Condition VPRS not flowing to CO-PA

Hi Experts,
I configured condition VPRS in KE4I as I want Cost of Goods Sold to be transferred to CO-PA, and this information is availabe in a statistical condition in Billing Documents (we are implementing account based CO-PA).
During my simulations in KE4ST, the values for condition VPRS are not appearing in "Valuation Tab", only the values for Revenue and Tax conditions are appearing.
Our client has the COGS account created as cost element category 12.
Can you help me? Is there other configuration needed to flow values from VPRS to CO-PA?
Is the cost element cat 12 a problem when I want to derive COGS from VPRS?
I will not map this cost element in OKB9 for PA segment.
Kind Regards
Mayumi

I've checked in KEKF and it is active. This has been active before the addition of the new value field as well. Nothing has changed.
The transfer of values is based on sales and billing document. This is how it has been since we went live. So it is driven by the condition type and value field mappings in KE4I.
But the sales order details are not flowing to co-pa. My suspicion is that might have to do with the Material Cost estimates in test environment.
Please let me know if you have any other pointers.

Similar Messages

PO Condition value not flowing to GR

Hello Sir,
We have a custom PO COndition Type and Account Key for one of the costs on a material. Recently we had few examples, where the value in PO for that condition type is flowing, but the value is not flowing during GR.
Any pointers on how i should check this
Thanks
Balla

Hi,
You have a Condition Type & Account Key assigned in ( just cross check in M/08 t.code). Now check following options
Option-1:
Did that Account Key assigned to G/L account in OBYC with chart of account.
Option-2:
Check MR selected in filed RefApplicatio ( Reference application)in master data segment in that Condition Type in M/06 t.code
Option-3:
Check Condition type selected(Invlistcond) for internal costing in control data -2 in M/06 t.code
Regards,
Biju K

Conditions are not flowing from info record to PO.

Hi,
I have maintained the condition types P000 and JCOM(supplement octroi condition) in Inforecord.
But when i create a PO only P000 condition types is coming in PO not JCOM.
could you please exaplin the possible reasons?

Hello,
The Info record contains the time depended conditions, P000/PB00 condition mainatined is time dependent. JCOM depended on the PB00/P000 because octroi will calculate based base value + all the taxes ( on Total invoice value) as 5 % .
So you need to use JEXS condition in Pricing procedure and it will calculate all the conditions from taxe procedure and fetch total Taxes in pricing procedure and you can use subtoral and add PB00 and JEXS and calculate JCOM Octroi.
Regards
Mahesh Naik.

Import po jsec ,jecv,jadc is not flowing in excise capturing.

Hi guru's
i have an import po scenario.
I have done invoice verification for import po for all cvd, cess ,secc and additional custom duty.
during migo in excise tab only cvd condition is showing in bed but rest conditions are not flowing like
jsec ,jecv,jadc
1) i have correctly maintained the customs as vendor in po for all the conditions.
2) i have maintained condition in excise default (spro)as follows in tax inn
cvd=jcv1 ,ECS AP=jecv ,A/P AT1=jsce ,A/P AED=JADC
all above conditions are correctly maintained in import procedure.
even though only CVD condition flows in excise bed field
but JECV ,JSEC,JADC are not flowing in the remaining fields.
Is there any additional configuration left ?pls guide .
regards
raman patil

Dear,
As your CVD value is flowing in BED tab and others does not ( ADC and E Cess on CVD , SE Cess on CVD and ADC)
So just cross check Maintain excise defaults step again as explained in
http://wiki.sdn.sap.com/wiki/display/BPX/ExplanationforExciseDefaultsconfigforTAXINN
Here you will find 3 fields to be maintained CVD, ADC and E Cess on CVD (out of 4 )
Most importantly H E Cess on CVD you have to maintain as J1CV as it is hard coded in system so in your Import pricing schema name the Secondary and Higher Education Cess as J1CV
thats it and then check again

Excise consdition value not flowing inot the invoice

Dear Gurus,
Excise condition value not flowing in to the invoice from sales order
Thanks
Sasi

Dear lakshmipathi,
Iam entering the BED/Ed/ShEd values manually....
Where can I check the Tax code in the sales order?Does you mean to say the Tax classification at Item-Shipping tab?
Thanks
Sasi

VPRS cost not flowing when plant is changed

Hi all,
I have a scnenario where :
1. The customer places an order to a Sales org 1000 whose company code is 1000.
2. The goods are to be delivered from plant 2000 which belongs to company code 2000
3. Material X is present in Plant 1000 and has been extended to Plant 2000
4. The assignment of plant 2000 to sales Org 1000 and DC 10 exists.
5. When the user enters plant 2000 in the sales order item level the VPRS cost does not flow into the order, but if he enters the plant 1000 (which is assigned to compnay code 1000) at the item level the VPRS seems to flow perfectly well.
6. I checked the pricing analysis. It shows ( when user enters plant 2000) requirement 004 is not met.
One of the conditions requirement 004 checks is that the valuation Areas (Plant 2000) company code and the sales organizations (1000) company code should be same. Does this means that I have to assign plant 2000 to Company code 1000?
My question is that is it necessary for the valuation Areas (Plant 2000) company code and the sales organizations (1000) company code should be same for VPRS to flow? Isn't the assignment of plant 2000 to sales Org 1000 and DC 10 enough for the VPRS to flow?
Is there any other setting that is required or am I miising out on some setting.
Please help.
Thanks and Regards,
J Nagesh

Hi,
Your scenario is inter company sales
When you selling it from company 1000 and sales orgz 1000 and plant 1000 VPRS update
But when you deliver it from plant 2000 it becomes inter company at this stage VPRS will not appear rather is will update PI01 or PI02 condition and this become cost for company/sales orgz/plant 1000
Kindly see price procedure RVAA01and see intercompany condition and vprs conditions
Kapil

PO Conditions not flowing in MIRO

Hi,
This is a case of Import Purchasing where Invoice Verification (for Custom/CVD) is done before goods receipt.
It is observed that in the screen MIRO the condition values (for duties of Custom/CVD) are not flowing from PO although values are maintained in PO. Amount and quantity need to be entered manually in MIRO in this case.
Is this a standard behaviour of SAP that if IV is done before GR then condition value doesn't flow from PO and need to be entered manually in MIRO? And is there any way out / work around in order to get the condition values flown from PO to MIRO if IV is done before GR?
Can any one assist in getting this query resolved?
Thanks in advance

yes, this is the standard behaviour. In import procurement we need to enter manually the value of conditions.
No, there is no any customization through which we can get the flow of value automatically.
But, u can drag the value and qty of conditions---
when u will do IV against the layout of PLANNED DELIVERY COST, there u will find the right side two columns Recieved QTy and Value. from that columns, u can drag the value and qty.
thanks

SERVICE ORDER COST IS NOT FLOWING TO CONDITION TYPE EK01 IN SALES ORDER

hi all,
My requirement is that the cost incurred in service order should flow to the condition type ek01.
we will be running the transaction dp90 to calculate the cost for the resources used.
the cost are getting calculated at service order level but this cost are not flowing to the billing item being generated from dp90 in the billing request.
the settings that i have made are as follows: I have maintained the condition type ek01in the sales pricing procedure. are there any other settings required by me to make.
valuable answers will be be rewarded fullpoints.
regards,
ashish

Hi prince
Check out in Control data of Condition Type--PB00..Enter "NO Limitations" in Manual Entries. and check the 'Amout' and 'Value' and 'Delete' so that u can make changes to that condition type in line item in sales order.

%age entered in the Info record condition type is not flowing to the PO

Dear SAP Experts,
I have created a condition type ZCV1 by copying the condition type JCV1. But, if I enter the percentage in the JCV1 in the Info Record, it flows to PO, but, the percentage entered for ZCV1 in the inforecord is not flowing to the Purchase Order.
Request to provide solution for the above problem.
Thanks in advance.
Regards,
Muthuraman.K

Sorry , Double Post

Additional VAT condition type is not flowing to PO

Dear All,
            An additional tax of 1 % is levied in State of gujurat and for this we can take the credit . It behaves exactly like VAT like it calculates its value as 1% of base amount and excise duty levied on it . But this condition is not available in standard TAXINN procedure . So we created a new procedure copying from TAXINN .We created a condition type copying from standard condition type JVRD that is for VAT on which we take credit .Then we assign this condition type to tax procedure immediately below condition type JVRD and it should calculate the value in the same way as that of VAT .Then we assigned this procedure to India , assigned all the condition types in CIN config and maintained default condition types for this procedure copying from TAXINN .
            But while we are creating a PO after that ,this additional tax condition type is not flowing in it .
Can anybody let me know where is the missing link in this customisation .
Regards
Abhijit Das

Hi AP ,
         The condition type is Valid from : Todays Date and valid to 31.12.9999 . Is there any problem with this ?
Abhijit

Cost of Goods Sold not flowing to CO-PA

Dear Experts,
I have assigned VPRS (statistical condition type) to CO-PA value field in KE4I,but when I create billing document,the COGS value is not flowing to COPA.
Can anybody help me as WHAT is missing in configuration for not flowing COGS to CO-PA?
Treat it very...... .
Regards
Su

Hi,
Can anybody explian the logic behind the documents triggered by the system in the following scenarios?
At the time of PGI:
COGS A/c Dr to FG Stock A/c (Accounting Document)
COGS A/c (CO Document and No COPA Document)
At the time of Billing
Customer A/c Dr to Sales A/c (FI Document)
Sales A/c-PSG for Sales A/cs (CO Document)
All the line items relating to Sales Revenue (CO-PA Document)
So finally in FI under P&L,COGS A/c in Debit side and Sales in Credit side appears as Customer and FG Stock comes under Balance sheet.
The above said entries are correct and Standard SAP behaves the same.
Regards
Su

PS: WBS is not flowing for a Material, while creating delivery from Project

Hi,
While creating delivery from Project thro CNS0, WBS is not flowing for a Material in delivery, in turn WBS is not flowing in Billing document for same material, in turn not allowing to Post the Billing document to Accounting.
Error while releasing Billing to the Accounting: Accounting Entry is not generated. Error Message:Assign Condition type
YMRG in COPA.
Pls let me know, what can be the reason ?
Thanks.
Amit.

Hi Kuldeep,
Check this note,
Note 159387 - Message BP603: incorrect line item is displayed
Its valid only till 4.6. Might give you some idea but.
Regards,
Gokul

The value of JMIP ( inventory BED) and SEcess( JSEI) is not flowing in MIGO

Dear Friends,
The Value of JEC2 is flowing in MIGO but the value of JMIP and JSEI is not flowing in MIGO excise invoice tab.
Please suggest me the possible reasons.
Regards,
Balakrishna R.V

hii
Your requirement is for Non deductable or deductable duties ??
If its deductible , then u shld not maintain in NVV in conditions .
IF its non dedcutible then u have to maintain in NVV , then it won't show any break up duty calcualtion in MIRO.
Ther in MIRO it will show u total amount it taken into account of materials i.e , inventory account .
Hope it'll help u .
IF not revert with detailed process how u r doing with procurement type .
Thanks

Excise Duty Base Amount not flowing into ARE -1

Dear Friends,
While Iam creating ARE-1 for the Exports Excise Invoice - Excise Duty Base Amount not flowing into ARE1
thanks
Sasi

Dear Lakshmipathi,
Earlier Liable to AT1 is ticked but not Indicator NCCD,I have checked after ticking the NCCD as well....
In my pricing procedure i dont have the NCCD condition .....as its not required.
In classify consditiontypes: I have maintained PR00 condition type as well along with Excise condition types...Do i need to maintain this PR00 anywhere else
or
Is there anything I need to do with the assesable value.......if so how should be the entry like in the pricing procedure?
Can someone please provide me the solution...its very urgent
Thanks
Sasi

Excise duty values not flowing from PO to MIGO

All SAP Gurus,
We have created a PO and used excisable tax code in it.
Excise duties are calculated correctly in PO.
When we go for Goods receipt against the PO, excise tab appears, but there are no values in excise fields (fiels are blank).
System allows us to enter the Excise duty values manually.
Further excise entries and register updates are happening correcetly.
We do not undersatnd why the Excise duty values are not flowing automatically from PO to GR (MIGO).
Please help.
Regards,

hi
chekc following
path: spro>logistic general >tax on goods movements>india >basic settings>determination of excise duty >maintain excise defaults >
here give appripriate conditions for ur procedure as per BED cess and other
regards
kunal

Condition VPRS not flowing to CO-PA

Similar Messages

Maybe you are looking for