Configure Dynamics AX 2012 Mobile Connector Error

I tried to install and Configure Dynamics AX Mobile Time and Expense application, by following the instructions mentioned in the Whitepaper (ConfigureMicrosoftDynamicsAXConnectorforMobileApplications.docx).
Azure Account Creation
ADFS 2.0 Configuration
Installation of Hotfix for Dynamics AX (For Timesheet service and additional operations on unreconciled expense)
Mobile Connector installation and configuration
When I tried to click on start button on mobile connector after configuring the parameters am getting error as below.
When I checked the Windows event viewer the error is as below
.NET Runtime Error:-
Application: Microsoft.Dynamics.Framework.RapidStart.Connector.GUI.exe
Framework Version: v4.0.30319
Description: The process was terminated due to an unhandled exception.
Exception Info: System.TimeoutException
Stack:
Server stack trace:
   at System.ServiceModel.Dispatcher.DuplexChannelBinder.Request(Message message, TimeSpan timeout)
   at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout)
   at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation)
   at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message)
   at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(System.Runtime.Remoting.Messaging.IMessage, System.Runtime.Remoting.Messaging.IMessage)
   at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(System.Runtime.Remoting.Proxies.MessageData ByRef, Int32)
   at Microsoft.Dynamics.Framework.RapidStart.Connector.ISubscriptionService.StartModule(System.String)
   at Microsoft.Dynamics.Framework.RapidStart.Connector.GUI.ConnectorWindow.buttonStartModule_Click(System.Object, System.Windows.RoutedEventArgs)
   at System.Windows.EventRoute.InvokeHandlersImpl(System.Object, System.Windows.RoutedEventArgs, Boolean)
   at System.Windows.UIElement.RaiseEventImpl(System.Windows.DependencyObject, System.Windows.RoutedEventArgs)
   at System.Windows.Controls.Button.OnClick()
   at System.Windows.Controls.Primitives.ButtonBase.OnMouseLeftButtonUp(System.Windows.Input.MouseButtonEventArgs)
   at System.Windows.RoutedEventArgs.InvokeHandler(System.Delegate, System.Object)
   at System.Windows.EventRoute.InvokeHandlersImpl(System.Object, System.Windows.RoutedEventArgs, Boolean)
   at System.Windows.UIElement.ReRaiseEventAs(System.Windows.DependencyObject, System.Windows.RoutedEventArgs, System.Windows.RoutedEvent)
   at System.Windows.RoutedEventArgs.InvokeHandler(System.Delegate, System.Object)
   at System.Windows.EventRoute.InvokeHandlersImpl(System.Object, System.Windows.RoutedEventArgs, Boolean)
   at System.Windows.UIElement.RaiseEventImpl(System.Windows.DependencyObject, System.Windows.RoutedEventArgs)
   at System.Windows.UIElement.RaiseTrustedEvent(System.Windows.RoutedEventArgs)
   at System.Windows.Input.InputManager.ProcessStagingArea()
   at System.Windows.Input.InputProviderSite.ReportInput(System.Windows.Input.InputReport)
   at System.Windows.Interop.HwndMouseInputProvider.ReportInput(IntPtr, System.Windows.Input.InputMode, Int32, System.Windows.Input.RawMouseActions, Int32, Int32, Int32)
   at System.Windows.Interop.HwndMouseInputProvider.FilterMessage(IntPtr, MS.Internal.Interop.WindowMessage, IntPtr, IntPtr, Boolean ByRef)
   at System.Windows.Interop.HwndSource.InputFilterMessage(IntPtr, Int32, IntPtr, IntPtr, Boolean ByRef)
   at MS.Win32.HwndWrapper.WndProc(IntPtr, Int32, IntPtr, IntPtr, Boolean ByRef)
   at MS.Win32.HwndSubclass.DispatcherCallbackOperation(System.Object)
   at System.Windows.Threading.ExceptionWrapper.InternalRealCall(System.Delegate, System.Object, Int32)
   at MS.Internal.Threading.ExceptionFilterHelper.TryCatchWhen(System.Object, System.Delegate, System.Object, Int32, System.Delegate)
   at System.Windows.Threading.Dispatcher.WrappedInvoke(System.Delegate, System.Object, Int32, System.Delegate)
   at System.Windows.Threading.Dispatcher.InvokeImpl(System.Windows.Threading.DispatcherPriority, System.TimeSpan, System.Delegate, System.Object, Int32)
   at MS.Win32.HwndSubclass.SubclassWndProc(IntPtr, Int32, IntPtr, IntPtr)
   at MS.Win32.UnsafeNativeMethods.DispatchMessage(System.Windows.Interop.MSG ByRef)
   at System.Windows.Threading.Dispatcher.PushFrameImpl(System.Windows.Threading.DispatcherFrame)
   at System.Windows.Application.RunInternal(System.Windows.Window)
   at System.Windows.Application.Run()
   at Microsoft.Dynamics.Framework.RapidStart.Connector.GUI.App.Main()
Please suggest any solutions. Thanks

HI
I am trying to involve someone familiar with this topic to further look at this issue. There might be some time delay. Appreciate your patience.
Dino He
MSDN Community Support | Feedback to us
Develop and promote your apps in Windows Store
Please remember to mark the replies as answers if they help and unmark them if they provide no help.

Similar Messages

  • VMM 2012 - SCOM2012 connector error

    Hi,
    After creating a SCOM2012 connector in VMM2012, it shows the following error:
    Operations Manager discovery failed with error: "Exception of type 'Microsoft.VirtualManager.EnterpriseManagement.Common.DiscoveryDataInvalidRelationshipSourceExceptionOM10' was thrown.".
    I've update SCOM2012 with the update rollup 1 and all my management packs seem to be up-to-date.
    any ideas how to fix this?
    Thank you,
    Stephane

    Thanks Chetan for helping us.
    Faced mentioned issue while configuring Pro-tips , i have 2 Windows clusters, one cluster with 2 hyper-v nodes and another with 3 hyper-v nodes.
    Installed SCOM agent only on 3 node cluster, i think i have to deploy scom agents in 2node cluster as well and it should work !!
    http://blogs.technet.com/b/operationsmgr/archive/2012/01/23/potential-issues-with-vmm-2012-opsmgr-integration.aspx
    Kirpal Singh

  • Error publishing SSRS Report in Dynamics AX 2012 Enterprise Portal

    Good morning.
    I have a problem ad i'll appreciate so much your help. I made a SSRS Reporting project with Business Intelligence Development Studio (through the template "Business Intelligence --> Report Server Project). Once deployed to report server, the report
    successfully works. I Want to publish this report in Dynamics AX 2012 Enterprise Portal, through the web part "SQL Server Reporting
    à SQL Server Reporting Services Report Viewer", but when i select the .rdl file from the list, i receive the following error:
    An error occurred during local report processing.
    An error has occurred during report processing.
    Cannot create a connection to data source 'DataSource1'.
    An attempt has been made to use an unregistered data extension, 'OLEDB-MD'. To use this data extension, it must be registered in the Web.config file of this Web application.
    I've Checked the config file and the specified handler is correctly set. I read in a forum that the problem may be caused by the fact that the database of the report server is set as "Native" instead of "Sharepoint Integrated". Is it
    possible? just in case, there's the possibility to display a ssrs report in EP in "native mode"?
    Thank you so much in advance
    Simone

    Hi Katherine.
    Thank you so much for your reply. You understood perfectly what I mean. I followed the instructions in the document, but the installation of te .cab file won't work. I tried with the Sharepoint Management Shell and with STSADM.EXE, but in both cases i receive
    an error like this:
    PS C:\> Install-SPWebPartPack -LiteralPath "C:\Program Files (x86)\Microsoft SQL
     Server\110\Tools\Reporting Services\SharePoint\RSWebParts.cab" -GlobalInstall
    Confirm
    Are you sure you want to perform this action?
    Performing operation "Install-SPWebPartPack" on Target "C:\Program Files
    (x86)\Microsoft SQL Server\110\Tools\Reporting
    Services\SharePoint\RSWebParts.cab".
    [Y] Yes  [A] Yes to All  [N] No  [L] No to All  [S] Suspend  [?] Help
    (default is "Y"):y
    Install-SPWebPartPack : Failed to extract the cab file in the solution.
    At line:1 char:1
    + Install-SPWebPartPack -LiteralPath "C:\Program Files (x86)\Microsoft SQL
    Server\ ...
    + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    ~~~
        + CategoryInfo          : InvalidData: (Microsoft.Share...tallWebPartPack:
       SPCmdletInstallWebPartPack) [Install-SPWebPartPack], SPException
        + FullyQualifiedErrorId : Microsoft.SharePoint.PowerShell.SPCmdletInstallW
       ebPartPack
    PS C:\>
    I checked the directory and the .cab file is in the right position. Am I doing something wrong?
    Thanks a lot in advance.
    Simone

  • OIM DBUM connector error

    Hi All,
    I have instlalled the OIM DBUM connector for Oracle databse. I have provided all the parametrs except connectionproperties column while configuring the itresource for the connector.when trying to run the schedulers OOTB to populate lookups synchronized with target iam getting the following error.please help me out.
    oracle.iam.connectors.icfcommon.exceptions.OIMException: Thor.API.Exceptions.tcAPIException: Row index out of bounds
    thanks.

    Hi Ketan,
    I have installed DBUM *11.1.1.6* on OIM *11.1.1.5* locally.
    in the connector guide i followed below steps.
    1. Sec:2.2.1 Installing the Connector in Oracle Identity Manager
    2. Sec:2.3 Postinstallation
    Section 2.3.1, "Postinstallation on Oracle Identity Manager"
    Section 2.3.1.1, "Configuring the Target System As a Trusted Source"-notdone
    Section 2.3.1.2, "Changing to the Required Input Locale" -----left it with default values
    Section 2.3.1.3, "Clearing Content Related to Connector Resource Bundles from the
    Server Cache"
    Section 2.3.1.4, "Creating the Administrator Account on Oracle Database Vault"-----not done
    Section 2.3.1.5, "Setting up the Lookup Definition for Connection Pooling"---not done
    Section 2.3.1.6, "Enabling Logging for Oracle Identity Manager"
    Section 2.3.2 Configuring the IT Resource for the Target System
    In this we have a parameter text field called Connection Properties ----I left it blank and dont know what needs to be filled.
    Remaining parameters are set
    Database Name-IP of DB machine
    DB Type
    JDBC Driver
    JDBC URL
    Login Password
    Login User
    I could see connector installation success message. But when I am trying to run the scheduled jobs configured to populate the lookups , getting the above mentioned error.
    Thanks.
    Section 2.3.2, "Configuring the IT Resource for the Target System"
    Section 2.3.3, "Configuring the Connector to Support Multiple Versions of the
    Target System"------------------->not done
    Edited by: Powerlad on Sep 2, 2012 11:55 PM

  • Database connector error:Unexpected when connecting to salesforce in CR2008

    ISSUE:: Unable to connect to salesforce in CR2008 as when he tries to select the table in the Database expert he gets an error 'Database connector error: Unexpected' however he is able to connect to salesforce and then select the tables using CR XI R2
    Observed Behavior:
    - The customer is able to  connect to salesforce and then select the tables in CR XI R2 however when he tries to select the table through CR 2008 he gets an error 'Database connector error: Unexpected'. 
    - He does not have an issue switching Windows accounts.  He can log in to Salesforce.com from Crystal Reports XIR2 and 2008 using a SFDC account with restricted access from my Windows account.  However, he is not able to log in to SFDC using the system administrator SFDC account in Crystal Reports 2008, but is able to using Crystal Reports XIR2.  This applies to the production and sandbox SFDC environment.
    - He can update data on all reports using CR2008 if the report was created in CRXIR2.  He cannot access any data from reports created with CR2008.
    Expected Behavior:
    - Should be able to select the tables and create reports based off it.
    Steps to reproduce: 
    - Open Crystal Reports 2008 and then connect to salesforce with the credentials provided by the user i.e. 
    test.nussbaumer @cit.com.test
    crystal2008
    token:  LxYbugxsVmGpRL1QOVIC2q0e  '
    This gives an error:
    'Logon failed. Details: Unexpected Error; nested exception is java.net.UnknownHostException: www.salesforce.com
    What has been done so far:
    -Have tried the repair on CR 2008 but didn't help.
    - The customer has tried some user credentials for a different user in his SFDC instance and was also able to login.  He realized that only the system administrator is not able to login.  Customer had sent the sample credentials for a test system administrator profile in his sandbox environment.  (test.salesforce.com) , used that on my end to connect however it gave the error :'Logon failed. Details: Unexpected Error; nested exception is java.net.UnknownHostException: www.salesforce.com'
    test.nussbaumer @cit.com.test
    crystal2008
    token:  LxYbugxsVmGpRL1QOVIC2q0e
    To access the Sandbox, he uses test.salesforce.com as the server when connecting with Cyrstal Reports 2008.
    - He reset the password and received the same error.  He can access Salesforce.com with CR XI R2, but not with CR2008. 
    - He set up a new computer with only JDK 1.4 on it, using Windows XP Professional and received the same error. His comments:
    ( I don't believe that this has anything to do with the JDK version, but rather with the size of the metadata in SFDC.  If I login as the administrator, I receive the error in CR2008.  However, as mentioned before, if I login as a standard user I am able to use CR2008.)
        We tried resetting the User Security token by follwoing the below steps(A security token is not needed for login as I am using a trusted network by SFDC):
    Steps for Resetting a User Security Token:
       1.) To reset your security token, click Setup | My Personal Information | Reset Security Token, and click the Reset Security Token button. The new security token is sent via email to the email address on your Salesforce user record.
       2.) You will need to login by entering your username and then your password + security token (without the +).
    - Modified the CRConfig.XML file for the proxy server settings and then tried connecting to pull up the tables however still gave the same error.
    Configuration:
    Windows XP Professional 5.1.2600 SP2 Build 2600 
    CRXIR2 - 11.5.9.1076
    CR2008 - 12.0.0.683
    J2SE Development Kit 1.5.0.60
    He is using JDK 1.6 (file: jre1.6.0_05).  He tried installing JDK 1.4 and pointing to the file:  jre1.4.2_17 but had no success.
    Version 3 of the Crystal Reports for Salesforce.com driver
    Sandbox environment
    Edited by: Komal Prasad on Jun 26, 2008 5:28 PM
    Edited by: Komal Prasad on Jun 26, 2008 5:29 PM

    Please re-post if this is still an issue to the OnDemand Forum or purchase a case and have a dedicated support engineer work with you directly

  • Windows Server 2012 Essentials Connector version is more current than server

    In trying to connect a new laptop to domain/server, it kept failing with a message indicating that other software was in the process of installing or that a reboot was pending.  Since neither was the case, I downloaded the current version of the Connector
    software from the Microsoft website to try.  That didn't work either.  It turns out that a pre-installed software component called Intel Smart Connect Tech was keeping the laptop from connecting.  I uninstalled this software and installed the
    connector software and it appeared to connect to the server.  However, it is displayed in the Essentials Dashboard as Offline.  The client (Laptop) displays a message saying "The Windows Server 2012 Essentials Connector version that is installed
    on this computer is more recent that the sever.  Contact the administrator to ensure the server is up to date".  I tried uninstalling the Connector software from Control Panel, but I get a message "Could not delete key \software\microsoft\windows
    server.  Verify that you have sufficient access to that key, or contact your support personnel".  I've tried both with domain admin and local admin credentials.  So, I ignored the message and continued the connector install.  It finished
    and appeared to connect successfully.  The connector version displayed in Control Panel\Programs and Features is correct.  However, the registry entry is not updated and the version error pops up with each login and the Dashboard shows the client
    as offline. 

    Hi C.R.Lowe,
    Based on your description, I’m a little confused with this issue. Before going further, would you please let
    me confirm something more? Thanks for your understanding.
    When connect the client to Windows Server 2012 Essentials, did you mean that use
    http://<servername>/Connect
    and then select Download software for Windows option? More descriptions, please refer to the following article.
    To connect a client computer to the
    server
    If I misunderstand, please don’t hesitate to let me know.
    On current situation, please navigate to the registry path as the error message shows. And check
    Version value and let me know. Meanwhile, please right click
    Windows Server folder in Registry Editor and select “Permissions…”, then check if the account was assigned the correct permission to delete key.
    In addition, please check if you have installed the
    Update Rollup 1 for Windows Server 2012 Essentials
    By the way, please check Event Viewer and some related logs if can find some more clues. If any update, please
    feel free to let me know.
    Hope this helps.
    Best regards,
    Justin Gu

  • Business View Connector Error When Developing from Client PC

    We upgraded from CE10 to BOXI 3.1 using Crystal Reports 2008 with Business Views.  Now when developing a report using a BV working in Crystal Reports 2008 on the server on which the BV resides all works fine; when we use Crystal from a client PC and start Crystal, get a BV from the server repository as a database connection,generate a simple report, running  the program returns no data but error 'Cannot Open Database' appears followed by 'Unknown Database Connector Error'.  Why is behavior from Crystal on a client PC different than when running Crystal on a PC that is remote-desktopped into the server, and what need I do so we can develop Crystal reports based on BVs from client PCs?

    Hello,
    If you edit reports locally you also need the database client and configured on the local PC also.
    When you use Remote Desktop you are using everything installed on that PC. Remoting in all you are doing is passing the screen updates to your local PC and nothing else.
    Oh, and you should likely install the BOE Client tools on your local PC also.
    Thank you
    Don
    Edited by: Don Williams on Dec 24, 2010 1:44 PM

  • No configuration files exist for this connector?

    I am trying to install Oracle Application Table connector for that I have copied the all files/directory into ConnectorDefaultDirectory but still getting following error.
    No configuration files exist for this connector.
    Ensure that valid configuration XML files exist in the configuration directory.
    Any help?
    thanks
    TK

    I have server/ConnectorDefaultDirectory and when I unzipped the TableResource zip inside ConnectorDefaultDirectory ...... it created following folders
    1. configuration (This folder contains DatabaseApplicationTables-CI.xml)
    2. documentation
    3. lib
    4. ProviderDefinitions
    5. resources
    6. targetsystems-lib
    Can you please let me know what should be configuration file name?
    I have downloaded these zip files from following location
    http://www.oracle.com/technetwork/middleware/id-mgmt/downloads/connectors-101674.html
    thanks for your help
    TK

  • Connector error message stores

    I recently upgraded computers and now have Outlook 2010 and Windows 7. Haven't been able to sync Curve to Outlook since. Getting message "Microsoft Outlook Connector Error" as title and then "No Available Message Stores". Any ideas on how to solve this? Thanks much!

    Hi and Welcome to the Forums!
    Here is a KB that discusses that error:
    KB15564"No available message stores" appears when configuring synchronization settings in BlackBerry Desktop Software
    Hopefully it contains something useful!
    Good luck and let us know!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • ADF Mobile Client : Error while trying to import javax.microedition.*

    Hi,
    JDev throws errors at compile time when I try to deploy a sample ADF Mobile Client application.
    These errors are related to javax.microedition.io.* imports.
    Error(11,29): package javax.microedition.io does not exist
    Error(12,29): package javax.microedition.io does not exist
    Error(180,9): cannot find class HttpConnection
    Error(191,27): cannot find class HttpConnection
    Error(191,42): cannot find variable Connector
    Error(250,49): inconvertible types
    Error(303,40): cannot find variable HttpConnection
    Any pointers as to how these errors could be resolved?
    Is there a JDev Wireless extension that should be installed to resolve these J2ME related errors?
    For JDev 10g, I could locate one such extension called JWE here : http://www.oracle.com/technology/products/iaswe/archive/developer/index.html
    I could not find any similar extension for JDeveloper 11.1.3.
    Regards,
    Prasad.

    Hi, just want to make sure - did you install the ADF MObile Client extension yet? Please go to JDev-Help-Check for Updates-Official Oracle Extensions and Updates, and find Oracle ADF MObile Client Extension in the list. Check it, download it, and then restart JDev. Sounds like the extension was not installed, so it's not able to load any J2ME libraries.
    If you have downloaded the extension already, please go to project properties-libraries and classpath, and then see if the sample app is referencing some third party libraries, for example something from RIM. If so, please double check the path to the library.
    Once you installed the extension, you can also access the ADF Mobile Client developer guide - it contains all the documentation around what you need to install first. Please take a look and see what you need to install - at a minimum, you need to install BlackBerry JDE if you want to deploy to BlackBerry, and Windows Mobile Emulator if you want to test the app on Windows Mobile. Lastly, if you need to synchronize data, then you also need Oracle Database Lite MObile Server installation.
    Thanks,
    Joe Huang

  • Dynamics AX 2012 User Accounts

    I am performing maintenance on a User Account Table, and have One User account that will not allow me to delete.
    Enabled or Disabled, then selecting Delete is returning the following error :
    Stack trace: The company  does not exist.
    Stack trace
    (S)\Data Dictionary\Tables\SysUserInfo\Methods\Delete - line 21
    Where is "line 21"?

    There is no info if it fixed in next release or when will be next release.
    http://daxdilip.blogspot.com/2011/12/how-to-install-and-configure-dynamics.html
    Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"
    Mai Ali | My blog: Technical | Twitter:
    Mai Ali

  • PowerBI Analysis Services Connector Error 403

    Hi all,
    I have a problem with the configuration of PowerBI Analysis Services Connector. I fill all fileds but i have an error in the last step.
    Error description: "The remote server forward an error: Forbidden (403)"
    I don't understand this error because:
    - SSAS acces are granted for my domain\user
    - Office 365 account is the same user
    - SSAS tabular model is granted for this same domain\user
    Who can help me ?
    Thanks

    Brian-
    One other common issue I've seen is the UPN not quite matching. Log onto the SSAS server as the user who's logged into Power BI. Then open a command prompt and run:
    whoami /upn
    Hopefully the UPN it says will match your EffectiveUserName test and will match exactly how you're signing into the Power BI site.
    If that doesn't work, your best bet is to go to
    http://support.powerbi.com/ and click Contact Support and describe this situation and someone from the Power BI support team should get in touch with you to troubleshoot.
    http://artisconsulting.com/Blogs/GregGalloway

  • Database connector error - any suggestion ?

    Hi friends,
    when i m trying to run my reports in UAT environment it gives me error -  'database connector error'
    same reports runnning excellent in dev. server.
    i already checked traces on server - when trying to run from UAT server reports hitting to database and returning database raws - but finally reports not running and getting error
    and one more thing user have all access on SP , databases uses in reports.
    any suggestion ?
    any help is appreciate.
    Thanks.

    Hello,
    I recommend to post this query to the [BusinessObjects Enterprise Administration|BI Platform; forum.
    This forum is dedicated to topics related to administration and configuration of BusinessObjects Enterprise, BusinessObjects Edge, and Crystal Reports Server.
    It is monitored by qualified technicians and you will get a faster response there.
    Also, all BOE Administration queries remain in one place and thus can be easily searched in one place.
    Best regards,
    Falk

  • Unknown Database Connector Error using Crystal Report XI with Windows 7

    My current configuration is:
    Windows XP Professional
    Crystal Reports XI Professional
    Oracle Client 10g
    This is working great, however we are switching to Windows 7 Professional and I need to get this same configuration working on the new machines.
    I have loaded Windows 7 Professional and Oracle Client 10g.  Oracle makes the data connection without any problems.  I loaded Crystal Reports XI Professional, but it will not connect to the Oracle database.  It keeps giving me the Unknown Database Connector error.  Can anyone assist me with this problem?  This is the final software package that is holding up the project. 
    Thanks

    Hello Uher,
    Thanks for quickly response.
    I have attached the details of my issue, the most confuse part is that I'm not sure is there any conflict btw software.
    Appreciating your professional advise.

  • Database Connector Error (ODBC, SYBASE) in CR

    Hi,
    I'm running Crystal Reports 2008 and Business Objects Edge 3.0.
    In CR there is connection to SYBASE database trought SYBASE ODBC driver. This ODBC connection is established on my local computer and on BOE server too.
    When I try to refresh CR reports from Infoview or CMC, an erorr occured - Error in File ~tmp150c5bec67474b0.rpt: Database Connector Error.
    When I open this file in Crystal Reports installed on the BOE server, everything works fine.
    When I open this file in Crystal Reports installed on my local computer, everything works fine.
    Any idea how to solve this?
    Btw, some reports are working fine. I've created some small simple reports (one table or one command) and saved them to the CMS. Refreshing works fine.
    And maybe relevant question to this - I entered all required informations in Database configuration of my CR report (report properties). But BOE even thouht asks for username and password.
    I've tried both "use original database logon informations" and "use custom database logon informations". Same results.
    Thanks in advance
    Peter

    I've uninstalled SAP BO Edge 3.0 and I've installed the version 3.1
    Now it works.
    But still I don't know the reason.

Maybe you are looking for