Configuration of /BCV/SIDEPANEL is not of type SIDE_PANEL

When opening the BCV side panel in SAP PLM the user receives the following message: Configuration of /BCV/SIDEPANEL is not of type SIDE_PANEL.
The above described issue occur only for one user, for all the others is working alright. User believes the issue appeared after reseting the user settings for running applications.
How can this problem be solved?
Kind regards,
Dacian

The BCV issue is solved after running web dynpro abap application wd_analyze_config_user then search the config /BCV/SIDEPANEL for the affected user, select the entry from the table and press delete.

Similar Messages

Trying to download icloud control panel - only getting so far. Got message: The installer encountered errors before iCloud Control Panel 2.1.2 could be configured. Your system has not been modified. To retry these operations at ltr time, pls run again.

First time on here... so not sure if doing correctly.
I'm tryng to download icloud control panel to my PC (have Windows 7 - so should be ok). I only get so far - 2 times I've tried it. Keep getting message:
The installer encountered errors before iCloud Control Panel 2.1.2 could be configured.
Your system has not been modified. To retry these operations at a later time, please run the installer again.
huh?

As I mentioned before you need to start the iTunes installation, then do NOT allow it to complete. In other words go all the way to the point that the installer extract the installation files, then STOP right there.
Now look for the temp folder and the files I mentioned in my initial posting. If you don't find the temp folder it may be because you have "Do not show hidden files and folder" selected under "View Tab" in the "Folder Options". You may need to unselec it. If you don't know about hidden files and folders in Windows XP take a look here: http://txpress.blogspot.com/2007/05/show-hidden-filesfolders-in-windows.html
Another possibility is that you may have a different path for your temp folders. To find out where you temp folders are located please do the following:
- Right click on "my computer"
- Select the "Advanced" tab
- Click on "Environment Variables"
Then look for the path for both variables "TEMP" and "TMP" take note of the path and check them out.
Or you may just go to a DOS Prompt and type the following commands:
1 - %temp% and hit enter
2 - %tmp% and hit enter
to both of these commands you will get a reply such as:
'c:\temp' is not recognized as an internal or external command, operable program or bath files.
So by looking at the reply you can see that my temp folder is c:\temp
The above is the temp folder on my machine which I've customized to my own use. Your machine may be different.
I suggest you check for the iTunes temp folder inside both your temp folders locations "TEMP" and "TMP" as they may be in different locations.
IMPORTANT NOTE: If you allow the iTunes installation to complete you will NOT SEE the iTunes temp folder and files because it will be deleted as soon as iTunes processes the installation.
Hope it helps.

Error in sales order when selecting a warranty item in configurator 'Please enter required information - Service Reference Type Code'

Error in sales order when selecting a warranty item in configurator 'Please enter required information - Service Reference Type Code'
Not able to book the sales order because of this issue

Order Management does not support the inclusion of optional service items in a configured Model BOM (see Support article #1296751.1 for more detail). Allowing for such would therefore require customization.
As you've found, there's no modeling restriction that prevents you from creating a Model BOM that includes optional service items, nor is there any problem with creating a Configurator Model for it. And required service items (such as a warranty item that is a required child of an optional BOM component) do not present a problem; they have nothing to do with Configurator, and would never appear as sub-lines in OM. The problem arises in OM, which requires that any service item be "associated" to the item it's "servicing". OM does not automatically make such an association with service sub-lines, even though it might be argued that an association may be inferred by the BOM structure (i.e., OM does not assume that an optional service sub-line is necessarily associated, from a service standpoint, with its BOM parent). OM customization is therefore required in order to hook any service item up to its corresponding product item. Many customers who configure service along with product have implemented such a customization.
(Another gap in such a solution that may be relevant to you is that for an included optional service item requiring recurring billing, Order Management does not create the requisite Service Contract. Customers have likewise developed customizations to address this, as well.)
As this is not specifically a Configurator matter (you could have created your order without using Configurator at all, and you would have experienced the exact same behavior), please do not take my explanation as being either authoritative or comprehensive (I am a Configurator expert, and only knowledgeable enough about Order Management to be dangerous). It would be advisable for you to seek more detailed information/recommendations from the Order Management forum.
Eogan

Error: Sequence does not match type xs:string

I am using BDB XML 2.5.16 to store and query my XML documents in Java. The documents are IMDB xml documents containing actors information
obtained from INEX website https://inex.mmci.uni-saarland.de/login.jsp. One of the document I stored in the database is the following
 <?xml version="1.0" encoding="UTF-8"?>
 <persons>
 <person>
 <name>jason angeles
 </name>
 <filmography>
 <act>
 <movie>
 <title>prison planet 3 the revenge 1998
 </title>
 <year>1998
 </year>
 <character>evil ninja
 </character>
 </movie>
 </act>
 </filmography>
 </person>
 </persons>
I want to search using XQuery for filmography element whose title element contains ANY of the following keywords ('planet', 'revenge', '1998'). Below is the query I used
 // declaring function functx:contains-any-of
 String qryRk = "declare namespace functx = 'http://www.functx.com'; "
 + "declare function functx:contains-any-of "
 + "( $arg as xs:string?" + " , " + " $searchStrings as xs:string* ) as xs:boolean { "
 + "some $searchString in $searchStrings "
 + " satisfies contains($arg,$searchString)} ; ";
 String myQuery101 = qryRk + "for $entity in collection('simpleExampleData2.dbxml')//filmography "
 + "where functx:contains-any-of ( $entity/act/movie/title , ('planet', 'revenge', '1998'))"
 + "return $entity";
When I execute the query i expect to get at least get the following element as mu output
 Document : person_31000.xml:
 <filmography>
 <act>
 <movie>
 <title>prison planet 3 the revenge 1998
 </title>
 <year>1998
 </year>
 <character>evil ninja
 </character>
 </movie>
 </act>
 </filmography>
However instead of the above element i got the following Error
 Exception in thread "main" com.sleepycat.dbxml.XmlException: Error: Sequence does not match type xs:string? - the sequence contains more than one item [err:XPTY0004], <query>:1:343, errcode =
 QUERY_EVALUATION_ERROR
 at com.sleepycat.dbxml.dbxml_javaJNI.XmlManager_query__SWIG_0(Native Method)
 at com.sleepycat.dbxml.XmlManager.query(XmlManager.java:544)
 at com.sleepycat.dbxml.XmlManager.query(XmlManager.java:320)
 at xmlirsystemstruxplus.XQueryEngine.queryEngine(XQueryEngine.java:269)
 at xmlirsystemstruxplus.XMLIRSystemStruXplus.main(XMLIRSystemStruXplus.java:109)
 Java Result: 1
 Note that i used contains-any-of() function because the contains () function does not work with 'planet revenge 1998' string may be because the keywords do not appear in the order they appear in the element content.
 Please can any body help me to find out (1) why i have the above error ? and solution (2) why the condition contains ( $entity/act/movie/title , 'planet revenge 1998') is not working ? how do i use contains() function w.r.t this
Thank you in advance
Message was edited by: RokoA 19/01/2015 by RokoA

Using the shell dbxml in both 2.5 and 6.0 I created a container and put the document example you gave into it. Then I executed the following query:
[code]
declare namespace functx = 'http://www.functx.com';
declare function functx:contains-any-of ( $arg as xs:string?, $searchStrings as xs:string* ) as xs:boolean {
some $searchString in $searchStrings
satisfies contains($arg,$searchString)
for $entity in collection('simpleExampleData2.dbxml')//filmography
where functx:contains-any-of ( $entity/act/movie/title , ('planet', 'revenge', '1998'))
return $entity
[/code]
And got the results you expected instead of an error.
Since you are using the Java API it is possible the problem is in how you configured and executed the query, instead of in the query itself. If you could post an example program or code section that produces the error, then I can continue you help you with this.
Lauren Foutz

Where to configure Tax categories for tax related Condition types

Hi all,
Could you pls let me know Where to configure Tax categories for tax relevant Condition types. (any tcode for this)
When we are creating condition records for tax relevant condition types then you have to assign tax classification for customer and tax classification for material....i am providing 1 and 1 for customer and material as well.....then assigning tax code....when trying to save this doc.... system throwing this error....Tax indicator 1 is not defined for use with condition type O012. This means for 1 we can't find tax categories maintained.
Please look into this and your help would be appreciable.....
Thanks in advance....regards.....Diwakaran......

Hi,
1. First you need to create condition type eg : ZCST in V/06 by copying standard condition type for taxes MWST for output taxes.
2. you need to assign this condition type to country eg:IN in OVK1 T-Code.
3. Next you need to define Tax classification for customer eg : 1 in OVK3 T-Code and assign it to tax category (condition type : ZCST)
4. Next you need to define Tax classification for material eg : 1 in OVK4 T-Code and assign it to tax category (condition type : ZCST)
5. Maintain this tax classification in XD01 & MM01 T-Codes.
Regards,
Dippy

Problem configuring Adobe Forms: ADSUSER does not have access to method...

I hope all of you are doing well...
So here is a rundown on what is happening.
Enviroment:
Netweaver 7.0
ECC 6.0
Abap and Java stacks are installed on the same system.
Problem:
I am trying to configure Adobe Print forms and not Interactive forms. When I run the test: FP_PDF_TEST_00
I get the following error:
Error Code: 100.102
SOAP Runtime Exception: CSoapExceptionFault : SOAP fault found in SOAP document /User ADSUSER does not have access to method rpData./<ns1:com.sap.engine.services.ejb.exceptions.
When I run the rpData test from the J2EE server I get the following response:
HTTP/1.1 500 Internal Server Error
Connection: close
Server: SAP J2EE Engine/7.00
Content-Type: text/xml; charset=UTF-8
Date: Fri, 03 Oct 2008 15:56:51 GMT
<SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xs="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" ><SOAP-ENV:Body><SOAP-ENV:Fault><faultcode>SOAP-ENV:Client</faultcode><faultstring>User ADSUSER does not have access to method rpData.</faultstring><detail><ns1:com.sap.engine.services.ejb.exceptions.BaseEJBException xmlns:ns1='http://sap-j2ee-engine/client-runtime-error'>User ADSUSER does not have access to method rpData.</ns1:com.sap.engine.services.ejb.exceptions.BaseEJBException></detail></SOAP-ENV:Fault></SOAP-ENV:Body></SOAP-ENV:Envelope>
I would really appreciate all the help that I can get.
Thanks...

Thanks for the tip,
I had actually gone through the note before and tried out a couple of tips that were suggested in the note. I am still having the issue and believe that it might be due to the fact that I do not have a Credentials file installed.
I am applying for the credential and will see what happens.
thanks,
Saif

Test Note (Documentation Type) when creating Test Plan

Hi Gurus.
After we upgraded our SolMan 7.0 system from Support Pack (ST component ) level 19 to level 25, I noticed this new field "Test Note" (Dcoumentation Type) when creating a Test Plan in transaction STWB_2.
Initially, when I haven't chosen any project yet, this field has a list-of-values (i.e. Test Case Note, iTutor Document) but when I choose a project, the list-of-values only showing "ST". I also tried choosing another project and there is no value in the list.
Does anyone know where this list is coming from or how I can configure this?
It looks like project-related and but I couldn't find any settings for this.
Can this field be turned off so it will not show in the screen?
Thanks,
Tess

Hi Tess,
The documentation type ST is the standard documentation type for test notes.
Test notes are needed by testers to document results in detail during/after testing a test case.
In SOLAR_PROJECT_ADMIN there is the text menu 'GOTO - Project Template - Implementation Projects'
and then there to the tap 'Documentation Types' to do the default settings for 'ST' for all implementation projects.
Otherwise you'll have to change settings in the administration for each project!
There you can assign your own documentation template for ST in the central settings.
If you are using other project types for testing you'll have to do the same for each project type.
Regards,
Adelbert

UI Customisation Error - Could not load type ~.PlumHandler from assembly portal50

Setting up the .Net development portal for UI customisation (5.0.1). I get a clean build but when I try to run the portal I get the following error.
Server Error in '/portal' Application. <HR noShadeIZE=1>
Configuration ErrorDescription: An error occurred during the processing of a configuration file required to service this request. Please review the specific error details below and modify your configuration file appropriately. Parser Error Message: Could not load type com.plumtree.portaluiinfrastructure.activityspace.PlumHandler from assembly portal50.Source Error:
Line 10: </sessionState>
Line 11: <httpHandlers>
Line 12: <add verb="*" path="*.pt"
Line 13: type="com.plumtree.portaluiinfrastructure.activityspace.PlumHandler,portal50" />
Line 14: </httpHandlers>
Source File: C:\Program Files\plumtree\ptportal\5.0\webapp\portal\web.config[b] Line: 12
<HR noShadeIZE=1>
Version Information: Microsoft .NET Framework Version:1.0.3705.288; ASP.NET Version:1.0.3705.288
Looking in class viewer there is no com.plumtree.portaluiinfrastructure.activityspace.PlumHandler class in the com.plumtree.portaluiinfrastructure.activityspace. Is there a class file missing ?

Quick fix: Add the file "PlumHandler.cs" (found in the root of your portal webapp directory) to your portal50 project.
Proper fix: You should not be recompiling the entire UI and redeploying it, which is what you are doing (or you would not get that error).
You should create a new project, compile only the classes you want to modify into a new Assembly DLL file, add that new DLL to the webapp bin directory, and add that Assembly name to the CustomActivitySpaces.xml config file. (It should have the same format as ActivitySpaces.xml file.)
That way, you will not overwrite or delete standard portal classes, and you will also find it much easier to upgrade or apply patches in the future.

Could not load type 'C:\CFusionMX7\runtime\lib\wsconfig\jrun_iis6.dll'.

Hi there,
I installed ColdfusionMX 7 on WIndows 2008 R2 Standard server. When I try to open the admin page , I Get the error:
Server Error in '/' Application.
Could not load type 'C:\CFusionMX7\runtime\lib\wsconfig\jrun_iis6.dll'.
Description:
An unhandled exception occurred during the execution of t@he current
web request. Please review the stack trace for more information about
the error and where it originated in the code.
Exception Details: System.Web.HttpException: Could not load type 'C:\CFusionMX7\runtime\lib\wsconfig\jrun_iis6.dll'.
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:
[HttpException (0x80004005): Could not load type 'C:\CFusionMX7\runtime\lib\wsconfig\jrun_iis6.dll'.]
   System.Web.Compilation.BuildManager.GetType(String typeName, Boolean throwOnError, Boolean ignoreCase) +8926577
   System.Web.Configuration.HandlerFactoryCache.GetHandlerType(String type) +21
   System.Web.Configuration.HandlerFactoryCache..ctor(String type) +19
   System.Web.HttpApplication.GetFactory(String type) +78
   System.Web.MaterializeHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Exec ute() +229
   System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) +155
Version Information: Microsoft .NET Framework Version:2.0.50727.5477; ASP.NET Version:2.0.50727.5483
Any idea what is causing this problem and how to fix it.
Thanks
Joe Green

I gave IIS AppPool\DefaultAppPool NTFS permissions to C:\CFusionMX7\runtime\lib\wsconfig\ folder. Under IIS 6 Management Compatibility, I installed IIS 6 Metabase Compatibility and IIS 6 Management Console installed. Web Server Configuration tool doesn't work because my IIS version is 7.5 and Supported versions are 4, 5 and 6. So I manually added using this article http://www.adobe.com/devnet/coldfusion/articles/iis-configuration.html but no luck.
I didn't add IIS 6 WMI Compatibility and IIS 6 Scripting Tools.
Is it because CF7 doesn't work on IIS 7.5 on Win 2008 R2 SP1?

I just bought an airport express and I am in the process of configuring but my mac does not detect any airport devise. internet is working wirelessly and the airport is plugged next to the mac. any clue how can I fix this?

I just bought an airport express but when trying to configure it my mac is not capable of detecting the devise. The airport is plugged right next to the modem and the wireless internet is running perfectly. does any one experience this before?

You don't mention what function you want the AirPort Express to accomplish.
If you are trying to configure it to "join" your existing wireless network, you need to know the exact type of security that your wireless network is using fo you can use that same information to provide the correct settings to the AirPort Express.
You may be getting a message that the settings have been stored successfully, but unfortunately the settings that you have provided to the Express are likely the wrong settings.
The only way that you really know if the settings that you entered were correct is if you get a green light 20-30 seconds after you click Update. If you don't get a green light on the Express, the settings that you provided were not the correct settings.
When you click Update, the Express will "disappear". This is normal. Up until the time that you click update, AirPort Utility is communicating to the Express on a wireless network with a name like Apple Network xxxxxxx. As soon as you click Update, the Express switches (or tries to switch) to another network, so of course it will disappear from the AirPort Utility window.
As soon as you click Update, close AirPort Utility. There is no reason to keep watching a window when the Express will never appear.

Configure Samba Server as per note 680617

Hi,
I am installing Dialog Instance on Windows. CI(ERP 6.0) and DB(Oracle) are in Unix.
As per note 680617INST APPl. Server in Heterogenous SAP System Environment, I am configuring Samba Server.
in that note it has been mentioned as :-
On Unix, release the /usr/sap directory as SAPMNT. ( using SAMBA)
 --> is this to be achieved in writing in config file
 of samba .. if yes where ? need details. 
The user who is performing installation on the windows host as well as the <sapsid>adm and SAPService<SAPSID> Windows users created during the installation must have read and write authorization on this share directory and its subdirectories.
 --> How to achieve this. what we should do on the
 Unix side ?
My Best Regards
Paguras
Message was edited by:
 PAGURAS to add more clarity to the Question

Paguras,
Look for a file called smb.conf......../etc/samba is where i would look for it......................
More details on samba config here............
Samba uses /etc/samba/smb.conf as its configuration file. If you change this configuration file, the changes will not take effect until you restart the Samba daemon with the command service smb restart.
The default configuration file (smb.conf) in Red Hat Linux 8.0 allows users to view their Linux home directories as a Samba share on the Windows machine after they log in using the same username and password. It also shares any printers configured for the Red Hat Linux system as Samba shared printers. In other words, you can attach a printer to your Red Hat Linux system and print to it from the Windows machines on your network.
To specify the Windows workgroup and description string, edit the following lines in your smb.conf file:
workgroup = WORKGROUPNAME
server string = BRIEF COMMENT ABOUT SERVER
Replace WORKGROUPNAME with the name of the Windows workgroup to which this machine should belong. The BRIEF COMMENT ABOUT SERVER is optional and will be the Windows comment about the Samba system.
To create a Samba share directory on your Linux system, add the following section to your smb.conf file (after modifying it to reflect your needs and your system):
[sharename]
comment = Insert a comment here
path = /home/share/
valid users = tfox carole
public = no
writable = yes
printable = no
create mask = 0765
The above example allows the users tfox and carole to read and write to the directory /home/share, on the Samba server, from a Samba client.
Samba Passwords
In Red Hat Linux 8.0 encrypted passwords are enabled by default because it is more secure. If encrypted passwords are not used, plain text passwords are used, which can be intercepted by someone using a network packet sniffer. It is recommended that encrypted passwords be used.
The Microsoft SMB Protocol originally used plaintext passwords. However, Windows 2000 and Windows NT 4.0 with Service Pack 3 or higher require encrypted Samba passwords. To use Samba between a Red Hat Linux system and a system with Windows 2000 or Windows NT 4.0 Service Pack 3 or higher, you can either edit your Windows registry to use plaintext passwords or configure Samba on your Linux system to use encrypted passwords. If you choose to modify your registry, you must do so for all your Windows NT or 2000 machines this is risky and may cause further conflicts.
To configure Samba on your Red Hat Linux system to use encrypted passwords, follow these steps:
 1.
 Create a separate password file for Samba. To create one based on your existing /etc/passwd file, at a shell prompt, type the following command:
 cat /etc/passwd | mksmbpasswd.sh > /etc/samba/smbpasswd
 If the system uses NIS, type the following command:
 ypcat passwd | mksmbpasswd.sh > /etc/samba/smbpasswd
 The mksmbpasswd.sh script is installed in your /usr/bin directory with the samba package.
 2.
 Change the permissions of the Samba password file so that only root has read and write permissions:
 chmod 600 /etc/samba/smbpasswd
 3.
 The script does not copy user passwords to the new file. To set each Samba user's password, use the command (replace username with each user's username):
 smbpasswd username
 A Samba user account will not be active until a Samba password is set for it.
 4.
 Encrypted passwords must be enabled in the Samba configuration file. In the file smb.conf, verify that the following lines are not commented out:
 encrypt password = yes
 smb passwd file = /etc/samba/smbpasswd
 5.
 Make sure the smb service is started by typing the command service smb restart at a shell prompt.
 6.
 If you want the smb service to start automatically, use ntsysv, chkconfig, or Services Configuration Tool to enable it at runtime. Refer to Chapter 13 for details.
Tip Tip
Read /usr/share/doc/samba-<version>/docs/htmldocs/ENCRYPTION.html to learn more about encrypted passwords. (replace <version> with the version number of Samba that you have installed).
The pam_smbpass PAM module can be used to sync users' Samba passwords with their system passwords when the passwd command is used. If a user invokes the passwd command, the password he uses to log in to the Red Hat Linux system as well as the password he must provide to connect to a Samba share are changed.
To enable this feature, add the following line to /etc/pam.d/system-auth below the pam_cracklib.so invocation:
password required /lib/security/pam_smbpass.so nullok use_authtok try_first_pass
Hope that helps
Ravi Raman

Configuration file jdbcpds.conf is not found.

Hi,
My problem is: Configuration file jdbcpds.conf is not found
When: I've this problem when I try to run a report with rwrun. The file is in the reports/conf folder. We try execute this reports at the client side.
I think that reports doesn't find the conf files because folder's name have changed. In wich configuration files/registry/env. path i can put the access to the reports/conf folder?
Under 10g
Thx very much

I've found my problem
in ORACLE_HOME\cauprefs.ora I've to add this line
Reports.PluggableDataSourceFactories = "oracle.reports.plugin.datasource.jdbcpds.JDBCDataSourceFactory"
in ORACLE_HOME\reports\conf\rwbuilder.conf I've to add this line
<pluginParam name="jdbcpds" type="file">jdbcpds.conf</pluginParam>
that it!

Configure XQuery Transformation dialog does not show mfl file

I have created a valid mfl file. I would like to use this file as an input type.
I have copied the file into the schema directory, however the Configure XQuery
Transformation dialog does not show the file.
All help highly appreciated.
Regards
Doshi

Hi ..
Might be corrupted Finder preferences.
Open the Finder. From the Finder menu bar click Go > Go to Folder
Type or copy paste the following:
~/Library/Preferences/com.apple.finder.plist
Click Go then move the com.apple.finder.plist file to the Trash.
Restart your Mac.

Trinidad error -- Could not load type properties in jdev11

Hi,
i am trying to run sample application "Build an End-to-End Web Application with ADF Faces and Oracle TopLink" at this url--
http://www.oracle.com/technology/obe/obe1013jdev/10131/10131_adftoplink/master-detail-edit_page_adf_toplink.htm
when i try to run .jspx in jdev11, it shows
Target URL -- http://127.0.0.1:8988/MDTopLink-UserInterface-context-root/deptEmp.jspx
Aug 23, 2007 7:50:55 PM com.sun.faces.config.ConfigureListener contextInitialized
INFO: Initializing JavaServer Faces implementation (1.2_03-b09) for context '/MDTopLink-UserInterface-context-root'
Aug 23, 2007 7:50:59 PM com.sun.faces.spi.InjectionProviderFactory createInstance
WARNING: JSF1033: Resource injection is DISABLED.
Aug 23, 2007 7:51:00 PM org.apache.myfaces.trinidad.component.UIXComponentBase _createType
SEVERE: Could not load type properties
java.lang.NullPointerException
 at oracle.oc4j.loader.CompilingSearchPolicy.getClass(CompilingSearchPolicy.java:101)
 at oracle.classloader.SearchSequence.getClass(SearchSequence.java:119)
 at oracle.classloader.PolicyClassLoader.internalLoadClass(PolicyClassLoader.java:1618)
 at oracle.classloader.PolicyClassLoader.loadClass(PolicyClassLoader.java:1579)
 at oracle.classloader.PolicyClassLoader.loadClass(PolicyClassLoader.java:1564)
 at org.apache.myfaces.trinidad.component.UIXComponentBase._createType(UIXComponentBase.java:1409)
 at org.apache.myfaces.trinidad.component.UIXComponentBase.<clinit>(UIXComponentBase.java:97)
 at oracle.adfinternal.view.faces.renderkit.rich.DialogRenderer.<init>(DialogRenderer.java:34)
 at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
 at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
 at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
 at java.lang.reflect.Constructor.newInstance(Constructor.java:494)
 at java.lang.Class.newInstance0(Class.java:350)
 at java.lang.Class.newInstance(Class.java:303)
 at com.sun.faces.config.ConfigureListener.configure(ConfigureListener.java:1095)
 at com.sun.faces.config.ConfigureListener.configure(ConfigureListener.java:1168)
 at com.sun.faces.config.ConfigureListener.configure(ConfigureListener.java:566)
 at com.sun.faces.config.ConfigureListener.contextInitialized(ConfigureListener.java:454)
 at com.evermind.server.http.HttpApplication.initDynamic(HttpApplication.java:1259)
 at com.evermind.server.http.HttpApplication.<init>(HttpApplication.java:833)
 at com.evermind.server.ApplicationStateRunning.getHttpApplication(ApplicationStateRunning.java:433)
 at com.evermind.server.Application.getHttpApplication(Application.java:693)
 at com.evermind.server.http.HttpSite$HttpApplicationRunTimeReference.createHttpApplicationFromReference(HttpSite.java:2039)
 at com.evermind.server.http.HttpSite$HttpApplicationRunTimeReference.createHttpApplicationFromReference(HttpSite.java:2022)
 at com.evermind.server.http.HttpSite$HttpApplicationRunTimeReference.getHttpApplication(HttpSite.java:1974)
 at com.evermind.server.http.HttpSite.getApplication(HttpSite.java:423)
 at com.evermind.server.http.HttpRequestHandler.resolveApplication(HttpRequestHandler.java:543)
 at com.evermind.server.http.HttpRequestHandler.initRequest(HttpRequestHandler.java:345)
 at com.evermind.server.http.HttpRequestHandler.serveOneRequestOpen(HttpRequestHandler.java:264)
 at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:155)
 at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:142)
 at oracle.oc4j.network.ServerSocketReadHandler$ClientRunnable.run(ServerSocketReadHandler.java:275)
 at oracle.oc4j.network.ServerSocketAcceptHandler.procClientSocket(ServerSocketAcceptHandler.java:237)
 at oracle.oc4j.network.ServerSocketAcceptHandler.access$800(ServerSocketAcceptHandler.java:29)
 at oracle.oc4j.network.ServerSocketAcceptHandler$AcceptHandlerHorse.run(ServerSocketAcceptHandler.java:878)
 at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:650)
 at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:675)
 at java.lang.Thread.run(Thread.java:595)
Any suggestions to solve this ?
Thanks,
Tilak Kumar

Hi,
in which step does this happen? Also,how closely did you follow the how-to. Did you select ADF Faces 10.1.3 library in the library manager?
Note that there exist a specific JDeveloper 11 forum as well:
JDeveloper and OC4J 11g Technology Preview
Frank

Could not find type error - unknown or missing type

Hello,
I have a sequence file created on the TestStand 3.5 version (running on winXP which I don't have at the moment) and I'm trying to use this sequence on my TestStand 4.2 (running on Win7).
The error is (see attached picture) Could not find type 'XML_POPUP' ,unknown or missing type.
I have tried adding a type named XML_POPUP to the MyTypes.ini->Step Types.
Is there a way to load the sequence without a type, I only need to see the steps and extract data for the new sequence I'm building.
I can also view the code of the sequence in NOTEPAD++ , is there a way to extract the data using the this code?
Thank you,
Lev
Attachments:
Capture.JPG ‏34 KB

Hi,
I have found an .ini file containing the XML_POPUP step type (as seen in the attached picture).
When I'm trying to load the sequence I receive the same error, that the 'XML_POPUP' type is not found.
After loading the .ini file as seen in the picture, do I need to configure something else for the sequence I'm trying to load to locate this type?
Thank you,
Lev
Attachments:
Capture.JPG ‏133 KB

Configuration of /BCV/SIDEPANEL is not of type SIDE_PANEL

Similar Messages

Maybe you are looking for