Configuring mail message templates by Category

Hi all,
I am interested to know whether it is possible to set up different mail messages according to different business document attributes? In our case we would like to change the Contract Renewal Reminder message depending on the Category that the Master Agreement is assigned to.
Many thanks,
Claire
Claire Lenihan
Procurement Systems Manager, KPMG LLP

Hi Claire,
Within a Mail Configuration, for each Mail Type, there can only be one Mail Template tied to it. I'm afraid you have to use the same Mail Template for all the categories. System allows use of limited number of macros in the mail body, but I don't believe even those will help here.
Regards,
Vikram

Similar Messages

  • Assigning new token to mail message template

    Hi all
    We are trying to put <%Vendor_Company Name%>  token in RFx Invite template duplicate. However it is giving an error "Token not valid". Can there is a way by which this could be achieved?
    Regards
    Mudit Saini

    Hi Tripti,
    The only available tokens in the RFx Invite mail template are:
    CURRENT_DUE_DATE The due date of the DA Document
    DOCUMENT_HEADER_URL The reference to the vendors RFx Document
    RFX_INTEND_TO_RESPOND_DATE The date the vendor must respond to this RFx by.
    RFX_DUE_DATE The date the vendor must complete his RFx proposal by.
    Apart from this there are global tokens available for all mail message templates.
    These can be found in the RG - Mail Template Reference.
    New/Custom tokens cannot be added.
    Hope this helps.
    Regards,
    Subhasini

  • The e-mail message could not be sent. Make sure the outgoing e-mail settings for the server are configured correctly

    I have a 2 server SharePoint farm.
    All outgoing emails were working fine.
    I just restarted both servers and now after that none of the emails are being sent. I am using OOB publishing workflow and it shows message:
    The e-mail message could not be sent. Make sure the outgoing e-mail settings for the server are configured correctly.
    Even if I setup Alert on some list, it doesn't send email.
    I have checked that outgoing email setting in CA is defined and like I said it was working fine without problems but after restart it is showing error.
    What could be the cause of this and how to fix it?
    EDIT
    I removed outgoing mail server in CA, added again and restart IIS but still emails from OOB workflow is not being sent. But email from Alerts are being sent. Don't know what to do now.

    This is really weird, It works when an alert is set but workflows doesn't send emails... Can you create a simple 1 Step workflow in SPD to send an email when a specific field is set. See if this sends an email..
    AJ MCTS: SP 2010 Configuration MCSA: Windows 7 If you find this post useful kindly please mark it as an answer :) TY
    I created a test workflow which sends email to user and it is also not sending email. But I am getting email from SharePoint regarding "variation" page changes as well as alerts which I told above.

  • The user or users have been added successfully, but there was an error in sending the e-mail message. The server may not be set up correctly to send e-mail. To verify that e-mail is configured correctly, contact your server administrator

    I got this problem when I tried to configure out-going email and add an account to farm administrator group.
    I configure out-going email according to this website http://technet.microsoft.com/en-us/library/cc288949.aspx
    Here are the screen shots.
    The SMTP server and email accounts work out OK when I use Outlook 2010 to test.
    Anyone can help me about it? Thanks.
    Here is the log.
    09/20/2012 09:21:00.36 w3wp.exe (0x1F7C)                      
    0x1138
    SharePoint Foundation         E-Mail                        
    8gsf
    High    
    #160008: The e-mail address 'admin3.sharepoint@domain' contains illegal
    characters. df98555c-612f-4a58-9443-ab6e9a4fcc53
    09/20/2012 09:21:00.36 w3wp.exe (0x1F7C)                      
    0x1138
    SharePoint Foundation         General                      
    8kh7 High    
    Cannot complete this action.  Please try again.
    df98555c-612f-4a58-9443-ab6e9a4fcc53
    09/20/2012 09:21:00.36 w3wp.exe (0x1F7C)                      
    0x1138
    SharePoint Foundation         E-Mail                        
    7946 Critical
    Cannot complete this action.  Please try again.
    df98555c-612f-4a58-9443-ab6e9a4fcc53
    09/20/2012 09:21:00.36 w3wp.exe (0x1F7C)                      
    0x1138
    SharePoint Foundation         Runtime                      
    tkau Unexpected
    Microsoft.SharePoint.SPException: The user or users have been added successfully, but there was an error in sending the e-mail message. The server may not be set up correctly to send e-mail. To verify that e-mail is configured correctly, contact your
    server administrator.    at Microsoft.SharePoint.ApplicationPages.AclInv.SendEmailInvitation(EntityEditor picker, String subject, String message)     at Microsoft.SharePoint.ApplicationPages.AclInv.BtnOK_Click(Object sender, EventArgs e)
        at System.Web.UI.WebControls.Button.OnClick(EventArgs e)     at System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument)     at System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String
    eventArgument)     at System.Web.UI.Page.ProcessRequestMain(Boolean includeStage...
    df98555c-612f-4a58-9443-ab6e9a4fcc53
    The e-mail address I have tested it for several times and there is no problem.
    Anyone has any clue about this error?

    Hi.
    This I have seen before...
    It can be that the SMTP relay server is configured to only allow certain IP ranges or addresses.
    It can be that the firewall on the SP server does not allow for SMTP traffic (normally 25, for example for Exchange).
    It can be that there is an Antivirus on the SP server(Client AV) that prohobits the Timer service to send email from this server. I have seen MacAfee do this. Needed an policy change.
    If, its the builtin SMTP service you are using, check this link:
    http://blog.sharepointrx.com/2010/11/18/setting-up-the-iis-smtp-server-for-sending-email-from-sharepoint-2010-on-server-2008-r2/
    Check that and try again.
    Regards
    Thomas Balkeståhl - Technical Specialist - SharePoint -
    http://blog.blksthl.com
    Download the SharePoint Branding Project here
    Download the SharePoint 2010 Site Settings Explained here

  • The e-mail message cannot be sent. Make sure the outgoing e-mail settings for the server are configured correctly.

    Hi,
    I have SP 2013, and it was working properly. and workflows send emails perfectly. yesterday, i decided to build a fresh site collection so i deleted the old one and created a new one. now, workflows are unable to send emails. i'm sure it has nothing to do
    with my mail server cuz no changes happened to it. i'm sure about the settings for outgoing mail on central admin. all i did, was to enter mail server IP in outgoing mail field and email below it.
    in the workflow status the status says "error" followed by this message: "The e-mail message cannot be sent. Make sure the outgoing e-mail settings for the server are configured correctly."
    Any help please?

    Hi,
    According to your post, my understanding is that you failed to send email after building a fresh site collection.
    I recommend to verify that you have entered your SMTP server name correctly.
    You can add it as FQDN e.g. ServerName.DomainName.
    Here are a similar articles for your reference:
    http://social.technet.microsoft.com/Forums/sharepoint/en-US/f0605f59-0baa-49c9-854e-0fb369a9e5a0/cant-seem-to-get-emails-to-send-in-sharepoint
    http://alpesh.nakars.com/blog/sharepoint-outgoing-email-issue/
    Best Regards,
    Linda
    Linda Li
    TechNet Community Support

  • Configure Mail to have only the 50 last messages.

    Is it possible to configure Mail to have only the 50 last messages, as it is on iPhone?
    Thanks.

    Ok, thanks for the tip.
    But It is not exactly what I want to do. Maybe it is not possible.
    In th iPhone mail app, you can configure your imap acount to be synchronised with your mail sever loading only the 50th last messages, in order to save spaces in your iPhone. I am looking for this opotion on my macbook, for the same reason.

  • Configured Mail in 10.4.11 to iCloud specifications and get error messages

    Configured Mail in 10.4.11 to iCloud specifications and get error messages and still cannot send and receive. Get error messages, "does not recognize password" etc. Have working on Snow Leopard, iPhone iPad but not 10.4.11 PPC Mail. Any help? I used Apple support set up. I originally had a .mac account and have tried both [email protected] and xxx.me.com as username. I Upgraded my password to stronger suggested strength. (one cap and one letter minimum 8) I verified Keychain. I have even deleted everything including Keychain and account and started over numerous times, still no joy.  Ports are incoming 993 and outgoing 587.  Will not be upgrading this machine due to production software issues but was told I could stll use the .mac email
    Any help here?
    -Thanks

    Give the date there is another probable solution. Were you originally a MobileMe subscriber? If you weren't, then please ignore the rest of this post.
    MobileMe subscribers who migrated to iCloud received complimentary extra storage up until September 30 2013. This has now expired. If you have less than 5GB data in iCloud then your storage simply reverts to 5GB.
    However if you have more than 5GB data, Backup, Documents and Mail will stop working until you either delete sufficient data to bring you within 5GB or purchase additional storage. Possibly this is what has happened to your - you should have been sent an email about this.
    For instructions on purchasing additional storage please see
    http://support.apple.com/kb/HT4874
    For help in reducing your iCloud data please see
    http://support.apple.com/kb/HT4847
    Your problem is that you cannot access iCloud to do this because you have no iCloud preference pane. Your only options are to use a compliant Mac (Lion or Mountain Lion) or an iOS5/6 device to purchase extra storage; or to go to http://icloud.com and delete as much as you can there (you may not be able to access this page on Tiger, but you would be able to do so from any more recent computer).

  • How to fix "The e-mail message cannot be sent. Make sure the outgoing e-mail settings for the server are configured correctly."

    Hi All,
    I have move dev to production, then workflow facing "The e-mail message cannot be sent. Make sure the outgoing e-mail settings for the server are configured correctly". Actually it is working fine in dev, in production mail not going. How to fix
    this issue?
    Thanks  in advance! 

    make sure your outgoing email settings are correct and also make sure servers are in exchange rely if you are using exchange.http://sharepoint.stackexchange.com/questions/35353/how-to-handle-e-mail-message-cannot-be-sent-error
    check below blogs: http://www.chrisbuchanan.ca/Blog/Lists/Posts/Post.aspx?ID=2
    another option to put pause in right place:
    http://social.msdn.microsoft.com/Forums/sharepoint/en-US/6e848a25-019d-4220-aff6-c535da933e0f/the-error-message-in-workflow-history-the-email-message-cannot-be-sent
    Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

  • SBO mailer message body configuration

    Hi all,
    I would like to know if we can configure the message body of an email, see belowé
    1.      Date      Customer      Remarks                                                     Due Date
    111100029     07/25/2011     Amber Mann     Based On Sales Orders 111000042.     07/25/2011
    The customer would like to delete the Remarks,
    any idea ?
    thanks
    Charles

    Hi Charles,
    This remark is linking to the table column directly. Unless you can taken out the column from the email source, nothing you can do about it.
    Thanks,
    Gordon

  • Fault e-mail message

    Hi,
    I have asynchronous scenario :
    e-mail -> XI 3.0 - IDOC (R/3)
    When received e-mail is not processed corectly I have to send an error e-mail message back to to supplier.
    What is a simplest method to achieve this ?
    Is it sufficient to use Fault Message Type (what else ?).
    Thanks
    Marian

    Dear Marian Morzol,
              Here are my clarification
    1)
    In Aravindh weblogs there is a example when execution time exceed some treshold value. However I need to raise alert when an error occurs in message processing. Do I understand it correctly when I suppose that category MONITORING and parameter CCMS_MONITORING with value 1 will rease an alert when the above error occurs ?
    I suppose it based on documentation : "If you have monitoring switched on, any system and application errors that occur when processing an XML message within the Integration Engine are saved in the CCMS."
    category MONITORING and parameter CCMS_MONITORING with value 1 will switch on  CCMS and will not raise alert with the message fails.But for raising alerts during the configuring CCMS it is mandatory to switch on CCMS.
    Once you  configured CCMS , the inbuilt property of the CCMS will raise  alert when a message fails or when the time for execution exceeds beyond a limit depending upon our configuration(as mentioned in my second and third blogs on CCMS).
          1.Switch on CCMS (parameter CCMS_MONITORING with value 1)
          2.Add the system (SID) and its client that needs to be monitored.
          3.Go to RZ 20 .from the monitoring template availablr for Exchange Infrastructure , create a monitoring set for monitoring that system.
        Once this is done CCMS is responsible for raising alerts when a message fails.We can then handle the alert raised with suitable auto reaction methods which in turn calls function modules or RFCs.
    2)
    In Aravindh series there is a fixed e-mail address ... I need to read supplier number from MessagePayload/ or original sender e-mail address and send message to this e-mail address. Based on Michal weblog I am able to write a supplier number to alert message. But how I can reach this text from any further (ABAP) program (method) ?
    The recipients who should be informed about the failure of the message will be maintained in the auto reaction methods as well as the SAPCONNECT configuration.
       There is nothing much u can do to dynamically choose the recipients. Becoz triggering E-Mail in CCMS is a configuration setting done once.There is no place to do business logic involved anywhere in the configuration as far as i know.
        In simple terms , the entire process is just like  connecting pipes of different shapes and size .You cant do anything when water is flowing inside. its all set.
    "I need to send an e-mail to recipent e-mail read from XML which will be delivered  to XI e-mail adapter in e-mail as an attachment.
    Do you think it is possible to implement ?"
    I think it is possible. Are you aware of the payloadswapbean---> itz a module provided by SAP , it will bring in the attachment as the payload and helps you to extract  information from the attachment.
        It is available in detail in How To…Use the Mail
    Adapter of the XI 3.0 J2EE Adapter Engine(Page no: 8,9,10).
    Have a look and i feel it helps you.
    really sorry for the late reply.
    regards,
    aravindh.

  • Sender Mail Adapter Error: exception caught during processing mail message;

    HI , I am configuring mail to file scenario. Need to read mail content (no need to capture From,TO or Subject details) and create a file with the content in the mail.
    Need to read mails from microsoft outlook. Exchange server has been configured for POP3 protocol.
    Following are the details provoding in sender mail adapter:
    URL: provided url in the format: pop://<server name>
    Authentication method: plain
    provided user credinetions to access mails.
    poll interval - 1min
    content encoding none.
    processing parameters : quality of service-exactly once
    Since there is no need to capture From,TO or Subject details, didn't select the option - use mail package.
    Verified for unread mails in the mail box and made sure that there are few unread mails.
    Also, created data types and other components in IR and completed mapping.
    But after starting sender mail communication channel, getting error "exception caught during processing mail message; java.lang.NullPointerException" in RWB-adapter-communication channel monitoring.
    please let me know what needs to be done to resolve this error.
    Thanks.

    HI Stefan, i tried, but still it is giving same error. Yes, i am able to access outlook mail with the user credentials given in the communication channel to access exchange server.
    I am using message protocol: xipayload . Also since i dont have to capture TO,from,subject details., created data type just with one element of type string, not in the standard format .Does this makes any difference.

  • When sending e-mail messages to a mail-enabled public folder that have been replicated from old Exchange Server 2000/2003/2007, Exchange Server 2010 environment mails are rejected with NDR.

    Hi, I would like to share with you issue that I’ve solved regarding mail-enabled PF that migrated from Exchange 2000/2003/2007 to 2010, I’ve searched & contacted my MVP leader – there’s no official KB regarding this issue right
    now, so I’m posting here in order to share this among others.
    Note: There’s article(s) that talked about PF replication from Exch2000/2003/2007 to 2010 – this is the same issue as well.
    Symptoms
    E-mail messages that been sent to mail-enabled public folder in Exchange Server 2010 environment rejected with the following NDR:
    “#< #5.2.0 smtp;554 5.2.0 STOREDRV.Deliver.Exception:ObjectNotFoundException; Failed to process message due to a permanent exception with message The Active Directory user wasn’t found. ObjectNotFoundException: The Active Directory
    user wasn’t found.> #SMTP#”
    Sometimes Exchange Server 2010 is documented as well Event ID 1020 on the Event Viewer with this information:
    “Log Name: Application
    Source: MSExchange Store Driver
    Event ID: 1020
    Level: Error
    Description:
    The store driver couldn’t deliver the public folder replication message "Hierarchy ([email protected])" because the following error occurred: The Active Directory user wasn't found.”
    Cause
    In an environment where Microsoft Exchange Server 2000 or Microsoft Exchange Server 2003 previously existed, and all those servers have been removed, there is a chance that an Administrative Group (First Administrative Group or another custom Administrative
    Group) remains with a Servers container, but no servers inside it.
    During replication, when the Exchange 2010 Store Driver sees the empty Servers container in Active Directory, it's expecting a System Attendant object inside the container and when it is not found the error occurs.
    Resolution
    To work around the issue, delete the empty Servers container. This can't be done through Exchange System Manager. Use the ADSI Edit tool to remove it using the following steps:
    Warning If you use the ADSI Edit snap-in, the LDP utility, or any other LDAP version 3 client, and you incorrectly modify the attributes of Active Directory objects, you can cause serious problems. These problems may require you to reinstall Microsoft Windows
    2003 Server, Microsoft Windows Server 2008, Microsoft Exchange 2010 Server or both Windows and Exchange. Microsoft cannot guarantee that problems that occur if you incorrectly modify Active Directory object attributes can be solved. Modify these attributes
    at your own risk.
    1.      
    Start the ADSI Edit MMC Snap-in. Click Start, then
    Run, and type adsiedit.msc, and then click OK.
    2.      
    Connect & Expand the Configuration Container [YourServer.DNSDomainName.com], and then expand
    CN=Configuration,DC=DNSDomainName,DC=com.
    3.      
    Expand CN=Services, and then CN=Microsoft Exchange, and then expand
    CN=YourOrganizationName.
    4.      
    You will see an empty Administrative Group. Expand the
    CN=YourAdministrativeGroupName.
    5.      
    Expand CN=Servers.
    6.      
    Verify there are no server objects listed under the
    CN=Servers container.
    7.      
    Right click on the empty CN=Servers container and choose
    Delete.
    8.      
    Verify the modification, and try to send again the E-mail to the mail-enabled public folder.
    Applies to
    Exchange Server 2010, Standard Edition
    Exchange Server 2010, Enterprise Edition
    Netanel Ben-Shushan, MCSA/E, MCTS, MCITP, Windows Expert-IT Pro MVP. IT Consultant & Trainer | Website (Hebrew): http://www.ben-shushan.net | IT Services: http://www.ben-shushan.net/services | Weblog (Hebrew): http://blogs.microsoft.co.il/blogs/netanelb
    | E-mail: [email protected]

    Sounds like you are looking in the wrong Administrative Group container which is why you are seeing your Exchange 2010 servers in there.
    When you install Exchange 2003 only you will see a container named by default as "CN=First Administrative Group" container. But this could be named anything if you changed the Organization Name on the installation when you installed the first
    Exchange 2003 server into the domain/forest. 
    You will notice that when you install Exchange 2010 part of the AD setup is to create a new configuration container and is named by default "CN=First Administrative Group (FYDIBOHF23SPDLT)".
    So it sounds like you are not looking in the right location within ADSIEdit. 
    You may find the following article also helpful for this issue which is the same resolution:
    http://blogs.technet.com/b/sbs/archive/2012/05/17/empty-cn-servers-container-causing-issues-with-public-folders-on-small-business-server-2011.aspx
    I recommend though that you ensure your Exchange 2003 servers are fully uninstalled or no longer present in your environment before you go deleting the Servers container though.. The following Microsoft article will help with this:
    http://technet.microsoft.com/en-gb/library/gg576862(v=exchg.141).aspx

  • Configuration Mail Store Failed

    Could someone help me ?
    This is my log :
    Using paramFile: D:\OCS_ONEBOX\mtier\oes\config\Disk1\install\win32\oraparam.ini
    Checking requirements...
    Checking operating system version: must be 4.0, 5.0, 5.1 or 5.2.
    Actual 5.0 Passed
    Checking monitor: must be configured to display at least 256 colors.
    Actual 4294967296 Passed
    Checking if CPU speed is above 300 MHz.
    Actual 2405MHz Passed
    All requirements met.
    Environment Variables:
         ORACLE_HOME =
         PATH = C:\Program Files\Oracle\jre\1.1.8\bin;C:\WINNT\system32;C:\WINNT;C:\WINNT\System32\Wbem;Z:.;Y:.;
         CLASSPATH = D:\OCS_ONEBOX\mtier\jlib\ldapjclnt9.jar;D:\OCS_ONEBOX\mtier\jlib\repository.jar;D:\OCS_ONEBOX\mtier\jlib\esinstall.jar;D:\OCS_ONEBOX\mtier\jlib\esldap.jar;D:\OCS_ONEBOX\mtier\jlib\providerutil.jar;D:\OCS_ONEBOX\mtier\jlib\ldap.jar;D:\OCS_ONEBOX\mtier\jlib\jndi.jar;
    Username:Administrator
    This installation is being performed using response file D:/OCS_ONEBOX/mtier/oes/config/Disk1/stage/Response/oracle.um.UM_Config.Typical1.rsp.
    Oracle Universal Installer version is 2.3.0.8.0
    This installation is being performed using response file D:/OCS_ONEBOX/mtier/oes/config/Disk1/stage/Response/oracle.um.UM_Config.Typical1.rsp.
    Setting variable 'FROM_LOCATION' to 'D:\OCS_ONEBOX\mtier\oes\config\Disk1\stage\products.jar'. Received the value from response file.
    Setting variable 'ORACLE_HOME' to 'D:\OCS_ONEBOX\mtier'. Received the value from response file.
    Setting variable 'TOPLEVEL_COMPONENT' to 'oracle.um.UM_Config,9.0.4.1.0,'. Received the value from response file.
    Setting variable 'SHOW_SPLASH_SCREEN' to 'false'. Received the value from response file.
    Setting variable 'SHOW_WELCOME_PAGE' to 'false'. Received the value from response file.
    Setting variable 'SHOW_CUSTOM_TREE_PAGE' to 'false'. Received the value from response file.
    Setting variable 'SHOW_COMPONENT_LOCATIONS_PAGE' to 'false'. Received the value from response file.
    Setting variable 'SHOW_SUMMARY_PAGE' to 'false'. Received the value from response file.
    Setting variable 'SHOW_INSTALL_PROGRESS_PAGE' to 'false'. Received the value from response file.
    Setting variable 'SHOW_REQUIRED_CONFIG_TOOL_PAGE' to 'true'. Received the value from response file.
    Setting variable 'SHOW_CONFIG_TOOL_PAGE' to 'true'. Received the value from response file.
    Setting variable 'SHOW_RELEASE_NOTES' to 'true'. Received the value from response file.
    Setting variable 'SHOW_ROOTSH_CONFIRMATION' to 'true'. Received the value from response file.
    Setting variable 'SHOW_END_SESSION_PAGE' to 'true'. Received the value from response file.
    Setting variable 'SHOW_EXIT_CONFIRMATION' to 'true'. Received the value from response file.
    Setting variable 'NEXT_SESSION' to 'true'. Received the value from response file.
    Setting variable 'NEXT_SESSION_ON_FAIL' to 'true'. Received the value from response file.
    Setting variable 'NEXT_SESSION_RESPONSE' to 'D:\OCS_ONEBOX\mtier\oes\config\Disk1\stage\Response\oracle.um.UM_Config.Typical1.rsp'. Received the value from response file.
    Setting variable 'DEINSTALL_LIST' to 'oracle.um.UM_Config,9.0.4.1.0,'. Received the value from response file.
    Setting variable 'SHOW_DEINSTALL_CONFIRMATION' to 'true'. Received the value from response file.
    Setting variable 'SHOW_DEINSTALL_PROGRESS' to 'true'. Received the value from response file.
    Setting variable 'ACCEPT_LICENSE_AGREEMENT' to 'true'. Received the value from response file.
    *** Welcome Page***
    Initializing install inventory
    Setting up install inventory
    *** Specify File Locations Page***
    Setting the 'SourceLocation ( FROM_LOCATION )' property to 'D:\OCS_ONEBOX\mtier\oes\config\Disk1\stage\products.jar'. Received the value from response file.
    Setting the 'OracleHome ( ORACLE_HOME )' property to 'D:\OCS_ONEBOX\mtier'. Received the value from response file.
    Setting the 'OracleHomeName ( ORACLE_HOME_NAME )' property to 'OCSHome_mid'. Received the value from the default settings.
    Initializing OUI access setup
    Setting variable 'ORACLE_HOME' to 'D:\OCS_ONEBOX\mtier'. Received the value from response file.
    Performing operation for OUI access setup
    Setting variable 'CLUSTER_NODES' to ''. Received the value from a code block.
    *** Select a Product to Install Page***
    Setting the 'TopLevelComp ( ToplevelComp )' property to 'oracle.um.UM_Config, 9.0.4.1.0, >0.0.0.0.0, [ 912 ][OH:2]'. Received the value from the default settings.
    *** Select Installation Type Page***
    Setting the 'InstallType ( DEP_MODE )' property to 'Typical'. Received the value from the default settings.
    Setting the 'TopLevelInstallType ( TLDepModes )' property to 'Typical,'. Received the value from the default settings.
    The selected install type is "typical".
    Install type for "UM configurator 9.0.4.1.0 " is "typical".
    *** Language Selection Page***
    *** Specify Local Host Name Page***
    Setting the 'HostName ( OUI_HOSTNAME )' property to 'oramail.exp.com'. S_LOG_VAR_VALTYPE_CLONE
    *** Component Locations Page***
    *** Entering Component: oracle.um.UM_Config installation
    Setting variable 'system_passwd' to '*Protected value, not to be logged*'. Received the value from response file.
    Setting variable 'sys_passwd' to '*Protected value, not to be logged*'. Received the value from the variable calculation.
    Setting variable 'summary_str' to 'summary'. Received the value from the variable calculation.
    Setting variable 'start_proc_flag' to 'true'. Received the value from the variable calculation.
    Setting variable 'start_proc' to '1'. Received the value from the variable calculation.
    Setting variable 'port_number' to '389'. Received the value from the variable calculation.
    Setting variable 'out_str4' to '*Protected value, not to be logged*'. Received the value from the variable calculation.
    Setting variable 'out_str31' to '*Protected value, not to be logged*'. Received the value from the variable calculation.
    Setting variable 'out_str3' to '*Protected value, not to be logged*'. Received the value from the variable calculation.
    Setting variable 'oid_flag' to '1'. Received the value from the variable calculation.
    Setting variable 'link_htdocs' to 'cal90jsp'. Received the value from the variable calculation.
    Setting variable 'isportinuse_flag' to 'true'. Received the value from the variable calculation.
    Setting variable 'install_cal' to 'false'. Received the value from the variable calculation.
    Setting variable 'host_name' to 'host_name'. Received the value from the variable calculation.
    Setting variable 'global_db_name_list' to ''. Received the value from the variable calculation.
    Setting variable 'global_db_name' to '<SID>.<Domain Name>'. Received the value from the variable calculation.
    Setting variable 'empty_input_string' to '*Protected value, not to be logged*'. Received the value from the variable calculation.
    Setting variable 'domain_name' to 'oracle.com'. Received the value from the variable calculation.
    Setting variable 'ctxsys_passwd' to '*Protected value, not to be logged*'. Received the value from the variable calculation.
    Setting variable 'create_domain_flag' to 'false'. Received the value from the variable calculation.
    Setting variable 'cookie_domain' to '.oracle.com'. Received the value from the variable calculation.
    Setting variable 'connect_str' to 'connect_str'. Received the value from the variable calculation.
    Setting variable 'config_type' to '0'. Received the value from the variable calculation.
    Setting variable 'config4' to 'false'. Received the value from the variable calculation.
    Setting variable 'config3' to 'false'. Received the value from the variable calculation.
    Setting variable 'config2' to 'false'. Received the value from the variable calculation.
    Setting variable 'config1' to 'false'. Received the value from the variable calculation.
    Setting variable 'cal_umadmin_passwd' to '*Protected value, not to be logged*'. Received the value from the variable calculation.
    Setting variable 'cal_dad_name' to 'cal_dad_name'. Received the value from the variable calculation.
    Setting variable 'b_configureUM' to 'true'. Received the value from the variable calculation.
    Setting variable 'app_svr_port' to 'app_svr_port'. Received the value from the variable calculation.
    Setting variable 'app_svr_host_name' to 'app_svr_host_name'. Received the value from the variable calculation.
    Calling Query WindowsGeneralQueries2.3.0.6.0 getWindowsSystemDirectory
    Query Returned: C:\WINNT\system32
    Setting variable 'SystemRoot' to 'C:\WINNT\system32'. Received the value from the variable calculation.
    Setting variable 'SID' to 'iasdb'. Received the value from the variable calculation.
    Setting variable 'ORAHOME' to ''. Received the value from the variable calculation.
    Setting variable 'Net9_Connect_String' to 'ora9i'. Received the value from the variable calculation.
    Setting variable 'Index_Tblspace' to 'escalindxtbl'. Received the value from the variable calculation.
    Setting variable 'Img_Prefix' to '/i/'. Received the value from the variable calculation.
    Setting variable 'INSTALLHOME' to ''. Received the value from the variable calculation.
    Setting variable 'INSTALLATION_NAME' to ''. Received the value from the variable calculation.
    Setting variable 'HOSTNAME' to ''. Received the value from the variable calculation.
    Setting variable 'Flow_User_Passwd' to '*Protected value, not to be logged*'. Received the value from the variable calculation.
    Setting variable 'Flow_User' to 'es_cal'. Received the value from the variable calculation.
    Setting variable 'Def_Tblspace' to 'escaldeftbl'. Received the value from the variable calculation.
    Setting variable 'App_User_Passwd' to '*Protected value, not to be logged*'. Received the value from the variable calculation.
    Setting variable 'App_User' to 'es_cal'. Received the value from the variable calculation.
    Setting variable 'umadmin_passwd' to '*Protected value, not to be logged*'. Received the value from the variable calculation.
    Setting variable 'empty_input_string' to '*Protected value, not to be logged*'. Received the value from a code block.
    Setting variable 'out_str22' to '*Protected value, not to be logged*'. Received the value from the variable calculation.
    Setting variable 'empty_input_string' to '*Protected value, not to be logged*'. Received the value from a code block.
    Setting variable 'es_mail_passwd' to '*Protected value, not to be logged*'. Received the value from the variable calculation.
    Setting variable 'empty_input_string' to '*Protected value, not to be logged*'. Received the value from a code block.
    Setting variable 'out_str2' to '*Protected value, not to be logged*'. Received the value from the variable calculation.
    Setting variable 'out_str24' to '*Protected value, not to be logged*'. Received the value from the variable calculation.
    Setting variable 'global_db_name_list' to '<SID>.<Domain Name>,'. Received the value from a code block.
    *** Unified Messaging Configuration Page***
    Setting the 'TitleLabel' property to 'Unified Messaging Configuration'.
    Setting the 'SubTitleLabel' property to ''.
    Setting the 'Prompt' property to 'Select one of the following options :'.
    Setting the 'Choices' property to 'Mail Store Database Configuration -
    Installs the mail store schema into a dedicated tablespace in a previously installed
    Oracle 9i database.,Middle Tier Configuration -
    Configures the Unified Messaging protocol servers on this host: SMTP, IMAP4, POP3
    and House Keeper.,'.
    Setting the 'BottomDescLabel' property to ''.
    Setting the 'Descriptions' property to 'null'.
    Setting the 'SelectedIndex ( config_type )' property to '0'. Received the value from the UI page.
    Setting variable 'INSTALLATION_NAME' to 'UM_SYSTEM'. Received the value from a code block.
    Setting variable 'config1' to 'false'. Received the value from a code block.
    Setting variable 'config2' to 'false'. Received the value from a code block.
    Setting variable 'config3' to 'false'. Received the value from a code block.
    Setting variable 'config4' to 'false'. Received the value from a code block.
    Setting variable 'install_cal' to 'false'. Received the value from a code block.
    Setting variable 'oid_flag' to '0'. Received the value from a code block.
    Setting variable 'system_passwd' to '*Protected value, not to be logged*'. Received the value from a code block.
    *** Mail Store Database Configuration Page***
    Calling Query generalQueries2.3.0.6.0 getOS
    Query Returned: Windows 2000
    Calling Query SpawnQueries1.1.4 Spawn
    command = Protected value, not to be logged
    Query Returned: 0
    Error:*** Alert: System password is invalid, please reenter. ***
    User Selected: Yes/OK
    Calling Query generalQueries2.3.0.6.0 getOS
    Query Returned: Windows 2000
    Calling Query SpawnQueries1.1.4 Spawn
    command = Protected value, not to be logged
    Query Returned: 0
    Error:*** Alert: System password is invalid, please reenter. ***
    User Selected: Yes/OK
    Calling Query generalQueries2.3.0.6.0 getOS
    Query Returned: Windows 2000
    Calling Query SpawnQueries1.1.4 Spawn
    command = Protected value, not to be logged
    Query Returned: 0
    Error:*** Alert: System password is invalid, please reenter. ***
    User Selected: Yes/OK
    Calling Query generalQueries2.3.0.6.0 getOS
    Query Returned: Windows 2000
    Calling Query SpawnQueries1.1.4 Spawn
    command = Protected value, not to be logged
    Query Returned: 0
    Error:*** Alert: System password is invalid, please reenter. ***
    User Selected: Yes/OK
    Calling Query generalQueries2.3.0.6.0 getOS
    Query Returned: Windows 2000
    Calling Query SpawnQueries1.1.4 Spawn
    command = Protected value, not to be logged
    Query Returned: 0
    Error:*** Alert: System password is invalid, please reenter. ***
    User Selected: Yes/OK
    Calling Query generalQueries2.3.0.6.0 getOS
    Query Returned: Windows 2000
    Calling Query SpawnQueries1.1.4 Spawn
    command = Protected value, not to be logged
    Query Returned: 2
    Setting the 'TitleLabel' property to 'Mail Store Database Configuration'.
    Setting the 'SubTitleLabel' property to ''.
    Setting the 'Prompt' property to 'Enter the values for the service name connect string and system password of this mail store database. These values are used by the Universal Installer to install the mail store schema.'.
    Setting the 'Labels' property to 'Database Host Name,SID,Port Number,System Password,'.
    Setting the 'Types' property to 'TEXTFIELD,TEXTFIELD,TEXTFIELD,SECURE,'.
    Setting the 'Choices' property to ''.
    Setting the 'BottomDescLabel' property to 'null'.
    Setting the 'Selections ( out_str2 )' property to '*Protected value, not to be logged*'. Received the value from the UI page.
    Calling Query generalQueries2.3.0.6.0 getOS
    Query Returned: Windows 2000
    Calling Query SpawnQueries1.1.4 Spawn
    command = Protected value, not to be logged
    Query Returned: 2
    *** CTXSYS Password Page***
    Calling Query generalQueries2.3.0.6.0 getOS
    Query Returned: Windows 2000
    Calling Query SpawnQueries1.1.4 Spawn
    command = Protected value, not to be logged
    Query Returned: 0
    Error:*** Alert: Ctxsys password is invalid, please reenter. ***
    User Selected: Yes/OK
    Calling Query generalQueries2.3.0.6.0 getOS
    Query Returned: Windows 2000
    Calling Query SpawnQueries1.1.4 Spawn
    command = Protected value, not to be logged
    Query Returned: 0
    Error:*** Alert: Ctxsys password is invalid, please reenter. ***
    User Selected: Yes/OK
    Calling Query generalQueries2.3.0.6.0 getOS
    Query Returned: Windows 2000
    Calling Query SpawnQueries1.1.4 Spawn
    command = Protected value, not to be logged
    Query Returned: 1
    Setting the 'TitleLabel' property to 'CTXSYS Password'.
    Setting the 'SubTitleLabel' property to ''.
    Setting the 'Prompt' property to 'This is the password for the ctxsys schema.'.
    Setting the 'Labels' property to 'Enter Password:,'.
    Setting the 'Types' property to 'SECURE,'.
    Setting the 'Choices' property to ''.
    Setting the 'BottomDescLabel' property to 'null'.
    Setting the 'Selections ( out_str24 )' property to '*Protected value, not to be logged*'. Received the value from the UI page.
    Setting variable 'ctxsys_passwd' to '*Protected value, not to be logged*'. Received the value from a code block.
    Setting variable 'host_name' to 'ormail'. Received the value from a code block.
    Setting variable 'SID' to 'ocsstore'. Received the value from a code block.
    Setting variable 'port_number' to '1521'. Received the value from a code block.
    Setting variable 'connect_str' to '''. Received the value from a code block.
    Setting variable 'connect_str' to '"(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=ormail)(PORT=1521)))(CONNECT_DATA=(SID=ocsstore)))"'. Received the value from a code block.
    Setting variable 'system_passwd' to '*Protected value, not to be logged*'. Received the value from a code block.
    Setting variable 'ORAHOME' to 'D:\OCS_ONEBOX\mtier'. Received the value from a code block.
    Setting variable 'config2' to 'true'. Received the value from a code block.
    Setting variable 'summary_str' to 'Click 'Next' to install and configure Unified Messaging mail store , click 'Previous' to go back to the previous page .'. Received the value from a code block.
    *** ES_MAIL Password Page***
    Setting variable 'empty_input_string' to '*Protected value, not to be logged*'. Received the value from a code block.
    Setting the 'TitleLabel' property to 'ES_MAIL Password'.
    Setting the 'SubTitleLabel' property to ''.
    Setting the 'Prompt' property to 'This is the password for the e-mail server schema.'.
    Setting the 'PasswordLabel' property to 'Enter Password:'.
    Setting the 'ConfirmLabel' property to 'Confirm Password:'.
    Setting the 'BottomDescLabel' property to 'null'.
    Setting the 'Password ( es_mail_passwd )' property to '*Protected value, not to be logged*'. Received the value from the UI page.
    Calling Query fileQueries2.3.0.6.0 exists
    filename = D:\OCS_ONEBOX\mtier/oes/log/exists.txt
    Query Returned: false
    *** UMADMIN Password Page***
    Setting variable 'empty_input_string' to '*Protected value, not to be logged*'. Received the value from a code block.
    Setting the 'TitleLabel' property to 'UMADMIN Password'.
    Setting the 'SubTitleLabel' property to ''.
    Setting the 'Prompt' property to 'Enter and confirm the password for the UMADMIN user in the Internet Directory.'.
    Setting the 'PasswordLabel' property to 'Enter Password:'.
    Setting the 'ConfirmLabel' property to 'Confirm Password:'.
    Setting the 'BottomDescLabel' property to 'null'.
    Setting the 'Password ( umadmin_passwd )' property to '*Protected value, not to be logged*'. Received the value from the UI page.
    Setting variable 'oid_flag' to '1'. Received the value from a code block.
    *** Unified Messaging Domain Page***
    Setting the 'TitleLabel' property to 'Unified Messaging Domain'.
    Setting the 'SubTitleLabel' property to ''.
    Setting the 'Prompt' property to 'Enter the name of the new Unified Messaging Domain to be created.'.
    Setting the 'TextLabel' property to 'Domain Name'.
    Setting the 'BottomDescLabel' property to 'null'.
    Setting the 'TextField ( domain_name )' property to 'oramail.exp.com'. Received the value from the UI page.
    *** Summary Page***
    Setting the 'TitleLabel' property to 'Summary'.
    Setting the 'SubTitleLabel' property to ''.
    Setting the 'InfoLabel' property to 'Click 'Next' to install and configure Unified Messaging mail store , click 'Previous' to go back to the previous page .'.
    Setting variable 'create_domain_flag' to 'true'. Received the value from a code block.
    *** Summary Page***
    Summary
    Global Settings
    Source: D:\OCS_ONEBOX\mtier\oes\config\Disk1\stage\products.jar
    Oracle Home: D:\OCS_ONEBOX\mtier (OCSHome_mid)
    Installation Type: typical
    Product Languages
    English
    Space Requirements
    C:\ Required 261KB (includes 258KB temporary) : Available 1.94GB
    D:\ Required 536KB : Available 15.16GB
    New Installations (1 products)
    UM configurator 9.0.4.1.0
    Starting install Install Phase 1 of component UM configurator
    Starting install Install Phase 2 of component UM configurator
    Initializing OUI save inventory
    Unable to read C:\Program Files\Oracle\Inventory/Contents/LibsList.ser. Some inventory information may be lost.
    Current Inventory:
         Independent Products:
              Oracle Windows System Files Fullmode 9.0.2.0.1 Development
              Oracle Windows System Files Installation 9.0.2.0.1 Development
              Java Runtime Environment 1.1.8.16.0a
              Oracle Windows System Files Verification 9.0.2.0.0 Development
         Oracle Home: OUIHome
              This Oracle Home has not been changed in this session.
         Oracle Home: OCSHome
              This Oracle Home has not been changed in this session.
         Oracle Home: OCSHome_stg
              This Oracle Home has not been changed in this session.
         Oracle Home: OCSHome_inf
              This Oracle Home has not been changed in this session.
         Oracle Home: OCSHome_mid
              Oracle Collaboration Suite 9.0.4.1.1
              Sun JDK extensions 9.0.2.0.0
              Sun JDK extensions Patch 9.0.2.3.0
              Sun JDK 1.3.1.0.2a
              Java Runtime Environment 1.4.1.3.0a
              Java Runtime Environment 1.3.1.6.0a
              Installer SDK Component 2.3.0.8.0
              Oracle Universal Installer 2.3.0.8.0
              RDBMS Required Support Files 9.0.1.4.0
              Enterprise Manager Minimal Support Files 9.0.2.0.1
              Collaboration Suite Wireless Server Management 9.0.3.2.0
              Perl Interpreter 5.6.1.0.0a
              Advanced Queueing (AQ) API 9.0.1.4.0
              XML Parser for Java 9.0.2.0.0
              Oracle Dynamic Monitoring Service 9.0.2.0.1
              Oracle Dynamic Monitoring Service Patch 9.0.2.3.0
              regexp 2.0.21.0.0
              Bali Share 1.1.17.0.0
              Oracle9i Application Server Object in OID 9.0.2.0.0
              Oracle9iAS Application Server WebCache Core to non-Core Upgrade 9.0.2.0.0
              Oracle JDBC Development Drivers 9.0.1.4.0
              JDBC Common Files 9.0.1.4.0
              JDBC/OCI Common Files 9.0.1.4.0
              Oracle Trace Required Support Files 9.0.1.0.1
              Oracle Client Required Support Files 9.0.1.4.0
              Agent Required Support Files 9.0.2.0.0a
              SSL Required Support Files 9.0.1.4.0
              LDAP Required Support Files 9.0.2.1.0
              LDAP Required Support Files Patch 9.0.2.3.0
              Parser Generator Required Support Files 9.0.1.0.0
              PL/SQL Required Support Files 9.0.1.4.0
              Oracle9iAS Application Server Core to non-Core Upgrade 9.0.2.0.0
              Repository Config Assistant 9.0.2.0.0
              XML Class Generator for Java 9.0.2.0.0
              Oracle JDBC Thin Driver for JDK 1.1 9.0.1.4.0
              Oracle Extended Windowing Toolkit 3.4.12.0.0
              Oracle Ice Browser 5.06.8.0.0
              Oracle Collaboration Suite Quick Tutorial 9.0.4.1.1
              Java Authorization 9.0.2.0.1
              Java Authorization Patch 9.0.2.3.0
              Enterprise Login Assistant 9.0.2.0.1
              Oracle JFC Extended Windowing Toolkit 4.2.6.0.0
              Oracle 9iAS Single Sign On Registration 9.0.2.0.1
              Oracle Ultra Search Common Files 9.0.3.4.0
              Oracle JDBC Thin Driver for JDK 1.2 9.0.1.4.0
              XML Parser for PL/SQL 9.0.2.0.0
              Platform Required Support Files 9.0.1.4.0
              Oracle Core Required Support Files 9.0.1.4.0
              Oracle Help For Java 3.2.12.0.0
              Extended Windowing Toolkit 3.3.18.0.0
              Oracle interMedia Java Advanced Imaging 9.0.2.0.0
              Oracle Help For Java 4.1.12.0.0
              Oracle interMedia Java Media Framework Client 9.0.2.0.0
              Oracle9i Globalization Support 9.0.1.4.0
              Oracle interMedia Java Client 9.0.2.0.0
              Oracle XML SQL Utility 9.0.1.4.0
              Oracle Net Required Support Files 9.0.1.4.0
              Precompiler Required Support Files 9.0.1.4.0
              XML Class Generator for C++ 9.0.2.0.0
              Oracle Code Editor 1.2.1.0.0A
              XDK Required Support Files 9.0.2.0.0
              XML Parser for C 9.0.2.0.0
              Java Naming and Directory Interface Libraries 1.2.1.0.0
              Oracle Dynamic Services Core 9.0.2.0.1
              Oracle Internet Directory Tools 9.0.2.1.0
              Required Support Files 9.0.1.4.0
              UM common 9.0.4.1.0
              Utilities Common Files 9.0.1.4.0
              Oracle JDBC/OCI Driver for JDK 1.2 9.0.1.4.0
              Oracle Internet Directory Client Common Files 9.0.2.1.0
              Oracle Database User Interface 2.2.11.0.0
              Oracle Ultra Search Middle-Tier 9.0.3.4.0
              Assistant Common Files 9.0.2.0.1
              XML Parser for C++ 9.0.2.0.0
              Oracle Intelligent Agent Base Component Files 9.0.2.0.0a
              Oracle Intelligent Agent 9.0.2.0.0a
              Oracle Property Inspector 4.1.8.0.0
              Oracle EMD Agent Extensions 9.0.2.0.0a
              Oracle Forms Extensions 9.0.2.0.0a
              Database SQL Scripts 9.0.1.4.0
              Oracle Applications Extensions 9.0.2.0.0a
              Oracle Collaboration Suite Release Notes 9.0.4.1.1
              Oracle Portal Data 9.0.2.2.22
              Oracle Net Configuration Assistant 9.0.1.4.0
              Enterprise Manager Translated Files 9.0.2.0.1
              Enterprise Manager Base Classes 9.0.2.0.1
              Oracle HTTP Server Extensions 9.0.2.0.0a
              Oracle Net Manager 9.0.1.4.0
              Oracle Java Portal Development Kit 9.0.2.2.22
              Oracle Portal Community Portlets 9.0.2.2.22
              Oracle9iAS Repository API 9.0.2.1.0
              Oracle JDBC/OCI Driver for JDK 1.1 9.0.1.4.0
              Oracle Java Object Cache 9.0.2.0.0
              Oracle Java Object Cache Patch 9.0.2.3.0
              Oracle Process Management Notification 9.0.2.0.0
              Oracle Process Management Notification Patch 9.0.2.3.0
              Visigenics ORB 3.4.0.0.0
              Oracle Enterprise Java Beans and CORBA Tools 9.0.1.1.1
              Oracle Dynamic Services Server 9.0.2.0.1
              Apache Configuration for EJB 9.0.1.0.1
              HTTP Server files 1.3.22.0.1a
              HTTP Server Files Patch 1.3.22.0.1d
              Oracle OC4J Module 9.0.2.0.0
              Oracle OC4J Module Patch 9.0.2.3.0
              Oracle Ultra Search Server 9.0.3.4.0
              Oracle Wallet Manager 9.0.1.4.0
              Oracle Net 9.0.1.4.0
              Oracle Java Tools 9.0.1.4.0
              Secure Socket Layer 9.0.1.4.0
              Oracle9iAS Clickstream Intelligence Common 9.0.2.2.0
              Enterprise Manager Process Utility 9.0.2.0.0
              Oracle9i Syndication Server Core 9.0.2.0.1
              Oracle Distributed Configuration Management 9.0.2.0.0
              Oracle Distributed Configuration Management Patch 9.0.2.3.0
              Enterprise Manager Encapsulated J2EE 9.0.2.0.0
              Bali Resource Translation System 2.0.5.0.0
              Oracle9i Syndication Server 9.0.2.0.1
              Oracle JDBC Drivers 9.0.1.4.0
              Oracle9iAS Mapviewer 9.0.2.0.0
              XSQL Servlet 9.0.2.0.0
              SQLJ Runtime 9.0.2.0.0
              Oracle Java Server Pages 9.0.2.0.1
              Oracle Java Server Pages Patch 9.0.2.3.0
              Oracle9iAS Containers for J2EE 9.0.2.0.1
              Oracle9iAS Containers for J2EE Patch 9.0.2.3.0
              Oracle Display Fonts 9.0.2.0.0
              Oracle UIX 2.0.21.0.0
              Oracle SOAP Client files 2.2.0.0.0b
              Oracle SOAP Client Files Patch 2.2.0.0.0e
              Oracle Help for the Web 1.0.7.0.0
              Oracle Enterprise Manager Web Site 9.0.2.0.0
              Unified Messaging EMD configuration 9.0.4.1.0
              Oracle9iAS Clickstream Intelligence Collector Agent Management 9.0.2.2.0
              BC4J Runtime Sample for Oracle9iAS 9.0.2.799.0
              Oracle Ultra Search Extension for EMD 9.0.3.4.0
              JSDK 2.0.0.0.0d
              Apache JServ 1.1.2.0.0a
              Apache JServ Patch 1.1.2.0.0d
              Discoverer Services Manager 9.0.2.39.02
              Oracle9i Delegated Administration Service 9.0.2.1.0
              Oracle9i Delegated Administration Service Patch 9.0.2.3.0
              Export/Import 9.0.1.4.0
              SQL*Loader 9.0.1.4.0
              Oracle SOAP Server 2.2.0.0.0b
              Oracle SOAP Server Patch 2.2.0.0.0e
              Oracle eBusiness Management Extensions 9.0.2.0.0a
              Apache Module for Oracle Distributed Authoring and Versioning 9.0.2.0.0
              SQL*Plus 9.0.1.4.0
              XML Transviewer Beans 9.0.2.0.0
              Reports OEM Extension 9.0.2.0.3
              Forms EMEXT 9.0.2.9.0
              Apache Configuration for Oracle Java Server Pages 9.0.2.0.0
              BC4J Runtime for Oracle9iAS 9.0.2.799.0
              Oracle9iAS Configuration for OC4J 9.0.2.0.1
              Oracle XML Runtime Components 9.0.2.0.0
              Oracle Mod PL/SQL Gateway 9.0.2.0.0
              Patch of Oracle Mod PL/SQL Gateway 9.0.2.6.0
              Oracle9iAS Web Cache 9.0.2.0.0
              Oracle9iAS Web Cache Patch 9.0.2.3.0
              Oracle Agent Extensions 9.0.2.0.0a
              Oracle Internet Directory Client 9.0.2.1.0
              Oracle Internet Directory Client Patch 9.0.2.3.0
              Apache Configuration for Oracle XML Developer's Kit 9.0.2.0.0
              Oracle Net Listener 9.0.1.4.0
              Oracle Portal Help 9.0.2.2.22
              Oracle Portal Integration with Reports 9.0.2.2.22
              Oracle Portal Configuration Assistant 9.0.2.2.22
              Oracle Portal CAT 9.0.2.2.22
              Oracle Portal Images 9.0.2.2.22
              Oracle Portal NLS 9.0.2.2.22
              Oracle Portal Common Services 9.0.2.2.22
              Oracle Portal Sitebuilder 9.0.2.2.22
              Oracle Portal Demos 9.0.2.2.22
              Oracle Portal Documentation 9.0.2.2.22
              Oracle Portal Java 9.0.2.2.22
              Oracle Portal SSO 9.0.2.2.22
              Oracle Portal Servlets 9.0.2.2.22
              Oracle Portal PLSQLToolkit 9.0.2.2.22
              Oracle Portal Utilities 9.0.2.2.22
              Oracle Portal VPD Policy 9.0.2.2.22
              Oracle9iAS Clickstream Intelligence Collector Agent 9.0.2.2.0
              Oracle9iAS Clickstream Intelligence Core 9.0.2.2.0
              Voicemail Fax Middletier 9.0.4.1.1
              BC4J Config Assistant 9.0.2.799.0
              Email Server Webmail 9.0.4.1.0
              Unified Messaging 9.0.4.1.0
              Oracle HTTP Server 9.0.2.0.0
              Oracle Portal Config Dialogs 9.0.2.2.22
              Oracle9i Application Server Core Products 9.0.2.0.0
              Oracle9i Application Server Middle Tier Products 9.0.2.0.0
              Oracle Portal Monitoring 9.0.2.2.22
              Oracle Portal Database Objects 9.0.2.2.22
              Oracle9i Application Server Instance 9.0.2.0.0
              Oracle Portal 9.0.2.2.22
              Patch of Oracle Portal 9.0.2.3.0B
              Management Tools 9.0.2.0.0
              Oracle Workflow 2.6.2.0.0
              Oracle Collaboration Suite One-offs 9.0.4.1.1
              Collaboration Suite Wireless Server 9.0.3.2.0
              Oracle Calendar application system 9.0.4.1.1
              Oracle Calendar web services 9.0.4.1.1
              Oracle Calendar SDK 9.0.4.1.0
              Oracle Sync Server 9.0.4.1.1
              Oracle Calendar web client 9.0.4.1.1
              Collaboration Suite Wireless 9.0.3.2.0
              Oracle9i Application Server 9.0.2.0.0
              Oracle Collaboration Suite Upgrade Assistant 9.0.4.1.1
              Oracle Files 9.0.4.3.0
              Oracle Calendar server 9.0.4.1.1
              Oracle Calendar administrator 9.0.4.1.1
              Oracle Calendar configuration 9.0.4.1.1
              Oracle Collaboration Suite Web Client 9.0.4.1.1
              Oracle Real-Time Collaboration Core Components 2.0.4.2.0
              UM configurator 9.0.4.1.0
    Starting to execute configuration assistants
    Launched configuration assistant 'Config MailStore'
    Tool type is: Optional.
    The command being spawned is: 'D:\OCS_ONEBOX\mtier/oes/bin/install_mailstore.bat "(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=ormail)(PORT=1521)))(CONNECT_DATA=(SID=ocsstore)))" Protected value, not to be logged ocsstore ormail 1521 UM_SYSTEM D:\OCS_ONEBOX\mtier Protected value, not to be logged Protected value, not to be logged 1 oramail.exp.com'
    Start output from spawned process:
    C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>rem --- running install_mailstore.bat
    "(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=ormail)(PORT=1521)))(CONNECT_DATA=(SID=ocsstore)))" "<sys_passwd>" "<system_passwd>" "<ctxsys_passwd>" 1521 UM_SYSTEM D:\OCS_ONEBOX\mtier ora123 ora123 "<es_mail_passwd>" "<umadmin_passwd>"
    The system cannot find the path specified.
    The system cannot find the path specified.
    == was unexpected at this time.
    End output from spawned process.
    Invalid Exit Code. The following result code will be used for configuration assistants: 1
    Configuration assistant "Config MailStore" failed
    C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>rem --- running install_mailstore.bat
    "(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=ormail)(PORT=1521)))(CONNECT_DATA=(SID=ocsstore)))" "<sys_passwd>" "<system_passwd>" "<ctxsys_passwd>" 1521 UM_SYSTEM D:\OCS_ONEBOX\mtier ora123 ora123 "<es_mail_passwd>" "<umadmin_passwd>"
    The system cannot find the path specified.
    The system cannot find the path specified.
    == was unexpected at this time.
    Result code for launching of configuration assistant is: 1
    The OUICA command is launched from D:\OCS_ONEBOX\mtier\oui\bin\ouica.bat.
    Error:*** Alert: Some of the configuration assistants failed. However these are optional assistants, so they are not required for the correct configuration of your system. If you want to try to run those assistants again, select the failed assistants and click the 'Retry' button. ***
    User Selected: Yes/OK
    Starting to execute configuration assistants
    Launched configuration assistant 'Config MailStore'
    Tool type is: Optional.
    The command being spawned is: 'D:\OCS_ONEBOX\mtier/oes/bin/install_mailstore.bat "(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=ormail)(PORT=1521)))(CONNECT_DATA=(SID=ocsstore)))" Protected value, not to be logged ocsstore ormail 1521 UM_SYSTEM D:\OCS_ONEBOX\mtier Protected value, not to be logged Protected value, not to be logged 1 oramail.exp.com'
    Start output from spawned process:
    C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>rem --- running install_mailstore.bat
    "(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=ormail)(PORT=1521)))(CONNECT_DATA=(SID=ocsstore)))" "<sys_passwd>" "<system_passwd>" "<ctxsys_passwd>" 1521 UM_SYSTEM D:\OCS_ONEBOX\mtier ora123 ora123 "<es_mail_passwd>" "<umadmin_passwd>"
    The system cannot find the path specified.
    The system cannot find the path specified.
    == was unexpected at this time.
    End output from spawned process.
    Invalid Exit Code. The following result code will be used for configuration assistants: 1
    Configuration assistant "Config MailStore" failed
    C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>rem --- running install_mailstore.bat
    "(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=ormail)(PORT=1521)))(CONNECT_DATA=(SID=ocsstore)))" "<sys_passwd>" "<system_passwd>" "<ctxsys_passwd>" 1521 UM_SYSTEM D:\OCS_ONEBOX\mtier ora123 ora123 "<es_mail_passwd>" "<umadmin_passwd>"
    The system cannot find the path specified.
    The system cannot find the path specified.
    == was unexpected at this time.
    Result code for launching of configuration assistant is: 1
    The OUICA command is launched from D:\OCS_ONEBOX\mtier\oui\bin\ouica.bat.
    Starting to execute configuration assistants
    Launched configuration assistant 'Config MailStore'
    Tool type is: Optional.
    The command being spawned is: 'D:\OCS_ONEBOX\mtier/oes/bin/install_mailstore.bat "(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=ormail)(PORT=1521)))(CONNECT_DATA=(SID=ocsstore)))" Protected value, not to be logged ocsstore ormail 1521 UM_SYSTEM D:\OCS_ONEBOX\mtier Protected value, not to be logged Protected value, not to be logged 1 oramail.exp.com'
    Start output from spawned process:
    C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>rem --- running install_mailstore.bat
    "(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=ormail)(PORT=1521)))(CONNECT_DATA=(SID=ocsstore)))" "<sys_passwd>" "<system_passwd>" "<ctxsys_passwd>" 1521 UM_SYSTEM D:\OCS_ONEBOX\mtier ora123 ora123 "<es_mail_passwd>" "<umadmin_passwd>"
    The system cannot find the path specified.
    The system cannot find the path specified.
    == was unexpected at this time.
    End output from spawned process.
    Invalid Exit Code. The following result code will be used for configuration assistants: 1
    Configuration assistant "Config MailStore" failed
    C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>rem --- running install_mailstore.bat
    "(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=ormail)(PORT=1521)))(CONNECT_DATA=(SID=ocsstore)))" "<sys_passwd>" "<system_passwd>" "<ctxsys_passwd>" 1521 UM_SYSTEM D:\OCS_ONEBOX\mtier ora123 ora123 "<es_mail_passwd>" "<umadmin_passwd>"
    The system cannot find the path specified.
    The system cannot find the path specified.
    == was unexpected at this time.
    Result code for launching of configuration assistant is: 1
    The OUICA command is launched from D:\OCS_ONEBOX\mtier\oui\bin\ouica.bat.
    The following configuration assistants have not been successfully completed. These assistants must be completed for your product to be completely configured.
    Execute file D:\OCS_ONEBOX\mtier\cfgtoollogs/configToolCommands to re-run all skipped/failed configuration assistants.
    echo Config MailStore
    D:\OCS_ONEBOX\mtier/oes/bin/install_mailstore.bat "(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=ormail)(PORT=1521)))(CONNECT_DATA=(SID=ocsstore)))" Protected value, not to be logged ocsstore ormail 1521 UM_SYSTEM D:\OCS_ONEBOX\mtier Protected value, not to be logged Protected value, not to be logged 1 oramail.exp.com
    Error:*** Alert: One or more configuration assistants have not completed successfully. However these are optional, so they are not required for the correct configuration of your system. A list of the configuration assistants that need to be run is generated in the log of this session which is located at:
    C:\Program Files\Oracle\Inventory\logs\installActions2006-02-02_01-53-52PM.log ***
    User Selected: Yes/OK
    Warning:*** Alert: Do you really want to exit? ***
    User Selected: Yes/OK
    The OUICA command is launched from D:\OCS_ONEBOX\mtier\oui\bin\ouica.bat.
    *** End of Installation Page***
    The installation of UM configurator was successful, but some optional configuration assistants failed or were canceled.

    Hi Andreas,
    I already tried your solution but still got error, this is the log file :
    Starting to execute configuration assistants
    Launched configuration assistant 'Config MailStore'
    Tool type is: Optional.
    The command being spawned is: 'D:\ocs_onebox\mtier/oes/bin/install_mailstore.bat "(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=oramail.exp.com)(PORT=1521)))(CONNECT_DATA=(SID=ocsstore)))" Protected value, not to be logged ocsstore oramail.exp.com 1521 UM_SYSTEM D:\ocs_onebox\mtier Protected value, not to be logged Protected value, not to be logged 1 oramail.exp.com'
    Start output from spawned process:
    C:\TMP>rem --- running install_mailstore.bat
    "(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=oramail.exp.com)(PORT=1521)))(CONNECT_DATA=(SID=ocsstore)))" "<sys_passwd>" "<system_passwd>" "<ctxsys_passwd>" 1521 UM_SYSTEM D:\ocs_onebox\mtier ora123 ora123 "<es_mail_passwd>" "<umadmin_passwd>"
    The system cannot find the path specified.
    The system cannot find the path specified.
    == was unexpected at this time.
    End output from spawned process.
    Invalid Exit Code. The following result code will be used for configuration assistants: 1
    Configuration assistant "Config MailStore" failed
    C:\TMP>rem --- running install_mailstore.bat
    "(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=oramail.exp.com)(PORT=1521)))(CONNECT_DATA=(SID=ocsstore)))" "<sys_passwd>" "<system_passwd>" "<ctxsys_passwd>" 1521 UM_SYSTEM D:\ocs_onebox\mtier ora123 ora123 "<es_mail_passwd>" "<umadmin_passwd>"
    The system cannot find the path specified.
    The system cannot find the path specified.
    == was unexpected at this time.
    Result code for launching of configuration assistant is: 1
    The OUICA command is launched from D:\ocs_onebox\mtier\oui\bin\ouica.bat.
    The following configuration assistants have not been successfully completed. These assistants must be completed for your product to be completely configured.
    Execute file D:\ocs_onebox\mtier\cfgtoollogs/configToolCommands to re-run all skipped/failed configuration assistants.
    echo Config MailStore
    D:\ocs_onebox\mtier/oes/bin/install_mailstore.bat "(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=oramail.exp.com)(PORT=1521)))(CONNECT_DATA=(SID=ocsstore)))" Protected value, not to be logged ocsstore oramail.exp.com 1521 UM_SYSTEM D:\ocs_onebox\mtier Protected value, not to be logged Protected value, not to be logged 1 oramail.exp.com
    Error:*** Alert: One or more configuration assistants have not completed successfully. However these are optional, so they are not required for the correct configuration of your system. A list of the configuration assistants that need to be run is generated in the log of this session which is located at:
    C:\Program Files\Oracle\Inventory\logs\installActions2006-02-07_06-35-23PM.log ***
    User Selected: Yes/OK
    *** End of Installation Page***
    The installation of UM configurator was successful, but some optional configuration assistants failed or were canceled.
    Warning:*** Alert: Do you really want to exit? ***
    User Selected: Yes/OK
    The OUICA command is launched from D:\ocs_onebox\mtier\oui\bin\ouica.bat.
    User Exit

  • I'm using Apple Mail 2.1.3 on a MacBook running OS 10.4.11. A very strange thing is happening. E-mail messages that I either sent or received months ago are showing up in my mailbox and receivers' mailboxes. Help!

    I'm using Apple Mail 2.1.3 on a MacBook running OS 10.4.11. A very strange thing is happening. E-mail messages that I either sent or received months ago are showing up in my mailbox and receivers' mailboxes. In one case, a message someone had sent to me wound up in the mailbox of a third person, who was not included in the address list!!  I have only two accounts, and have checked everything; only one account is showing the repeats Now, that account is my professional account, and it resides in three places: I use it on the laptop described here, I use it through Apple Mail on the much newer desktop Mac in my office, and I can run it through Web mail on my employer's server, which is where the professional account resides (I have a mailbox there, etc.) That program is called Zimbra.
    My personal account is with Earthlink and is not doing the repeats. I access it either through my MacBook's Apple Mail or the Web; the Apple Mail on my office Mac is not configured to access the Earthlink server.
    What IS going on here?? My friends, colleagues, and students (I teach college) are mystified by these ancient messages.
    Thanks for any help!!

    I'm using Apple Mail 2.1.3 on a MacBook running OS 10.4.11. A very strange thing is happening. E-mail messages that I either sent or received months ago are showing up in my mailbox and receivers' mailboxes. In one case, a message someone had sent to me wound up in the mailbox of a third person, who was not included in the address list!!  I have only two accounts, and have checked everything; only one account is showing the repeats Now, that account is my professional account, and it resides in three places: I use it on the laptop described here, I use it through Apple Mail on the much newer desktop Mac in my office, and I can run it through Web mail on my employer's server, which is where the professional account resides (I have a mailbox there, etc.) That program is called Zimbra.
    My personal account is with Earthlink and is not doing the repeats. I access it either through my MacBook's Apple Mail or the Web; the Apple Mail on my office Mac is not configured to access the Earthlink server.
    What IS going on here?? My friends, colleagues, and students (I teach college) are mystified by these ancient messages.
    Thanks for any help!!

  • How do I keep Mail messages from vanishing?

    I don't use  iCloud for much, but I have sent a few Mail messages from my iPad (iCloud address) and I have received a few at that address that I need to be able to view on my Mac and to have available for viewing on my iPad. The received messages consistently disappear after a few weeks. The most recent one that I forwarded to my iCloud address from my desktop machine appeared in the list of messages (already a very short list due to the vanishing act) for a nanosecond when I first opened Mail on my iPad, and then vanished. Only a single message is still there out of maybe a dozen messages that ought to be there.
    The iPad is running the most recent iOS version. I use Snow Leopard most of the time on my Mac, but I boot into Mountain Lion when I have to: I sync the iPad in Mountain Lion. I access iCloud through my browser when I'm in Snow Leopard.
    What do I have to set or change to make iCloud e-mail at least minimally useful? I've looked at the settings, and don't see anything obvious. My regular e-mail accounts are configured to never automatically be deleted from the server, but I don't see a way to do that with iCloud mail.

    Ok, just discovered it only does this in split-keyboard mode.

Maybe you are looking for

  • Carbonite backup for my MacBook Pro?

    Do I need to subscribe to Carbonite or is there a better way to backup my Macbook Pro?

  • HTML Mashup works fine in Silverlight, but not in UI5

    Hello community, we are building an integrated Customer Service Management solution for a Client of ours, via the SAP Cloud for Customer platform (solution for Services). Currently, we are trying to embed some external Business Process activities in

  • Web Gallery troubles

    I published a web gallery (album of pictures) to my .mac account, and it worked properly. But I then had to change one of those pictures (actually a title with an error), and I did this by changing it in the iPhoto 08 web gallery. That, too, worked p

  • 9 pin svideo cable for TV OUT

    Hi, I've got an MSI GeForce 4 MX 440 VGA card, which has a 9 pin svideo connector on it. Unfortunately I don't have the svideo adapter cable. Does anyone know where I can get one of these cables? Any help would be much appreciated. Thanks. David.

  • Excel Filter not working in Bex

    Hi All I have a report in Bex where I have a date field called basic date. Now when user is trying to select some basic function like greter than or less than a particular date(When we apply filter in excel we have the optioon Custom where so many op