Configure the maximum session limit of sshd

I have a need to increase the limit of the number of concurrent ssh sessions to a Solaris system. I have found the system's sshd_config file and I see '#MaxStartups 10'. Does this control the limit?
Thanks,
-Kirk

kirk_franks wrote:
I have a need to increase the limit of the number of concurrent ssh sessions to a Solaris system.What limit do you see now? What do you see when attempting to connect beyond this limit? I'm not aware of any pre-set limit on SSH connections.
I have found the system's sshd_config file and I see '#MaxStartups 10'. Does this control the limit?No.
     MaxStartups
             Specifies the maximum number of concurrent unauthenticated con-
             nections to the SSH daemon.  Additional connections will be
             dropped until authentication succeeds or the LoginGraceTime
             expires for a connection.  The default is 10.
[...]So it doesn't affect total completed connections.
Darren

Similar Messages

  • Error-- failed to start a managed process after the maximum retry limit

    hi
    I installed oracle 10g application server. its installed fine. But now i am facing a problem in which i am getting the following error message when i try to start opmnctl from command prompt:
    opmnctl: starting opmn and all managed processes ..
    ======================================================
    opmn id=apps:6200
    0 of 1 processes started.
    ias-instance id=orcl.apps
    +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
    ias-component/process-type/process-set:
    default_group/home/default_group/
    Error
    -->Process (index=1, uid=1845537884, pid=1320)
    failed to start a managed process after the maximum retry limit
    Log:
    D:\product\10.1.3.1\oracleAS_1\opmn\logs\\default_group~home~default_group~1.log
    Please help me in order to remove this, so that i can run oracle apps.
    Regards,
    Aqrs

    Hi
    i checked the log already but there is not such problem defined in it.
    Following is the log generated ion this error:
    Configuration information
    Running in D:\product\10.1.3.1\OracleAS_1
    Operation mode:Startup, App Server, No Enterprise Manager, Single Instance
    Oracle home:D:\product\10.1.3.1\OracleAS_1
    Oracle home name:Unnamed
    Instance name:orcl.apps
    Instance type:allProducts
    Version:10.1.3.1.0
    Uses infrastructure:false
    Not an infrastructure instance, no infrastructure information available
    Components:[j2ee, orabpel, oraesb, owsm, Wsil]
    2009-06-03 01:46:58.609--Begin log output for Mid-tier services (orcl.apps)
    2009-06-03 01:46:58.625--Processing Step: starting OPMN
    2009-06-03 01:47:07.921--Processing Step: starting OPMN managed processes
    2009-06-03 01:48:47.312--End log output for Mid-tier services (orcl.apps)
    An unknown OPMN error has occured
    oracle.appserver.startupconsole.model.ConsoleException: An unknown OPMN error has occured
         at oracle.appserver.startupconsole.control.OPMNController.doStart(OPMNController.java:140)
         at oracle.appserver.startupconsole.control.Controller.start(Controller.java:69)
         at oracle.appserver.startupconsole.control.GroupController.doStart(GroupController.java:47)
         at oracle.appserver.startupconsole.control.Controller.start(Controller.java:69)
         at oracle.appserver.startupconsole.view.controller.ControllerAdapter.start(ControllerAdapter.java:30)
         at oracle.appserver.startupconsole.view.controller.MasterControlAdapter.run(MasterControlAdapter.java:94)
         at oracle.appserver.startupconsole.view.Runner.main(Runner.java:39)
    Caused by: oracle.appserver.startupconsole.model.ConsoleException: There are some errors while stopping the following components. Refer to the generated error report for more details.
    ==================================================
    ias-component: default_group
    process-type: home
    process-set: default_group
    Error Message:failed to start a managed process after the maximum retry limit
    ==================================================
         at oracle.appserver.startupconsole.control.OPMNController.doStart(OPMNController.java:139)
         ... 6 more
    Caused by: oracle.ias.opmn.optic.OpticControlException: Error from opmn during process control operation
         at oracle.ias.opmn.optic.AbstractOpmnEntity.runCommand(AbstractOpmnEntity.java:174)
         at oracle.ias.opmn.optic.AbstractOpmnEntity.start(AbstractOpmnEntity.java:110)
         at oracle.appserver.startupconsole.control.OPMNController.doStart(OPMNController.java:97)
         ... 6 more
    Exception caused by
    There are some errors while stopping the following components. Refer to the generated error report for more details.
    ==================================================
    ias-component: default_group
    process-type: home
    process-set: default_group
    Error Message:failed to start a managed process after the maximum retry limit
    ==================================================
    oracle.appserver.startupconsole.model.ConsoleException: There are some errors while stopping the following components. Refer to the generated error report for more details.
    ==================================================
    ias-component: default_group
    process-type: home
    process-set: default_group
    Error Message:failed to start a managed process after the maximum retry limit
    ==================================================
         at oracle.appserver.startupconsole.control.OPMNController.doStart(OPMNController.java:139)
         at oracle.appserver.startupconsole.control.Controller.start(Controller.java:69)
         at oracle.appserver.startupconsole.control.GroupController.doStart(GroupController.java:47)
         at oracle.appserver.startupconsole.control.Controller.start(Controller.java:69)
         at oracle.appserver.startupconsole.view.controller.ControllerAdapter.start(ControllerAdapter.java:30)
         at oracle.appserver.startupconsole.view.controller.MasterControlAdapter.run(MasterControlAdapter.java:94)
         at oracle.appserver.startupconsole.view.Runner.main(Runner.java:39)
    Caused by: oracle.ias.opmn.optic.OpticControlException: Error from opmn during process control operation
         at oracle.ias.opmn.optic.AbstractOpmnEntity.runCommand(AbstractOpmnEntity.java:174)
         at oracle.ias.opmn.optic.AbstractOpmnEntity.start(AbstractOpmnEntity.java:110)
         at oracle.appserver.startupconsole.control.OPMNController.doStart(OPMNController.java:97)
         ... 6 more
    <?xml version='1.0' encoding='WINDOWS-1252'?>
    <response>
    <msg code="-82" text="Remote request with weak authentication.">
    </msg>
    <opmn id="apps:6200" http-status="204" http-response="0 of 1 processes started.">
    <ias-instance id="orcl.apps">
    <ias-component id="default_group">
    <process-type id="home">
    <process-set id="default_group">
    <process id="1848837552" pid="3128" status="Stop" index="1" log="D:\product\10.1.3.1\OracleAS_1\opmn\logs\\default_group~home~default_group~1.log" operation="request" result="failure">
    <msg code="-21" text="failed to start a managed process after the maximum retry limit">
    </msg>
    </process>
    </process-set>
    </process-type>
    </ias-component>
    </ias-instance>
    </opmn>
    </response>
    Could u plz guide now ?

  • Failed to start a managed process after the maximum retry limit

    Hi,
    Getting the following error
    /app/oracle/product/101202/opmn/bin (OID)>opmnctl startproc ias-component=OID
    opmnctl: starting opmn managed processes...
    ================================================================================
    opmn id=smtest02:6202
    0 of 1 processes started.
    ias-instance id=infra.smtest02
    ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
    ias-component/process-type/process-set:
    OID/OID/OID
    Error
    --> Process (pid=26032)
    failed to start a managed process after the maximum retry limit
    Log:
    /app/oracle/product/101202/opmn/logs/OID~1
    Any suggestions
    Thanks
    Kedar

    Hi Alvarez
    I have managed to start OID
    stop the process using opmnctl stopall
    stop the database
    stop the listener
    stop emctl processes
    usind oidctl to stop OID instance
    start the listener
    start the database
    start the process opmnctl startall
    start emctl start iasconsole
    used oidctl to star instance for OID
    /app/oracle/product/101202/bin (OID)>cd ../opmn/bin
    /app/oracle/product/101202/opmn/bin (OID)>opmnctl status
    Processes in Instance: infra.smtest02
    ------------------------------------------------+---------
    ias-component | process-type | pid | status
    ------------------------------------------------+---------
    LogLoader | logloaderd | N/A | Down
    dcm-daemon | dcm-daemon | 7763 | Alive
    DSA | DSA | N/A | Down
    HTTP_Server | HTTP_Server | 6183 | Alive
    OID | OID | 6187 | Alive
    but when i am trying to start dbconsole ( command below) getting follwong error OC4J Configuration issue. /app/oracle/product/101202/oc4j/j2ee/OC4J_DBConsole_smtest02_OID not found.
    emctl start status dbconsole
    /app/oracle/product/101202/oc4j/j2ee/OC4J_DBConsole_smtest02_OID ---> /app/oracle/product/101202/oc4j/j2ee/OC4J_DBConsole_smtest02_ORACLEID
    where can i change the setting for the parameter so that i can log on to dbconsole from the browser, which config file ?
    the reason i needed dbconsole was to use Oracle Directory Naming GUI to configure db to replace old Names Server hence i need Db console GUI
    Kedar

  • Opmnctl failed-"start managed process after the maximum retry limit"-URGENT

    Hi All,
    I tried to start the opmn process after configuring BIGIP and securing the OMS.But opmnctl startall failed saying unable to start "HTTP_Server".
    [aime@stamt02 ~/TC3]$ ./oms10g/opmn/bin/opmnctl startall
    opmnctl: starting opmn and all managed processes...
    ================================================================================
    opmn id=stamt02:6200
    5 of 6 processes started.
    ias-instance id=EnterpriseManager0.stamt02.us.oracle.com
    ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
    ias-component/process-type/process-set:
    HTTP_Server/HTTP_Server/HTTP_Server
    Error
    --> Process (pid=30117)
    failed to start a managed process after the maximum retry limit
    Log:
    /scratch/aime/TC3/oms10g/opmn/logs/HTTP_Server~1
    log file says :
    [aime@stamt02 conf]$ tail -f /scratch/aime/TC3/oms10g/opmn/logs/HTTP_Server~1
    07/04/24 04:29:24 Start process
    /scratch/aime/TC3/oms10g/Apache/Apache/bin/apachectl startssl: execing httpd
    07/04/24 04:29:29 Start process
    /scratch/aime/TC3/oms10g/Apache/Apache/bin/apachectl startssl: execing httpd

    Same problem for me also.
    I could start all other process except HTTP
    while starting that it is show a mesg as follows
    ------------------------------------------------+---------
    ias-component | process-type | pid | status
    ------------------------------------------------+---------
    DSA | DSA | N/A | Down
    HTTP_Server | HTTP_Server | N/A | Down
    LogLoader | logloaderd | N/A | Down
    dcm-daemon | dcm-daemon | N/A | Down
    OC4J | home | 3596 | Alive
    [oracle@mrk bin]$ ./opmnctl startall
    opmnctl: starting opmn and all managed processes...
    ================================================================================
    opmn id=mrk.mydomain.com:6200
    0 of 1 processes started.
    ias-instance id=ias_hns.mrk.mydomain.com
    ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
    ias-component/process-type/process-set:
    HTTP_Server/HTTP_Server/HTTP_Server
    Error
    --> Process (pid=3860)
    failed to start a managed process after the maximum retry limit
    Log:
    /u01/Oracle10gAS/opmn/logs/HTTP_Server~1
    Please any one help me.
    mail me at [email protected]
    Thanks in advance

  • The following files weren't attached because adding them would cause the message to exceed the maximum size limit of 35 MB: MALAWI .pptx.

    The following files weren't attached because adding them would cause the message to exceed the maximum size limit of 35 MB.
    I have had my macbook pro since June and have had no problems sending an email until I have tried to send a presentation today. The above message is what I keep receiving even after using 3 email accounts.

    Email providers often set file size limitations to conserve bandwidth and prevent service overload.  Most common seems to be a limit on the order of 21 MB.  If possible, break your presentation into two parts and send as two messages.

  • The following files weren't attached because adding them would cause the message to exceed the maximum size limit of 10 MB

    Dear sir/madam 
    I installed exchange server 2013 
    my clients want to attache more than 10 MB 
    when they attache more than 10 MB they got this massage "The following files weren't attached because adding them would cause the message to exceed the maximum size limit of 10 MB"
    so how can you help me to increase the attachment size and the way to do that 
    how can I change the default 10 MB  
    Please can you help me as soon as
    Rawa Zangana  

    Hi Rawa,
    You can use EAC or EMS to set the MaxSendSize. The default value of MaxSendSize is 10 MB.
    If you use EAC, here is the steps:
    Logon to EAC -> Mail flow -> Receive connectors -> settings-> type the Maximum send message size you want to set
    If you use EMS, please use the cmdlet Rajith provided.
    Hope it helps.
    Best regards,
    If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Amy Wang
    TechNet Community Support

  • IPod Shuffle: How to set the maximum volume limit

    How do I get back to the volume default I set at the onset of using my shuffle?
    I have speakers in my Ski Helmet and would now like to turn up the volume louder than I have currently set for my in ear earpods.
    Any help is appreciated.
    b

    If you're talking about the Maximium Volume Limit:
    Setting the Maximum Volume Limit
    You can set a limit for the maximum volume on iPod shuffle. You can also set a
    password in iTunes to prevent this setting from being changed by someone else.
    If you’ve set a volume limit on iPod shuffle, the status light blinks orange three times if
    you try to increase the volume beyond the limit.
    To set the maximum volume limit for iPod shuffle:
    1 Set iPod shuffle to the desired maximum volume.
    2 Connect iPod shuffle to your computer.
    3 In iTunes, select iPod shuffle in the Source pane.
    4 Click the Settings tab.
    5 Select “Limit maximum volume.”
    6 Drag the slider to the desired maximum volume.
    The initial slider setting shows the volume the iPod shuffle was set to when you
    selected the “Limit maximum volume” checkbox.
    7 To require a password to change this setting, click the lock and enter a password.
    If you set a password, you must enter it before you can change or remove the
    maximum volume limit.
    Note: The volume level may vary if you use different earphones or headphones.
    To remove the maximum volume limit:
    1 Connect iPod shuffle to your computer.
    2 In iTunes, select iPod shuffle in the Source pane.
    3 Click the Settings tab.
    4 Deselect “Limit maximum volume.”
    Enter the password, if required.
    Note: If you forget the password, you can restore iPod shuffle. See “Updating and
    Restoring iPod shuffle Software” on page 26 for more information.

  • What is the maximum size limit for a KM document to be uploaded?

    Hi,
    1.  I have a requirement, wherein the user wants to upload a document which is more than 448MB in KM.
    I am not sure what is the maximum limit that standard SAP provides by default, which I can advice the user at the first place.
    2. what if we want to increase the max limit of the size?Where do we do that, can you suggest me the path for the same?
    Thanks in advance.
    Regards
    DK

    Hello,
    CM Repository in DB Mode:
    If there is a large number of write requests in your CM usage scenario, set up the CM repository in database mode. Since all documents are stored in the database, this avoids unintentional
    external manipulation of the data.
    CM Repository in FSDB Mode:
    In this mode, the file system is predominant. If files are removed from or added to the file system, the database is updated automatically.
    If you mainly have read requests, choose a mode in which content is stored in the file system. If this is the case, make sure that access to the relevant part of the file system is denied or
    restricted to other applications.
    What is the maximum size of the document that we can upload in a CM (DB) and CM (FSDB) without compromising the performance ?
    There are the following restrictions for the databases used:
    ·  Maximum number of resources (folders, documents) in a repository instance
       FSDB: No restriction (possibly limited by file system restrictions)
       DBFS and DB: 2,147,483,648
    ·  Maximum size of an individual resource:
       FSDB: No restriction (possibly limited by file system restrictions)
       DBFS: 8 exabytes (MS SQL Server 2000), 2 GB (Oracle)
       DB: 2 GB
    Maximum length of large property values (string type):2,147,583,647 byte
    What is the impact on the performance of Knowledge Management Platform and on Portal Platform when there are large number of documents that are in sizes somewhere from 100 MB to 500 MB or more.
    The performance of the KM and Portal platform is dependent on the type of activity the user is trying to perform. That is a heavy number of retrievals of the large documents stored in the repository for
    read/write mode decreases the performance of the patform. Searching and indexing in the documents will also take a propertionate amount of time.
    For details, please refer to,
    http://help.sap.com, Goto "KM Platform" and then,
    Knowledge Management Platform   > Administration Guide
    System Administration   > System Configuration
    Content Management Configuration   > Repositories and Repository
    Managers    > Internal Repositories   > CM Repository Manager
    Technically speaking the VM has a restriction according to plattform.  W2k is somewhere around 1,2G and Solaris, I believe, 4G.
    Say for instance I was on a W2k box I allotted 500+ for my J2EE Engine that would leave me with the possiblity to upload close to 600mb documents max.
    See if the attached documents (610134, 634689, 552522) can provide you some guidance for setting your VM to meet your needs.
      SUN Documentation
      Java HotSpot VM Options
            http://java.sun.com/docs/hotspot/VMOptions.html
      How to tune Garbage collection on JVM 1.3.1
            http://java.sun.com/docs/hotspot/gc/index.html
      Big Heaps and Intimate Shared Memory (ISM)
            http://java.sun.com/docs/hotspot/ism.html
    Kind Regards,
    Shabnam.

  • How to calculate the maximum session for Confernecing and Xcoder on VG

    Hi All
    Please help me to understand the logic and concept that how we can calculate the number of session that we can define for the Conferencing and Xcoder  Configuration on the VG.
    Regards
    Chaman

    Hi Jaime
    Thanks for Reply.
    I created the Dsp profile . According to ISR i configured the Sessions . But i want to know the exact concept how to calcluate and if suppose i want some modification in future according to the conference calls that i want to support how do i calculate??
    dspfarm profile 2 transcode 
    codec g729abr8
    codec g729ar8
    codec g711alaw
    codec g711ulaw
    codec g729r8
    codec g722-64
    maximum sessions 13
    associate application SCCP
    dspfarm profile 1 conference 
    codec g729br8
    codec g729r8
    codec g729abr8
    codec g729ar8
    codec g711alaw
    --More--                            codec g711ulaw
    maximum conference-participants 16
    maximum sessions 3
    associate application SCCP

  • Maximum Sessions Limit Reached???

    SUN ONE IS 6.0 + SP1
    After several hours' working, all login requests will be directly rejected with this message. And I enter the amconsole as amadmin, but there are only 20~30 sessions.
    Where to set up maximun session number??
    some guy said: Service Configuration>>Portal Desktop>>Maximum Number of Client Sessions
    But why I can not find it in my sun one IS???
    I just defined following session configurations,
    Maximum Session Time = 525600
    Maximum Idle Time = 30
    Maximum Caching Time = 0
    The problem have been confusing me for couple weeks...
    Thanks.

    Look into the following key in your AMConfig.properties file:
    com.iplanet.am.session.maxSessions
    I believe it defaults to 5000; you may need to increase it.

  • In DeskI, what's the maximum for "Limit size of long text objects"? 2000?

    In Universe Designer, we have a setting which is "Limit size of long text objects", it can control how many characters can be displayed for long text objects.
    The problem is that in DeskI, we can only display 2000 characters even we set 2500 or more in Universe Designer by "Limit size of long text objects". But if we use the same Universe & same Database, WebI can show 2500 or more characters for long text objects.
    So does it mean in DeskI the maximum value for "Limit size of long text objects" is 2000?

    Hi Jason,
    Check that the object in the universe is set to data type "long text".
    Also check that the object itself is not limiting the length of the string, as well as that the entire string is actually in the database... the data type here could also be the issue.
    Hope this helps
    Jacques

  • What is the Maximum Size limit for a Mailbox?

    Hi,
    I am a newbie to mac, before i use pc and Ms Outlook for the email application.
    Can anyone help me on these question:
    A. What is the maximum limit of a mailbox size?
    (in Ms Outlook, the max size of the .pst file is 2gb, we will have problem when our email mailboxes getting close to 2gb.)
    B. If the mailbox reaches the max. limit, how can we archives the old email?
    Thanks &Regards,
    Prasti.
    061122
    macbookpro   Mac OS X (10.4.8)  

    Hi Prasti.
    I believe the following article answers your questions:
    Overstuffed mailbox is unexpectedly empty

  • Increase the Maximum Debuggers Limit

    Hi all,
       Am trying to debugg a background job through SM50
    But i get an error stating the maximum no debugging sessions crossed
    is there any way to increase this by any customization
    Regards
    Simin.R

    this is not reomended in production system since debugging can effect performance of the system
    you can increase the parameter "rdisp/wpdbug_max_no" for increasing the number of debug sessions
    Samrat

  • Waht is the maximum session expire time?

    i have a web application with login.It does not work when my app reaches the threshold session time.
    What is the maximun time for session??

    Depends per appserver. Refer its documentation / configuration. The default is usually 30 minutes.
    You can however configure it yourself per webapp using <session-config> in the web.xml.

  • What is the maximum credit limit for this card?

    So I've had my Total Rewards Visa Signature for the past 18 months...started at 10k, always SP CLI every 4 months. Always got 4K CLI at a minimum but yesterday I only got a 2K.  The card is now at 30K.  Anyone ever get this card go beyond 30K or is that the maximum for this card?

    I don't think there is a maximum. I'm sure it's relative to income. I haven't seen it higher than 30k.

Maybe you are looking for