CONFERENCE CALL IN ATA PHONE

Hello all,
I need to configure two telephone that are attached on FXS card to make conference call.
Somebody know how can i to configure this feature?
Thanks,

Hi, first need to add the ATA as a SCCP device. CCM Page->Device->Add New and select ATA. Then you can configure both FXS ports like IP Phones, you can assign then partition, CSS, MRGL and others parameters.
This link can help you to configure the initial values of the ATA.
http://www.cisco.com/en/US/products/hw/gatecont/ps514/products_configuration_example09186a00800a892f.shtml
Hope this help.
David

Similar Messages

  • Hi iam using iphone 5s which is locked to EE carrer. I am not able to make a conference call using this phone in india

    Hi iam using iphone 5s which is locked to EE carrer. I am not able to make a conference call using this phone in india

    then call EE if they are your carrier

  • What are the "Conference Calls" when you reach level 4?

    What are the "Conference Calls" once you reach level 4 on the Apple Support Communities? You can find the "Conference Calls" perk here:
    https://discussions.apple.com/static/apple/tutorial/reputation.html
    Any help would be greatly appreciated.

    Hi Austin,
    https://discussions.apple.com/static/apple/tutorial/reputation.html
    Level 1  0-149
    Level 2  150-499         Report Post
    Level 3  500-999         Custom Avatar
    Level 4  1,000-3,999     Conference Calls
    Level 5  4,000-7,999     User Tips
    Level 6  8,000-19,999    Lounge Access, MVP Meetups
    Level 7  20,000-34,999
    Level 8  35,000-49,999
    Level 9  50,000-79,999
    Level 10 80,000+
    Level 1: nothing.
    Level 2: ability to report posts for non-compliance with the Terms of Use (or perhaps someone showing personal details).
    Level 3: custom avatar
    Level 4: Conference calls. I am not holding my breath. I have not been invited yet.
    And if a conference call means a phone call, Australia is +10 hours UTC (as in 10 hours ahead of Greenwich Mean Time, London, UK). I don't expect to be invited.
    If you enjoy reading questions and answers in these forums, keep doing it. As you read and learn, you will find: "Hey, I can answer that!" and the reward comes from the thanks, not the points.
    Regards,
    Ian

  • HI I have an Iphone 3GS and the microphone jack works when I play music but not when making phone calls.   please help as I use it for conference calls

    Hi   I use my phone for conference calls and use the microphone jack to connect to speakers.      It doesnt work when making phone calls but when i play music on the phone the jack works with the external speaker.   

    Happy to have been of help. Hope all goes smoothly.
    BTW, for the sake of others who may help you here, it's usually most polite if you mark the post that answered your question as being the one that "solves" it, not your own post. That's how people get points here, if a questioner marks their post as either "helpful" or "solving". It's not an issue for me, but for those just starting out in the forums it may be important to them. See:
    https://discussions.apple.com/static/apple/tutorial/mark.html
    and
    https://discussions.apple.com/static/apple/tutorial/reputation.html
    Regards.

  • Verizon - Iphone 6 plus - phone app getting hanged while doing 3 way conference call

    I am using VOLTE in IPHONE 6 Plus with IOS 8.1 and when I am trying to do 3 way conference: I called person A and then I add person B, then I see the following issues:
    I press Merge calls and calls are merged but still merge calls & Swap icon is enabled.
    When person A/B hangsup, the phone app is hanged and call is ended but it still shows that phone is ending.
    If I end the call, still the phone app is hanged and it shows it is ending.
    I cannot do any dialing in the phone when phone app is hanged and literally, I have to restart the phone only.
    Any other person cannot call me and it goes to voicemail.
    All the above issues were happening in IOS 8 and IOS 8.0.2 also. I did reset network settings too but it did not help.
    Can someone give an idea for any solution.

        mehulkothari,
    Thank you so much for those details. I want to make sure that you are able to use the feature without any issues. One thing that we might want to check out is that all the people that are a part of the 3 way calling is in the Verizon 4G LTE network. This could cause some issues if they are not. Have you been able to power the device off all the way and also remove the sim card for a good 10-15 seconds? http://vz.to/1EdNNMe  Please keep us posted.
    KevinR_VZW
    Follow us on Twitter @VZWSupport

  • My phone goes silent in conference call, but others can still talk??

    When I start a conference call, after a random time period my end goes silent, but the other callers can hear eachother. What's going on?

    Have noticed this problem as well and the work around seems to be to enable Accessibility Mode/ Assistive Touch.  With this on you do get the transparent little button floating around the screen, but you will then find your phone rings when it should.  To turn the volume on of off use this and then chose Device. The icon is a bit counter-intuitive as it will show Mute with the diagonal arrow (meaning press to mute the phone).  If the icon shows Unmute, then your phone is actually muted and will not ring.
    So far this is the only solution I have found.

  • Using Hookflash to set up conference calls in CUCM 7 with a Sip Phone

    Hi all,
    Not sure if I'm going the right way about this or if this is even possible, let me start by setting the scenario:
    We have Cisco Unified Call Manager 7 and have recently installed an non Cisco IP based telephone in a boardroom which we have successfully registered to the Call Manager using SIP.
    We would like to be able to setup audio conference calls from this SIP phone. It has a flash (hookflash) button which I believe can be used for this very purpose (it signals and offhook/onhook/offhook condition) which can be used to instruct a voice switch that it is requesting services (like conferencing).
    However I'm strugging to see how to set this up.
    Can anybody offer any advice on this subject?
    Regards,
    Martin

    SG
    Just an update to the question that I presented when I started this thread.
    You really never did say what type of a User Account you are using in your Premiere Elements 8.0/8.0.1 on Windows 7? But based on the information provided by several users, User Account with Administrative Rights seems to be the way to go since all of them were using it and had systems that were running well. I would have expected that based on the Premiere Elements Windows XP requirements. I have yet to have someone come forward to say that they are using Premiere Elements 8.0/8.0.1 on Windows 7 with a User Account with Standard Rights and the program is running well. Will you be that one?
    Besides me switching from Windows XP to Windows 7 in the near future, what motivated this line of questioning was the report that I had seen of a user with Premiere Elements 8.0/8.0.1on Windows 7 who was reporting "permission" error messages when trying to archive a project with the Project Archiver (Archiver "Trimmed" and Copy options). Further questioning brought out that the problem extended to the AutoSave feature as well. The user claimed to be saving to an external hard drive (formatted NTFS) with about 800 MB free space. And still further questioning brought out that the error message included a free space and/or permissions error. Yes, there were extremely large file sizes involved here (way over 4 GB)
    The story had a happy ending where the remedies were:
    1. User Account with Administrative Rights
    and the major
    2. Formatting the thought to be NTFS external hard drive from FAT32 to NTFS.
    ATR

  • How many phone lines can i add to my conference calling feature.

    How many phone lines can I add to conference calling on my iPhone?

    That depends on your cellular carrier. Ask them.

  • Why is my phone beeping on conference calls?

    There is a beep on my HTC M8 during conference calls. How do I turn this off?

        Medicinewomon We surely don't want your conference calls to be interrupted. Does this happen when another person is calling you while you're in the middle of the conference calls?
    Sheritah_vzw
    Follow us on Twitter
    @VZWSupport

  • Is there a conference call/speaker phone made that is supported by iPhone?

    Is there a 'conference call accessory available for iPhone that will provide good sound, in and out, in a small conference room?

    I've not tried it yet, but some of my colleagues swear by the Jambox (by Jawbone) as something that works not only as a speaker but also as a speakerphone. It connects via bluetooth.
    I'll probably borrow one for my next call and see if it works as well as they claim ;-)

  • Problems with conference calls(adding and merging calls) after upgrade to ios 8.1.2 on iphone 5s

    I am having weird problem intermittently with adding calls or merging them or swapping them. The issue happens 8 out of 10 times whenever I try to do a conference call. This issue came up after I upgraded to 8,1.2. Never experienced this in 8.1.1 or previous version.
    Some of the scenarios that I have experienced is:
    1. While on the call, when I try to add a new contact, it just doesn't dial the second number.
    2. Sometimes the second number gets dialed, cannot merge the calls.
    3. After talking to the second person, cannot go back to the first call.
    I am very sure that this is not a carrier issue as it worked flawlessly before upgrade.
    Anyone experienced this before? Any suggestions?

    Thanks for the above infromation. I did a complete restore of my iphone through iTunes connecting it to my computer via cable. iOS8.1.3 was re-installed. I then added back my settings and data which were backed up prior to restoring the phone. I still have the same issue with conferencing and adding a third caller. When I hit the [+] box, the existing caller is not put on hold. The phone appears to be making a call but it is not dialing to the 3rd party. Shortly thereafter, the Merge icon appears but there is no active call to merge with. I have tried this several times using my wife's iPhone and our home phone to set up a 3-way call. I know it is not working because the 3rd phone (our home phone) does not ring. Is this a hardware problem? My wife's iPhone 6 works with no problem and was purchased the same time I purchased my iPhone 6. Probably time for a visit to the Apple Store unless there is another solution.
    iPhone 6; iOS 8.1.3; Carrier: Verizon

  • Verizon recording cut into my conference call

    Verizon recording cut into my conference call and everyone (100 people on the call) heard it. I was listening to the conference with the mute on (*6). My phone rang--which everyone heard--and the Verizon message that goes to the caller came on. Everyone on the conference call stopped talking as verizon said, "The person you are trying to call cannot be reached at this time. Please call later." This went over the conference call twice. Can I prevent this or is it a Verizon glitch?

    Whilst I have no idea about Verizon ,I use a similar device in UK receiving cellular over broadband in property and I have wired broadband with unlimited use
    However the device is certainly using bandwidth over my wired service when active
    I would try to get a definitive does it or doesn't it and if not  then they will cover any cost if they are wrong

  • CONFERENCE CALLS DONT WORK ON OS 7 ALONG WITH RESPOND WITH TEXT WHILE ON A CALL

    BEFORE UPDATING MY IPHONE 5 TO OS 7, I COULD MAKE OR ADD ON UNLIMITED CONFERENCE CALLS.
    IMMEDIATELY AFTER UPDATING NOW I CAN ONLY CALL ONE PARTY AND ADD ONE MORE ON TO THE CALL.  SO BASIC THREE WAY CALL.
    ALSO I HAVE NOTICE AFTER UPGRADING THAT IF I WAS ON A CALL AND ANOTHER CALL CAME IN I COULD BRIDGE THE TWO CALLS TOGETHER.  THAT IS NO LONGER POSSIBLE IN OS 7.
    MY CARRIER IS VERIZON AND I SPOKE TO THEM IN REGARDS AND THEY NOTE I AM NOT RESTRICTED ANYWAY SINCE I AM A COMPLETE UNLIMITED USER.
    THE OTHER ISSUE I HAVE NOTICE RIGHT AFTER THE UPGRADE THAT YOU CAN NO LONGER RESPOND TO A INCOMING CALL IF YOUR ON A CALL WITH "RESPOND WITH TEXT"   THIS ONLY WORKS NOW IF YOUR NOT ON THE PHONE WHICH YOU CAN RESPOND WITH TEXT.
    I WAS HOPING BY NOW APPLE WOULD HAVE A PATCH FOR THESE ISSUES, I CAN NOT BE THE ONLY PERSON HAVING THEM WITH OS 7.

    Please stop YELLING!
    MMS messages and iMessages require a data connection. Due to the nature of Verizon's network, you can not access cellular data while on a call.
    As for conference calling, call Verizon back and escalate the call until you get someone who understands the word "provisioning". Have them re-provision your account.

  • External callers unable to join conference calls

    Scenario:  A conference call is set up using the scheduler.  Lync users are able to join the conference calls.  Users from outside PSTN are unable to join the call.  They get to the attendant, and are told they are being joined to the
    conference, then get a message "Sorry, I can't seem to connect you to your meeting right now.  Goodbye." and the call disconnects.
    Looking at call traces, I see the following error messages in the CAAServer log:
    Component: CAAServer
    Level: TL_ERROR
    Flag: TF_DIAG
    Function: CaaCall.EndTransfer
    Source: caacall.cs(3631)
    Local Time: 08/26/2014-18:28:36.161
    Sequence# : 0001BE31
    CorrelationId : 64624070
    ThreadId : 0BA8
    ProcessId : 0BB0
    CpuId : 0
    Original Log Entry :
    TL_ERROR(TF_DIAG) [0]0BB0.0BA8::08/26/2014-22:28:36.161.0001be31 (CAAServer,CaaCall.EndTransfer:caacall.cs(3631))[64624070]ConferenceFailureException. ConferenceID=[91127] InstanceID=[b64b9467-db72-41bb-a2b5-673d76777ea4]
    Component: CAAServer
    Level: TL_ERROR
    Flag: TF_DIAG
    Function: CaaCall.HandleUnexpectedException
    Source: caacallerrorhandling.cs(51)
    Local Time: 08/26/2014-18:28:36.226
    Sequence# : 0001D265
    CorrelationId : 64624070
    ThreadId : 0BA8
    ProcessId : 0BB0
    CpuId : 2
    Original Log Entry :
    TL_ERROR(TF_DIAG) [2]0BB0.0BA8::08/26/2014-22:28:36.226.0001d265 (CAAServer,CaaCall.HandleUnexpectedException:caacallerrorhandling.cs(51))[64624070][Enter] exception=[Microsoft.Rtc.Collaboration.ConferenceFailureException:The operation failed due to a response
    from the server. For more information, examine the properties on the exception and inner exception.
       at Microsoft.Rtc.Signaling.SipAsyncResult`1.ThrowIfFailed()
       at Microsoft.Rtc.Signaling.Helper.EndAsyncOperation[T](Object owner, IAsyncResult result)
       at Microsoft.Rtc.Collaboration.McuSession.EndSendCommandInternal(IAsyncResult result)
       at Microsoft.Rtc.Collaboration.AudioVideo.AudioVideoMcuSession.EndTransfer(IAsyncResult result)
       at Microsoft.LiveServer.Caa.CaaCall.EndTransfer(IAsyncResult asyncResult, Boolean& retry, Exception& caught)
    Detected at System.Environment.get_StackTrace()
       at Microsoft.Rtc.Collaboration.ConferenceFailureException..ctor(String message, Exception innerException)
       at Microsoft.Rtc.Collaboration.Conferencing.SendCommandAsyncResult.CreateConferenceFailureException(ConferenceCommandResponse commandResponse, Exception innerException)
       at Microsoft.Rtc.Collaboration.Conferencing.SendCommandAsyncResult.ProcessCccpResponse(SipMessageData messageData, responsetype response, Boolean& isPendingResponse)
       at Microsoft.Rtc.Collaboration.Conferencing.SendCommandAsyncResult.ProcessStatusMessage(SipMessageData statusMessageData, responsetype response)
       at Microsoft.Rtc.Collaboration.Conferencing.StatusMessageReceivedWorkItem.Process()
       at Microsoft.Rtc.Signaling.AsyncWorkitemQueue.ProcessItems()
       at Microsoft.Rtc.Signaling.SerializationQueue`1.ResumeProcessing()
       at Microsoft.Rtc.Signaling.SerializationQueue`1.ResumeProcessingCallback(Object state)
       at Microsoft.Rtc.Signaling.QueueWorkItemState.ExecuteWrappedMethod(WaitCallback method, Object state)
       at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)
       at System.Threading._ThreadPoolWaitCallback.PerformWaitCallbackInternal(_ThreadPoolWaitCallback tpWaitCallBack)
       at System.Threading._ThreadPoolWaitCallback.PerformWaitCallback(Object state)] m_conferenceID=[91127] m_conferenceUri=[sip:[email protected];gruu;opaque=app:conf:focus:id:4TPY99KF] InstanceID=[b64b9467-db72-41bb-a2b5-673d76777ea4]
    Component: CAAServer
    Level: TL_ERROR
    Flag: TF_DIAG
    Function: CaaCall.HandleUnexpectedException
    Source: caacallerrorhandling.cs(51)
    Local Time: 08/26/2014-18:28:36.226
    Sequence# : 0001D265
    CorrelationId : 64624070
    ThreadId : 0BA8
    ProcessId : 0BB0
    CpuId : 2
    Original Log Entry :
    TL_ERROR(TF_DIAG) [2]0BB0.0BA8::08/26/2014-22:28:36.226.0001d265 (CAAServer,CaaCall.HandleUnexpectedException:caacallerrorhandling.cs(51))[64624070][Enter] exception=[Microsoft.Rtc.Collaboration.ConferenceFailureException:The operation failed due to a response
    from the server. For more information, examine the properties on the exception and inner exception.
       at Microsoft.Rtc.Signaling.SipAsyncResult`1.ThrowIfFailed()
       at Microsoft.Rtc.Signaling.Helper.EndAsyncOperation[T](Object owner, IAsyncResult result)
       at Microsoft.Rtc.Collaboration.McuSession.EndSendCommandInternal(IAsyncResult result)
       at Microsoft.Rtc.Collaboration.AudioVideo.AudioVideoMcuSession.EndTransfer(IAsyncResult result)
       at Microsoft.LiveServer.Caa.CaaCall.EndTransfer(IAsyncResult asyncResult, Boolean& retry, Exception& caught)
    Detected at System.Environment.get_StackTrace()
       at Microsoft.Rtc.Collaboration.ConferenceFailureException..ctor(String message, Exception innerException)
       at Microsoft.Rtc.Collaboration.Conferencing.SendCommandAsyncResult.CreateConferenceFailureException(ConferenceCommandResponse commandResponse, Exception innerException)
       at Microsoft.Rtc.Collaboration.Conferencing.SendCommandAsyncResult.ProcessCccpResponse(SipMessageData messageData, responsetype response, Boolean& isPendingResponse)
       at Microsoft.Rtc.Collaboration.Conferencing.SendCommandAsyncResult.ProcessStatusMessage(SipMessageData statusMessageData, responsetype response)
       at Microsoft.Rtc.Collaboration.Conferencing.StatusMessageReceivedWorkItem.Process()
       at Microsoft.Rtc.Signaling.AsyncWorkitemQueue.ProcessItems()
       at Microsoft.Rtc.Signaling.SerializationQueue`1.ResumeProcessing()
       at Microsoft.Rtc.Signaling.SerializationQueue`1.ResumeProcessingCallback(Object state)
       at Microsoft.Rtc.Signaling.QueueWorkItemState.ExecuteWrappedMethod(WaitCallback method, Object state)
       at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)
       at System.Threading._ThreadPoolWaitCallback.PerformWaitCallbackInternal(_ThreadPoolWaitCallback tpWaitCallBack)
       at System.Threading._ThreadPoolWaitCallback.PerformWaitCallback(Object state)] m_conferenceID=[91127] m_conferenceUri=[sip:[email protected];gruu;opaque=app:conf:focus:id:4TPY99KF] InstanceID=[b64b9467-db72-41bb-a2b5-673d76777ea4]
    Component: CAAServer
    Level: TL_ERROR
    Flag: TF_DIAG
    Function: CaaCall.TransferCompletedQueued
    Source: caacall.cs(3739)
    Local Time: 08/26/2014-18:28:36.231
    Sequence# : 0001D269
    CorrelationId : 64624070
    ThreadId : 0BA8
    ProcessId : 0BB0
    CpuId : 2
    Original Log Entry :
    TL_ERROR(TF_DIAG) [2]0BB0.0BA8::08/26/2014-22:28:36.231.0001d269 (CAAServer,CaaCall.TransferCompletedQueued:caacall.cs(3739))[64624070]Call Transfer Failed. InstanceID=[b64b9467-db72-41bb-a2b5-673d76777ea4]
    The unexpected error entry includes this information in the diagnosticUtils section:
    Component: CAAServer
    Level: TL_INFO
    Flag: TF_DIAG
    Function: DiagnosticUtils.TryCreateSignalingHeader
    Source: diagnosticutils.cs(269)
    Local Time: 08/26/2014-18:28:36.231
    Sequence# : 0001D268
    CorrelationId :
    ThreadId : 0BA8
    ProcessId : 0BB0
    CpuId : 2
    Original Log Entry :
    TL_INFO(TF_DIAG) [2]0BB0.0BA8::08/26/2014-22:28:36.231.0001d268 (CAAServer,DiagnosticUtils.TryCreateSignalingHeader:diagnosticutils.cs(269))Creating SignalingHeader for InstanceID=[b64b9467-db72-41bb-a2b5-673d76777ea4], header-name=[ms-diagnostics], header-value=[10010;Reason="Gateway
    side Media negotiation failed";Source="LYNC-FE.itprocare.com";component="MediationServer";sipresponsetext="Invite with Replaces failed because Gateway side reinvite failed.";DialogID="f94f35b9-7f5d-4bcd-94a8-de0fb2d8c4c6;df1bec7e24;24010080"]
    Which matches up with an error in the SIP trace:
    TL_INFO(TF_PROTOCOL) [0]0DEC.0A48::08/26/2014-22:28:36.151.0001ac66 (SIPStack,SIPAdminLog::TraceProtocolRecord:SIPAdminLog.cpp(125))$$begin_record
    Trace-Correlation-Id: 3329945913
    Instance-Id: 00000688
    Direction: outgoing
    Peer: lync-fe.itprocare.com:51307
    Message-Type: response
    Start-Line: SIP/2.0 491 Invite with Replaces failed because Gateway side reinvite failed.
    From: <sip:[email protected];gruu;opaque=app:conf:audio-video:id:4TPY99KF>;tag=26f350618b;epid=6DF0663499
    To: <sip:[email protected];gruu;opaque=srvr:MediationServer:BMFt1DuKo1KYsGtnqeobCwAA;grid=9d179e4c3aeb4fd7aedd36d7853ad98b>;epid=26F55811B8;tag=2e6beef249
    CSeq: 5 INVITE
    Call-ID: af099053-d8aa-4ca4-9820-936e8522611c
    Via: SIP/2.0/TLS 10.160.1.47:51307;branch=z9hG4bKeb2e7ed6;ms-received-port=51307;ms-received-cid=9B00
    CONTENT-LENGTH: 0
    P-ASSERTED-IDENTITY: <sip:5853307343;[email protected];user=phone>
    SERVER: RTCC/4.0.0.0 MediationServer
    ms-diagnostics: 10010;source="LYNC-FE.itprocare.com";reason="Gateway side Media negotiation failed";component="MediationServer";SipResponseText="Invite with Replaces failed because Gateway side reinvite failed."
    ms-diagnostics-public: 10010;reason="Gateway side Media negotiation failed";component="MediationServer";SipResponseText="Invite with Replaces failed because Gateway side reinvite failed."
    ms-endpoint-location-data: NetworkScope;ms-media-location-type=intranet
    Message-Body: –
    $$end_record
    The trunks are configured with REFER off and MediaBypass Off.
    We have recently moved to a direct SIP trunk from a vendor on Microsoft's Certified list.
    Lync version is 2010, with the latest CUs applied.  All other calling appears to be working correctly.  The certificate on the servers are using the SHA1 algorithm (I have seen some similar issues discussed if this was not the case.)
    At this point, I have reached the end of my immediate troubleshooting skills with this system.  Can anyone offer any suggestions as to what might be going on here?
    Thanks for any help.
    -Tim
     

    Hi,
    Please check if the default gateway associated to the Mediation Server is up or not.
    Please check if Media traffic on the Gateway be blocked with the issue of wrong encryption. Make sure it is using SRTP (not RTP). If you use RTP, please change it and then test again.
    Best Regards,
    Eason Huang
    Eason Huang
    TechNet Community Support

  • How to hang up on conference call on CDMA without hanging up on the first one?

    Is it possible to start a conference call and then disconnect with the second person called and stay on with the first on CDMA network?

    When someone hangs up it still says conference call and then I am no longer able to make a new 3 way call.... the other person could be there on the phone still but it makes me wonder if i am being charged mins for the other person still cause it still shows conference still. Kinda bugs me. i came from T MOBILE and I could join calls and manage calls etc but on Verizon i cant do this.... 

Maybe you are looking for