Configuring Application Explorer for PeopleSoft Adapter

hi,
I am trying to configure Orace AS Adapter for PeopleSoft.
One of the steps is to change the "lcp" for Application Explorer. as shown below
What is LCP here and how do we change it?
"Alter the JDBC driver path in Application Explorer's lcp. For example:
lcp=..\lib\orabpel-adapters.jar;C:\jdev\jdbc\lib\ojdbc14.jar;C:\jdev\jdbc\lib\nls_charset12.jar;%lcp%
to
lcp=..\lib\orabpel-adapters.jar;..\..\..\jdbc\lib\ojdbc14.jar;..\..\..\jdbc\lib\nls_charset12.jar;%lcp%"

Hi Siva,
I did check the bat file. But there is not existing code that sets the lcp in this bat file. Quite different from what the documentation says as quoted in my previous first post.
It executes the following code
set IWAY55=D:\product\10.1.3.1\orasoa\adapters\application
set IWAY55OEM=oracle
iaexplorer.exe"

Similar Messages

The Help Link from the Application Pages Does not Work for Peoplesoft Campus Solutions 9.0

Hi everyone.
I have a problem, I have been trying to set up the Help Link from the Application Pages for Peoplesoft Campus Solutions 9.0 according to the instructions given in the Document: http://docs.oracle.com/cd/E17566_01/epm91pbr0/eng/psbooks/EnablingtheHelpLinkfromApplicationPages.pdf , (referenced in the Doc ID 1289101.1, E-PB: How to Set Up the Context Sensitive Help with Hosted PeopleBooks using Universal Linking).
I follow the instructions of that document carefully:
I go to: PeopleTools -> Web Profile -> Web Profile Configuration
    2. Then I choose the Web Profile: "Development".
    3. Then Change the value for the Help URL field by entering the following URL format: http://www.oracle.com/pls/topic/lookup?id=%CONTEXT_ID%&ctx=hrcs90r5 , the ctx parameter selected is the one that correspond to the Campus Solutions (hrcs90r5) according to the Product Line Code Table (ULinkID) especified in the mentioned document.
    4. Stop the Web Domain and Clear cache.
    5. Start the Web Domain again.
After setting up the Web Profile Configuration I test the help links, thas is why I click in the Help link in any Peoplesoft CS 9.0 Application Page (modify a person), but the next error message appears: "We're sorry, the topic you requested was not found.".
I tried many combinations with the ctx parameters URL but it does not work yet.
I did the same test, but this time using the Help URL field with a HRMS ctx parameter by entering the following URL format: http://www.oracle.com/pls/topic/lookup?id=%CONTEXT_ID%&ctx=hcm92pbr5 , and It works fine !!!
According to the previous test you realize that It works with HRMS ctx parameter but not with Campus Solutions 9.0 ctx parameter, Does anybody know what else can I do ? Am I doing anything wrong or missing? or maybe the Oracle's ctx parameter for Campus Solutions URL It is broken simply.
Thanks for you help and feedback.

2799444 - The page you are testing with appears to be a Workforce Administration page. Is that correct?
The CS PeopleBooks would only work for CS pages, e.g.: try navigating to Main Menu > Campus Community > Personal Information > Add/Update a Person
Also, you can use multiple ctx parameters:
E.g.: http://www.oracle.com/pls/topic/lookup?id=%CONTEXT_ID%&ctx=hrcs90r5&ctx=hcm92pbr5&ctx=pt852pbh2
This way the help would work for the HR related pages like Workforce Administration, Campus Solutions pages like Campus Community and also PeopleTools pages like Web Profile Configuration. Hope this clarifies your question. Thanks!

Application explorer needed

Hi,
I need an application explorer for using SAP adapters. I am able to download version 2.3.But the zip file is not getting extracted.Can anyone please send me the zip file?
[email protected]

Its available at the BEA download site when you select to download any adapter.
"kirtan patel" <[email protected]> wrote:
>
Could any one plz tell me where do i get the Application Explorer .exe
file i mean
the beabse.exe file ,coz on the installation guide then link given has
no such
file contained in it

Message Archiving for the Adapter Engine

Hi,
we have configured archiving for Integration Engine (SXMB_MONI) messages on the Production XI System. is it necessary to configure Message Archiving for the Adapter Engine also ? in which scenarios archived adapter messages are useful ? are there any other advantages/disadvantages for this(in case of errored messages on the adapter engine) ? Please share any ideas.
Thanks
Pavan.

>>is it necessary to configure Message Archiving for the Adapter Engine also
Not necessary,but depends upon the scenario,lets say you are posting messages to external partner's FTP and there was some issue in connectivity due to which file was not delivered,in this case you need to send the message again.
same thing can happen in inbound messages too.
>>in which scenarios archived adapter messages are useful ?
i would do this specifically for JDBC sender coz once you pick up the files based upon SQL query,you change the flag so that those values are not picked next time,in this case you can't re-run the old query and get same results.
this also holds for proxies and file too.
Thanx
Aamir

You are not licensed for TA Adapter. Service disabled.,

we had error message like
TIDAL Log shows “ You are licensed to connect the client” to run the TIDAL batch job it’s failing.
4375678,09/03/2014 03:15 AM,Audit,You are not licensed for WebService Adapter. Service disabled.,Client,,,,,1000,ENAW-VXD21P,,
4375677,09/03/2014 03:15 AM,Audit,You are not licensed for TA Adapter. Service disabled.,Client,,,,,1000,ENAW-VXD21P,,
4375676,09/03/2014 03:15 AM,Audit,You are not licensed for Horizon Adapter. Service disabled.,Client,,,,,1000,ENAW-VXD21P,,
4375675,09/03/2014 03:15 AM,Audit,You are not licensed for MSSql Adapter. Service disabled.,Client,,,,,1000,ENAW-VXD21P,,
4375674,09/03/2014 03:15 AM,Audit,You are not licensed for OracleApps Adapter. Service disabled.,Client,,,,,1000,ENAW-VXD21P,,
4375673,09/03/2014 03:15 AM,Audit,You are not licensed for PeopleSoft Adapter. Service disabled.,Client,,,,,1000,ENAW-VXD21P,,
4375672,09/03/2014 03:15 AM,Audit,You are not licensed for Oracle Database Adapter. Service disabled.,Client,,,,,1000,ENAW-VXD21P..
after reboot our master server issue got fixed.. could you please help me to understand what was issue .. how to avoid this situation in future
Regards
Karthikeyan J

The fact that if you use 1280 it allows successful calls suggests your line is set as CPS , carrier pre select, if this has just happened it suggests a CPS provider has taken your 'line' for calls if not for line rental, but it's not properly set up otherwise calls would terminate it would just be billed by the mystery CPS provider
Have you had any approach by company's that sell this product ?, sometimes ISP's who's product includes calls can use CPS, if not, and you haven't been 'slammed' you need BT to set your line as non CPS , so BT handle your calls automatically without using 1280
This should be easy to get done, but the drones that answer the calls probably won't have a clue, hence the 'it must be your handset' nonsense they come up with, report the line faulty,don't accept an appointment, and insist they sent the problem to what was once called BT Operate, they look after the telephone exchange equipment and it's 'data',

How to configure BAAN or PeopleSoft adapter?

Hi,
Can anyone please provide me an online guide that helps me with the steps involved in configuring a BAAN or PeopleSoft or any other application adapter?
Thanks,

Hi,
See the below links
/people/sap.user72/blog/2003/10/24/what-peoplesoft-earnings-mean
/people/alessandro.guarneri/blog/2006/03/27/sap-xi-lookup-api-the-killer
/people/prasadbabu.nemalikanti3/blog/2006/02/24/collecting-and-bundling-vendor-records-from-different-multiple-interfaces-file-systempeoplesoft-and-sending-to-sap-r3-system-part-1
/people/prasadbabu.nemalikanti3/blog/2006/02/27/collecting-and-bundling-vendor-records-from-different-multiple-interfaces-file-systempeoplesoft-and-sending-to-sap-r3-system-part-2
/people/sap.user72/blog/2003/07/08/single-vs-multi-vendor-it-shops
/people/mark.finnern/blog/2004/11/22/palo-alto-event-sensornet-queries-and-data-acquisition
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/327dc490-0201-0010-d49e-e10f3e6cd3d8
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/34a1e590-0201-0010-2c82-9b6229cf4a41
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b501be90-0201-0010-5b9a-9852b412fb2f
https://www.sdn.sap.com/irj/sdn/advancedsearch?cat=sdn_weblog&query=peoplesoft&adv=false&sortby=cm_rnd_rankvalue
Regards
chilla..

How do I access "Firefox is NOT compatible with this application. For best performance, please use Internet Explorer 5.0 and above...." web sites; when I try to download any alternate browser, then a warning that alternate is "imcompatable with your opera

How do I access websites that warn: "Firefox is NOT compatible with this application. For best performance, please use Internet Explorer 5.0 and above...."? When I try to download any alternate browser, all I get is another warning that the alternate is "not compatible with your operating system." Is Firefox preventing this? The site listed below is a job application site. I've had this same problem with other job application sites also.
== URL of affected sites ==
https://storefront.kenexa.com/lithia/cc/Home.ss

There should be a User Agent Switcher menu item under Tools, which gives you the browser names you can impersonate.
The menu item name changes to the browser UA you are presently using.
There is also a User Agent Switcher button, you can add it using View -> Toolbars -> Customize, and dragging the button to your toolbar.
See http://chrispederick.com/work/user-agent-switcher/features/ and http://chrispederick.com/work/user-agent-switcher/help/
You can just start trying IE versions (or the versions it says on the site) until it lets you in.

How to configure simultanous access for 11i application

Hi All
We have one existing 11i application instance on node grid1.In which we start the servicess from apps user.
In our same we want another node for the same application in which we will start the servicess from another user(merge)
For that we perfrom the following steps
1.Copy the APPL_TOP,COMMON_TOP,ORA_TOP(8.0.6,iAS) from node "GRID1" to diffrent node "GRID2"
2 configure the GRID2 node using adcfgclone.pl utility(we have configure new node for WEB and FORM Server)
3 We perfrom the modification in the following files ON GRID2 .
i Identify 'FNDNAM=apps' statement in $FND_TOP/secure/<context>.dbc
and replace with 'FNDNAME=merge' to connect to MERGE schema instaed of APPS.
ii. Go to the last line of $APACHE_TOP/jserv/etc/zone.properties file
and identify 'schema=APPS' statement and change it to 'schema=MERGE'
iii. Identify below lines in $APACHE_TOP/modplsql/cfg/wdbsvr.app file
password = apps
     username = apps
     document_table = APPS.fnd_lobs_document
and replace with modified below lines
password = merge
     username = merge
     document_table = MERGE.fnd_lobs_document
6. For redirecting user's request to new Application Server server, we
changed the following 4 system profile options with proper URL and port
at responsibility level only for the responsibilities,
which we use for Merge views.
Profile Options
     Application Framework Agent
     Applications JSP Agent
     Applications Web Agent
     Apps Servlet Agent
When we are able to start the services on GRID2 node,but at the time of login we are getting invalid user name/ passwd error
Please let us know is there any way to access application other than apps user
Regards
Sohail

well thank you very much .I know how to define a DataSource inside Weblogic Server.
But i am confused over one issue
When We are going to use Container Managed EntityManager inside the SessionBean the persistence.xml file looks like this
*<persistence>*
*     <persistence-unit name="RamsEJBPU" transaction-type="JTA">*
*          <jta-data-source>myJtaDataSource</jta-data-source>*
*     </persistence-unit>*
*</persistence>*
But in some cases it looks like as shown below :     <persistence-unit name="RamsEJBPU" transaction-type="resource-local">
     <provider>org.hibernate.ejb.HibernatePersistence</provider>
                  <properties>
               <property name = "hibernate.connection.driver_class" value = "oracle.jdbc.driver.OracleDriver"/>
               <property name = "hibernate.connection.url" value = "jdbc:oracle:thin:@localhost:1521:orcl"/>
               <property name = "hibernate.connection.username" value = "CHENNAISPAT"/>
               <property name = "hibernate.connection.password" value = "CHENNAISPAT"/>
            </properties>
     </persistence-unit>
</persistence>Can you please tell me why is it so ??

Need Dynamic attributes for XI adapter to use in Dynamic Configuration ..!!

Hi Friends,
We are planning send message to different receivers through XI adapter by using Dynamic Configuration.
Can anyone please tell me what are the dynamic attributes used for XI adapter.
In my scenario, I want to pass the Service Number and Path prefix of XI adpater dynamically by using sender ID from Idoc payload.
I know how to use the dynamic configuration UDF in message mapping. But I don't know the dynamic attributes which we can pass to Service Number and Path prefix of XI adpater.
Kindly suggest ..
Thanks
Deepthi.

Hi Sourabh,
>> You need to set these attributes explicitly in the adapter configuration..
Can you please elaborate on this like how to implement this? Do we need to use any module configuration in the adapter?
We will use XI adapter only while sending the data directly from IE without using any feautures of AE (like adapters, modules etc). It is like directly sending data from ABAP stack without using J2EE stack. That is the reason we can't use any Modules in XI adpater and it is in disabled by default.
When I checked in SXMB_MONI.. as you said details are found in
- <SAP:Attribute>
<SAP:Name>host</SAP:Name>
<SAP:Value>10.190.25.16</SAP:Value>
</SAP:Attribute>
- <SAP:Attribute>
<SAP:Name>httpDestination</SAP:Name>
<SAP:Value />
</SAP:Attribute>
- <SAP:Attribute>
<SAP:Name>path</SAP:Name>
<SAP:Value>/rcvA/receiver</SAP:Value>
</SAP:Attribute>
- <SAP:Attribute>
<SAP:Name>port</SAP:Name>
<SAP:Value>8210</SAP:Value>
</SAP:Attribute>
XI adapter uses mainly three parameters Host, Port and Path.
I want to pass any two of these values dynamically to achieve my solution. Can you please suggest your solution how we can implement it.
-Deepthi.

URL For J2SE Adapter Engine Configuration

Hi All,
I have to go for adapter configuration for that i need to go to Adapter Engine Configuration Screen. So can any one please tell me the URL for going to the particular screen.
Regards,
Rahul

Hi rahul,
I think URL for J2SE adapter engine is http://hostname:portname. Just check following link :
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/6f/246b3de666930fe10000000a114084/frameset.htm">J2SE ADAPTER ENGINE</a>
Regards,
Keith.

Cannot install trial for Adobe Acrobat XI Pro on my computer - After I select download, I receive this message: This application cannot be installed because this installer has been mis-configured. Please contact the application author for assistance.

Cannot install trial for Adobe Acrobat XI Pro on my computer - After I select download, I receive this message: This application cannot be installed because this installer has been mis-configured. Please contact the application author for assistance. Have tried doing so from multiple browsers.
Please let me know how to download the trial version.
Thank you.

Try downloading Acrobat Pro XI using below link. Then try to installing it once again.
Download Acrobat products | Standard, Pro | XI, X

How to create a Menu for PeopleSoft HRMS application program ?

Folks,
Hello. I am developing PeopleSoft HRMS application program for a client. I have created 10 components. But I don't understand how to create a Menu on the left handside for users to access the components. The Menu's structure is as follows:
Folder Root containing Folder1, Folder2.
Folder1 containing Folder1a, Folder1b.
Folder2 containing Folder2a, Folder2b.
Folder1a containing Component1, Component2.
Folder1b containing Component3, Component4.
Folder2a containing Component5, Component6, Component7.
Folder2b containing Component8, Component9, Component10.
The Folder Root should appear in the Menu on the left handside. A user can reach Compoent1 by clicking
Folder Root -> Folder1->Folder1a ->Component1.
Can any folks tell me how to create such a hiearachical Menu ? Thanks.

Folks,
Hello. Thanks a lot for replying to me. By using PeopleTools->Portal->Structure and Content Reference, I have created the hierachical folder groups:
FolderRoot containing Folder1 and Folder2
Folder1 -> Folder1a -> the link to a Component
Folder1 -> Folder1b -> the link to a Component
Folder2 -> Folder2a -> the link to a Component
The above hierachical folder groups have appeared on the left handside under "Menu" and work correctly.
But when click on "FolderRoot", "Folder1" and "Folder2" don't appear under "FolderRoot" on the right handside of the screen. When click on "Folder1", "Folder1a" and "Folder1b" don't appear under "Folder1" on the right handside of the screen.
I have checked PeopleTools ->Portal -> Structure and Content Reference's folder administration, there are no places to type in information to have children folders appear under its parent folder on the right handside of the screen.
My question is :
How to make children folders appear under its parent folder on the right handside of the screen ?

Configuration for JMS Adapter Sensor action and JMS Queue sensor action..!!

Hi,
Id like my BPEL process to send an XML message to JMS on Websphere,I was able to do this through a JMS adapter.But I would more like to add sensors into my process which would really do the same thing - send an XML message to JMS Q.
Now I understand that there are two ways to do this,JMS Queue and JMS Adapter - thorugh bpel sensor action.
I am able to use JMS Queue and it works fine , but adds its own xml tags to the message,Is there any way I could send only my xml payload as a message to the queue??
Also could any1 tell me what is the configuration for JMS Adapter sensor action?
Any suggestions how do I go about it??

Hey Anirudh,
Thanx for the response :-)
All these hold good when I have an AQ adaptor right,But the thing is I want to send a message to a 'JMS' queue with out actually using an adapter configuration wizard and everythng..So I resolved to JMS queue Sensor action..Heres the xml snippet from the sensorAction.xml files which is generated..
<actions targetNamespace="http://xmlns.oracle.com/Test_JMS_Logging" xmlns="http://xmlns.oracle.com/bpel/sensor" xmlns:tns="http://xmlns.oracle.com/Test_JMS_Logging" xmlns:pc="http://xmlns.oracle.com/bpel/sensor">
<action name="JMS_LogEntry" publishName="" publishType="JMSQueue" enabled="true" filter="" publishTarget="jms/L_Queue">
<property name="JMSConnectionFactory">jms/L_QueueCF</property>
<sensorName>ActivitySensor_JMS</sensorName>
</action>
</actions>
This works grt and adds messages to the queue..But adds its own header info according to the sensor.xsd loacted at the Oracle_home\bpel\system\xmllib\ folder.
Right now the XML message added to the Queue is:-
<actionData xmlns="http://xmlns.oracle.com/bpel/sensor">
<header>
<sensor sensorName="ActivitySensor_JMS" classname="oracle.tip.pc.services.reports.dca.agents.BpelActivitySensorAgent" kind="activity" target="AddLEntr
y" xmlns:pc="http://xmlns.oracle.com/bpel/sensor" xmlns:ns2="http://www.ulrhome.com/2008/10/L_Entry" xmlns:tns="http://xmlns.oracle.com/Test_JMS">
<activityConfig evalTime="completion">
<variable outputDataType="string" outputNamespace="http://www.w3.org/2001/XMLSchema" target="$WriteL_Produce_Message_InputVariable/L_Entry/ns2:L_Entry/ns2:LCName"/>
</activityConfig>
</sensor>
<instanceId>950016</instanceId>
<processName>Test_JMS</processName>
<processRevision>v2009_04_15__40833</processRevision>
<domain>default</domain>
<timestamp>2009-04-15T11:21:23.596-04:00</timestamp>
<midTierInstance>app01.ulrhome.com:9700</midTierInstance>
</header>
<payload>
<activityData>
<activityType>scope</activityType>
<evalPoint>completion</evalPoint>
<durationInSeconds>0.011</durationInSeconds>
<duration>PT0.011S</duration>
</activityData>
<variableData>
<dataType>12</dataType>
<data>
<ns0:LCName xmlns:ns0="LC_Test1http://www.ulrhome.com/2008/10/L_Entry">LC_Test1</ns0:LCName>
</data>
<queryName/>
<target>$WriteL_Produce_Message_InputVariable/L_Entry/ns2:L_Entry/ns2:LCName</target>
<updaterName>AddL_Entry</updaterName>
<updaterType>scope</updaterType>
</variableData>
</payload>
</actionData>
My requirement is that I need to add a sensor to the BPEL process which posts 'Only my payload message to the JMS queue'..
What I would want the message in the Queue to be is : -
<data>
<ns0:LCName xmlns:ns0="LC_Test1http://www.ulrhome.com/2008/10/L_Entry">LC_Test1</ns0:LCName>
</data>
Also while creating a Sensor action I get another option as JMS Adaptor,I am not sure of what value to type in this wizard..Heres what I keyed in..M sure this is not right..Cos it dosnt work :-)
<action name="SensorAction_JMS" publishName="" publishType="JMSAdapter" enabled="true" filter="" publishTarget="jms/LoggingQueue">
<property name="JMSConnectionName">Log</property>
</action>
</actions>
Could any 1 tel me what values are the right values..And does JMS Adapter mean that I have to create a JMS Apator in the project and give that connection name as a Value..
I am not finding sufficiant Documentation for 'JMS Adapter' so M clueless and right now any help will be appriciated :-)
Regards,
Akshatha.

Configuration Steps for Decentralized Adapter Engine

Hi all,
What all configuration steps are required to make Adapter Engine as
Decentralized AE.
I have made required changes in SLD DataSupplier in Visual Administrator.
what more configurations have to be done? On SAP XI Server and Decentralized
Adapter Engine.
With regards
Prasad

Prasad,
After configuring SLD data supplier in Visual Admin, you need to the following
1) Configure the gateway service for the central integration server on adapter engine host.
2) Perform Initial adapter engine cache refresh
3) Trigger data transfer to SLD
4) Check the connection parameters in exchangeProfile
5) Create HTTP destination pmistore in java environment
you have to go through all these tests for decentralized adapter engine. If you have XI configuration guide, it has all these steps in detail for you to configure
--Archana

Configuring Process Integration Scenarios for Advanced Adapter Engine

Hello @all,
i've an asynchronous SOAP scenario and would like to configure an integrated configuration for Advanced Adapter Engine using a process integration scenario. In the documentation (Link below) it is described, that you can select local communication using AAE in the model configurator, but I couldn't find any hint. Any idea?
Documentation:
http://help.sap.com/saphelp_nw73/helpdata/en/48/ce987b18d3424be10000000a421937/content.htm
Thanks and kind regards
Andreas

Hi,
Use thse links:
Advanced Adapter Engine Configuration in PI 7.1
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/700058f0-b1a1-2a10-39a8-ab2627b87cfa?QuickLink=index&overridelayout=true&47047071760975
Sreeni.

Configuring Application Explorer for PeopleSoft Adapter

Similar Messages

Maybe you are looking for