Ability to display multiple texts within graphic planning board Gantt chart

I have been unable to change the planning board Bar Chart Graphic Profile (OPG0 and OPG9) to be able to display both material text and a user field within the Gantt chart graphic. I have copied the SAPSFCG011 profile and created my own. The profile is displayed below from CMCH.
Overall prof: ZBWSFCG011           SFC: View work center/capacity (3 graf.)
...... Select.profile:                     ZBWSFCS001      SFC: View work center -> cap.(3 graf.)
...... Control profile:                    ZBW___C002      Gen: Planning table
...... Time prof:                           ZBW___Z002      Gen: Medium-term (3 months)
...... Evaluation prof.:                 ZBW___A001      Gen: Standard evaluation profile
...... Strategy prof.:                    ZBW___T001      Finite scheduling forw./all functs.activ
...... Capacity planning table:      ZBWSFCL010      SFC: only main cap. (3 graf.)
.......... Graphics profile                      ZBW___X002      BARC    1 Default profile 2 Capa. planning board
.......... Chart sequence                      ZBWSFCT002      SFC: Main caps. (3 graph.)
.......... Layout ID                                 ZBWSFCLA10      SFC: Work center view     (graphical)
.......... LineRepresSelection                 ZBW___ZR02      SAP standard 2
.......... Scale time axis                         SAP___M031      Stand. weekly per. split rough
.......... Graph.object.select.                ZBW___OA02      Pool group order path
.............. DStat Sq Structur Field na ROp Comparison val NStat Struct
.............. 00000 01 KBED     TYPKZ    NE 1                      00001
.............. 00000 02 AFVG     OBJNR    ST SAP005         00000 SAP002 Standard operation partially confirmed
.............. 00000 03 AFVG     OBJNR    ST SAP006         00000 SAP003 Standard operation completely confirmed
.............. 00000 99                   DEF                                  00000 ZJB000 Standard operation
................... Graphical object type               ZJB000          Standard operation
........................ Form type                           22              Plan. board:Graphic obj. w. ordNo matTxt
........................... Form group                          ZBW001
............................... Form definition                     PLTO22          Planning board graphic order and mat.txt
.................................. Layout definition                   [[$a//$b]]
.................................. Layout definition
.................................. Layout definition
.................................. Layout definition
In addition to the profile change, I have configured the graphical object type ZJB000 (in OPG9) to look as follows:
0     AFKO     Order header                          MATXT     Material description
2     KBED     Capacity requirements     A     SSTAD     Latest start / date     SSTAU     Latest start / time
3     KBED     Capacity requirements     A     SSSBD     Latest scheduled start: Processing (date)     SSSBZ     Latest scheduled start: Processing (time)
4     KBED     Capacity requirements     A     SSSAD     Latest scheduled start: Teardown (date)     SSSAZ     Latest scheduled start: Teardown (time)
5     KBED     Capacity requirements     A     SENDD     Latest finish / date     SENDU     Latest finish / time
6       AFVG    Order operation                       USR08    User field for date
I have found that the 2nd text field (USR08) must be added as the last step (#6). When I had it as #1, the planning board did not display the USR08 value.
Now both are displayed in the Gantt chart graphic. However, it is difficult to see this long string of data as the bars in the Gantt chart may not be long enough to display the data.
Therefore we would like to use the "hover over" text which is displayed in the status line at the bottom of the screen. We have tried using both the Info Text and the Quick Info options within the Bar Chart: Options Profile (OPG0). Only the first text (the material descirption) is dislayed within either the Quick Info or the Info Text.
Is it possible to have multiple object values appear in Quick Info or Info Text? Or is it possible to control which text is displayed in the Quick Info or Info Text?
Any help in this area would be greatly appreciated, as this is a make-or-break issue for the business to use the planning board. Thank you!

I'm also looking for a standard customizing alternative to do the same thing.
Still, if you're interested, I've already done it successfully with user exit PLAT0001.
Hope this helps.
Best regards.

Similar Messages

Network Header at the Project Planning Board gantt chart

Hi again,
Does anyone knows a configuration to allow the network header to appear in the project planning board gantt chart?
Tks
James

Try transaction OPT7
Double click on the appropriate Profile
On the Table Area Tab, select the flag for the field "Display Network"
Hope this helps
Regards
Steve

Display Multiple Text Entries

HI, i am very new to Abode authoware 7......infact i just have the demo version so far...and intend to buy it if i find authoware useful....
well i have a project to take feedback from customers, though for now all i need is to display multiple text boxes, they don't need to do anything.
How do i display multiple text entries on screen at the same time? I repeat, they need not do anything.

Hi there
If you are actually using Authorware, you are in the wrong forum. This forum is for Adobe Captivate.
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

Displaying multiple text

hi to all
how to display multiple text in only one text item or anything .
example:
when i type lke this:
*balloon
*cake
*cap
*cup
in one text item or any item.
then it will display to other forms like that
*balloon
*cake
*cap
*cup
is this possible to do?to update?to insert in database?
mica

yes
i have two blocks
blockA where i create my records [ A ] text item#1
blockB where i can view my records [ A ] text item#2
if a create in A.. then when i goto blockB the data that i created appears in text item#2
mica

Incoming mail won't wont display rich text or graphics

. Before updating my Intel iMac to Leopard, none of my incoming mail displayed the text or graphic that it was used to compose the mail i.e everything is in plain text . I took the computer to local Apple store and paid for 2 hours of the tech's time and he could not find the source of the problem. After upgrading to Leopard, it did improve a bit with some mail displaying the graphics and rich text but now it is happening again.
I have been into Mail preferences and ticked the box "display remote images in HTML messages " . There is nothing in troubleshooting to help and it is getting annoying. I also have a 13" Macbook but it does not have the same problem as the rich text and graphics come through as sent. Hope someone can help.

try this link
http://support.apple.com/kb/TS2537

Cannot display the text in Hyp Planning via ODI

Hi,
has anyone follow the tutorial from John Goodwin here:
"http://john-goodwin.blogspot.com/2008/10/odi-getting-text-data-into-planning.html" ??
I'd tried the tutorial in order to able to display text in Planning.
However, I still cannot display the text in the end, only the numeric id values - taken from the HSP_TEXT_CELL_VALUE table.
Here the steps I've done:
- getting the list of id and text values to be inserted into HSP_TEXT_CELL_VALUE table
- make a new interface to load data into planning
- I want to load data from flat file to Planning, so I dragged flat file and also the HSP_TEXT_CELL_VALUE table into the source column, and then join the "MP3" column from flat file with values column from HSP_TEXT_CELL_VALUE table (like written in the tutorial ""http://john-goodwin.blogspot.com/2008/10/odi-getting-text-data-into-planning.html")
- after that, I dragged the Account dimension, and then join them. For the MP3 column in target column, I mapped it with "id" column from HSP_TEXT_CELL_VALUE table.
- Then I execute. The data loaded into Planning, but when I tried to open in report, the MP3 column shows the "id" instead of "values".
Am I missing something?
Has anyone experienced the same as mine?
Any help would be appreciated.
Thanks

Hi,
I may have followed the blog :)
First have you loaded the values into the HSP_TEXT_CELL_VALUE table, have you checked the values are now in the table ?
Also, you will unfortunately have to restart the planning service after you have loaded them as the table is cached and a restart clears the cache.
When you load into planning you need to map the "Value" field in HSP_TEXT_CELL_VALUE to your data source, and load in the id to planning.
If you are only getting numerical values it is either because you have not restarted planning or the HSP_TEXT_CELL_VALUE has not been updated correctly.
Cheers
John
http://john-goodwin.blogspot.com/

Multiple materials input to planning board

Hi,
does anyone know if there is a way to specify multiple materials ( for instance thru copy/paste ) in the planning board MF52???
Any help appreciated !
danny

Hi Danny,
I don't think there is, but as you see, you could create a product group for these materials, and use it to access the planning table.
Regards,
Mario

PAM - Maint. Planning not creating Reservation in Graphical Planning Board

Hi All,
I am implementing Pool Asset Management for the booking in and out of plant.
Everything seems to be working well apart for the maintenance part. In the SAP Documentation [Repair Measures|http://help.sap.com/erp2005_ehp_04/helpdata/en/0b/5ad2c9e2f249abad4df1479243a001/frameset.htm] it states that a reservation is automatically created for the asset in question for the period it is in the workshop.
I have found no other guidance other than what is in the above link. So far I have tried the following:
Maintenance Plan creating M1 Notification for the relevant asset. Does not appear on the Planning Board.
Maintenance Plan creating a Demand with no PAM details. Doesn't show up on the Planning Board.
Maintenance Plan creating a Demand with PAM details including the specific PAM Pool. A demand is held in the Planning board but requires manual intervention.
I have searched hi and low but still haven't found any answers for getting the Maintenance Planning of Assets appearing in the Planning Board.
Any Help would be much appreciated.
Thanks,
Dean

Hi All,
I have now found a solution to the issue I posted below.
It is simply a case of setting a maintenance notification in the IMG Edit Object Processing and setting it as Direct Entry.
Thanks to Udo Schumacher for the [solution|Re: Maintenance schedule not visible in PAM03 Planning table].
Dean

Display of Assigned Resource Units or % in Gantt chart

Is there a way in P6 to show how many of a particular resource is assigned to a task in the Gantt chart view/layout? For example, a task may have (7) laborers, (2) electricians, (1) operating engineer, and (1) concrete pump truck assigned. The "Resources" column in the Gantt view only shows laborer, electrician, operating engineer, concrete pump truck. It does not show how many of each are needed.

Go for the workaround.
Create a text User Defined Field (UDF).
Add the numbers in UDF exactly in order of resources view in Gantt Chart.
Add the UDF as bar label next to Resources label.
Jawad
Novo Rail, Sydney

Advice? Displaying multiple text streams

I've got a file format that contains up to 2 essentially independent styled text streams. I would like to display each stream in a visually independent text view (i.e. if 2 text streams, then 2 panes with scroll bars) and allow changes to be saved back to this single file in the same format.
I'm wondering what the best way to accomplish this is with the Swing text system? I've studied the Swing text documentation and I have two radically different ideas on how to go about this, but I was wondering if anyone else has better ideas than I.
Anyone?

Can you share your two ideas ?Sure.
First, Swing text using JTextPane uses a model/view/controller paradigm. The controller, EditorKit, seems to be responsible both for initializing the model (Document) from the persistent storage (a file), and indirectly for setting up view objects in the JTextPane. One idea was to subclass EditorKit with something that knows how to read my file type. I may also need a custom StyledDocument subclass that knows about the 2 parts. I may also need a custom ViewFactory and some custom Views. This approach boils down to: I need to learn the Swing text system a whole lot better before even trying.
The other approach is to say, ok, EditorKit will not do the reading and writing of the file. Instead I'll invent a class that can do that. This class would read each section into its own StyledDocument. Then I would have 2 JTextPane's, and attach these new initialized StyledDocuments to the respective JTextPanes. Alternatively, I could get the existing StyledDocument from the JTextPanes and my as-yet-non-existent class could read the sections into those StyledDocuments. This bypasses the i/o part of the EditorKit and lets it do whatever else it does--hopefully having the Document initialized by something other than the EditorKit itself would not be a problem.
Those are the two approaches I had so far thought of.

Scheduling comparision in Gantt Chart- Project planning board

Hi All,
I Need to use the "Scheduling comparision" in Project planning board gantt chart. This is to compare the original status of activities before and after scheduling.
But the "Scheduling comparision" button in the PPB does'nt seem to work.
( I am selecting the activity and then pressing the button for"display original status" )
How do I use this functionality?
Thanks in advance.

Hi Potluri Srinivas ,
After some tests, I still donot get, how does this functionalties work either.
I assume, it is linked with the setting in 'option' -> 'planning board' -> 'diagramm area' -> 'orginal schedule'. But I donot know, how the two things linked directly.
If you find it out, please post it.
Thanks and regards,
Zhenbo

Activity Confirmation - Gantt Chart - Planning board

Hi
suppose i have a activity duration from 1st february 2009 to 28th february 2009
on 15th february i confirm 0nly 10% of the work as completed in the activity confirmation screen in the degree of processing field and also enter the start date as 1st february 2009 and the finish date as 15th february 2009.
when we look at the planning board in CJ20n transaction subsequently (gantt chart) the activity bar shows a colouring from 1st february to 15th february instead of showing only 10% of the activity bar coloured for completion of the work
where is it possible to see the percentage completion of an activity graphically as 10% this data is available in table format in CN48N transactio

Hi,
we can view in table format by selecting the fileds related to percentage of completion in the project planning board (gantt chart).
The requirement you had explore is possible in MS projects, but in standard SAP we can't view in the graphically mode.
Regards,

Multiple text selections

Having made the transition from Word to ID CS4, one of the things I miss most is the ability to select multiple text instances (by holding down Ctrl as you select them with the mouse).
Or is this possible in ID CS4 via an alternative route?

Are you telling me it may be time to upgrade my copy of Word?
Actually, I think you're being mislead somewhat.
Let's be clear:
In Word 2003 and 2007, you can "mouse-select" text within multiple text boxes, (holding down Ctrl).
In Word as far back as I can remember, (and I'm not young), you could always hold down Alt while drag-selecting to make a vertical selection, (described earlier in this thread as selecting bullet characters only). Very handy when cleaning up someone else's tab disaster.
In Word, you CANNOT select dis-contiguous text that all resides on the same open page. At least I have yet to do it.
In ID, you indeed CAN Pick-Tool select multiple text frames and apply a single paragraph style to all.

In Pages, How to duplicate a design (multiple text boxes

In Pages, How to duplicate a design (multiple text boxes & graphics) which is on the top half of the page, onto the bottom half? I appreciate anybody's suggestion!
Alan

Hi alanhome,
Not trying to be cheeky, but a copy and paste doesn't work?
Cheers,
GB

Display uneditable text problem

How to display uneditable text within a border without showing a cursor?
Thank you!

Have you tried using a StringItem? It's like a TextField, but then its contents is uneditable. Should work I guess. You can configure an lcdui.Item with appearance mode. Item.BUTTON can be used for visualising the lcdui.Item object -- in this case a StringItem -- like a genuine (but non-clickable) button. Try it and decide whether it solves your problem.
Good luck!
Cheers,
Jasper

Ability to display multiple texts within graphic planning board Gantt chart

Similar Messages

Maybe you are looking for