Conditions from contract to PO

Hello,
I want to create some HEADER conditions in a contract. This condition is a PERCENTAGE condition.
So i want for example when the release order is from 10-20 euro to have discount 5%, from 21-50, 7% etc.
What is the appropriate customiizng for that?
Thank you.

hi
u can use the % condition of discount
R003
tick for the header in M/06  in condition R003
now just add this condition in the schema ur using for ur contract
now if u want the values as 5 % or 7 % then create inforecord and maintain scales for this condition
hope it clears
regard
kunal

Similar Messages

  • Copy Header Condition from contract to order

    I have a question,
    In our scenario we have contracts that are neither value based nor qty based. They are mostly dummy contracts which hold some data in custom created views of the contract header. We have copy routines that fetch this data and transfer to the header of the sales orders.
    Question is:
    In Pricing, when a header level condition is created at the contract level for an item and when the item gets copied to the order what happens is:
    e.g  Item 10.      header condition: 5% VAT (500 Rs)  when it gets copied to SO  at the header level of the order it shows VAT (500 Rs).
    The percentage does not appear. Would you know why this occurs.
    Thanks!
    Natasha
    Message was edited by:
            Natasha

    Hi,
    FIRST OF ALL YOURS SUBJECT AND THE DETAILS ARE ENTIRELY DIFFERENT.
    coming back to yours query:
    In item level only you'll get the entire detail pertains to item conditions, check whether you have the condition type with header level? if yes then it will show the details in header level.
    Your e.g shows that you have item level condition not header level.
    Please check

  • Copying Conditions from contracts to follow up transaction

    Hi all,
    The scenario is I am maintaining some condition types in the price agreement tab of an individual contract at item level. I want to use these maintained condition types in the pricing procedure of the follow up document i.e. I want the pricing proc. of the follow up doc to read the condition records for the corresponding condition types that were maintained at the contract item level.
    In "copy control in business transactions" customizing I have maintained "copy price agreements" for both src and target transaction types and item categories respectively.
    Kindly help me out!
    Regards,
    Roy.

    Hello,
    You should maybe use the BADI 'CRM_COPY_BADI' to make your own copy control.
    Regards,
    Frédéric

  • Condition Type is not copying from contract to sales order

    Dear All,
    The value the i am giving in the sales contract is not copying into sales order. Sytem again asking to enter the value.Is there any setting to be done forthat.
    Regards,
    Suresh Yadav.

    Hi,
    If the *CONDITION VALUES* are *manually* entered then the values will not be copied from the *SOURCE TO TARGET* document
    Please check in the  Contract whether the vales derived from Condition records are entered manually.
    If you want the prices to be copied automatically then they have to maintained through CONDITION RECORDS in *VK11*.
    Please maintain the CONDITION RECORDS and check whether they have copied or not
    Please also cehck the COPY CONTROLS from CONTRACT to SALES ORDER in VTAA transaction -- at item--->pricing type. and set it a s  D
    Please check the above settings and let forum know the feedback.
    regards,
    santosh

  • Error during PO creation from contract

    Hi all,
    my requirement is to change the Handling type field of that purchase order that is referred from contract using the BADI ME_PROCESS_PO_CUST and Method PROCESS_ITEM. but i am getting an error message " Data from Business Add-In ME_PROCESS_PO_CUST not transferred successfully " . but when we are pressing ENTER this error was by passed.
    This error is occuring only when i am trying to change the Handling type field.
    This error does not occur when i am changing the Track number.
    Note: i am trying to create a PO that is referred to a contract.
    Thanks.

    Hi Santosh,
    362 is not maintained for BASB,but its maintained for condition type JMO1(IN:A/P BED Deductable) & JMO2(IN: A/P BED non deduct )in <b>AltCTy</b> field.
    And For BASB 605 is maintained in the field AltCBV.
    Can you Pls explain the significance of this alternative calculation type.
    Regds

  • Price is not Picking from Contract while making PO

    Hi Gurus,
    Value Contract for services is created, While making the Purchase Order the price is not picking.
    Note:-The Contract is in Valid Period only.
    Can any one tell me what reasons may be there.
    Regards,
    Prabhakaran M

    As a std procedure while creating PO price won't be picked from contract.  Rather you need to create a PO w.r.t the contract. In that case PO will take the same conditions stored in the contract.
    Else if you are working with sourcelist, then you need to define the contract as a source of supply.  In this case when you create PO system will pick Contract as source and contract price will appear in PO.

  • Why is information defaulting from Contract and not from PIR in the PO?

    Hi Gurus,
    As far as I knew, the information in the PIR (Purchase Info Record) should get importance, while getting defaulted into the PO. The planned delivery time in PIR is different than that in the material master and the price in the contract is also different from that in PIR. Now, when I am creating a Standard PO (doc type NB), and putting the contract and line item in the outline agreement column, and hitting enter, the price is pulled up from contract. Although, I can see the info record in the correct column, but price is not defaulting from there. Again, the delivery time is calculated based on the planned delivery days in the material master (GR processing time = zero) and NOT from the Planned delivery time value in the Info record.
    I think, I am doing something wrong or there is something wrong in my understanding. Please help.
    Thanks,
    Kumar

    Hi Kumar,
    If there's 2 source in the PO (Contract and Info record), the system will take the source from Contract, as its SAP standard design that contract has a higher priority then PIR. To make sure it, check to your Contract document as well , if the info update is updating the condition or not.
    You can perform a simple test also, create a PO with only PIR and a PO with Contract and PIR, you will see the difference.

  • Regarding pricing not picking from contract while creating service entry

    hello,
    we are facing a problem -we have created a contract with a service item and made a purchase order with the same reference as well. problem starts while creating service entry sheet while adopting the services its not picking the rate from the contract. please guide us how to proceed further.
    thanks,
    ritesh

    Hi Ritesh,
    please check the pricing date in the contract service item and also in the entry sheet header. The price could be probably not found due to different validity of the pricing condition in contract - the price from the contract is not valid on pricing date of   the service entry sheet.                                                                               
    The price in SES is determined on the base of the value in the                        
    field 'Price Reference Date of Entry Sheet' (ESSR-LBLDT). This field                  
    is located on 'Basic data' tab.                                                                               
    However, enhancement SRVESSR (customer exit EXIT_SAPLMLSR_010) can                    
    be used for changing this behaviour.    
    Regards,
    Edit

  • Net weight of the material is not copying from contract to sales order

    net weight of the material is not copying from contract to sales order?
    plz help me

    Hi,
    If the *CONDITION VALUES* are *manually* entered then the values will not be copied from the *SOURCE TO TARGET* document
    Please check in the  Contract whether the vales derived from Condition records are entered manually.
    If you want the prices to be copied automatically then they have to maintained through CONDITION RECORDS in *VK11*.
    Please maintain the CONDITION RECORDS and check whether they have copied or not
    Please also cehck the COPY CONTROLS from CONTRACT to SALES ORDER in VTAA transaction -- at item--->pricing type. and set it a s  D
    Please check the above settings and let forum know the feedback.
    regards,
    santosh

  • Modification in copy control from Contract to Sales order

    Hello Gurus...
    We are using a standard copy control routine to copy header and item level data from Contract to Sales order.
    Now what happening is the price for some items is changing after creation of contract. But when the sales order is created it is copying old value from contract.
    I want to modify the routine in such a way that I can redetermine the price for the item.
    I can not change configuration as the same is used by multiple company codes and the change is required only for some company code.
    Any suggestions please?

    Hi there,
    You have do some customizing in the pricing type at the copy controls in item level.
    Define a copy control routine at the item level in VOFM. In the routine put a condition that the system should read the value in the pricing type. As per your requirement if the company code / sales org is 1000 / XXXX for eg, then the system should apply the pricing type that will carry out the new pricing at the order (I am not connected to SAP right now so not sure what that pricing type is). If the company code / sales org is apart from 1000 / XXXX, it should default the pricing type that is there in standard copy control VTAA.
    Check if that is possible with your ABAPer. What I feel is that you have to hard code the pricing type value (that will carry new pricing) in the new copy control routine.
    Regards,
    Sivanand

  • Invoice -add data from contract

    Hi,
    I would like to add details to invoice script from conditions in contract, details that didn't appear in standard invoice, details like commons, calculate object est.
    I didn't found connection between tables VIRAINVITEM- RE Invoice Item and VICDCOND-conditions.
    Can anybody help me?
    Thanks
    Ifat

    Hello Christian,
    Thank you for your answer, I almost gave up.
    I saw you answer but something is missing:
    1. Why table VIRADOC is necessary it's not connecting to other table?
    2. Between VIRAINVITEM and VIRADOCITEM the connection is 1 to many,
        I need 1 to 1 relationship between lines in invoice and table VICDCOND.
    Maybe there is another why to bring data to invoice, data from adjustments and conditions comments.                              
    I would like to attach file with the draw of tables and connections, but didn't found this option in the forum.
    I hope that you will understand my questions.
    Thank you
    Ifat

  • Move RE cost from Contract No to Building/Property within RE module instead of FI

    Hi, RE experts:
    Our company's process moves costs from contract to Buildings/Properties by posting a FI document that will debit to Buildings/Properties and credit to contract nomber.
    Is there any way to move the cost from contract to Buildings/Properties within the Real Estate module instead of posting FI documents?
    Thanks,
    Jenny

    Hi Jenny,
    As per my understanding through a REFX contract you can make the FI posting entries, at the same time you can define the objects as per your cleint requirement, for those objects you can distibute the charges / conditions what you are paying through a contract.
    In your case you want to flow the costs to Building, so try to assign the building in the RECN Contract in Objects Tab, (instead of rental object).
    While adding the conditions in the contract ( conditions tab ) try to select the Building and for that you can assign the conditions.
    To assign building in contract ( Objects tab ) you may need to do the foloowing configuration as below.
    SPRO - Flexible Real Estate Management (RE-FX) --> Contract --> Objects --> Permitted Object Types per Contract Type -->  you can select your contract type and assign it to building, so that it will allows you to assign the building in contract.
    ( Attached screen shot FYI ) .
    After assigning in contract - conditions tab - simulation mode - you can see the object cash flow ( against your building  & partner related cash flow ).
    Thanks & Best Regards,
    Subbarao.Narne

  • Price during PO creation (copy from contract) is changeable

    Hi all,
    How can i configure as such price during creation of PO which is copy from a contract is not changeable?
    Thanks.

    friend
    that is determination of pricing procedure. setting is done in SPRO-IMG-Materials management-Purchasing-Conditions-Define price determination process-Define Schema determination.
    You have a opition of copying of the values from Contract to PO into say from ZB00 to PB00
    Condition type PB00 (maintained using tcode m/06) maintain ZB00 as an access sequence.
    Manintain condition records to condition type PB00.
    SAP Enjoy
    Regards

  • Price and condition in Contract management SRM 7 version

    Dear supporters,
    We work SRM server 550,
    We use the contract management. 
    In SRM 5 SEREVER 550 if you use condition in contract item the price donu2019t present in the lines items and the system present the words "see conditions".
    We consider the upgrading to SRM 7 end we need to know if in this VER' the Contracts present the item price when you using condition in item line.
    Thanks
    Isiaki

    Hi
    the price has more than one prices and you have to click see conditions and see
    orSRM tables;-
    1)       Take the GUID from CRMD_ORDERADM_I table
    2)       And input that GUID to /1CN/CBPSAP016 table
    ECC tables: -
    1)       A016 (Input GOA number and item number)
    2)       You will get KNUMH numbers
    3)       Enter KNUMH numbers in KONP table
    4)       You wil get all the pricing condition details

  • Shipping conditions in Contracts not copied over to sales order w/ref

    In standard SAP the shipping conditions are pulled in from the Sold-to party's customer master unless the shipping conditions are hard coded in the sales order type, in which case they overrule the shipping conditions of the sold-to.
    A client enters contracts (CQ) with their customers and creates sales orders with reference to these contracts. The shipping conditions within these contracts are different from those on the Sold-to master record. The client wants the shipping conditions from the contract to flow through to the sales orders created with reference to the contract (instead of the system currently getting them from the sold-to). I do not believe this is standard functionality but I want to be absolutely sure before I respond to the client and tell them that we will have to create a custom routine in copy control to achieve this from the contract.
    Other than tweaking copy control routines is there any way the system can be configured so that the shipping conditions from the Contract (CQ) header get pulled in when a sales order is created with reference to the CQ contract?
    Any help/suggestions would be greatly appreciated.
    Thanks,
    SJ

    Hi,
    Whatever be the shipping conditions in contracts that can be flow to sales order,
    Please check your input, if you mentioned in sales document then remove from there - VOV8
    Also check in copy controll - VTAA
    CQ  to OR  at header level
    Copy requirement - 001
    Tickmark to complete refrance
    Kapil

Maybe you are looking for

  • I've been trying to update iTunes to 10.3 for a while now and I keep getting the following message:

    The path 'C:\Documents and Settings\HP_Administrator\Local Settings\Application Data\Apple\Apple Software Update\iTunes.msi' cannot be found.  Verify that you have access to this location and try again, or try to find the installation package 'iTunes

  • Too Many Prints From The cmn_err

    Hi All, I need some help and pointers regarding driver programming on solaris 10 kernel. I have a module that has been ported in the kernel space. And I have changed all the printfs to cmn_err as the simplest logging mechanism and it prints the messa

  • Struts/servlet page flow problem due to j2ee security

    Whe I type url such as http://localhost:7777/myapp/action.do, I want to see the execution result page from this action. However the result page will always be index.jsp because j2ee security which I have a loginaction.do and its result page is index.

  • Print JTextPane as vectors, not as bitmaps?

    Hi, I'm working on a small Swing application that allows to arrange elements like pictures, vector graphics and texts on a page and prints them. I use JTextPanes to display and print text frames. Everything works fine - but when I print (on the print

  • The audio out (headphone jack) stereo just stopped working.

    The audio out (headphone jack) stereo just stopped working. On all my head phones (which work fine on other devices), macbbok pro sound is only coming through the left speaker. Anything I can do about this, aside just bringing it in to the shop? btw: