Configuring NT service with disableWeblogicClassPath

Hi
Due to some classloader issues we start up WebLogic with the following
system property:
-Dweblogic.system.disableWeblogicClassPath=true
and no weblogic.class.path property.
However, when trying to set this up for an NT service using wlconfig,
wlconfig seems to insist on a weblogic.class.path system property. When
that property exists (although empty) WebLogic will not boot.
It seems that you can't run weblogic as an NT service with
weblogic.system.disableWeblogicClassPath=true?
Regards
Steffen Bering Jensen
Systems Architect * Nordija ApS * Denmark

Hi
The problem with t3config and disableWeblogicClassPath (described below) also
seems to exist in WLS 5.1 - sp2.
Regards
Steffen Bering Jensen
Systems Architect * Nordija ApS * Denmark
[email protected] wrote:
I hope that it is fixed in post 4.5.0 versions.
[email protected] wrote:
Steffen
I ran into the same problem with 4.5.0 while using t3config
I would like to know the version you are working with.
Support, please tell me it can be fixed.
Madhu
"Steffen B. Jensen" wrote:
Hi
Due to some classloader issues we start up WebLogic with the following
system property:
-Dweblogic.system.disableWeblogicClassPath=true
and no weblogic.class.path property.
However, when trying to set this up for an NT service using wlconfig,
wlconfig seems to insist on a weblogic.class.path system property. When
that property exists (although empty) WebLogic will not boot.
It seems that you can't run weblogic as an NT service with
weblogic.system.disableWeblogicClassPath=true?
Regards
Steffen Bering Jensen
Systems Architect * Nordija ApS * Denmark

Similar Messages

Error configuring shared services with Oracle 11g database

I've installed Hyperion EPM 11.1.1.3 and orale 11g successfully. My problem though is that when i tried to do the configuration,
the error message states 'Unable to check Shared Services database existence: an error occured.'
---------My Environment:--------
EPM Server: Windows Server 2003 SP1 32-bit
RDBMS: Oracle Enterprise Edition 11g (running on same server 2003)
Oracle Client: 11g (full client install)
SID name :- orcl
------------Here are the components that I've installed--------
- V17397-01(EPM Foundation Services p-1)
- V17369-01(EPM Foundation Services p-2)
- V17370-01(EPM Foundation Services p-3)
- V17371-01(EPM Foundation Services p-4)
- V17389-01(server)
- V17388-01(Client)
- V17390-01(Provider Service)
- V17378-01(Financial Reporting)
- V17380-01(Web Analysis)
- V17398-01(EPM Architect)
- V17402-01(Smart View for Office)
all files are extracted in a single folder using winrar tool.
I can't proceed with the shared services configuration because in just the first page of it, I'm encountering the error Unable to check Shared Services database existence: an error occured.'
I believed the shared services is bundled with the foundation if I'm not mistaken, because I can't find any download related to it on edelivery site.
I tried to configure only the Foundation components but the '*Comman setting*' & '*configure database*' are grayed out so I have no option but to figure out first this shared services configuration.
below are the logs
---------------configtool.log--------------
(Jul 04, 2010, 02:53:29 AM), com.hyperion.config.wizard.impl.RegistryWizardState$1, DEBUG, validate
(Jul 04, 2010, 02:53:29 AM), com.hyperion.config.wizard.impl.RegistryWizardState, DEBUG, connect test
(Jul 04, 2010, 02:53:29 AM), com.hyperion.config.wizard.impl.RegistryWizardState, DEBUG, driver set
(Jul 04, 2010, 02:53:29 AM), com.hyperion.config.wizard.impl.RegistryWizardState, DEBUG, server= hyperion
(Jul 04, 2010, 02:53:29 AM), com.hyperion.config.wizard.impl.RegistryWizardState, DEBUG, whiteSpace remove
(Jul 04, 2010, 02:53:29 AM), com.hyperion.config.wizard.impl.RegistryWizardState, DEBUG, begin test cycle
(Jul 04, 2010, 02:53:29 AM), com.hyperion.config.wizard.impl.RegistryWizardState, DEBUG, define driver
(Jul 04, 2010, 02:53:29 AM), com.hyperion.config.wizard.impl.RegistryWizardState, DEBUG, make connection
(Jul 04, 2010, 02:53:29 AM), com.hyperion.config.wizard.impl.RegistryWizardState, DEBUG, set URL
(Jul 04, 2010, 02:53:29 AM), com.hyperion.config.wizard.impl.RegistryWizardState$1, DEBUG, connection is NOT null
(Jul 04, 2010, 02:53:29 AM), com.hyperion.config.wizard.impl.DBConnectionForm, DEBUG, DB type string = Oracle
(Jul 04, 2010, 02:53:29 AM), com.hyperion.cis.config.AbstractProductDBConfigurator, DEBUG, JDBC driver class is hyperion.jdbc.oracle.OracleDriver
(Jul 04, 2010, 02:53:29 AM), com.hyperion.cis.config.AbstractProductDBConfigurator, DEBUG, Connection URL: jdbc:hyperion:oracle://hyperion:1521;SID=orcl
(Jul 04, 2010, 02:53:29 AM), com.hyperion.config.wizard.impl.RegistryWizardState$1, DEBUG, validate CREATE_NEW, no registry DB exists, create it
(Jul 04, 2010, 02:53:29 AM), com.hyperion.hit.registry.RegistryConnection, ERROR, SQL Exception [Hyperion][Oracle JDBC Driver][Oracle]ORA-01031: insufficient privileges CAUSE null
(Jul 04, 2010, 02:53:29 AM), com.hyperion.config.wizard.impl.RegistryWizardState$1, ERROR, com.hyperion.hit.registry.exceptions.RegistryException: Unable to create registry.
(Jul 04, 2010, 02:53:29 AM), com.hyperion.cis.config.wizard.adapter.WizardFormAdapterPanel, ERROR, Unable to check Shared Services database existence: an error occured.
------------configtool_err.log------------
(Jul 04, 2010, 02:53:29 AM), com.hyperion.hit.registry.RegistryConnection, ERROR, SQL Exception [Hyperion][Oracle JDBC Driver][Oracle]ORA-01031: insufficient privileges
CAUSE null
(Jul 04, 2010, 02:53:29 AM), com.hyperion.config.wizard.impl.RegistryWizardState$1, ERROR, com.hyperion.hit.registry.exceptions.RegistryException: Unable to create registry.
(Jul 04, 2010, 02:53:29 AM), com.hyperion.cis.config.wizard.adapter.WizardFormAdapterPanel, ERROR, Unable to check Shared Services database existence: an error occured.
Hope to here from Some one.
Any help would be appreciated. Thank you.

Thanx John for your kind reply. i reffred your other posts and those are very helpfull for me.
I don't have any previous ver. of Hyperion. and i created a new database 'Orcl' for configuring the shared services and given the user name as 'hss'. i also tried to delete my old database and and reg.properties file from Hyperion Dir u suggested in some other post. but still its not working.
Today I have started again with fres installation of Windows Server 2003 oracle 11g EPM 11.1.3.
Also I m Installing this on VMware. I hope this is not the issue as i already installed Microsoft Loopback Adapter.
I will let you know the updates.
but still looking forward for your Kind help.
Edited by: Gaurav_Choudhari on Jul 5, 2010 12:37 AM

Troble configuring Hyperion Shared Services with SQL Server 2005

I recently installed SQL server (SQL SERVER 2005) in my machine and then am trying to install Hyperion (9.3.1) products. I started with Shared services. It was installed successfully. Problem is occuring when am trying to configure Shared service with SQL database using Hyperion Configuration utility (9.3.1)
The error which is popping up is
Unable to connect to the database for the product Hyperion Shared Services.
Things which I tried from my end
1. Made sure TCP IP Protocol was enabled in SQL server configuration server.
2. hypuser was created in SQl server.
3. hypdb was created in SQL server.
4. Was having dynamic IP address so install Loopback adapter to obtain Static IP address and port.
5. Port and IP address was correct.
Let me know where I am going wrong.
Any help will be greatly appreciated.

Finally got it fixed firewall settings needed to be change : This document helped me a lot to troubleshoot the issue
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) (Microsoft SQL Server, Error: 2)
This problem may occur when SQL Server 2005 is not configured to accept incoming local and remote connections, which is disabled by default in SQL Server 2005 Express Edition, SQL Server 2005 Developer Edition and also SQL Server 2005 Enterprise Edition. To solve the connection forbidden problem, SQL Server 2005 needs to configure to allow incoming local and remote connections.
Firstly, ensure that SQL Server 2005 is configured properly to allow incoming connections on the instance of database server, else enable and turn on the local and remote connections setting.
Click Start button, then go to Programs or All Programs, then select Microsoft SQL Server 2005, followed by Configuration Tools. Click and run the SQL Server Surface Area Configuration.
On the “SQL Server 2005 Surface Area Configuration” page, click Surface Area Configuration for Services and Connections.
On the “Surface Area Configuration for Services and Connections” page, expand Database Engine tree, click Remote Connections.
Select Local and remote connections, or Local connections only which applicable only if there is no remote system tries to connect to the SQL Server, useful when you just trying to connect and authenticate with the server after installing.
Select the appropriate protocol to enable to local and/or remote connections environment. To ensure maximum compatibility, select Using both TCP/IP and named pipes.
Click Apply button when done.
Click OK button when prompted with the message saying that “Changes to Connection Settings will not take effect until you restart the Database Engine service.”
On the “Surface Area Configuration for Services and Connections” page, expand Database Engine, then click Service.
Click Stop button to stop the SQL Server service.
Wait until the MSSQLSERVER service stops, and then click Start button to restart the MSSQLSERVER service.
Secondly, SQL Server Browser service has to be enabled to allow for local and remote connections if SQL Server 2005 is running by using an instance name and users are not using a specific TCP/IP port number in the connection string.
Click Start button, then go to Programs or All Programs, then select Microsoft SQL Server 2005, followed by Configuration Tools. Click and run the SQL Server Surface Area Configuration.
On the “SQL Server 2005 Surface Area Configuration” page, click Surface Area Configuration for Services and Connections.
On the “Surface Area Configuration for Services and Connections” page, click SQL Server Browser.
Select Automatic as the Startup type to start SQL Server Browser service automatically every time system starts.
Click Apply button.
Click on Start button to start the service immediately.
Click OK button.
Finally, if remote computer needs to connect and access SQL Server, an exceptions in Windows Firewall included in Windows XP SP2 (Service Pack 2), Windows Server 2003 and Windows Vista needs to be created. If you’re using third-party firewall system, the exception rules also needed to be created to allow external remote connections to the SQL Server 2005 and SQL Server Browser Service to communicate through the firewall, else connections will be blocked. Consult the firewall manual for more details. Each instance of SQL Server 2005 must have its own exception, together with an exclusion for SQL Server Browser service.
SQL Server 2005 uses an instance ID as part of the path when you install its program files. To create an exception for each instance of SQL Server, you must identify the correct instance ID. To obtain an instance ID, follow these steps:
Click Start button, then go to Programs or All Programs, then select Microsoft SQL Server 2005, followed by Configuration Tools. Click and run the SQL Server Configuration Manager.
In “SQL Server Configuration Manager”, click the SQL Server Browser service in the right pane, right-click the instance name in the main window, and then click Properties.
On the “SQL Server Browser Properties” page, click the Advanced tab, locate the instance ID in the property list.
Click OK button.
Then create an exception for SQL Server 2005 in Windows Firewall.
Click on Start button, the click on Run and type firewall.cpl, and then click OK. For Windows Vista, type firewall.cpl in Start Search box and press Enter key, then click on Allow a program through Windows Firewall link on left tasks pane.
In “Windows Firewall”, click the Exceptions tab, and then click Add Program.
In the “Add a Program” window, click Browse button.
Click the C:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\Binn\sqlservr.exe executable program, click Open button. MSSQL.1 with is a placeholder for the instance ID that is obtained from previous procedure. Note that the path may be different depending on where SQL Server 2005 is installed.
Click OK button.
Repeat steps 1 through 5 for each instance of SQL Server 2005 that needs an exception.
For SQL Server Browser service, locate the C:\Program Files\Microsoft SQL Server\90\Shared\sqlbrowser.exe executable program, and click Open button.
Click OK button.

Integrating SMS service with E Business Suite

Hi,
We are looking forward to configure sms service with our EBS 11i and R12.1.1. Need to send sms messages in mobiles for modules like HRMS, Learning management, recritement etc. Also general alerts and notifications.
Need any pointers, tips, reference or documentation regarding the same.. Would be of great help
Thanks..
Kshitij

Hi user;
Please check:
Can SMS Be Sent To Mobile Phone Once Order Is Ship Confirmed? [ID 757146.1]
Mobile Field Service Auto Synchronization and Notification [ID 414838.1]
Also check:
Using Mobile Devices with Oracle E-Business Suite
http://blogs.oracle.com/stevenChan/2010/01/mobile_devices_ebs.html
http://blogs.oracle.com/stevenChan/2008/11/oracle_business_approvals_for_managers_iphone_app_now_available.html
INTEGRATION OF ORACLE APPS WITH MOBILE SMS
INTEGRATION OF ORACLE APPS WITH MOBILE SMS
Hope it helps
Regard
Helios

How configure reporting services configuration with sql server business development studio

I have installed sql server 2008 r2 mixed mode(sql server authentication) with native mode
I want to run report using reporting services config manager.
I made report in ssrs and I have configured reporting services configuration and web url from RSCM( reporting services config manager), i put on ssrs report.
report is build and deployed but when i take deployed url on Internet explorer, it shows the window below:
when I put the password nothing happened . if I put url in google chrome then it shows authentication required window like the same in IE
if I passed username=(levent/sa) and password then goes on window but does not see on page, if I passed only administrator name (levent) not passed sql server login name (sa) then does not close 'Authentication window'
'Computer connect net with modem'
before i tried on earlier PC, it worked fine.
setting is below link like this.
only set service Account is Use_built=NetworkSrvice
link
http://www.azurecurve.co.uk/2012/02/how-to-configure-sql-server-reporting-services-in-order-to-deploy-reporting-services-reports-in-gp/
what is the problem
Plz give suggestion quickly

Hi tusharshinde,
Per my understanding that when you log in the report Manager you got the pop-up window ask for credential, you try to enter the SA account and the window account as the username and password but both not work, right?
Your issue related to the authentication. As you mentioned you have choose the ”Network Service” as the Service account, generally using this account in RSCM and RSWindowsNegotiate is added to the RSReportServer.config file as the default setting. With this
setting, the report server can accept requests from client applications requesting Kerberos or NTLM authentication. If Kerberos is requested and the authentication fails, the report server switches to NTLM authentication and prompts the user for credentials
unless the network is configured to manage authentication transparently.
The issue can be caused by many factors and please check one by one.
Did you enter the username and password for three times and got blank page or got some error? If you got some error, please provide the error information.
you can delete the specific Authorization Types inside rsreportserver.config file, open path:” \Program Files\Microsoft SQL Server\MSRS10_50.MSSQLSERVER\Reporting Services\ReportServer\rsreportserver.config”.
Search the file for the “AuthenticationTypes” section. Remove RSWindowsNegotiate and RSWindoeBasic to ensure only “RSWindowsNTLM” is specified in the file rsreportserver.config file.
Before do any modification, back up the files and remember to restart the ReportServer instance in the RSCM after the modification.
If step1 doesn’t work ,please also do the trusted Site Setting in the Browser, article with details steps for your reference:
http://technet.microsoft.com/en-us/library/bb630430.aspx
Please check the Report Manager's authentication mode.Have a look in the Report Manager's web.config file to check if you can find below information under the <system.web> (Path is “C:\Program Files\Microsoft SQL Server\MSRS10_50.MSSQLSERVER\Reporting
Services\ReportManager\Web.config ” ).
authentication mode="Windows"
identity impersonate="True"
Similar threads for your reference:
https://social.msdn.microsoft.com/Forums/sqlserver/en-US/23c5daa0-3232-4e8c-89c9-4526960c9d14/ssrs-2008-credentials-login-prompt?forum=sqlreportingservices
https://social.msdn.microsoft.com/Forums/sqlserver/en-US/0778e2ca-0fb1-4b5c-996c-6e327b5e1473/user-logon-credentials-for-ssrs-web-server-setup?forum=sqlreportingservices
Please tried to provide us more details information, if the problem still exists:
Did you login in the report manager locally or remotely via Browser and which URL you are using to login the Report manager?
Did you modified some configuration file before and what did you modified?
Did your windows account have the right permission to access the report manager?
Any problem, please feel free to ask.
Regards
Vicky Liu

How to configure the services(WDA) in ESS with EHP7

Hi Experts,
I have a requirement to configure ESS/MSS in R/3 . fisrt time am going to configure the ESS/MSS in R/3 with EHP7.currently we are using
ECC6.0 EHP7 with SP 2 and portal 7.4 can any one help me out which business functions need to be activate and which components need to activate.
How to configure the service in launch pad with WDA.please guide me the step by step procedure.
Please share the config guide if anyone have.

hi sap scn ,
Tips & Recommendations for customizing ESS Menu (WD ABAP) - ess launchpad
Summary of configuration options in ESS Personal Information scenario -personal information
go to t-code lpd_cust see ROLE ESS and INSTNACE MENU ...Clcik it and copy to Z launchpad and drag and drop the services which u want and use it
if any other revert back again

Sending Idocs to R/3 Error when Business Service with a party is configured

Hi All,
I'm facing some issue when posting idocs (FINSTA) back to R/3 when Business Service with a party is configured in my Integration Directory. However, I do not have this problem, if the
Business System without Party is configured. It seems that 'adapter specific' setting doesn't
seem to work when you have a party.
I have read the same problem faced by other SDN members as well, some suggested to have the latest patch to solve the problem. FYI, I'm using latest patch SP 15, but the problem still exist. The error that I have in the sxmb_moni is "Unable to convert sender XI party http://sap.com/xi/XI / XIParty / GABXI100 to an IDoc partner".
Please assist. Thanks.

Hi Arun,
Thanks for reply.
What do you mean by XI Party must map to a party in the R3 in the partner profile?
For example, If my Party Name in Integration Directory is ABC01, I should create a partner profile of ABC01 in my R3? How if I have business service under the Party ABC001, what should I configure in my R3?
Currently My Partner Profile in R3 is type 'B' - Bank.
Thanks for helps.

MDM 2: Unable to configure PageMaintenance Service deployed with cm.jar

Hello everyone,
we have a problem when we try to build a Business Service which maps a custom @PageMaintenance service. Artifacts and cm.jar seem to be created correctly, however when we create the Business Service which maps the Service Program (type: Java) we get the following error:
- 229774-174-1 2011-03-15 18:14:18,756 [[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] ERROR (support.schema.AbstractSchemaInfoCache) Error nitializing schema data for BusinessService_Per[CMTEST]: com.splwg.shared.common.ApplicationWarning: The Business Service CMTEST references program service CMTEST, which is not a valid service with meta-info, etc.
Looking at spl_service.log we found this WARNING:
2011-03-15 17:39:42,728 [[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] WARN (shared.environ.ContextManagedObjectSet) Could not load resource com/splwg/cm/domain/contextManagedObjects.xml on classpath. This may be harmless but could mean a problem with the classpath. Please verify that the classpath for application cm is correctly configured.The mentioned contextManagedObjects.xml is inside the produced cm.jar, in the right path, but we can't understand why is not loaded. Any suggestion?
We are using MDM 2.0.1 with SDK 4.0.0.5.
On previous version (MDM 2.0.0 with SDK 4.0.0.4) everything was w0rking fine.
Thanks,
Ganto

Hi,
Is the artifact generator generated the following files?
a. Gen classes
b. Entry for package in contextManagedObjects.xml file under gen/com/splwg/cm/domain dir
c. XML file for the service program name mentioned in the Page Service Class annotation. (xml file will be created with list service name for each list service mentioned in the page service). ex, CMTEST.xml
And refresh the project and deploy the project to create cm.jar. Restart the application.

Can cisco MSE(mobility service engine) configured to work with non-cisco access points?

I understand that access points can be configured to forwards all the probe requests to cisco wifi controller. cisco MSE(mobility service engine) gets the probes from wifi controller to find the location of the mobile devices.
My question, can cisco MSE(mobility service engine) be configured to work with non-cisco access points?

No and the reason why is the NMSP communication from the MSE to the WLC. Other vendors don't support this so there is no communication happening.
-Scott

Issue with OSI PI WCF Web Service with wshttpbinding

Hi Experts,
System Details:
SAP MII 14 SP4
OSI PI Web Service: PITimeSeries
I am having issue when trying to call OSI PI web service using http post. it is returning status 0 when i am using exception handler in BLS.
Same web service works fine with basichttpbinding (SOAP 1.1) but with wshttpbinding (SOAP 1.2) it is giving error.
Following are Web config binding details for web service.
      <wsHttpBinding>
        <binding name="wsBinding_2011" sendTimeout="00:01:00" receiveTimeout="00:10:00" bypassProxyOnLocal="false" transactionFlow="false" hostNameComparisonMode="StrongWildcard" maxBufferPoolSize="524288" maxReceivedMessageSize="65536" messageEncoding="Text" textEncoding="utf-8" useDefaultWebProxy="true" allowCookies="false">
          <reliableSession ordered="true" inactivityTimeout="00:10:00" enabled="false" />
          <security mode="Message">
            <message clientCredentialType="Windows" negotiateServiceCredential="true" algorithmSuite="Default" establishSecurityContext="true" />
          </security>
        </binding>
      </wsHttpBinding>
I am not sure it could be the issue with passing windows credentials.
Did anybody consumed WCF web service with wshttpbinding with security mode as Message and clientCredentialType as Windows.
Also i was trying to pass MYSAPSSO2 SSO token to service in http post but first i am not sure if this is correct windows token and second which header property of service should be mapped and i am not sure that I am going into correct direction or not.
Please let me know what i am missing.
I have tried following other options and tools:
SOAP UI: basichttpbinding works fine for wshttpbinding receiving Internal Server error in log and Response as
                  The security context token is expired or is not valid.
MII Web Service Action Block: basichttpbinding works fine for wshttpbinding not able to configure url through wizard because as per                                                                              my discussion with other MII experts MII does not support SOAP1.2. that is one reason for using http post.
WCF Storm: both bindings works fine (There is option to select windows authentication and Impersonation level as delegation)
WCF Test Client: Both bindings works fine
Any help is appreciated.
Thanks & Regards,
Manoj Bilthare

Hi Sam,
The web service is valid following are details of testing on various tools.
SOAP UI: basichttpbinding works fine for wshttpbinding receiving Internal Server error in log and Response as The security context token is expired or is not valid.
MII Web Service Action Block: basichttpbinding works fine for wshttpbinding not able to configure url through wizard because as per my discussion with other MII experts MII does not support SOAP1.2. that is one reason for using http post.
WCF Storm: both bindings works fine (There is option to select windows authentication and Impersonation level as delegation)
WCF Test Client: Both bindings works fine
Please let me know if additional details required.
Thanks & Regards,
Manoj Bilthare

Install and configure report service on Oracle Application Server 10g

i want to know how to install and configure report service on Oracle Application Server 10g Release 3 (10.1.3.1.0)
Thanks

the case is that we developed an ADF Application, so we want to deploy it on the latest version of Oracle Application server.
our application communicate with Oracle reports (run oracle reports from our Application) as there are no Oracle report products for JEE Application.
so if there are not report service that can run on Oracle Application Server 10g Release 3 (10.1.3.1.0),
what is the other choices that oracle supports that can help us in this case ???

Error while publishing a service with WSPUBLISH: Error publishing Endpoint

Hallo,
I've a problem while publishing a service which a had created via proxy. I configured the service and one endpoint (binding) in SOAMANAGER. When I publish the service in WSPUBLISH I get the error:
'Error publishing Endpoint for SD : <Proxy>, Service : <Service>, EP : <Endpoint>.
with details:
'10160A save request exceeded the quantity limits for a given structure type .#Number of BusinessEntities exceeds your limit of 1 (2)'
In the Service Registry I can find the service but without endpoints.
Does anybody know what happend ?
We use a SAP NetWeaver 7.10 with SP05 (SAPKB71005) but the same error happens if I publish a service from a CRM 5.0 with SP15 (SAPKB70015) to the Service Registry of the 7.10
Christoph

This is my steps to publish ES to SR:
1. Create RFC destination in SM59
2. Create ES Parameter in WSPARAM
3. Create logical port for SR in LPCONFIG
4. Release Web Service for SOA Runtime in WSCONFIG
5. Publish ES in WSPUBLISH.
When i was using SOAMANAGER to manually create the endpoint, the endpoint in the SR doesnt works though.
eg, Business Administration -> WS Administration -> Search for CRM_BPBASICDATABYIDQR -> Apply selection -> Configuration -> Create Service -> enter new service name and new binding name -> user id/password for HTTP Authentication -> save.
It works after i released it in WSCONFIG (ya, i know it's old way) and re-publish.
-julius

Configuration Manager services stoping on regular basis.

we have installed and configured WebCenter Interaction 10.3 on Windows 2003 (x86) and using JVM 1.5.0_09.
Running all the component as windows services. Today our Configuration Manager services is stopping on regular basis.
Error:
================================================================================================
STATUS | wrapper | 2009/08/06 06:14:48 | --> Wrapper Started as Service
WARN | wrapper | 2009/08/06 06:14:48 | The value of property 'wrapper.java.additional.2', '%JVM_2%' is not a valid argument to the jvm. Skipping.
WARN | wrapper | 2009/08/06 06:14:48 | The value of property 'wrapper.java.additional.3', '%JVM_3%' is not a valid argument to the jvm. Skipping.
WARN | wrapper | 2009/08/06 06:14:48 | The value of property 'wrapper.java.additional.4', '%JVM_4%' is not a valid argument to the jvm. Skipping.
WARN | wrapper | 2009/08/06 06:14:48 | The value of property 'wrapper.java.additional.5', '%JVM_5%' is not a valid argument to the jvm. Skipping.
WARN | wrapper | 2009/08/06 06:14:48 | The value of property 'wrapper.java.additional.6', '%JVM_6%' is not a valid argument to the jvm. Skipping.
WARN | wrapper | 2009/08/06 06:14:48 | The value of property 'wrapper.java.additional.7', '%JVM_7%' is not a valid argument to the jvm. Skipping.
WARN | wrapper | 2009/08/06 06:14:48 | The value of property 'wrapper.java.additional.8', '%JVM_8%' is not a valid argument to the jvm. Skipping.
WARN | wrapper | 2009/08/06 06:14:48 | The value of property 'wrapper.java.additional.9', '%JVM_9%' is not a valid argument to the jvm. Skipping.
WARN | wrapper | 2009/08/06 06:14:48 | The value of property 'wrapper.java.additional.10', '%BIT_MODE%' is not a valid argument to the jvm. Skipping.
STATUS | wrapper | 2009/08/06 06:14:48 | Launching a JVM...
INFO | jvm 1 | 2009/08/06 06:14:50 | Wrapper (Version 3.2.3) http://wrapper.tanukisoftware.org
INFO | jvm 1 | 2009/08/06 06:14:50 | Copyright 1999-2006 Tanuki Software, Inc. All Rights Reserved.
INFO | jvm 1 | 2009/08/06 06:14:50 |
INFO | jvm 1 | 2009/08/06 06:14:50 |
INFO | jvm 1 | 2009/08/06 06:14:50 | WARNING - Unable to load the Wrapper's native library 'wrapper.dll'.
INFO | jvm 1 | 2009/08/06 06:14:50 | The file is located on the path at the following location but
INFO | jvm 1 | 2009/08/06 06:14:50 | could not be loaded:
INFO | jvm 1 | 2009/08/06 06:14:50 | C:\bea\alui\configmgr\2.0\bin\..\..\..\common\wrapper\3.2.3\lib\native\win32\wrapper.dll
INFO | jvm 1 | 2009/08/06 06:14:50 | Please verify that the file is readable by the current user
INFO | jvm 1 | 2009/08/06 06:14:50 | and that the file has not been corrupted in any way.
INFO | jvm 1 | 2009/08/06 06:14:50 | One common cause of this problem is running a 32-bit version
INFO | jvm 1 | 2009/08/06 06:14:50 | of the Wrapper with a 64-bit version of Java, or vica versa.
INFO | jvm 1 | 2009/08/06 06:14:50 | This is a 64-bit JVM.
INFO | jvm 1 | 2009/08/06 06:14:50 | Reported cause:
INFO | jvm 1 | 2009/08/06 06:14:50 | no wrapper in java.library.path
INFO | jvm 1 | 2009/08/06 06:14:50 | System signals will not be handled correctly.
INFO | jvm 1 | 2009/08/06 06:14:50 |
INFO | jvm 1 | 2009/08/06 06:14:50 | OpenLog: verbosity level = 2
INFO | jvm 1 | 2009/08/06 06:14:50 | bid.bootstrap.loglevel=info+
INFO | jvm 1 | 2009/08/06 06:14:50 | 8-6-2009     6:14:50.872     Info     OpenKernel.Config     Disabled-1249553690622     WrapperStartStopAppMain     com.plumtree.openkernel.impl.config.providers.ConfigXMLFileProvider     Loading config data from C:\bea\alui\configmgr\2.0\bin\../settings/config
INFO | jvm 1 | 2009/08/06 06:14:51 | 8-6-2009     6:14:51.419     Info     OpenKernel.Config     Disabled-1249553690622     WrapperStartStopAppMain     com.plumtree.openkernel.impl.config.providers.ConfigXMLFileProvider     Setting subscription data.
INFO | jvm 1 | 2009/08/06 06:14:51 | container config context:EAS:configurator
INFO | jvm 1 | 2009/08/06 06:14:51 | OpenLog: Registered application name: ConfigInitialization (local machine only)
INFO | jvm 1 | 2009/08/06 06:14:51 | OpenLog: Configuration component contained no logging settings. Creating disabled log service.
INFO | jvm 1 | 2009/08/06 06:14:53 | Aug 6, 2009 6:14:53 AM org.apache.coyote.http11.Http11Protocol init
INFO | jvm 1 | 2009/08/06 06:14:53 | INFO: Initializing Coyote HTTP/1.1 on http-12345
INFO | jvm 1 | 2009/08/06 06:14:53 | Aug 6, 2009 6:14:53 AM org.apache.catalina.startup.Catalina load
INFO | jvm 1 | 2009/08/06 06:14:53 | INFO: Initialization processed in 1157 ms
INFO | jvm 1 | 2009/08/06 06:14:53 | Aug 6, 2009 6:14:53 AM org.apache.catalina.core.StandardService start
INFO | jvm 1 | 2009/08/06 06:14:53 | INFO: Starting service cm
INFO | jvm 1 | 2009/08/06 06:14:53 | Aug 6, 2009 6:14:53 AM org.apache.catalina.core.StandardEngine start
INFO | jvm 1 | 2009/08/06 06:14:53 | INFO: Starting Servlet Engine: Apache Tomcat/6.0.14
INFO | jvm 1 | 2009/08/06 06:14:53 | Aug 6, 2009 6:14:53 AM org.apache.catalina.startup.HostConfig deployWAR
INFO | jvm 1 | 2009/08/06 06:14:53 | INFO: Deploying web application archive cm.war
INFO | jvm 1 | 2009/08/06 06:14:55 | Aug 6, 2009 6:14:55 AM org.apache.catalina.realm.JAASRealm setContainer
INFO | jvm 1 | 2009/08/06 06:14:55 | INFO: Set JAAS app name cm
INFO | jvm 1 | 2009/08/06 06:14:55 | 06 Aug 2009 06:14:55,810 INFO - Reading standard config org/apache/myfaces/resource/standard-faces-config.xml [FacesConfigurator:151]
INFO | jvm 1 | 2009/08/06 06:14:56 | 06 Aug 2009 06:14:56,200 INFO - Reading config jar:file:/C:/bea/alui/common/container/tomcat/6.0.14/work/cm/localhost/cm/WEB-INF/lib/jsf-facelets.jar!/META-INF/faces-config.xml [FacesConfigurator:250]
INFO | jvm 1 | 2009/08/06 06:14:56 | 06 Aug 2009 06:14:56,200 INFO - Reading config jar:file:/C:/bea/alui/common/container/tomcat/6.0.14/work/cm/localhost/cm/WEB-INF/lib/opencontrols-framework.jar!/META-INF/faces-config.xml [FacesConfigurator:250]
INFO | jvm 1 | 2009/08/06 06:14:56 | 06 Aug 2009 06:14:56,200 INFO - Reading config jar:file:/C:/bea/alui/common/container/tomcat/6.0.14/work/cm/localhost/cm/WEB-INF/lib/opencontrols.jar!/META-INF/faces-config.xml [FacesConfigurator:250]
INFO | jvm 1 | 2009/08/06 06:14:56 | 06 Aug 2009 06:14:56,294 INFO - Reading config jar:file:/C:/bea/alui/common/container/tomcat/6.0.14/work/cm/localhost/cm/WEB-INF/lib/tomahawk-1.1.3.jar!/META-INF/faces-config.xml [FacesConfigurator:250]
INFO | jvm 1 | 2009/08/06 06:14:56 | 06 Aug 2009 06:14:56,294 INFO - Reading config /WEB-INF/faces-config.xml [FacesConfigurator:411]
INFO | jvm 1 | 2009/08/06 06:14:56 | 06 Aug 2009 06:14:56,341 WARN - Locale name in faces-config.xml null or empty, setting locale to default locale : en_US [LocaleUtils:52]
INFO | jvm 1 | 2009/08/06 06:14:56 | OpenLog: verbosity level = 2
INFO | jvm 1 | 2009/08/06 06:14:56 | OpenLog: Registered application name: OpenControls.winapaqlog4
INFO | jvm 1 | 2009/08/06 06:14:56 | OpenControls.winapaqlog4
INFO | jvm 1 | 2009/08/06 06:14:57 | 06 Aug 2009 06:14:57,154 WARN - Ignored element 'dispatcher' as child of 'filter-mapping'. [WebXmlParser:347]
INFO | jvm 1 | 2009/08/06 06:14:57 | 06 Aug 2009 06:14:57,154 WARN - Ignored element 'dispatcher' as child of 'filter-mapping'. [WebXmlParser:347]
INFO | jvm 1 | 2009/08/06 06:14:57 | 06 Aug 2009 06:14:57,169 INFO - ServletContext 'null' initialized. [StartupServletContextListener:99]
INFO | jvm 1 | 2009/08/06 06:14:57 | 06 Aug 2009 06:14:57,169 INFO - Serialization provider : class org.apache.myfaces.shared_impl.util.serial.DefaultSerialFactory [StartupServletContextListener:140]
INFO | jvm 1 | 2009/08/06 06:14:57 | 06 Aug 2009 06:14:57,185 INFO - Root WebApplicationContext: initialization started [ContextLoader:174]
INFO | jvm 1 | 2009/08/06 06:14:57 | Aug 6, 2009 6:14:57 AM org.apache.catalina.core.ApplicationContext log
INFO | jvm 1 | 2009/08/06 06:14:57 | INFO: Loading Spring root WebApplicationContext
INFO | jvm 1 | 2009/08/06 06:14:57 | 06 Aug 2009 06:14:57,263 INFO - JDK 1.4+ collections available [CollectionFactory:76]
INFO | jvm 1 | 2009/08/06 06:14:57 | 06 Aug 2009 06:14:57,263 INFO - Commons Collections 3.x available [CollectionFactory:80]
INFO | jvm 1 | 2009/08/06 06:14:57 | 06 Aug 2009 06:14:57,294 INFO - Loading XML bean definitions from ServletContext resource [WEB-INF/applicationContext-acegi-security.xml] [XmlBeanDefinitionReader:347]
INFO | jvm 1 | 2009/08/06 06:14:57 | 06 Aug 2009 06:14:57,607 INFO - Bean factory for application context [Root WebApplicationContext]: org.springframework.beans.factory.support.DefaultListableBeanFactory defining beans [acegiFilterChainProxy,httpSessionContextIntegrationFilter,securityRequestFilter,exceptionTranslationFilter,filterSecurityInterceptor,authenticationManager,daoAuthenticationProvider,userDetailsService,authenticationBean]; root of BeanFactory hierarchy [XmlWebApplicationContext:100]
INFO | jvm 1 | 2009/08/06 06:14:57 | 06 Aug 2009 06:14:57,622 INFO - 9 beans defined in application context [Root WebApplicationContext] [XmlWebApplicationContext:322]
INFO | jvm 1 | 2009/08/06 06:14:57 | 06 Aug 2009 06:14:57,654 INFO - Unable to locate MessageSource with name 'messageSource': using default [[email protected]9d] [XmlWebApplicationContext:473]
INFO | jvm 1 | 2009/08/06 06:14:57 | 06 Aug 2009 06:14:57,654 INFO - Unable to locate ApplicationEventMulticaster with name 'applicationEventMulticaster': using default [org.springframework.context.event.SimpleApplicationEventMulticaster@f0f2f1e] [XmlWebApplicationContext:495]
INFO | jvm 1 | 2009/08/06 06:14:57 | 06 Aug 2009 06:14:57,654 INFO - Unable to locate ThemeSource with name 'themeSource': using default [[email protected]f0fdecd] [UiApplicationContextUtils:83]
INFO | jvm 1 | 2009/08/06 06:14:57 | 06 Aug 2009 06:14:57,654 INFO - Pre-instantiating singletons in factory [org.springframework.beans.factory.support.DefaultListableBeanFactory defining beans [acegiFilterChainProxy,httpSessionContextIntegrationFilter,securityRequestFilter,exceptionTranslationFilter,filterSecurityInterceptor,authenticationManager,daoAuthenticationProvider,userDetailsService,authenticationBean]; root of BeanFactory hierarchy] [DefaultListableBeanFactory:261]
INFO | jvm 1 | 2009/08/06 06:14:57 | 06 Aug 2009 06:14:57,888 INFO - Validated configuration attributes [AbstractSecurityInterceptor:220]
INFO | jvm 1 | 2009/08/06 06:14:57 | 06 Aug 2009 06:14:57,888 INFO - Using context class [org.springframework.web.context.support.XmlWebApplicationContext] for root WebApplicationContext [ContextLoader:189]
INFO | jvm 1 | 2009/08/06 06:14:57 | 06 Aug 2009 06:14:57,888 INFO - Root WebApplicationContext: initialization completed in 703 ms [ContextLoader:199]
INFO | jvm 1 | 2009/08/06 06:14:57 | 06 Aug 2009 06:14:57,904 INFO - Initializing filter 'RequestContextFilter' [RequestContextFilter:152]
INFO | jvm 1 | 2009/08/06 06:14:57 | 06 Aug 2009 06:14:57,904 INFO - Filter 'RequestContextFilter' configured successfully [RequestContextFilter:177]
INFO | jvm 1 | 2009/08/06 06:14:58 | Aug 6, 2009 6:14:57 AM org.apache.catalina.startup.HostConfig deployWAR
INFO | jvm 1 | 2009/08/06 06:14:58 | INFO: Deploying web application archive ROOT.war
INFO | jvm 1 | 2009/08/06 06:14:58 | Aug 6, 2009 6:14:58 AM org.apache.coyote.http11.Http11Protocol start
INFO | jvm 1 | 2009/08/06 06:14:58 | INFO: Starting Coyote HTTP/1.1 on http-12345
INFO | jvm 1 | 2009/08/06 06:14:58 | Aug 6, 2009 6:14:58 AM org.apache.catalina.startup.Catalina start
INFO | jvm 1 | 2009/08/06 06:14:58 | INFO: Server startup in 4531 ms
INFO | wrapper | 2009/08/06 07:10:02 | User logged out. Ignored.
INFO | wrapper | 2009/08/06 07:10:03 | User logged out. Ignored.
INFO | jvm 1 | 2009/08/06 07:10:04 | OpenLog: verbosity level = 2
INFO | jvm 1 | 2009/08/06 07:10:04 | bid.bootstrap.loglevel=info+
INFO | jvm 1 | 2009/08/06 07:10:04 | 06 Aug 2009 07:10:04,279 INFO - Closing application context [Root WebApplicationContext] [XmlWebApplicationContext:599]
INFO | jvm 1 | 2009/08/06 07:10:04 | 06 Aug 2009 07:10:04,279 INFO - Destroying singletons in {org.springframework.beans.factory.support.DefaultListableBeanFactory defining beans [acegiFilterChainProxy,httpSessionContextIntegrationFilter,securityRequestFilter,exceptionTranslationFilter,filterSecurityInterceptor,authenticationManager,daoAuthenticationProvider,userDetailsService,authenticationBean]; root of BeanFactory hierarchy} [DefaultListableBeanFactory:272]
INFO | jvm 1 | 2009/08/06 07:10:04 | 8-6-2009     7:10:04.279     Info     OpenKernel.Config     Disabled-1249557004060     Wrapper-Shutdown-Hook     com.plumtree.openkernel.impl.config.providers.ConfigXMLFileProvider     Loading config data from C:\bea\alui\configmgr\2.0\bin\../settings/config
INFO | jvm 1 | 2009/08/06 07:10:04 | OpenControls.winapaqlog4
INFO | jvm 1 | 2009/08/06 07:10:04 | INFO: PmbApplication.run() exiting forcefully... Releasing one worker thread.
INFO | jvm 1 | 2009/08/06 07:10:04 | 8-6-2009     7:10:04.810     Info     OpenKernel.Config     Disabled-1249557004060     Wrapper-Shutdown-Hook     com.plumtree.openkernel.impl.config.providers.ConfigXMLFileProvider     Setting subscription data.
INFO | jvm 1 | 2009/08/06 07:10:04 | container config context:EAS:configurator
INFO | jvm 1 | 2009/08/06 07:10:04 | OpenLog: Registered application name: ConfigInitialization (local machine only)
INFO | jvm 1 | 2009/08/06 07:10:04 | OpenLog: Configuration component contained no logging settings. Creating disabled log service.
STATUS | wrapper | 2009/08/06 07:10:06 | <-- Wrapper Stopped
============================================================================
When we are starting , it stays for couple of mins say 10/15 mins then it stops.
Can any body have any idea what should i do to get it resolved.

The logs look odd to say the least on start up and there are couple items when the service gets the signal to shutdown that are suspicious.
My suggestion is to troubleshoot top down. Clean up the discrepant messages upon startup.
message : INFO
Please verify that the file is readable by the current user
and that the file has not been corrupted in any way.
One common cause of this problem is running a 32-bit version
of the Wrapper with a 64-bit version of Java, or vica versa.
This is a 64-bit JVM.
Are you attempting change the existing out of box JVM?
You know it doesn't use sun jvm anymore. It's JROCKIT.
Make sure your JVM Settings are as follows:
C:\bea\alui\configmgr\2.0\settings\config\wrapper_base.conf
# Java Application
wrapper.java.command=%JRE_PATH%/bin/java
THEN Verify:
CMD
cd C:\bea\alui\common\jre\1.5.0_32\
java -versionYou should get something like.
java version "1.5.0_12"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.5.0_12-b04)
BEA JRockit(R) (build R27.4.0-90-89592-1.5.0_12-20070928-1715-windows-ia32, comp
iled mode)
In any case, your enviroment seems funky. Use the tips above to troubleshoot.
Troubleshoot this error first and find out why it thinks your using a 64 bit JVM versus a 32 bit one.
Last tip: Place Logging into Debug to see whether more logging will give you further insight into the problem.
Hope this helps!
Cheers!!!

Having trouble with creation of a cloud service with multiple virtual machines using java sdk.

I am creating a cloud service on azure with 2 virtual machines using java sdk API. Service created successfully.
My input endpoint details are as follows.
INPUT ENDPOINTS
Head : 191.238.144.47:2400
Head : 191.238.144.47:22
Node0 : 191.238.144.47:43211
For Head instance port 2400 is for HTTPS and port 22 is for SSH and for Node0 instance port 43211 is for SSH.
But I am having problem with doing a ssh on Head instance. Sometimes it works sometimes doesn't. Same problem with HTTPS also.
I have some application running over there but when i try to access it thru browser sometimes it works but most of the time doesn't. When I restart the instances from azure portal, its works after
that(not always but most of the time).
Now I am confused what is going on there. I am creating cloud service and virtual machines using java sdk and setting input endpoints also. After creation of all instances i restart every instance programmatically .
I am not sure whether restart is required or not. It must be something to do with input endpoints only but not able to get the right thing i guess. When i do the same thing thru azure portal(creation of cloud service with virtual machines and setting up input
end points) everything works fine but not achieving the result when implementing it by java sdk API. Please help me.

HI Nithin,
Thanks for your reply. I am setting the endpoints after creating my instances using update call. Here's the code snippet.
AzureService aServ = new AzureService(session);
if(aServ.checkNameAvailability(clusterName)) {
aServ.createHostedService(clusterName, "dbX cluster");
// Creating head instance
aServ.createHead(clusterName, imgName, headType, userName, pswd);
// Setting end points for head node
String name = "ssh";
int port = 22;
aServ.updateVMInputEndpoint(clusterName, "Head", name, port);
// Restarting head instance
aServ.restartVM(clusterName, "Head");
String roleName = "Node";
String tmpRoleName = "";
for(int i=0; i<noi; i++) {
port = 43210+(i+1);
tmpRoleName = roleName + i;
// Creating node instance
aServ.createVM(clusterName, tmpRoleName, imgName, nodeType, userName, pswd);
// Setting end points for node instance
aServ.updateVMInputEndpoint(clusterName, tmpRoleName, name, port);
// Restarting node instance
aServ.restartVM(clusterName, tmpRoleName);
// Method to update the input endpoint details
public void updateVMInputEndpoint(String clusterName, String vmName, String name, int port)
throws Exception {
VirtualMachineGetResponse resp = computeManagementClient.getVirtualMachinesOperations().
get(clusterName, clusterName, vmName);
VirtualMachineUpdateParameters updateParameters = new VirtualMachineUpdateParameters();
//get the configuration list
ArrayList<ConfigurationSet> configlist = resp.getConfigurationSets();
//get inputendpoint list and update it
ArrayList<InputEndpoint> endpointlist = configlist.get(0).getInputEndpoints();
InputEndpoint inputEndpoint = new InputEndpoint();
inputEndpoint.setEnableDirectServerReturn(false);
inputEndpoint.setPort(port);
inputEndpoint.setLocalPort(port);
inputEndpoint.setName(name);
inputEndpoint.setProtocol(InputEndpointTransportProtocol.TCP);
endpointlist.add(inputEndpoint);
// Open port for https on head node
if(vmName.equals("Head")) {
inputEndpoint = new InputEndpoint();
inputEndpoint.setEnableDirectServerReturn(false);
inputEndpoint.setPort(2400);
inputEndpoint.setLocalPort(2400);
inputEndpoint.setName("https");
inputEndpoint.setProtocol(InputEndpointTransportProtocol.TCP);
endpointlist.add(inputEndpoint);
updateParameters.setConfigurationSets(configlist);
//required for update
OSVirtualHardDisk osVirtualHardDisk = resp.getOSVirtualHardDisk();
updateParameters.setOSVirtualHardDisk(osVirtualHardDisk);
updateParameters.setRoleName(resp.getRoleName());
OperationResponse updtResp = computeManagementClient.getVirtualMachinesOperations().update(clusterName, clusterName, resp.getRoleName(), updateParameters);
And every time i am creating a new cloud service along with head and node instances. Region is "South Central US".
I am setting ProvisionGuestAgent field to true at instance creation time. Thank you.

Configuring Reporting services for SCCM 2012

Hi,
I just finish create SQL reporting services ( configure Database, report manager URL) in SQL 2008 R2 for SCCM 2012. When I open the Report option in SCCM console (Monitoring --> Report), no report listed there and then I try to add in Reporting service
point for it, but get an error message
"There is a problem connecting to the specific reporting server. Please check the connection and make sure SQL reporting service is running on the specified server"
I manually browse to http://sqlserver/reportserver or
http://sqlserver/reports , that is no any folder exist there (I assume when I configure reporting service it will automatic create a folder for it with all report inside?). Anyone can guide me on how to solve this issue?
Regards,

Hi,
hi ,
I am new to SCCM 2012 group and i have knowledge on sccm2007. i want to discuss some issue what i have with SCCM2012 installtion. The issue is my machine got rebooted while installing sccm 2012 SP1.i have already installed all the prerequisites for SCCM2012.i
am installing sccm2012 on Hyper-V machine.
Please see my system configuration below:
DomainController(2008R2 server) : 512MB RAM, AD things and DNS ,DHCP has installed on it.
System center server(2008R2) : 1028MB RAM , Sql 2008 server installed on it.
i tried to install it many times but still i got the same issue.
Could anybody please help me with this ?
This is a new question. So please ask this question on a new thread in this forum.
Thank you.
Best Regards,
Joyce Li
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Configuring NT service with disableWeblogicClassPath

Similar Messages

Maybe you are looking for