Consolidation of Purchase Requisitions

Dear friends,
In MRP run based on the reorder point and max.stock level,PRs will be created .
One PR will be created for each material. Here One PR for one material will be created.
Instead of that any provision is there in SAP, based on which Single Purchase Requisition will be created
for group of materials instead of PR for single material.
Regards,
Canand

Hi,
---Doubt 1: If same material is existing in different PRs, same material is copying in different line items instead of consolidating on same line item.
keep seperate RFQ/PO line item for seperate PR line item i.e. 1-1 for PR-PO, dont try to edit/overwrite quantities
--Doubt 2; Is it possible to consolidate the PRs/Refer the PRs of different materials of same purchase organisation,can be created in one RFQ .
Yes, this is possible
Regards
Dheeraj

Similar Messages

Questions on Rules-Based ATP and Purchase Requisitions for STOs

Hello experts,
We are working on rules-based ATP configuration and have several questions about the functionality. Iu2019m hoping that some of you are using this functionality and can help give us direction.
In our environment we have multiple distribution centers and multiple manufacturing plants. We want to confirm sales orders against stock and production orders in any of those plants, depending on the locations that have stock or planned production. For example, we will place a sales order against plant A. If there is not enough stock in plant A then rules-based ATP will use location determination to check in plant B, then C. The scope of check on the ATP check will include stock and released production orders. We will configure plant A as the u201Cconsolidation locationu201D so if stock is found in plants B or C then stock transport orders will automatically be created to move the stock to plant A before shipping to the customer.
We have configured rules-based ATP and this functionality is working well in our Development system. The ATP check is executed and uses the rules-based ATP to find eligible stock in other plants. The system is also creating purchase requisitions to move the stock to the consolidation plant.
Our first concern is that there doesnu2019t appear to be any firm linkage between the sales order and the resulting purchase requisition. For example, if we create sales order 123 for plant A and the rules-based ATP finds stock in plant B it automatically creates a purchase requisition 987 to move the stock from plant B to plant A. However, there doesnu2019t appear to be a linkage between sales order 123 and purchase requisition 987. For instance, if we delete sales order 123 the purchase requisition doesnu2019t get deleted.
Our second concern is that the quantity on the purchase requisition can still be confirmed against later sales orders. For example, say the above scenario resulted in a purchase requisition 987 that consumed all the stock available in plant B. We then create a second sales order 456 for the same product. Plant A is out of stock so the rules-based ATP looks in plant B. We would expect that plant B would also not have any stock because itu2019s all been consumed by the purchase requisition. Instead, the system creates a second purchase requisition to move quantity from plant B to plant A. Itu2019s as if the system doesnu2019t realize that the purchase requisition 987 is already planning to move stock out of plant B.
Does anyone have any thoughts or suggestions on these two scenarios? Is there a way to configure the system so there is a hard linkage between the sales order and the purchase requisition so that if the sales order is deleted then the purchase requisition is also deleted? Should ATP realize that purchase orders are consuming inventory and not allow later sales orders to confirm against that same inventory? Any advice or experience would be greatly appreciated.
Thanks,
David Eady
Application Delivery Team Lead
Propex, Inc.

Hi,
The scheduling is done in SCM, and from there, whenever the RBA is triggered, the calculation is done always with the old route in SCM. Until you get back to R/3 this is when your route is determined. But the ATP check is always with the original route. So the idea would be that you change the values of the route while still in APO, this is possible via the user exit. Should be done in scheduling in APO.
Hope this information is helpful.
Regards,
Tibor

FI MM integration with purchase requisition

Hi,
For FI MM integration - acquire asset through MM - the process is -
1) create asset master
2) Purchase requisition
3) PO
4) Assign asset master to PO
5)Goods receipt
It is difficult to create an asset master in advance, so the solution is to create purchase requisition without account assignment.
I would like to know whether this is possible. because once we select Account assignment category "A" system does not allow us to save the Purchase requisition.
Can someone pl. help me understand how to achieve this.
Thank you
- Vedavatee

Hi vedavatee,
You need to assign Asset Number since PR when you are using Account Assignment A.

Error in new purchase requisitions, for already deliverd materials

Dear all,
I have a problem with newly created purchase requisitions, although material was partially delivered and no delivery is expected anymore.
For example I have ordered 1767kg of oil and a total sum of 1766.2kg was deliverd. This means only a minor amount of material was not deliverd and only 80gramm are missing. The purchase value key allows a 5% over and under delivery.
Usually I would expect, that because of the purchasing value key of 5 % over and under deliverance allowence this situation should not occur anymore. Additionally at the time of goods receipt the key of final delivery was set and the purchase order is updated correctly.
But when I run the MRP again I will have another purchase requisition. The dependend requiement of the material above still existis as production is not finished yet or this is still a planned order.
What keys do I need to set in total for allowing a "partial delivery"?
- Purchaseing value key in the material master
- Delivery completed at the time of goods receipt
Maybe this question is to basic as I cannot find any questions / answers related to this issue here in the forum.
In some points, I found that I need to set up the vendor accordingly to set up partial deliveries. But I cannot find the right setting to allow the vendor to do so. I use MK02 for the change of the vendor settings.
Thank you very much for your support!
With best greetings,
Bjoern

Hello Jürgen,
yes after thinking about this issue again, I think this might not be an appropriate solution. Now I am thinking about other possibilities.
1) Automatically change the value in the production order at the time of saving MIGO - will not create any more missing material messages and no new purchase requisitions .
2) Errror message, that for this positions no more postings are possible as the purchase order still remains "open"
3) I need to find the customizing of the indicator "delivery completed". At the moment I just dont see, the influence of this indicator.
Sorry for my "stupid" questions, but I am quiete new to these MM topics. Up to now I was always doing only PP and QM but our collegue for MM has left the team and there are some open issues which now belong to me. Lucky me.
I have created a new posting at:
With best greetings,
Bjoern

Error in creation of purchase requisition

Hello Sap Guru,
When we are trying to create a purchase requisition under t.code ME51N, we are getting error message "enter valuation price"?
If anyone can please explain the reason & solution of this error.
Thanks In advance
Deepak Garg

{code)When we are trying to create a purchase requisition under t.code ME51N, we are getting error message "enter valuation price"?{code)
Hi,
it is sap standard process when you create PR and if material master record exist the price is automatically taken from the valuation price field. if record not exist enter lum sum price of requested material price.
When purchase guy create po with reference to Pr they can change valuation price also.
In custommization for Purchasing under Purchase Requisition -> Define Screen Layout at Document Level, you can set price and price unit. The Valuation price field can be set as a mandatory or optional input field.

Help needed for enhancement in Purchase requisition

Hi all,
Our client uses me59n to generate PO's automatically using purchase requisitions.
Now, the requirement is ...
If net Purchase value is 0 in purchase requisition, then
Free(UMSON) field in Purchase order shoud be "checked".
lemme explain the steps a bit detail.
1. lots of purchase requisitions will be created in me51n.
2. Client will use me59n to generate PO's automatically, using Purchase requisitions.
3. purchase orders will be created.
3. Now, i am in search of a badi/user exit , which will
     if netPurchasevalue(gswrt) = 0
        (free)umson = X.
     endif.
so , i need a enhancement, which links both fields(gswrt) from purReq & (umson) in PO.
please lemme know if anybody have experience on similar issues earlier.
Regards.
santosh.

Hi,
Try implementing the BADI -ME_PROCESS_PO_CUST ...the method "PROCESS_ITEM" can be used to do the check that you want...
Thanks,
Renjith

Service Number is not getting updated in the Purchase Requisition

Hi All,
When i create a Service PR using bapi BAPI_REQUISITION_CREATE FM , service details ( Service number, Qty, Gross price, ) are not getting updated in Service tab of Purchase requisition transaction. I am passing all the services related parameters in the FM.
Please clarify this.
Thanks for the help.
Vinoth

Hi Vinoth,
Are you getting any error in the return table?Can you show your coding?
Regards,
ravi

Purchase requisition is not being displayed in FM area, CJIA

Hi
Project cash management is activated in our system, when creating purchase requisition from project builder with account assignment 'Q' system does not generating any document in FM area (CJIA). Contradicting to this, system generating document in FM area when creating purchase requisition through ME51N transaction with account assignment Q and setting project WBS to account assignment object.
Later, comparing both purchase requisitions using ME5J, field committed item showing different values (default layout do not display this field, need to added from change layout settings). Can any one help us to find the settings which derives the committed item field in purchase requisition?
Screen shots are attached for detailed understanding.
Thanks

Sanjeev,
In EBAN table both records are present with special stock indicator Q. But these documents are not available in second table COOI.
In customizing, KOAB for order category 20 (network) don't have indicator commitment management, whereas different order category having this indicator. Possibly, this would be causing the issue?? if so please help us in this direction. One more point that component with item category L (non-stock) are displayed in CJIA report.
Checked OPSV and found both the check boxes are ticked for order category 20.
Thanks

Purchase Requisition not getting generated in APO

Hi,
I am facing an issue in APO. Once I confirm a sales order, I have to run the Product Heuristic in APO to generate the purchase requisition through rrp3. The problem is the purchase requisition is getting generated without the PR number. The line does not show the number and also the purchase req is not reflecting in ECC. Please refer the screenshot. Kindly help me with this.
Thanks & Regards,
Raja S

Hi Guys,
Sorry for the delayed response. Now got another issue. My CIF model for a Sales Order is not getting activated. I also cleared the queue in APO through /sapapo/cq and then start running the CIF. But it runs for a long period.
What could be the other possible issues with CIF model activation?
I am getting a message box like the below when try to activate the CIF. I keep ignoring the message and trying to run the CIF. But still I am unable to resolve. Kindly help
After resolving this only, I can go for the above mentioned issue. I sincerely thank all your support.
Regards
Raja S

Purchase Requisition Is Being Getting Created In APO But not being publishe

On doing, SNP Location Heuristics on one of our item, purchase requisition is being getting created in APO (We are able to see the same in RRP3) but the same is not being getting published in ECC. On doing CCR of the said location - product combination, it is showing Error u201C182u201D. We have checked the following parameters :-
Item is an APO Item i.e. X0.
It is having a proper Purchasing Group.
As This be a purchase item. So, it is having a valid single Purchase Info Record.
Item Has Not Been Blocked At Any Level.
Vendor From Whom This Item is being getting procured is also open (Not Blocked).
Please suggest what else to be checked and what else can be the reason for non-flowing of purchase requisition from APO to ECC.
Thanks & Best Regards,
Sanjeev Chugh

Hi Sanjeev,
Please check change pointers if any and send them to ECC. Check the order in the planning book whether it has picked the same source for which there is a Purchase info record. If these all are fine then You send them to ECC from the CCR then check the log in ECC through CFG1 tcode.
Regards,
Kishore k Reddy

Release strategy for purchase requisition does not kick in

Hi Gurus!
I've been struggling with this issue for some weeks now.
I have set up the release strategy configuration for purchase requisitions with classifications.
However, if I create a purchase requisition the release functionality is not taken into account by the system.
See below some more information regarding my configuration:
1. I've created a new characteristic "REL_PR_GROUP". Status: released, Multiple values, Number of Chars 3, 7 values (TR1, TR2, TR3....TR7), Table name: CEBAN, Field name: EKGRP, Procedure for value assignment set to not ready for input.
2. I've created a new class: "REL_PR_ANPC". Class type 032, Status: released, Same classification: do not check, Char: "REL_PR_GROUP"
3. I have one release group "T1", Rel. object 1, OverReqRel is marked, Class: "REL_PR_ANPC"
4. I have 5 release codes. Grp: T1, Code: 01....05
5. I have 2 release indicators:
"R = Released", Rel. for ordering is marked, Changeabil: 4, Value chgs. 100,0
"X = Blocked", Changeabil: 4, Value chgs. 100,0
6. I have 1 release strategy:
"T1 with Grp T1"
- one release group, 01 Manager
- release prerequisites not applicable because of only one release group
- release status, nothing marked = blocked, 01 marked = released
- classification, purchasing group is TR1 or TR2 or TR3 or TR4 or TR5 or TR6 or TR7
I intentionally kept the configuration as simple as possible so I can try to get it working first.
Now if I create a purchase requisition for an item with release group T1, I would expect the release strategy to be activated. However, this is not the case. I don't see the "release status" tab in the PR, and if I try to relase via ME54 the system says the PR is not relevant for release.
Could you please assist in getting this working?

Hi,
Have you checked in CL30/CL30N if your release strategy is derived successfully?
See section 3 of Note 365604. A small section of it:
You can use transaction CL30 search for an object using the data
of the purchase requisition/purchase order. Here, it is important
that the object search determines exactly one strategy. If this
is not the case, this indicates that there are overlapping
strategies in the system or that the release strategies in
Customizing do not correspond with those from transaction CL24.
See the previous point. If the object search returns more than
one result, the system subsequently determines an incorrect
release strategy or no release strategy at all.
If it is derived successfully, next, check the user exit EXIT_SAPLEBND_001 as per Note 371667:
The following assignment statement has to exist within activated SAP
enhancements M06B0002 (include zxm06u13) and M06B0005 (include zxm06u31)
for purchase requisitions:
E_CEBAN = I_CEBAN.
Regards,
Purnima.

Purchase requisition report.

Hi,
      Is there any standard report for purchase requisitions, showing purchase requistion number, user created, plant and some basic stuff like that.
      Can anyone pls assist me with this.
thanks in advance,
Ravi Boppana

Hi,
     ME5A has pretty much all the information we are looking for. Thank you very much. But is there a way that we can restrict users to see their own requisitions. Ideally we dont want a user to see requisitions created by other users.
    If there is some way like that, it would be perfect for our situation.
    Thank You very much
Ravi Boppana

Purchase Requisition Analysis

hello Experts,
I saw one statement some where it is...
Generated a report which gives PR(Purchase Requisition) analysis using ALV.
Can anyone explain me what is the meaning of this one and what is the business scenario behind this PR analysis reports
Thanks in advanse,
SRI

hello Experts,
I saw one statement some where it is...
Generated a report which gives PR(Purchase Requisition) analysis using ALV.
Can anyone explain me what is the meaning of this one and what is the business scenario behind this PR analysis reports
Thanks in advanse,
SRI

Generated a report which gives PR(Purchase Requisition) analysis using ALV.

hi experts,
please give me tables and fields for following report, and also exlain me briefly,
Generated a report which gives PR(Purchase Requisition) analysis using ALV.
thanks in advance,
radhakrishna

Hi
please find this report which link SO PO PR and Prd Ord and there status.
>
REPORT z_so_info.
TABLES: vbak, vbap, afko, afpo.
*Field catalog
TYPE-POOLS: slis.
DATA: lv_repid TYPE sy-repid VALUE sy-repid,
xfield TYPE slis_t_fieldcat_alv,
afield TYPE slis_fieldcat_alv.
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(25) text-002.
SELECT-OPTIONS: so_so FOR vbak-vbeln OBLIGATORY.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN END OF BLOCK b1.
SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME TITLE text-003.
PARAMETERS:
p_kunnr LIKE vbak-kunnr, " sold-to
p_kunwe LIKE vbak-kunnr. " ship-to
SELECTION-SCREEN END OF BLOCK b2.
*Constants
CONSTANTS: c_zor TYPE vbak-auart VALUE 'ZOR',
c_we TYPE vbpa-parvw VALUE 'WE',
c_ag TYPE vbpa-parvw VALUE 'AG'.
c_space TYPE space.
*Ranges
RANGES: ra_parvw FOR vbpa-parvw,
ra_kunnr FOR vbpa-kunnr.
*Tables
DATA: BEGIN OF gt_output OCCURS 0,
vbeln LIKE vbak-vbeln, " sales order number
posnr LIKE vbap-posnr, " SO item number
matnr LIKE vbap-matnr, " material number
sh LIKE vbpa-kunnr, " Ship-to
sp LIKE vbpa-kunnr, " Sold-to
lifnr LIKE ekko-lifnr, " Vendor
bstnk LIKE vbak-bstnk, " PO number
banfn LIKE vbep-banfn, " Purchase requi
po_st TYPE char30, " PO status text
pstyv TYPE vbap-pstyv, " Item catagory
aufnr LIKE afpo-aufnr, " Production Order
prd_stat TYPE string, " Prd order status
END OF gt_output.
DATA: wa_output LIKE gt_output.
FIELD-SYMBOLS: <fs_output> LIKE gt_output.
*Table for sales order and PO
TYPES : BEGIN OF gs_data,
vbeln TYPE vbak-vbeln,
posnr TYPE vbap-posnr,
pstyv TYPE vbap-pstyv,
matnr TYPE vbap-matnr,
END OF gs_data.
DATA: gt_data TYPE STANDARD TABLE OF gs_data,
wa_data TYPE gs_data.
*Table for Production Orders
TYPES: BEGIN OF gs_prd,
aufnr TYPE afpo-aufnr,
posnr TYPE afpo-posnr,
kdauf TYPE afpo-kdauf,
kdpos TYPE afpo-kdpos,
wepos TYPE afpo-wepos, "Goods Receipt Indicator
elikz TYPE afpo-elikz, "Delivery Completed Indicator
objnr TYPE aufk-objnr, "Object number
getri TYPE afko-getri, "Confirmed Order Finish Date
gltri TYPE afko-gltri, "Actual finish date
END OF gs_prd.
DATA: gt_prd TYPE STANDARD TABLE OF gs_prd,
wa_prd TYPE gs_prd.
*Table for partner data
TYPES: BEGIN OF gs_partner,
vbeln TYPE vbak-vbeln,
posnr TYPE vbap-posnr,
parvw TYPE vbpa-parvw,
kunnr TYPE vbpa-kunnr,
END OF gs_partner.
DATA: gt_partner TYPE STANDARD TABLE OF gs_partner,
wa_partner TYPE gs_partner.
TYPES: BEGIN OF gs_po,
ebeln TYPE ekkn-ebeln,
ebelp TYPE ekkn-ebelp,
vbeln TYPE ekkn-vbeln,
vbelp TYPE ekkn-vbelp,
END OF gs_po.
DATA: gt_po TYPE STANDARD TABLE OF gs_po,
wa_po TYPE gs_po.
TYPES: BEGIN OF gs_preq,
vbeln TYPE vbep-vbeln,
posnr TYPE vbep-posnr,
banfn TYPE vbep-banfn,
END OF gs_preq.
DATA: gt_preq TYPE STANDARD TABLE OF gs_preq,
wa_preq TYPE gs_preq.
TYPES: BEGIN OF gs_po_stat,
ebeln TYPE ekko-ebeln,
procstat TYPE ekko-procstat,
lifnr TYPE ekko-lifnr,
END OF gs_po_stat.
DATA: gt_po_stat TYPE STANDARD TABLE OF gs_po_stat,
wa_po_stat TYPE gs_po_stat.
*Field symbols
FIELD-SYMBOLS: <fs> TYPE tj02t-txt04,
<fs_temp> TYPE tj02t-txt04,
<fs_stat> TYPE char30.
START-OF-SELECTION.
PERFORM fr_build_range.
PERFORM fr_get_data.
PERFORM fr_build_fc.
PERFORM fr_output.
*& Form fr_get_data
text
--> p1 text
<-- p2 text
FORM fr_get_data.
*Get SO
SELECT avbeln aposnr apstyv amatnr
FROM vbap AS a
JOIN vbak AS b
ON avbeln = bvbeln
JOIN vbpa AS c
ON bvbeln = cvbeln
INTO TABLE gt_data
WHERE b~vbeln IN so_so
AND b~auart EQ c_zor "Only Sales Orders
AND c~kunnr IN ra_kunnr. "from selection screen
DELETE ADJACENT DUPLICATES FROM gt_data COMPARING vbeln posnr.
*get data of the production order
IF NOT gt_data[] IS INITIAL.
SELECT aaufnr aposnr akdauf akdpos awepos aelikz
b~objnr
FROM afpo AS a
JOIN aufk AS b
ON aaufnr = baufnr
INTO TABLE gt_prd
FOR ALL ENTRIES IN gt_data
WHERE a~kdauf EQ gt_data-vbeln
AND a~kdpos EQ gt_data-posnr.
ENDIF.
*Get partner data
IF NOT gt_data[] IS INITIAL.
SELECT vbeln posnr parvw kunnr
FROM vbpa
INTO TABLE gt_partner
FOR ALL ENTRIES IN gt_data
WHERE vbeln EQ gt_data-vbeln.
ENDIF.
*Get Purchase Order
IF NOT gt_data[] IS INITIAL.
SELECT ebeln ebelp vbeln vbelp
FROM ekkn
INTO TABLE gt_po
FOR ALL ENTRIES IN gt_data
WHERE vbeln EQ gt_data-vbeln
AND vbelp EQ gt_data-posnr.
SELECT vbeln posnr banfn
FROM vbep
INTO TABLE gt_preq
FOR ALL ENTRIES IN gt_data
WHERE vbeln EQ gt_data-vbeln
AND posnr EQ gt_data-posnr.
ENDIF.
IF NOT gt_po[] IS INITIAL.
SELECT aebeln aprocstat a~lifnr
FROM ekko AS a
JOIN ekpo AS b
ON aebeln = bebeln
INTO TABLE gt_po_stat
FOR ALL ENTRIES IN gt_po
WHERE b~ebeln EQ gt_po-ebeln
AND b~ebelp EQ gt_po-ebelp.
ENDIF.
*Move data to output table
LOOP AT gt_data INTO wa_data.
wa_output-vbeln = wa_data-vbeln.
wa_output-posnr = wa_data-posnr.
wa_output-pstyv = wa_data-pstyv.
wa_output-matnr = wa_data-matnr.
READ TABLE gt_po INTO wa_po WITH KEY vbeln = wa_data-vbeln
vbelp = wa_data-posnr.
IF sy-subrc EQ 0.
wa_output-bstnk = wa_po-ebeln.
READ TABLE gt_po_stat INTO wa_po_stat WITH KEY ebeln = wa_po-ebeln.
IF sy-subrc EQ 0.
wa_output-lifnr = wa_po_stat-lifnr.
CASE wa_po_stat-procstat.
WHEN '01'.
wa_output-po_st = 'Version in process'.
WHEN '02'.
wa_output-po_st = 'Active'.
WHEN '03'.
wa_output-po_st = 'In release'.
WHEN '04'.
wa_output-po_st = 'Partially released'.
WHEN '05'.
wa_output-po_st = 'Released Completely'.
WHEN '08'.
wa_output-po_st = 'Rejected'.
ENDCASE.
ENDIF. "inner read subrc
ENDIF. "outer read subrc
READ TABLE gt_preq INTO wa_preq WITH KEY vbeln = wa_data-vbeln
posnr = wa_data-posnr.
IF sy-subrc EQ 0.
wa_output-banfn = wa_preq-banfn.
ENDIF.
READ TABLE gt_prd INTO wa_prd WITH KEY kdauf = wa_data-vbeln
kdpos = wa_data-posnr.
IF sy-subrc EQ 0.
wa_output-aufnr = wa_prd-aufnr.
*get the purchase requisition for production order as well
SELECT SINGLE banfn
FROM ebkn
INTO wa_output-banfn
WHERE aufnr EQ wa_prd-aufnr.
*Get the status of the production order
PERFORM fr_get_prd_stat USING wa_prd-objnr
CHANGING wa_output-prd_stat.
ENDIF. " sy-subrc
READ TABLE gt_partner INTO wa_partner WITH KEY vbeln = wa_data-vbeln
parvw = c_we.
IF sy-subrc EQ 0.
wa_output-sh = wa_partner-kunnr.
ENDIF.
READ TABLE gt_partner INTO wa_partner WITH KEY vbeln = wa_data-vbeln
parvw = c_ag.
IF sy-subrc EQ 0.
wa_output-sp = wa_partner-kunnr.
ENDIF.
APPEND wa_output TO gt_output.
CLEAR: wa_data, wa_prd,wa_partner,wa_output.
ENDLOOP.
ENDFORM. " fr_get_data
*& Form fr_build_range
text
--> p1 text
<-- p2 text
FORM fr_build_range .
*Range for partner function
MOVE 'I' TO ra_parvw-sign.
MOVE 'EQ' TO ra_parvw-option.
MOVE 'SH' TO ra_parvw-low. " we
APPEND ra_parvw.
CLEAR ra_parvw.
MOVE 'I' TO ra_parvw-sign.
MOVE 'EQ' TO ra_parvw-option.
MOVE 'SP' TO ra_parvw-low. " ag
APPEND ra_parvw.
CLEAR ra_parvw.
*Range for ship-to and sold-to
MOVE 'I' TO ra_kunnr-sign.
MOVE 'EQ' TO ra_kunnr-option.
MOVE p_kunnr TO ra_kunnr-low.
APPEND ra_kunnr.
CLEAR ra_kunnr.
MOVE 'I' TO ra_kunnr-sign.
MOVE 'EQ' TO ra_kunnr-option.
MOVE p_kunwe TO ra_kunnr-low.
APPEND ra_kunnr.
CLEAR ra_kunnr.
ENDFORM. " fr_build_range
*& Form fr_build_fc
text
--> p1 text
<-- p2 text
FORM fr_build_fc .
sales order number
afield-fieldname = 'VBELN'.
afield-seltext_s = 'Sales #'.
afield-ref_tabname = 'VBAK'.
APPEND afield TO xfield. CLEAR afield.
sales ITEM number
afield-fieldname = 'POSNR'.
afield-seltext_s = 'Item #'.
afield-ref_tabname = 'VBAP'.
APPEND afield TO xfield. CLEAR afield.
Material Number
afield-fieldname = 'MATNR'.
afield-seltext_s = 'Material #'.
afield-ref_tabname = 'VBAP'.
afield-outputlen = 10.
APPEND afield TO xfield. CLEAR afield.
*Vendor Number
afield-fieldname = 'LIFNR'.
afield-seltext_s = 'Vendor Num.'.
afield-ref_tabname = 'EKKO'.
APPEND afield TO xfield. CLEAR afield.
ship-to-party
afield-fieldname = 'SH'.
afield-seltext_s = 'Ship-to'.
afield-ref_tabname = 'VBPA'.
APPEND afield TO xfield. CLEAR afield.
sold-to-party
afield-fieldname = 'SP'.
afield-seltext_s = 'Sold-to'.
afield-ref_tabname = 'VBPA'.
APPEND afield TO xfield. CLEAR afield.
*PO number
afield-fieldname = 'BSTNK'.
afield-seltext_s = 'PO NUM'.
afield-ref_tabname = 'EKKO'.
APPEND afield TO xfield. CLEAR afield.
*PO status
afield-fieldname = 'PO_STAT'.
afield-seltext_s = 'Step'.
afield-ref_tabname = 'zbacklog_v2'.
APPEND afield TO xfield. CLEAR afield.
*PO step status
afield-fieldname = 'PO_ST'.
afield-seltext_s = 'PO.Status'.
afield-ref_tabname = 'zbacklog_v2'.
APPEND afield TO xfield. CLEAR afield.
*Purchase requisition
afield-fieldname = 'BANFN'.
afield-seltext_s = 'Pur. Req.'.
afield-ref_tabname = 'VBEP'.
APPEND afield TO xfield. CLEAR afield.
*Item catagory
afield-fieldname = 'PSTYV'.
afield-seltext_s = 'Itm. Catg'.
afield-ref_tabname = 'VBAP'.
APPEND afield TO xfield. CLEAR afield.
*Prodcution Order number
afield-fieldname = 'AUFNR'.
afield-seltext_m = 'Prod.Order'.
afield-ref_tabname = 'AFKO'.
APPEND afield TO xfield. CLEAR afield.
*PRODCUTION status
afield-fieldname = 'PRD_STAT'.
afield-seltext_s = 'Prd. Step'.
afield-ref_tabname = 'zbacklog_v2'.
afield-outputlen = 20.
APPEND afield TO xfield. CLEAR afield.
*PRODUCTION step status
afield-fieldname = 'PRD_ST'.
afield-seltext_s = 'Prd. Status'.
afield-ref_tabname = 'zbacklog_v2'.
APPEND afield TO xfield. CLEAR afield.
ENDFORM. " fr_build_fc
*& Form fr_output
text
--> p1 text
<-- p2 text
FORM fr_output .
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
i_callback_program = sy-repid
I_CALLBACK_PF_STATUS_SET = ' '
I_CALLBACK_USER_COMMAND = ' '
I_STRUCTURE_NAME =
IS_LAYOUT =
it_fieldcat = xfield[]
i_default = 'X'
i_save = 'A'
TABLES
t_outtab = gt_output
EXCEPTIONS
program_error = 1
OTHERS = 2.
ENDFORM. " fr_output
*& Form fr_get_prd_stat
text
-->P_WA_PRD_OBJNR text
FORM fr_get_prd_stat USING p_objnr CHANGING p_prd_stat.
DATA: lt_status TYPE STANDARD TABLE OF jstat,
wa_status TYPE jstat,
lv_status TYPE tj02t-txt04,
lv_temp2 TYPE char5,
lv_buff TYPE string.
CALL FUNCTION 'STATUS_READ'
EXPORTING
client = sy-mandt
objnr = p_objnr
only_active = 'X'
TABLES
status = lt_status
EXCEPTIONS
object_not_found = 1
OTHERS = 2.
LOOP AT lt_status INTO wa_status.
IF wa_status-stat(1) EQ 'I'.
SELECT txt04 FROM tj02t
INTO lv_status
WHERE istat EQ wa_status-stat
AND spras EQ 'E'.
ENDSELECT.
lv_temp2 = lv_status.
CONCATENATE lv_temp2 p_prd_stat INTO p_prd_stat
SEPARATED BY ','.
ENDIF.
CLEAR: wa_status, lv_status, lv_temp2.
ENDLOOP.
lv_buff = p_prd_stat.
*Status of Production Order
IF lv_buff CS 'CRTD'.
p_prd_stat = 'Not Active'.
ENDIF.
IF lv_buff CS 'REL'.
IF lv_buff CS 'GMPS'.
p_prd_stat = 'Printed In Prod'.
ELSE.
p_prd_stat = 'Printed'.
ENDIF.
ENDIF.
IF lv_buff CS 'TECO'.
p_prd_stat = 'Technically Compt.'.
ENDIF.
ENDFORM. " fr_get_prd_stat
>

Purchase requisition aginst purchase order and mat.dc.no.

Hi experts,
i want to develop a report PR_NO ITEM_NO QUANT PO_NO ITEM QANTY MAT.DOC.NO
I USED EBAN EKPO AND MSEG TABLE
but there is no relation between EBAN AND EKPO.(also EKBE )
how should i fetch the data PRNO AGAINST PO.
In my comany there is no functional consultant.
THANKS
AJAY.

The relation is
EKPO-BANFN = EBAN-BANFN
EKPO-EBELN = EKBE-EBELN
EKPO-EBELP = EKBE-EBELP
EKBE-BELNR is your material doc
EBAN-BANFN-Purchase Requisition Number
EBAN-BNFPO-Item Number of Purchase Requisition
EKPO-EBELN-Purchasing Document Number
EKPO-EBELP-Item Num
EKPO-MENGE - PO qty
EKBE-MENGE - Posted quantity in Mat.doc

Consolidation of Purchase Requisitions

Similar Messages

Maybe you are looking for