens
    powernowd: Found 2 scalable units:  -- 1 'CPU' per scalable unit
    powernowd:   cpu0: 800Mhz - 2401Mhz (4 steps)
    powernowd:   cpu1: 800Mhz - 2401Mhz (4 steps)

    Are you sure your CPU makes the noise. I've never heard that CPU's make any noise. Isn't it rather the fan which makes the noise? That could very well be the case, since powernowd is intended to adjust cpu frequency scaling, i. e. reduce cpu threshold if it is not needed. If you then start an application, the cpu may be forced into a higher threshold, which produces heat, so that the fans have to kick in in order to reduce cpu temperature.

  • Code shows on the left on computer screen when starting up then the computer restarts

    I was using my macbook pro 13" and my safari unexpectedly closed from there my laptop went off and restarted, when it started up, the progress bar never finished loading before it went off again, this happened twice and after that when my laptop started it showed some kind of code on the left side of the startup page where the grey apple sign is and would afterwards go off and repeat the same thing. I tried booting it into safe mode but it only refused and would do the whole code and restarting thing. Before this my laptop had a problem in which it didn't start up and showed a dim light when charging, I fixed it by opening up the back to unplug and plug the battery connector it was working fine for two days and started acting like this just this evening. I haven't had this computer for up to a year and haven't had any problems with it, I haven't dropped it or spilled anything on it before, it just started acting up and I don't know why. If anyone has a solution to what I can do to fix my laptop please share. Thanks.

    To save files you have to install the OS on another drive, like an external HD, and then try to copy or migrate files from the installed HD. Then yo can try to format the installed HD and reinstall the OS.
    However, the install HD may not be able to be formatted and you may have to replace it.

  • Palm TX problem: Soft reset caused by starting some programs

    Since I got my Palm TX I've had a strange problem. Programs that worked fine at first now cause the Palm to do a reset when I try to start them. first one program then another started doing this over a period of several months. At first I thought that there woas some kind of incompatability that for some reason only slowly became apparent. Now, when I tap the silkscreen icon for "Home" it causes a reset! Fortunately the home button does not do this.
    Any Ideas before this happens to all my programs?
    Thanks,
    Jim
    Post relates to: Palm TX

    Hello and thank you for using the Palm Help Forums!
    The use of incompatible 3rd party applications can cause looping and freezing to the Palm devices. If you can, remove the programs manually from your Palm and try to reinstall them to see if this resolves your issue. If you are unable to remove them manually, I would then perform a hard reset on the device. The hard reset will erase everything from the device so make sure you have everything backed up on pc via hotsync.
    You may want to see if the program(s) you are running have newer versions to avoid further problems. If problems persist, you may need to locate which program is causing the reset and not use it on the device.
    I hope this is helpful and let me know if you have any further questions.
    Post relates to: Centro (Sprint)

  • Computer dies when connecting Double Dragon All-in-One Driver

    I connected a DVD drive with the Double Dragon All in One Driver, via it's USB cable, to my Toshiba Satellite T115 S1100. I have done this numerous times before and there has been no problem. On this occasion I moved the power cable from the DVD to the power socket on the unit and as I inserted it the computer hard drive clicked and the computer went dead. It is now as dead as 'a dodo' and I assuming that there has been a power surge through the USB cable. Does anyone have any thoughts or have I 'toasted' the motherboard or some other part of the computer? Many thanks Peter
    Solved!
    Go to Solution.

    I contacted Toshiba, who were very helpful but were unable to suggest a solution, without seeing the machine.
    However, I took the battery out, whilst I was working on another laptop. When I returned and placed the battery back in, lo and behold, it came on and seems to be unaffected by whatever happened. So many thanks to anyone who may have viewed this blog, but the issue is solved.  Peter 

  • Sudden color temperature change when opening some programs

    I got this sudden color temperature change when I open Photoshop, Maya and a few other games. When I quit the programs the color goes back to normal. It first started happening once a while and I didn't really notice, but now it's become a regular thing... I think it begun after upgrading to Yosemite. It's quite uncomfortable to my eyes but it's bearable. I'm just concerned whether it's a sign for something worse. Please please help!
    I took photos of before and after the color change, basically it becomes much brighter and more blueish.

    Did you ever find a solution for this? It recently started for me too, and it's already getting on my nerves First I thought it was because of dynamically switching the graphics card but unfortunately it happens when I use it on an external monitor only (and thus is locked to the Radeon card)...

  • Why does my computer hang when starting up?

    Moc Pro 8 core '09 OS X 10.7. Computer was shut down and will not leave the apple spinning gray wheel screen to start fully. Cannot back either. Disk utility says everything's fine...but it isn't. Host cpu cannot index drive when used as a target.

    I got the Time Mchine to start and it's telling me that it will take 225 days to back up 231 GB of data. ??????
    What can I do to back up this drive???

  • I have instauled elements 12 from a disc when starting the program I got error 16 help please

    I have just instauled elements 12 from a disc, when I opened the programe it told me there was an error 16 and I should uninstal then re-instal and try agan.  I have followed these instruction and I am still getting error 16 after the second time of instalation.  Could please advise as what I need to do to get the programe to work

    if you mean exit code 16, you'll need to check your install log files, http://helpx.adobe.com/x-productkb/global/installation-launch-log-errors-creative.html
    http://helpx.adobe.com/creative-suite/kb/troubleshoot-install-logs-cs5-cs5.html

Maybe you are looking for