Configuring the sound on my tascam interphase

Im new to the apple community and I’ve upgraded my studio monitors to jbl playing through my tascam interphase. iTunes play but nothing on safari. all videos pause after .5secs. can somebody help i can’t enjoy my christmas gift ?

Hi there wilson jacksonwill,
You may find the troubleshooting steps in the article below helpful.
iPhone: No sound or distorted sound from speaker
http://support.apple.com/kb/ts5180
-Griff W.

Similar Messages

How must be configured the sound in KDE?

Hello
I have installed alsa and pulseaudio and configure . In gnome 3 the sound work perfect. But in KDE not, have installed phonon-gstreamer and somedays work fine other not, and i have to select in VLC to use the alsa output, I don't have individual sound control for apps, some days yes.
And always get a message about "Falling back to default" on start. That troubles i have since the 2012 or even 2009
Last edited by felipe (2013-07-07 16:36:45)

This is related to randomly switching "places" of detected sound devices. If you want to have sound on the same device, after reboot, after suspend, in KDE, you have to create sound config file, place it in /etc/modprobe.d/
See this:
cat alsa-base.conf
options snd slots=snd_hda_intel,snd_SB-XFI
options snd_hda_intel index=0
options snd_SB_XFi index=1
#options snd_SB_XFI index=2
#options snd_ctxfi index=2
If i had not created it, than on every reboot, every suspend and wake it up, my cards would switches places and i would not have sound. In this config, my primary card is intel sound card (as a matter of fact this is only the driver for it, the sound card in fact is VIA integrated chipset operating on intel drive) and XFI that has "1' passed to config. What it means? Use as a secod device.
BTW -
options snd slots=
is new order of setting devices here, old one is this:
options snd_hda_intel index=xxxx
Last edited by firekage (2013-07-08 17:51:51)

Is there a list of the sound-generating System events for OS X? How to tweak?

I work with a community with some minor physical and visual impairments. I have limited current OS X experience, and I am volunteering on their behalf. But this question is not directly about OS X assistive technologies. Right now, we would just like to add more+additional sound effects than seems to be the default for OS 10.8.
In particular we would like:
A loud sound when a USB device has become unplugged (when plugged in would be nice as well.)
A clear sound when a password has been entered incorrectly.
One of my users swears these sound events are already in there, and I am inclined to believe her. But confirming this is difficult on Mac OS 10.8.4 The “Sound Effects” dialog in the System Preferences only seems to be for alerts.
So two questions:
What are all the system sound events in OS 10.8.4
How can we configure the sounds that are played for individual events?
Thank you!

Growl.info and HardwareGrowler can play sounds when hardware in attached/removed.
Unplugged can tell you if your laptop power adaptor has been plugged in or unplugged.

My movies and music videos won't show up on screen, I can hear the sound but not see the video how do I fix this?

My movies and music videos won't show up on my computer screen, I can hear the sound but not see the video how do I fix this? I'm not sure what to do as far as turning my purchased movie into DVD goes either. I just want to put the movie onto a DVD disc but my itunes won't even show that I have a blank disc in the drive, I'm not sure what is wrong or how to fix this, any help at all would be much appreciated.

Hi @anthony7722 ,
Thank you for your query, I will do my best to help!
I grasp that you uninstalled the Intel graphic driver and the catalyst control. You reinstalled the Intel driver and now you can view and hear videos on the Internet but you are unable to set the resolution as high as previously.
When I checked the specifications for your notebook I see that you have switchable graphics.
Here are two links that I believe will help.
Overview of Switchable Graphics or Dual GPUs
Switchable Graphics on Notebooks Configured with Intel and ATI GPUs
Here is a link to HP Pavilion dv7-6150eb Entertainment Notebook PC Drivers
Please try this process.
1. Download the chipset driver, and both graphic drivers and save them but do not install them yet
2, Delete the chipset driver and install the updated one.
3. restart your notebook
4.Delete the Intel driver and install the updated one
5. restart your notebook
6. Delete the AMD driver and install the updated driver.
You should now have a Catalyst Control Center.
This should now allow you to use the higher graphic card which should support the higher resolution.
I hope this helped.
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

I carnt hear my message tone,the sounds it makes when the phone locks and opens.Also i am unable to hear my music playing from my phone but my alarm and ringtone are working.Can anyone help

i carnt hear my message tone,the sound it makes when the phone locks and opens,also i am unable to hear music when playing from my phone but my ringtone and alarm tone work.Ive made sure the silent button is not on,and the volume button on the side of the phone is just showing it blank instead of it going up and down.To try and fix this i have reset my settings and restored my phone,but now its just skipping the music i have purchased from itunes when in a docking station which is now another problem i have as well.Can anyone help????

Hello dbrookes,
Thank you for using Apple Support Communities!
It sounds like even though the Mute switch is not on, sounds are not making the, well, sound they should, and the volume buttons make a blank volume indicator appear on the screen that does not show the volume level.
I wanted to recommend a couple of things.
First, I would reset the phone:
Resetting your device
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
From: iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
http://support.apple.com/kb/ht1430
If that does not resolve the issue, then you may want to try backing up to iTunes, and restoring the iPhone again but this time do not restore the backup and set it up as new to see if the issue persists without the previous configuration.
Just incase you need it, this article will help with that:
iOS: How to back up and restore your content
http://support.apple.com/kb/HT1766
Cheers,
Sterling

Hello, I just bought a 2013 Mac mini and I cannot get the sound to output to my Dell U2713HM monitor. I went to sound output but even though my Dell shows up there when I select it there is no sound output to it. I am using a mini DP to DP cable...

Hello, I just bought a 2013 Mac mini and I cannot get the sound to output to my Dell U2713HM monitor. I went to sound output but even though my Dell shows up there when I select it there is no sound output to it. I am using a mini DP to DP cable...Any ideas? Thanks

Hi Alxx911, and John Hammer1. After reading John's reply - " You can plug something into it's headphone jack. though" . I thought i'd try out of curiosity. I plugged in some headphones. I didn't expect anything to happen and nothing happened. The audio jack is for the Dell soundbar which is optional.
Here's a direct copy and paste from the users manual: Section About Your Monitor.
Attaching the Soundbar AX510 / AX510PA (Optional) CAUTION: Do not use with any device other than the Dell Soundbar. NOTE: The Soundbar power connector (+12 V DC output) is for the optional Dell Soundbar AX510/AX510PAonly. To attach the Soundbar: 1. Working from the back of the monitor, attach the Soundbar by aligning the two slots with the two tabs along the bottom of the monitor. 2. Slide the Soundbar to the left until it snaps into place. 3. Connectthe Soundbar with the DC power connector. 4. Insert the mini stereo plug from the back of the Soundbar into the computerís audio output jack. For HDMI/DP, you can insert the mini stereo plug into the monitorís audio output port. If there is no sound, check your PC if the Audio output is configured to HDMI/DP output.
This monitor has no speakers. (Like John Hammer1 mentioned). The no speakers feature was one of the reasons I chose this monitor.
Good Luck !

Please help me make the sound of my PC normal?

I need to know how to check the sound configuration on my pc, adjust it so that it is normal again and not sounding like I am in a tunnel or concert hall, and that's all. Is this so difficult for the Robohelp or powers that be?

Hi there
Ummm, are you sure you are posting in the right place? I'm not sure what RoboHelp has to do with the sound of your PC.
Cheers... Rick

Does anyone know how to access the sound software on a Mid 2010 Mac Pro? I have a Logitech Z906 5.1 surround system with fiber optic in and out, I only seem to be able to get stereo and simulated 5.1 sound .

A mid 2010 Mac Pro, trying to get 5.1 surround out of the onboard sound software using fiber optic out connected to a Logitech Z906 5.1 speaker sys. with fiber optic in and out, all I get is stereo and simulated 5.1 sound out of the speakers. In utilities, Audio Midi Setup I can't get the Mac to see the Logitech speakers for 5.1 speaker configuration. Without being made to feel like a dummy, does anyone have a solution? Thanks, Carl

Hello John, I figured it was a signal issue. All the speakers fire and the sound is great. I was running the speakers thru a Dell PC with a Creative X-Fi Elite Pro, THX Certified, 7.1 soundcard using a fiber optic from the Mac Pro to the Z906's, it worked great until the Dell died!!! When I bought the soundcard from Creative I also bought the GigaWorks S750, THX Certified, 700 watt, 7.1 speaker system, used the speakers for 11 years and then the woofer/amp said "I QUIT" Creative quit making the speaker system and the sound card. The satellite speakers from the Creative GigaWorks speaker system still sound great (rated at 78 watt each) and are a little better speaker than the one's that came with the Z906 and the wattage from the 906 is sufficient to drive the satellites without any distortion. Thank you for addressing my issue, you confirmed what I suspected all along, just needed to hear it from someone with the same setup.
One last question, I purchased a Diamond Multimedia USB Soundcard, can't use the fiber optic(not supported by Mac) but the green, tan and black RCA's plug in and produces adequetly. When you plug your 906's into the Mac Pro using the fiber optic how do you set your speaker configuration? When I plug into the mac pro with fiber optic the 'Audio Midi Setup' does not seem to see the 5.1 configuration. Any thoughts there?
Carl

Cant configure the node of my Integration Gateway

So I've been trying to get web services exposed from my test PeopleSoft Installation so that they can be used by another PeopleSoft Installation. After some reading and searching I found that I have to configure the Integration Broker in order to do that. From there I've been trying for a while now (unsuccessfully as you can imagine) to configure the Integration Gateway of my PeopleTools installation. Right now I can ping my Integration Gateway which comes back with...
PeopleSoft Integration Gateway
PeopleSoft Listening Connector
Tools Version : 8.53
Status:ACTIVE
and from there I can load the connectors, of which there are 11 different ones. After that I go to "Gateway Setup Properties", log in, and from there I have everything filled out with the following...
Gateway Default App. Server_
App Server URL: <the machinename>:<the port#>
User ID: PS
Password: <the password>
Tools Release: 8.53
Domain Password: <none>
Virtual Server Node: <none>
PeopleSoft Nodes_
Node Name: PSFT_HR
App Server URL: <the machinename>:<the port#>
User ID: PS
Password: <the password>
Tools Release: 8.53
Domain Password: <none>
After that, I try to ping the node but it always errors with the following and I have no idea why...
PeopleSoftTargetConnector - The appserver may be down. Check Appserver URL or Domain Password.
The problem is that I know I have the right URL and that the AppServer is running because I can see it's status in Command Prompt after running PSADMIN.EXE and navigating to the status of the server (not to mention I'm able to log into it). I've also looked at the "Configuration Status" in "Main Menu > PeopleTools > Integration Broker > Integration Network" and got checks on "Gateway Configured" and "Domain Active" but there's an X next to "Node Network Not Configured" which I'm not sure why it's there so if somebody could explain that to me, that'd be really helpful.
So from "Node Network", I can see all the nodes and can see the node that I'm trying to use for the Integration Gateway, "PSFT_HR", that has checks in the boxes under everything except "Remote Gateway Node". After I click on the PSFT_HR node I can see the "Node Definitions" tab that has the Authentication set to "Password", the password set to what I'm entering with the "Gateway Setup Properties", the "Default User ID" set to "PS" and everything after that (Hub Node, Master Node, etc.) is blank. The check-boxes next to "Default Local Node", "Local Node", "Active Node", and "Segment Aware" are checked.
In the "Connectors" tab I've tried pinging the node but came up with the same error from before. Also, towards the bottom there's a line that says "This connector does not have properties. Use Gateways Page to setup." where I log in to the "Gateway Setup Properties" again, the same info is used from before, and pinging the node gives the same error. As for the other tabs "Portal", "WS Security", and "Routings" I haven't done anything with them as I never read anything that said I needed too.
Also, as a side note, every time I try to ping the node the application stops responding even after I click cancel or try to click the "x" on the window. I cant do anything until it times out and gives me the error so if somebody could tell me how to change that or stop it from happening, that'd also be really helpful in saving time with troubleshooting this issue
I hope this wasn't too long with TOO MUCH information (or quotation marks) but I thought I'd get everything I've got right now out the way since I've tried a lot of different things and may get some suggestions that I've already found/tried up until now. I feel like it's something small that I'm missing (because that's always the case) so hopefully one of you can remedy my situation.
Thanks a lot for any help/suggestions (even if I've tried them, but I'll try them again in case something changes because computers work that way :/ ).
Edited by: 1006417 on May 17, 2013 10:59 AM
Fixed the typos with "machinename:port#" to fit the overall naming convention I used.

Since you didn't provide the "machinename" I'm wondering if that's your problem... you mention hanging while pinging... that sounds like name lookup or port connectivity problems, as if the gateway is waiting for something to time out in that arena. For communicating to yourself, depending on your config, that setting should match exactly whats in the <PS_HOME/PS_CFG_HOME>/webserv/peoplesoft/applications/peoplesoft/PORTAL.war/WEB-INF/psftdocs/ps/configuration.properties psserver line. Now if you created a domain just for PUBSUB it would need to match the jolt port for that domain (not the WSL). Since your logging in online already, we know the configuration.properties file has a good value, if your trying a different domain, I'd try switching back to using your domain for servicing online requests and try again.
I recommend looking at Nicolas's write up on this topic, it's very detailed.
http://gasparotto.blogspot.com/2013/05/integration-network-workcenter-853.html you may need to reference his 8.52 version for some pre-reqs as well but the link is in the 8.53 one. Also look for answers in the log file <PS_HOME/PS_CFG_HOME>/webserv/peoplesoft/applications/peoplesoft/PSIGW.war/errorLog.html (if you took default weblogic domain name). I just went through this process on a fresh demo 8.53 demo install and was able to start pinging the node after only a few steps. they were,
1. define the gateway
2. load the connectors
3. define the default and additional node
4. verified the PS user was able to logon (originally the password was expired)
5. set the auth type to Password for the node I was using.
6. success on ping, interestingly enough I didn't even have PUBSUB processes running yet, node network and active domain both show not configured at this time
On your node network not getting the green check, look on the Node Network status page just below the title, there is a check box for Secure Keystore Value Defined. Is that checked? If not it needs to be. You probably need to set the secureFileKeystorePassword to your keystore password. The default is still password, you can change this from the Advanced Properties Page link of the Gateway Setup Properties page. Use the encryption tool because the password can't be clear text, it has to be saved encrypted to work. Then go back to the node network page and see if it's cleared up. I mentioned this briefly in a write I did on Unified Navigation http://remotepsadmins.com/2013/03/04/peoplesoft-unified-navigation-with-peoplesoft-applicatations-portal-interaction-hub. Nicolas's 8.52 write up has screenshots and such though he does it prior to showing that it will prevent configuration from passing. I've also seen in properly configured systems you may need to just save this page without changes to populate some data, but that was on upgrading to 8.52, i would expect 8.53 would not need that.
continuing on, I did exactly what I just mentioned, and I've got a configured node network.
i just bounced the domain, adding the PUB/SUB servers, and activating them on the Domain Status page. I've now got green lights across the board and I can still ping successfully. I used no domain password, but I also verified that none was set in the psappsrv.cfg file. I just hit the Network Integration Status button on my system and got the Status check successful message.
Let us know how it goes.
Edited by: RCC on May 17, 2013 1:13 AM
Fixed a typo and changed a sentence to make it more clear

Problem with the sound?

First of all, ENGLISH ISNT MY PRIMARY LANGUAGE, SORRY FOR THE SPELLING MISTAKES:
Hi, i bougth my mac a couple of days ago and it works just perfect.
I had a little problem with the audio and i want to know if its normal or i should be worried about it.
I was watching a episode of a serie and the audio works fine. Then I started to watch another episode and i wasn't hearing anything. The volume was almost on max. i though it was a problem with the webpage but when i went to youtube the audio wasn't working either. i closed google chrome and opened it again, the sound works fine again. But still there was a problem, the little noise that the Mac make when you change the volume wasn't working, in system preference the box "Play Feedback When Volume is Changed" was checked, it just stop working suddenly. I restarted my Mac and now everything is perfect.
im a little worried right know cause ive been using this mac for two days, i think this isnt supossed to happen. i didnt change any configuration before this happened. If this is in a couple of days, whats going to happen in a couple of months or years?
Thanks

i bougth my mac a couple of days ago
Call Apple Care. You have 14 days from the date of purchase to return your computer with no questions asked.
Take FULL advantage of your warranty. Posting on a message board should be done as a last resort and if you are out of warranty or Apple Care has expired.

? How can I get and keep the sound on my ipad?

I keep losing the sound on my ipad. Help.

Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
Check your settings. The iPads have a small switch on the right edge. It can be used as a rotation lock to keep the screen from automatically reorienting itself as you move around, but you need to have the tablet’s settings configured properly. That same switch, right above the volume buttons, can also be set to function instead as a mute button to silence certain types of audio.
If the switch is set to work as a mute button, you can change its purpose to “screen-rotation lock” by tapping the Settings icon on the home screen. On the Settings screen, tap General on the left side, and on the right side of the screen flick down to “Use Side Switch to.” Tap to select Lock Rotation or Mute to set the button’s function. Even if you set the side switch for your preferred use, you can still mute the Mini or lock the screen. Just double-click the Home button, and when the panel of apps appears along the bottom edge of the screen, flick the row from left to right with your finger. Tap the icon on the far left side of the row to either lock the iPad’s screen or mute the iPad’s alerts, notifications and sound effects. Music, podcasts and video are not muted unless you turn the volume all the way down.
iPhone: Can't hear through the receiver or speakers
http://support.apple.com/kb/ts1630
http://www.atreks.com/app-no-sound-on-ipad-4-%E2%80%93-what-to-do/
To solve some sound problems, just follow these simple steps
1. Go to Settings
2. Tap on General
3. Tap on Reset
4. Tap on Reset All Settings
 Cheers, Tom

When testing speakers form the Sound mixer....no center channel so

I have a Sound Blaster Audigy MP3+ sound card, everything has been find up till now. When I test the speakers in the 5. configuration from the sound mixer the voice gives me sound out of each speaker except the center channel. I have updated the drivers etc.
I can hear sound through the center speaker but not during the test?
Any ideas?

this might help or maybe not.
has your sub got a setting for direct mode. if you have set it to direct, then check your setting in organizer/player.
eax, mixer, speaker settings.
john

Why not my laptop can't to pronounce the sound,but flash player can?

why not my laptop can't to pronounce the sound,but flash player can?
my app VLC can't make sound,but firefox by flash player can make sound ~~
sorry my english not wil *_*!
#lsmod | grep "snd_.*" [0]
snd_hda_codec_hdmi 24487 1
snd_hda_codec_conexant 47158 1
snd_hda_intel 26180 0
snd_hda_codec 98033 3 snd_hda_codec_hdmi,snd_hda_codec_conexant,snd_hda_intel
snd_hwdep 6300 1 snd_hda_codec
snd_pcm 75167 3 snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel
snd_page_alloc 7217 2 snd_pcm,snd_hda_intel
snd_timer 18934 1 snd_pcm
snd 59989 7 snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_hda_codec_conexant,snd_pcm,snd_hda_codec,snd_hda_intel
#alsamixer [0]
cannot open mixer: 无效的参数

VLC plugs directly into pulseaudio, while the firefox flash plugin uses ALSA to play sound. Do you have the pulseaudio-alsa package installed?
I have had a similar problem before. Sound would occasionally be controlled by ALSA and occasionally be controlled by pulse (the pulseaudio-alsa package did nothing). As far as symptoms, sometimes other applications would not produce sound while a flash video was playing and vice versa. Ultimately, I just removed everything pulse/ALSA-related, deleted (and backed up) my configuration files, and installed all related packages anew. It works now. I still don't really know what the problem was.

Configure the ADMIN and CLUSTER service connections to be SSL

Can you configure the ADMIN and CLUSTER service connections to be SSL
rather than tcp?
I was wondering about the present or future ability to secure other
connection services with SSL. Can you now or are there future plans
to configure the ADMIN and CLUSTER service connections to be SSL
rather than tcp? I suppose I should add the PORTMAPPER to that list.
My primary interest is for an SSLCLUSTER service in the case where
two brokers are connected over a non-trusted network. It may
not be too difficult to secure all the services the same way, but
perhaps that is on the TODO list.
A related question is if there are plans to add SSL with client
authentication as a stronger authentication mechanism than 'simple'
username and password. I believe you could get the username from
the client certificate's DN and continue to use the same LDAP user
repository for access control. I think this is similar to the way
that BEA's Weblogic server does it.
Finally should it be possible to deploy the HTTP tunnel servlet to
a webserver (such as iPlanet Web Server) configured to do SSL with
client authentication as a work-around to get stronger authentication
with the current release of the product? Or am I perhaps missing some
obvious and important detail? :) I guess I would like to know it's been
done already or is at least possible before I try and do it myself.

3 scenarios involving SSL are:
1: JMS client <------- SSL -------> iMQ broker
2: iMQ admin <------- SSL -------> iMQ broker
3: iMQ broker <------- SSL -------> iMQ broker (i.e clusters)
(1) is currently supported in iMQ 2.0
(2) and (3) is not supported in iMQ 2.0. No concrete plans yet to support
it in the near future but we'll definitely consider doing it if we
hear a lot of demand for it.
]A related question is if there are plans to add SSL with client
]authentication as a stronger authentication mechanism than 'simple'
]username and password. I believe you could get the username from
]the client certificate's DN and continue to use the same LDAP user
]repository for access control. I think this is similar to the way
]that BEA's Weblogic server does it.
This is on our todo list, but due to other more pressing issues we
have not been able to address it. We will continue to keep it
on our potential list of new features.
Sorry if I sound pretty wishy-washy in my responses above, but the fact
is that the things you mentioned above had to take a backseat
to other more critical features. That and the usual time/resource
constraints caused them not to be implemented.
]Finally should it be possible to deploy the HTTP tunnel servlet to
]a webserver (such as iPlanet Web Server) configured to do SSL with
]client authentication as a work-around to get stronger authentication
]with the current release of the product? Or am I perhaps missing some
]obvious and important detail? :) I guess I would like to know it's been
]done already or is at least possible before I try and do it myself.
Yes, this should be possible (although I don't believe we've tried it here).
The client authentication here is really only between the JMS client and the
web server (not between the tunnel servlet and the iMQ broker) and should
be similar in setup to any other java application talking to iPlanet Web
Server.

How do I turn off the sound on ads which are on autoplay?

There are ads on webpages that start playing sound for no reason at all and there appears to be no way to stop these sounds. So, I am forced to mute my computer until the ad stops playing which can be minutes or hours or until I find the webpage that is playing the sound. In IE, there is a way to turn off sound from webpages but I haven't found that in Firefox yet. Perhaps this is something you can fix.

Try these about:config settings
:media.autoplay.enabled user set boolean False
:browser.sessionstore.max_concurrent_tabs user set integer 0
I notice that the second one for me is 3 (default), don't know if I changed it or or if Firefox did.
'''More information on configuration variables''' available in
[http://kb.mozillazine.org/About:config_entries about:config (entries)] and for users not familiar with the process there is [http://kb.mozillazine.org/About:config about:config (How to change)] -- Specialized list of only [http://dmcritchie.mvps.org/firefox/tabs_config.htm Tabs configuration] variables.

Configuring the sound on my tascam interphase

Similar Messages

Maybe you are looking for